Related
Doe's any body know where I can download full version of TouchFlo and TouchCube for my Kaiser!!!
Google.com is your friend.
There are lots of versions of the cube out there so there isn't an easy answer.
I have been messing around with the cube tonight and i think the nicest "free" version that you can get going yourself is:
http://forum.xda-developers.com/showthread.php?t=336234
This is slither's flash based cube. You will need to install FtouchFLO and Flash Lite to get it working. If you read through that thread you should get enough info to get you going.
If you don't want to do the legwork you have a few options:
1) Download a ROM with a Cube cooked in
2) Download UltimateLauncher, a nice desktop shell that emulates a cube type effect (as well as other animation options)
3) Try and then buy either Touch Commander or Spb Mobile Shell. Both have "Cube-like" menus that you can use.
Thanks man!!!Serbia thanks you
HTC TouchFlo and Cube vs. scroll bar
I'm running one of the cooked ROMs with the cube and touchflo... I noticed that I have to add most programs as an exception in the touchflo configuration otherwise the cube will launch or the program will minimize if I move the scroll bar too quickly. Is there a way to adjust touchflo to only recognize slides that are done in the center of the screen? Otherwise I have to add every program with a scroll bar to the exception list because touchflo messes up the scrolling.
Does the stock HTC Touch have this problem?
Wayno-san said:
I'm running one of the cooked ROMs with the cube and touchflo... I noticed that I have to add most programs as an exception in the touchflo configuration otherwise the cube will launch or the program will minimize if I move the scroll bar too quickly. Is there a way to adjust touchflo to only recognize slides that are done in the center of the screen? Otherwise I have to add every program with a scroll bar to the exception list because touchflo messes up the scrolling.
Does the stock HTC Touch have this problem?
Click to expand...
Click to collapse
I used to adjust the Timeout using Schaps TouchFlo Config tool, the lower you make this number the quicker you have to swipe to lauch the Cube.
So long as I scrolled at a sensible speed the cube would not launch.
But that's in the past, Cubes are pretty, but I never use them, other than to show off.
Thanks
Dave.
I wish I could just have the picture dialing instead of the hole cube. I guess a one sided cube. Doesnt really make sense does it.
One place to check
HTC Home comes with most ROMS now standard with a few exections but I cant exactly remember where found my Touchflow version but i included it below also check out this site because they have a great htc home screen customizer http://www.pocketemu.com/download.html I hope this helps.
I think the TouchFlo 3D is fantastic for "showing off" your Touch Diamond, but it's a bit gimmicky, and slightly cumbersome, so I'd like to be able to turn it on and off when it suits me.
Out of the box, to do this you need to go into the homescreen settings and select TouchFlo 3D, or, deselect it, and reselect all your usual homescreen plugins - a bit of a pain.
However, I've realised that browsing to the "Manilla exe" in the Windows directory turns on the TouchFlo without affecting your homescreen plugins. If you then kill the manilla process using a a Task Manager which shows processes, you're straight back to your normal homescreen. I've made a shortcut in the Start Menu so I can toggle between the two relatively quickly and easily.
But, I'm looking for some clever person out there to make a simple app which toggles between TouchFlo 3D and normal homescreens at the press of a button. I'm sure it can't be that difficult (for someone who knows what they're doing)??!! It just needs to launch the Manilla exe and then kill it when you want to turn it off.
Anyone fancy having a go?
Cheers
Simon.
It is possible to toggle between spb mobile 2 screens and touchflo 3d though.
Kill Manila.exe
Has anybody come up with an automated(one click) way of killing the Manila.exe process ?
Mortscript
Create a script with Mortscript to check for the presence of manila.exe.
If not present, start it.
If present, kill it.
Create a shortcut to the script in \Windows\Start Menu\Programs
Assign this shortcut to button 1.
Simon D said:
I think the TouchFlo 3D is fantastic for "showing off" your Touch Diamond, but it's a bit gimmicky, and slightly cumbersome, so I'd like to be able to turn it on and off when it suits me.
Out of the box, to do this you need to go into the homescreen settings and select TouchFlo 3D, or, deselect it, and reselect all your usual homescreen plugins - a bit of a pain.
However, I've realised that browsing to the "Manilla exe" in the Windows directory turns on the TouchFlo without affecting your homescreen plugins. If you then kill the manilla process using a a Task Manager which shows processes, you're straight back to your normal homescreen. I've made a shortcut in the Start Menu so I can toggle between the two relatively quickly and easily.
But, I'm looking for some clever person out there to make a simple app which toggles between TouchFlo 3D and normal homescreens at the press of a button. I'm sure it can't be that difficult (for someone who knows what they're doing)??!! It just needs to launch the Manilla exe and then kill it when you want to turn it off.
Anyone fancy having a go?
Cheers
Simon.
Click to expand...
Click to collapse
thought thats called SecondToday?
ToggleManila.mscr
I have the same problem, that I want to turn on TouchFlo 3D, but still want to keep my "Classic" Today Screen intact.
Although I tried SecondToday, however it cannot display the internal plugins such as Tasks, Calendar and Date
Thanks to wensing's suggestion, I created this simple script. If you want to run the script, please follow the instructions below.
a) The first thing you need to do is to disable the TouchFLO 3D from Today Panel Plugins, then activate your favourite Today Plugins (except TF3D)
b) Install MortScript
c) Put the "ToggleManila.mscr" in any folder you prefer.
d) Create a shortcut to this script, name it (eg. ToggleToday.lnk) and put the shortcut inside the folder "\Windows\Start Menu\Programs".
e) Go to Settings->Buttons, and simply assign "Button 1(Hold)" to point to the ToggleToday shortcut.
Of course you are free to experiment with other settings or assign it any other buttons.
Another thing to note is, because TF3D will "take over" the Home hardware button, I have no choice but to kill it, so that the classic Today Screen can be activated after TF3D is killed. However this also means the next time you activate TF3D, it will take some time to load. So please be patient and wait for the TF3D while it is loading.
Anyway, this is my first attempt at using MortScript, just a simple piece of work, but hope that I can bring some joy to my fellow Diamond users.
Hope that it works for you guys
Thanks Wensing
The mortscript suggestion works perfectly.
I am running SwiftBL 3.0, and when I launch the script, TouchFLO3d restarts automatically. Does this script work only on roms that have uninstallable manila?
Or do I have to edit some registry settings so that manila doesn't restart automatically?
when I try and assign a button there are no buttons to select in my menu, any ideas why?
Uncheck TF3D
oldhouse said:
I am running SwiftBL 3.0, and when I launch the script, TouchFLO3d restarts automatically. Does this script work only on roms that have uninstallable manila?
Or do I have to edit some registry settings so that manila doesn't restart automatically?
Click to expand...
Click to collapse
Have u tried to uncheck TF3D from Settings->Today->Items before launching the mortscript?
podman2004 said:
when I try and assign a button there are no buttons to select in my menu, any ideas why?
Click to expand...
Click to collapse
So far, I am using Settings->Buttons and I assign "ToggleManila" to Button1(Hold). By default this may have been assigned to other programs such as Voice Commander etc. Just replace it with "ToggleManila".
I am not familiar with other more advance programs that allow u to assign it to the other hard buttons, so I am sorry I can't advice u on that.
By the way, u might have to create a shortcut that points to the actual file where u place the ToggleManila.mscr, and then u put this shortcut (I simply name it ToggleManila.lnk) inside Windows->Start Menu->Programs before u can select "ToggleManila".
See if it works.
This works great, thanks everyone involved!
I find it better than 2nd Today because the device is much quicker without manila running.
Davey101 said:
This works great, thanks everyone involved!
I find it better than 2nd Today because the device is much quicker without manila running.
Click to expand...
Click to collapse
i second this statement. tried it and works great for me on the touch pro
Have you tried the latest ROMS??
Manila works pretty smooth and yu device will be blazing fast. I will be using it always..
charly_mx said:
Have you tried the latest ROMS??
Manila works pretty smooth and yu device will be blazing fast. I will be using it always..
Click to expand...
Click to collapse
I'm using Dutty's Diamond v1.8 (full) and used to have speed problems when launching applications, particularly after using the audio player.
TF3D is alright but it doesn't actually do anything that special. The weather screen is pretty but most of the other screens are useless, especially the horribly limited 'favourite contacts'. Now that I've got used to the standard windows today screen I prefer it.
I'm looking forward to trying out Schap's TouchXperience though!
that's work very nice
now we must wait for TFL3D tasks and who knows how this thing will be
this works great with the manila2D with the touch. One question though. The script kills the manila2D very quickly, but it does take several seconds for it to run it; any way of speeding that up?
thanks for the script
work very well
thanks for the script. great work
As Leekg has mentioned you can use TF3D and SPB Shell together.
I have left TF3D as it is and installed the SPB Shell as well. On the home screen have reprogrammed one of the Soft keys to SPB Menu -- touching that takes me to the Shell. Closing it brings me back to TF3D!
I do have a question though -- is there any way of changing the default msic player to windows media?
WM6.1 Professional(build 19213.1.0.4) RAMDisk-32MB Pagepool_32MB for Hima
Blue_Silk_Theme
GUYS Please leave Feedback!!! IT's FREE
Other Info
UC & A2D Capable
Media player 10.3
Pictures & Video (Full directory options)
Lots of reg tweeks
Added
HTC dialer skins
HTC calc skins
HTC 6 button comms manager
HTC Media Player skins
New programs folder icons
Tweeked internet settings faster searches and instant back
Screen OFF when playing music
Perfect bluetooth stereo playback
SD WIFI Card CompatableRemoved
Welcome Centre
Customer feedback CrapApps
FTouchFlo
FTouchFlo config
Clear temp
Netwowk Wizard (auto launch turned off by default)
Mode SMS
PHM Traylaunch
Quick Menu (You will need to set this up for Clear look set background image to Default_stwater_240_320.gif)
SyncroTime
FDC Taskmanager
WM5 NewMenu
WM5 Storage
WM Player 10
SoftKey Appalet
Adcanced Config
PIM Backup
Total Commander
Eten Zoom SMS
(plus all the standard stuff you'd expect in a 6.1 Rom)
There still some room left in the rom (8f)free sectors,ExtRom package
ArcsoftMMS4.2.8.1.CAB
HTC Home.2.1_1005.722v2b.CAB
HTC Audio Manager Today Plugin.CAB
MMS_enable.CAB
Office_6.1.AdobeLE.CAB
PacMan2.Invaders.CAB
UltimateLaunch.CAB
spb_gprs_v2.20(build487)_magician_wwe_1007_cid.CAB
Tcmdpocketarm.CAB
TcpmpFlashVideoBundle.CAB
Windows_Live_10.6.0034.0800.CAB
zHimaExtSetup.CAB (some ring tones and reg Tweeks
ADDED 16/09/2008
SAP_Settings (Required for Car Kits hands free audio systems)
BlueTooth ON/OFF (A quick toggle ON/OFF)
New_SMS shortcut
CamRecSvc.cpl icon
PHM Font Changer.cpl
Pocket Tweak.cpl
Removed
FTouchFlo shortcut from startup menu
Guy's All you have to do with this rom is setup quick menu and run network wizard and playDownload Rom
http://www.4shared.com/file/6325703...219213104SY395_32PP_6128Prog_32_RD_FINAL.html
My extrom
http://www.4shared.com/file/56711973/3b8a3bb4/ExtROM_19213104B.html
Try MY HTC Styled Rom same spec as above htc dark gray
http://forum.xda-developers.com/showthread.php?t=403572
Nice Work Dude...
I Will Try It...
Thanks For The Update
your last rom cant open the sms , how about this one ?
sms
ilovelihui88 said:
your last rom cant open the sms , how about this one ?
Click to expand...
Click to collapse
this one is perfect but I would have been nice if you had let me know about that on the last rom which is also all fixed now Please remember if your too lazy to leave feedback then how are we to know
Your ROM was great...
There are no bug in my xda II...
This ROM very great...thanks a lot...
not on 4shared pls
nice one swampy395...
i'll post comments later.
Tnx and keep it up.
thanks a lot
Hi there!
I tried flashing my device with this ROM (blue silk theme) but I got stuck in the align screen.
Tried tapping the cross hairline but it does not respond.
Did a hard reset and same problem on the screen alignment portion.
Had to revert back to my previous ROM (SonBlack) and everything went well including the screen alignment portion.
Any idea/s why this happened?
Great
Great rom
just installed it and it's working just fine
keep up the good work
edz536 said:
Hi there!
I tried flashing my device with this ROM (blue silk theme) but I got stuck in the align screen.
Tried tapping the cross hairline but it does not respond.
Did a hard reset and same problem on the screen alignment portion.
Had to revert back to my previous ROM (SonBlack) and everything went well including the screen alignment portion.
Any idea/s why this happened?
Click to expand...
Click to collapse
Same issue here.Tried both of the versions of this rom.Stuck in the align screen.Very dissapointed because would like to try this rom.The specs are good.
screen alignment portion
theseas said:
Same issue here.Tried both of the versions of this rom.Stuck in the align screen.Very dissapointed because would like to try this rom.The specs are good.
Click to expand...
Click to collapse
Hi guys not had this problem with hima rom's but had it with a BA rom last year did a 2-3 soft resets and then it passed screen alignment portion ok, Don't know y it happens If any body knows please let me know
Thanks in advance
swampy395
found the solution
I tried again to flash the rom.I stuck again in the alignment of the screen.Did a soft reset and then was able to align the screen.So now my hima is flashed with the swampy395's rom.Dont know though what caused this problem.As for the rom will try it and let u know swampy395.
theseas said:
Same issue here.Tried both of the versions of this rom.Stuck in the align screen.Very dissapointed because would like to try this rom.The specs are good.
Click to expand...
Click to collapse
FTouchFlo conflicts with screen alignment.
connect with activesync and go to \windows\startup
if theres a link to FTouchFlo delete it, soft reset and after the initial setup activate FTouchFlo with FTouchFlo config.
fmvl said:
FTouchFlo conflicts with screen alignment.
connect with activesync and go to \windows\startup
if theres a link to FTouchFlo delete it, soft reset and after the initial setup activate FTouchFlo with FTouchFlo config.
Click to expand...
Click to collapse
Thanks for that info friend I just got a new car and found I need SAP Settings SO I will remove the shortcut from startup add SAP and upload new rom By fri thanks again
swampy395
Success!!!
fmvl said:
FTouchFlo conflicts with screen alignment.
connect with activesync and go to \windows\startup
if theres a link to FTouchFlo delete it, soft reset and after the initial setup activate FTouchFlo with FTouchFlo config.
Click to expand...
Click to collapse
Tried to install the ROM again and followed Theseas' technique of doing a soft reset at screen alignment. Did not work for me. Good for you Theseas.
Tried fmvl's method and it worked!!! Thanks for the helpful solution.
Nice ROM swampy395. Keep up the good work. Two thumbs up for you!!!
edz536 said:
Tried to install the ROM again and followed Theseas' technique of doing a soft reset at screen alignment. Did not work for me. Good for you Theseas.
Tried fmvl's method and it worked!!! Thanks for the helpful solution.
Nice ROM swampy395. Keep up the good work. Two thumbs up for you!!!
Click to expand...
Click to collapse
Thanks guys the blue silk version is fixed now Added Sap settings and some other bits too
swampy395 said:
WM6.1 Professional(build 19213.1.0.4) RAMDisk-32MB Pagepool_32MB for Hima
Blue_Silk_Theme
GUYS Please leave Feedback!!! IT's FREE
Other Info
UC & A2D Capable
Media player 10.3
Pictures & Video (Full directory options)
Lots of reg tweeks
Added
HTC dialer skins
HTC calc skins
HTC 6 button comms manager
HTC Media Player skins
New programs folder icons
Tweeked internet settings faster searches and instant back
Screen OFF when playing music
Perfect bluetooth stereo playback
SD WIFI Card CompatableRemoved
Welcome Centre
Customer feedback CrapApps
FTouchFlo
FTouchFlo config
Clear temp
Netwowk Wizard (auto launch turned off by default)
Mode SMS
PHM Traylaunch
Quick Menu (You will need to set this up for Clear look set background image to Default_stwater_240_320.gif)
SyncroTime
FDC Taskmanager
WM5 NewMenu
WM5 Storage
WM Player 10
SoftKey Appalet
Adcanced Config
PIM Backup
Total Commander
Eten Zoom SMS
(plus all the standard stuff you'd expect in a 6.1 Rom)
There still some room left in the rom (8f)free sectors,ExtRom package
ArcsoftMMS4.2.8.1.CAB
HTC Home.2.1_1005.722v2b.CAB
HTC Audio Manager Today Plugin.CAB
MMS_enable.CAB
Office_6.1.AdobeLE.CAB
PacMan2.Invaders.CAB
UltimateLaunch.CAB
spb_gprs_v2.20(build487)_magician_wwe_1007_cid.CAB
Tcmdpocketarm.CAB
TcpmpFlashVideoBundle.CAB
Windows_Live_10.6.0034.0800.CAB
zHimaExtSetup.CAB (some ring tones and reg Tweeks
ADDED 16/09/2008
SAP_Settings (Required for Car Kits hands free audio systems)
BlueTooth ON/OFF (A quick toggle ON/OFF)
New_SMS shortcut
CamRecSvc.cpl icon
PHM Font Changer.cpl
Pocket Tweak.cpl
Removed
FTouchFlo shortcut from startup menu
Guy's All you have to do with this rom is setup quick menu and run network wizard and playDownload Rom
http://www.4shared.com/file/6325703...219213104SY395_32PP_6128Prog_32_RD_FINAL.html
My extrom
http://www.4shared.com/file/56711973/3b8a3bb4/ExtROM_19213104B.html
Try MY HTC Styled Rom same spec as above htc dark gray
http://forum.xda-developers.com/showthread.php?t=403572
Click to expand...
Click to collapse
Hi guys had a problem with FTouchFlo in this rom It's all fixed up ENJOY swampy395
I'm using Pocketmax PhoneAlarm and have the Touch Flo option enabled so it gives me the option like some of the other utilities out there to use the softkey to switch between Touch Flo Today and WM Today screens.
Every night Sprite backup soft resets my phone. I don't need to use the WM Today screen very often. I prefer to leave the phone on the Touch Flo Today screen with the small clock. I'm getting tired of having to keep switching to Manila and then minimizing the clock.
Is there a way to get the phone to boot and load Manila with the small clock?
Use a registry editor to create the key "Home.LastClockView" in HKCU/Software/HTC/Manila and set it to "1"
And/or place a shortcut to manila.exe in the startup folder?
Cheers,
Cacti
With the dawn of manila over 6.5, I'd like to request a cab to make these two beautiful interfaces separate panels. I purchased my Xperia because of the slick hardware and styling, as well as the cool concept of panels.
I know you can just check and uncheck some boxes, but I think it would be slick (as do many others) if we could put them as panels (preferably on the new R3 panel manager). If anyone has anything brewing, I'd be more than happy to test.
Someone knows how to make a panel could easily convert touchflo detacher into panels imo, I was gonna try working on it but school has caught up with me
Is it soo dif. 2 make the existing panel cab for the TF3d beta 2 cab work with the beta 3?
Would it be possible to clone the today screen and unlock it as a panel, with independant settings etc, then tick the different boxes for titanium and touchflo on the different main today? I'm not familiar with the xperia sdk etc and have never made a cab. I thinks fards said he was looking at it.
Could anyone familiar with the touchflo detatcher say how its done? And whether it can be adapted for winmo6.5?
Anyone any smart ideas? Still some really nice new manila/titanium roms coming out. Is anyone working on anything?
How about try to have a bounty on the person who can develop this???
try contacting the author of the original touchflo panel
i tired to enable manila v1 as panel in wm6.1. i no its not the same but here is my experience in case someone wants to try and devolp a panel for the new manillla....
1.new start menu must be on.
2. turning off manila from do and then loading touchflo panel leaves us with a white screen with loading....
3. if u press start at this point. the manila start menu loads and after u close the start menu......you will find that manilla in panel started......not much problem after that and everything runs fine
NOW:
i havnt tried this in wm6.5 coz that would probably require titanium start to be off.....which i dont want.
but the point is: manilla is loaded all we need to do is trigger it to show up....
just do it the old fashion way. flash a 6.5 rom, install tf3d beta 2, install the panel. switch back and forth. done
himuraken said:
just do it the old fashion way. flash a 6.5 rom, install tf3d beta 2, install the panel. switch back and forth. done
Click to expand...
Click to collapse
I tried but the beta2 didnt wanna show? I dont know whether it needs tweaking or whatever...? Any devs got any ideas?
Second Today.
http://www.freewarepocketpc.net/ppc-download-secondtoday.html
THESpideyWVU said:
Second Today.
http://www.freewarepocketpc.net/ppc-download-secondtoday.html
Click to expand...
Click to collapse
That's promising, but it would be better as a panel. Is there a way to have a second today panel which has separate tick boxes? Anyone know who was the author of tf3d panel?
ja thts a good Question...
coz i just cant get it tht its soo hard 2 change the panel...
\from beta2 to beta3 atleast? but looks like I"m wrong..
CowMix said:
Someone knows how to make a panel could easily convert touchflo detacher into panels imo, I was gonna try working on it but school has caught up with me
Click to expand...
Click to collapse
Tried at the weekend - it's easy to make a html switcher panel but this is no easier than just ticking what you want in today settings. And it's easy enough to make a show manila panel using Touchflo detacher, which then takes you to Manila home automatically, but the html panel is still truly a blank white screen not TFlo so it's not functional as it should be.
And I couldn't figure out a way that the standard today would always show Titanium. It would have to use the panel button using mortscript to close Manila, then load panel manager in order for it to work. It would be usable (just) but not satisfactory enough for me to spend time making it.
ya I tried using a simple html program launcher panel and found that although it loads up and closes the manilla program it doesn't redirect you back to the home screen after its done so you can view it, I've been looking through c++ panel documentation trying to understand how panels work.
Would Titanium be lighter detached...? I'm not really sure how to approach it from a programming perspective, but it would be amazing. The second today does work REALLY well, but I would LOVE to see it as a panel.
Quick update: The second today prog does not work! Anyone looking into this?
m1le5 said:
Quick update: The second today prog does not work! Anyone looking into this?
Click to expand...
Click to collapse
And neither does mToday. So have to be using TFDetacher to toggle between default Windows and TF3D.
Shame...anyone know who wrote TFDet or can write for it??? I'm desparate