This is pissing me off. I was trying to change the icon for a program on SPB Pocket Plus 4, so i found the icon, when i hit select, a window opened that was blank, and the phone froze. I soft reset, but when it came on. It had basically hard reset its self. All of my settings where gone, but my programs where still there. So normally i could just re-input my settings - not too bad, just takes time but things like the today screen wont work. The programs are still there but none of them show up in the today plugin list. Also a program called Internet Sharing was installed and a couple icons in the program list where changed...
Any idea what happend and/or how to fix it before i just hard reset it and reinstall everything.
so i downloaded the CAB file and installed. but it doesnt appear. i still have the bland home screen. i did a soft reset and nothing. any help?
in my mind i followed the instructions from this link http://www.freewarepocketpc.net/ppc-download-htc-home-plugin-v1-0.html to a "t".
it cant be this simple...
I dont suppose you went to Settings > Personal > Today > Items(tab) and adjusted your settings.
closet410 said:
so i downloaded the CAB file and installed. but it doesnt appear. i still have the bland home screen. i did a soft reset and nothing. any help?
in my mind i followed the instructions from this link http://www.freewarepocketpc.net/ppc-download-htc-home-plugin-v1-0.html to a "t".
Click to expand...
Click to collapse
Connect device to PC. Use Active Sync to move the (unopened/unextracted) CAB file to your device (storage card or if not main memory).
Then on the device use file explorer to find the CAB and tap on it to install it. Choose install to main memory for this CAB.
AND follow above posters advice to ensure the plugin is set to show on the Today Screen.
Mike
not that simple
jymbrittain said:
I dont suppose you went to Settings > Personal > Today > Items(tab) and adjusted your settings.
Click to expand...
Click to collapse
already done that.
ditched the original link and downloaded schen's version on these very forums. so far so good!
look for schen's HTC Home at pocketemu.com. Then download HTC Home Customizer from the same Link and use it to customize your HTC Home.
weather
i know i've seen this question asked elswhere but how do you switch the temperature on the weather to not show celceius?
closet410 said:
i know i've seen this question asked elswhere but how do you switch the temperature on the weather to not show celceius?
Click to expand...
Click to collapse
2 ways
HHC can do it for you under one of its tabs
or
Go to the weather tab on HTC Home, tap on your city name and change it from the Menu option corrosponding to the right soft key.
Play around with it first and see if you can figure things out.
I downloaded the home plug and schen's cab, but the today screen only appears as the HTC home plug should appear. I tried reinstalling the cab file, but nothing changed. I can't find it under settings.
:EDIT:
I'm not even gonna bother deleting my previous post here. That was dumb of me. I thought I was to look around in the settings... Then I checked programs. You may now bash.
Screen not responding to the stylus?
I can not for the life of me get my stylus to work on my tilt. this is my first touch device but im sure its not hard. i can tap the screen and im fine but when i go to use the stylus it wont respond. could i have disabled something by accident?
Have a screen protector??? May need to adjust the sensitivity. Don't have the exact key, but I know it's in several posts. try filtering your search with the term pressure threshold.
No, it happened to me today too
Tilt w/Duttys latest.
I was reading email, when suddenly the touch screen stopped working. I could use the DPad, but no response to touch. Opened and closed the keyboard, still no response. Soft booted and it went back to normal.
I have had it happen 2 or 3 times on my tilt with dutty previous release. Rebooted and it went back to normal.
The problem is usually related to FTouchFlo, a simple soft reset cures the issue. If you don't have FTouchFlo installed, I'm not sure what could be causing it
I can also say that the issue is coming from touchflo. happened to me twice before so i've just disabled touchflo and hasn't happened since.
Me too!!!
closet410 said:
I can not for the life of me get my stylus to work on my tilt. this is my first touch device but im sure its not hard. i can tap the screen and im fine but when i go to use the stylus it wont respond. could i have disabled something by accident?
Click to expand...
Click to collapse
Check out this thread. http://forum.xda-developers.com/showthread.php?t=337979
I did everything in it, but sometimes my screen stops and freezes for a few seconds. Sometimes it gets so bad that it freezes like every 20 or 30 seconds when I am typing something using the stylus. I don't think I have touchflow because I never installed it. I just have the stock HTC rom.
Any ideas greatly appreciated.
fone_fanatic said:
I can also say that the issue is coming from touchflo. happened to me twice before so i've just disabled touchflo and hasn't happened since.
Click to expand...
Click to collapse
same here. i removed touchflo all together
i got it working again. just had to realign the screen.
What we browser are you using?
I have an att tilt so i have internet explorer mobile and im not really feelin it to much. what browser are you guys using?
many people like the latests beta opera mobile
After a pretty nasty crash recently (screen turned to interference then total power off), I restored from my SPB backup (thank goodness for that software!)
Since then, the Dutty and HTC touch keyboard + default keyboard haven't worked right, and even re-installing the cab's seems to cause it not to be sorted.
Moreso, if I try and reboot after trying to re-install then the device locks up and never gets to the windows mobile boot screen, so I assume something is getting corrupted somewhere and causing windows not to boot.
So, can anyone please advise how to manually (since the uninstall/remove programs doesn't work in this case) remove the applications:
'duttythroy Default TouchKeyboard.cab'
'HTC Touch Keyboard + Keypad.cab'
Or advise how to extract the cabs and figure this problem out!
A bit of extra info, if it 'thinks' the keyboard/keypad is installed, I can see it in the list of keyboards available to me, but if I pick it, I get the default keyboard and the menu jumps back (I'm guessing it realised the touch keyboard/keypad wasn't working so defaulted back).
Thanks for any advise!
andyb2000 said:
After a pretty nasty crash recently (screen turned to interference then total power off), I restored from my SPB backup (thank goodness for that software!)
Since then, the Dutty and HTC touch keyboard + default keyboard haven't worked right, and even re-installing the cab's seems to cause it not to be sorted.
Moreso, if I try and reboot after trying to re-install then the device locks up and never gets to the windows mobile boot screen, so I assume something is getting corrupted somewhere and causing windows not to boot.
So, can anyone please advise how to manually (since the uninstall/remove programs doesn't work in this case) remove the applications:
'duttythroy Default TouchKeyboard.cab'
'HTC Touch Keyboard + Keypad.cab'
Or advise how to extract the cabs and figure this problem out!
A bit of extra info, if it 'thinks' the keyboard/keypad is installed, I can see it in the list of keyboards available to me, but if I pick it, I get the default keyboard and the menu jumps back (I'm guessing it realised the touch keyboard/keypad wasn't working so defaulted back).
Thanks for any advise!
Click to expand...
Click to collapse
To me, it sounds like your backup is the problem. Hard-reset and use the keyboards without restoring your files first. If they work then some application/file in your backup is causing the problem.
Hello,
I've received my Diamond a few days ago, have a little fun with TF3D, but then I would like to go back to old good PocketBreeze...
So I entered Settings - today and... I can't "un-tick" the TF3D option! :? I can move it up and down but simply can't disable it!
Does anyone know how to pass such limitation?
Of course I know that I can use SecondToday but I prefer to disable TF3D completely and release some memory.
U can try hard resetting it. I don't think it's normal not be able to disable it. If that doesn't work > Flash an other ROM? Make sure u have Hard SPL.
You simply need to clean your autostart folder.
Just leave "poutlook" in for proper Windows pushmail support.
After a Soft Reset you can switch off the TF Element in Settings. To use it again, simply tick it on again.
Hmmm... I think I found the problem. I've made a hard-reset of the device and it's gone!
I guess the problem must have been in some kind of the seller/operator changes made to the device - because when I first turned it on i did not have to go through the whole "tapping process" - and after manual hard reset I have to align the screen. set the date etc. Strange but true...
I installed Wisbar, didn't like it, removed it. Now the usual taskmanager icon is missing from the top bar... anyone knows how to fix it?
thx
Ok, it seems something is preventing the TaskmanagerService from autostarting even though MemMaid is showing it to be set on auto. I can start it manually but after soft reset it's stopped again.
curses!
Got it. Using MemMaid stop it, set it to auto, soft reset without starting it. On the next boot should be loaded automatically. What a strange software this wisbar.