I buy two retractable cable and they don't work with my diamond
They work with my HTC Pharos, I think it's a synchro's problem with windows mobile 6.1 because the Pharos is windows mobile 6
Somebody have a solution or idea???
Thanks a lots
uhm..
dodgy cable? use a other one ?
I test the two cable and the two don't work on my HTC diamond (on windows mobile 6.1)
My Pharos On the other hand work very good
I don't understand
no one have a idea?
Related
Hi all,
I've got a HTC TytnII and am using a fantastic little application called mToken to connect to all our servers via SSH etc..
I did notice there is also a "Direct COM Port" feature on this application aswell.
PWOOOAAAR, now that would be nice just to carry my phone into a Server room to connect to a Cisco Router via console.
However, I would need a miniusb to serial adapter.
I actually have a usb to serial adapter for my laptop because my laptop doesn't have a serial port for this type of work, can you get a miniusb to serial ?
Has anyone had any experience with this ?
Can it work ? Does it work ?
Thanks all
Regards,
geebz.
Solution
Hi,
The TyTN II cannot be used with USB Hardware that requires the Host Mode as serial ports.
One solution is to use BluePort XP. I'm using it myself successfully with PockeTTY (I don't know mToken, but I think that this should work too)
http://www.ipenabled.com/blueportxp.html
tomli said:
Hi,
The TyTN II cannot be used with USB Hardware that requires the Host Mode as serial ports.
One solution is to use BluePort XP. I'm using it myself successfully with PockeTTY (I don't know mToken, but I think that this should work too)
http://www.ipenabled.com/blueportxp.html
Click to expand...
Click to collapse
Those guys got to be kidding...
tomli said:
Hi,
The TyTN II cannot be used with USB Hardware that requires the Host Mode as serial ports.
One solution is to use BluePort XP. I'm using it myself successfully with PockeTTY (I don't know mToken, but I think that this should work too)
http://www.ipenabled.com/blueportxp.html
Click to expand...
Click to collapse
Thanks tomli
I have just bought a secondhand Shift and wanted to add xp to it. I've read all and I know how to do that.
anyway here is my question is it posible to synch and flash other htc models from the Shift? or will it only synch with the WM side of Shift?
I'm quite shure it will but just need to have it confirmed if yes or no
Yes it will, you can connect any ppc to the usb port, and sync or flash to your hearts content...
Thanks this will give be the option to cook anywhere then
My HTC TyTN II charging but not synchronizing with USB even its not detecting any Windows mobile device.
Hi
I have a HTC TyTN II, I was able to do the ActiveSync with my Laptop and Desktop
Now I am not able to do that, when I am connecting the USB cable my windows mobile is charging but the ActiveSync doesn't get active and no device detected at Laptop or desktop end.
checked cable is fine as I have a O2 Atom which is working perfect on the same cable and same OS
I had even done the Hard Reset to Factory Settings, but no luck still having the same problem.
I have Windows XP SP3 in Laptop
and Desktop with Vista Ultimate edition
Please provide me a solutions for this.
Thanks in advance
wisechap said:
My HTC TyTN II charging but not synchronizing with USB even its not detecting any Windows mobile device.
Hi
I have a HTC TyTN II, I was able to do the ActiveSync with my Laptop and Desktop
Now I am not able to do that, when I am connecting the USB cable my windows mobile is charging but the ActiveSync doesn't get active and no device detected at Laptop or desktop end.
checked cable is fine as I have a O2 Atom which is working perfect on the same cable and same OS
I had even done the Hard Reset to Factory Settings, but no luck still having the same problem.
I have Windows XP SP3 in Laptop
and Desktop with Vista Ultimate edition
Please provide me a solutions for this.
Thanks in advance
Click to expand...
Click to collapse
Which Rom are you using?
I am not sure about that - How to check that?
Settings>> System>> About
Window Mobile 6 Professional
Original that comes with HTC Tytn II, I haven't updated the ROM.
I have downloaded this one
RUU_Kaiser_DOPODASIA_WWE_3.29.707.0_radio_sign_25.83.40.02_1.65.16.25_Ship.exe
but not able update as I am not able to connect, even I try to do using Boot from USB - Pressing Power Button and Camera Button but no luck on that also.
Please see the attached images also, picture after connecting to the USB cable, you can see Mobile is charging and in ActiveSync (Which didn't auto started, I forcible on it) shows this msg.
Now I hope it would be a better pic of the problem.
If you're still under warranty -- SEND IT IN -- just tell them you can't synch the phone anymore.
If you're warranty is expired, take a magnifying glass and look at the connector on the phone. See if any of the pins look out of place, and if so use something suitable to carefully move the pins back into position. BE CAREFUL or you'll break a pin or the connector and you'll have to go to the next step.
The next step is to send your phone to a repair shop. HTC will repair it even if its out of warranty, and they'll charge a lot for it too. PPCtechs in the US will do it for a more reasonable price.
Seems the last option is to send to the service center, as the place I am in hasn't have any service center of HTC.
One more thing I am able listen full stereo songs using the headphone - which also connects through the usb port.
No option then have to give to the service center.
Not sure of the differences (if any) between HTC TyTN II and the Tilt from a settings perspective, but I did have the similar problem with my Tilt. Under Settings\Connections there is a "USB to PC" setting. I unchecked the "Enable advanced network functionality" box and the ActiveSync now works fine.
Hope that helps.
Yeah I did that ...(enable and disable of Advance USB)... tooo
I have a GPRS connection, by which I was able to share internet of PDA with Laptop.
Now when I am trying the same, its saying check USB cable., But through Bluetooth PAN its getting connected.
A proper search whould have confirmed waht one of the replies suggested. Check your USB connector, there are several pins in it and if on that is used for data transmission is bent/broken then it would cause what you describe.
This is a thread that never should have been, consider it closed. If you need more info find one of the existing threads about broken kaiser USB port/connector.
http://www.freewarepocketpc.net/ppc-download-zeno-usb-host-drivers.html
this is a link to the Zeno USB Host Drivers
these look very useful the ability to use many kinds of USB devices with the raphael, the only problem is it is descrobed to work with only up to WM 6.1
is there anyone here who can get these working on 6.5? it would be much appreciated
It would be very nice, but it looks like Diamond, Raphael and Blackstone lack the required hardware. AFAIK, nobody has managed to get it working on those devices with 6.1 or 6.5.
http://forum.xda-developers.com/showthread.php?t=411905
I thought it was driver issues.
it works on htc diamond?
I haven't decided yet but I'm looking into upgrading my trusty tytn in a bit. I am looking into getting the Samsung Omnia Pro B7610. This USB hosting business has really caught my attention. I'm just wondering if the B7610 supports USB hosting hardware wise.
Cheers!
HD2 / LEO not supported
I managed to build an custom USB Host cable with power injector
and installed Zenos USB Host Drivers v0.6 on my TMOBILE HD2 / LEO
but found no luck to get it working
Hi All,
HTC Kaiser,
Windows Mobile 6.5.
I'm looking for similar solution, mentioned in this theread - http://forum.xda-developers.com/showthread.php?t=1447467.
short briefing: I need to connect HTC Kaiser as external GPS device to openCPN (navi software) http://opencpn.org/ocpn/download,
How to do that, configure etc ? I need cable connection via usb (bluetooth is not considered because of many circumstances)
I didn't find any solution for such a problem, so this forum is my last chance.
I'll be grateful for help