Related
I dont know what to do... Yesterday i flashed my wizard to wm6 mb rom, everything worked great but today, couple hours ago i tried to upload some stuff by activesync, suddenly pda disconnected and hanged, so softreset and nothing - its stuck on bootscreen where there is info about my components:
ipl 2.26
spl 2.26
gms 02.61.11
os 3.3.0.0 (was something like 10.xxx... but i flashed faria 3.5aku and now is 3.3)
i also tried to format but msg FormatFailed appear :/
it is possible to run in bootloader and charger also charge my wizard
what to do ????
Do you have a copy of the Wizard Love rom? If so, install that in bootloader mode. Remember to plug your USB cable into the phone.
drivex said:
I dont know what to do... Yesterday i flashed my wizard to wm6 mb rom, everything worked great but today, couple hours ago i tried to upload some stuff by activesync, suddenly pda disconnected and hanged, so softreset and nothing - its stuck on bootscreen where there is info about my components:
ipl 2.26
spl 2.26
gms 02.61.11
os 3.3.0.0 (was something like 10.xxx... but i flashed faria 3.5aku and now is 3.3)
i also tried to format but msg FormatFailed appear :/
it is possible to run in bootloader and charger also charge my wizard
what to do ????
Click to expand...
Click to collapse
i am after updating and still wizard hangs up on boot screen. versions has changed and bootscreen logo too, what now ? ;((((
drivex said:
i am after updating and still wizard hangs up on boot screen. versions has changed and bootscreen logo too, what now ? ;((((
Click to expand...
Click to collapse
I would suggest flashing back to a carrier aku2.x rom and ensure that your phone will come up properly on it. If it does then good, it's most likely not a serious hardware issue, if not then you might be out of luck.
looks like a brick to me..
So sorry m8.
I hope you can revive it !
Had similar problem with the Super rom.What worked for me was taking a back up on the memory card and reflashing from the card.Read the Wiki about details on how to go about it.
Try to flash the latest t-mobile ROM found on their site if all the suggested doesnt work..
@ DRIVEX
Try Hard resetting via the harware Buttons Softreset hole method. Here is how:
----------------------------------
While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key.
Hope it helps.
.
I've done. I used method with mtty and i copied os to sd card, after that i reflashed using minisd card and it works. Thx for everyting, u guyz do great job here hehe
Me too !
cyberdrakula said:
@ DRIVEX
Try Hard resetting via the harware Buttons Softreset hole method. Here is how:
----------------------------------
While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key.
Hope it helps.
.
Click to expand...
Click to collapse
I've been trying many times, but when i did "While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key " but screen appeared FORMAT FAIL. Pls help me...
Pls help me !!!
cachep2004 said:
I've been trying many times, but when i did "While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key " but screen appeared FORMAT FAIL. Pls help me...
Pls help me !!!
Click to expand...
Click to collapse
this is dead your flashrom chip in pda. repair only change semiductors or all board.
Pls show me another ways !
UfOuN said:
this is dead your flashrom chip in pda. repair only change semiductors or all board.
Click to expand...
Click to collapse
I'm living vietnam, so i'm trying to find out another ways, but i think they have no equipments.
Bless god for me.............pls
Revive Wizard
you must use youre camera button on the startup if you got error 260.
You see a lot of collors on youre display and then you can flash youre phone again.
Thanks alot !
sleurhut said:
you must use youre camera button on the startup if you got error 260.
You see a lot of collors on youre display and then you can flash youre phone again.
Click to expand...
Click to collapse
Thanks alot my friend, I will do it !
"FORMAT FAIL" again again pls ... help me !
( I've been trying many times, but when i did "While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key " but screen appeared FORMAT FAIL. Pls help me...)
Pls ! Help me...."FORMAT FAIL" again again pls ... help me !
The hard reset doesnt work
I cant even get the screen to go on anymore. When I plug it in the light doesnt even go on to indicate that it is charging. SOmeone help me please.
ecomajor said:
I cant even get the screen to go on anymore. When I plug it in the light doesnt even go on to indicate that it is charging. SOmeone help me please.
Click to expand...
Click to collapse
Hard to help someone that hasn't told us anything.
From the sounds of it your battery has died. Until you get a good rom on there, the phone will NOT charge. You will need to find someone with a similar phone (or maybe go to your cell provider) and get them to charge the battery at this point. Once you have the battery charged then try following this step by step:
http://forum.xda-developers.com/showthread.php?t=298613
If that doesn't work, then come back and tell us more about what happened, what your IPL/SPL is, what type of phone you have, if its G3 or G4, etc... People here will help, but not without information.
mfrazzz said:
Hard to help someone that hasn't told us anything.
From the sounds of it your battery has died. Until you get a good rom on there, the phone will NOT charge. You will need to find someone with a similar phone (or maybe go to your cell provider) and get them to charge the battery at this point. Once you have the battery charged then try following this step by step:
http://forum.xda-developers.com/showthread.php?t=298613
If that doesn't work, then come back and tell us more about what happened, what your IPL/SPL is, what type of phone you have, if its G3 or G4, etc... People here will help, but not without information.
Click to expand...
Click to collapse
I have G3. i think its 2.25. I was trying to flash my rom when this all happened.
is there any way to charge it without a good rom?
ecomajor said:
I have G3. i think its 2.25. I was trying to flash my rom when this all happened.
is there any way to charge it without a good rom?
Click to expand...
Click to collapse
Not that I know of. Thats one of the reasons its recommended you start with a battery that has over 50% charge (personally I never flash with less than 100% in case something goes wrong). Not saying you didn't do that, but you appear to now be trying to work with a dead (or almost dead) battery, and that will only make things worse if you try to flash and then the battery dies in the middle (maybe not worse, but it sure won't help).
Like I said, you'll need to find someone with a similar phone or see if your local cell provider office will let you charge it (or swap it for a charged battery).
I got my ppc back up and I tried reflashing again and I have almost the same issue. It says format is successfull but then it gets stuck at the blue screen.
Obviously did something wrong in the ROM upgrade. I was trying to install Hard SPL, and it said it wasn't compatible with my phone's SW version - and now it won't switch on, which I find odd. Any ideas?
Have you tried to flash an original ROM already?
EDIT: That won't do if you can't switch your Diamond on.....
I have the Same problem .
Do you try Volume down + reset to go to bootloader ?
That's the problem when you don't have an SD card port. If the hard reset doesn't help, I guess that the solution would be to use something like mtty.
solution
Hi everybody! never give up, you can always repair it: try to find your original rom, connect your diamond to your computer, put it in bootloader and lunch rom update utility. Normaly it will work, i repared my last elfin doing that.
tell me if it work!
regards
it won't turn on at all
soop said:
it won't turn on at all
Click to expand...
Click to collapse
Ive not had this problem after a rom upgrade because I havent done one but I did have a problem where something boofed and it wouldnt turn on and I had to remove the battery and sim card and re-insert for it to turn on...maybe worth a try...
Bootloader
soop said:
it won't turn on at all
Click to expand...
Click to collapse
Neither the bootloader works?
take the battery out for 30 sec, put it back, press volume down + power button and press with you stylus reset. If it goes in Boot loader Connect it to your USB and load the new rom!
Hope that helps!
neilsupermac999 said:
Ive not had this problem after a rom upgrade because I havent done one but I did have a problem where something boofed and it wouldnt turn on and I had to remove the battery and sim card and re-insert for it to turn on...maybe worth a try...
Click to expand...
Click to collapse
yup!i try tat on a elf before,it works but not sure about TD
I tried new radio 1.08.25.20 after few days I decide go back to 1.0.25.05. After flashing program written "different device id". Now is my diamond dead cant even get bootloader. I used hard spl before flashing. I flashed my phone so many times and nothing happend, but now is my phone absolutely dead. just black screen, I tried power button, volume down and reset but doesnt work. Can anyone help my?
_smejo said:
I tried new radio 1.08.25.20 after few days I decide go back to 1.0.25.05. After flashing program written "different device id". Now is my diamond dead cant even get bootloader. I used hard spl before flashing. I flashed my phone so many times and nothing happend, but now is my phone absolutely dead. just black screen, I tried power button, volume down and reset but doesnt work. Can anyone help my?
Click to expand...
Click to collapse
What do u mean "different device id" ?
So there is no power to the device? (take out the battery & place it back in).
band27 said:
What do u mean "different device id" ?
So there is no power to the device? (take out the battery & place it back in).
Click to expand...
Click to collapse
I have no idea what it is mean, but i already tried take out battery....
try
take out the battery and wait about 5-10min then put it back again
Aqrab said:
try
take out the battery and wait about 5-10min then put it back again
Click to expand...
Click to collapse
I already did it
Try - Volume Down and Power Button.
Highlife22 said:
Try - Volume Down and Power Button.
Click to expand...
Click to collapse
doesnt work as well
Are you sure that the battery have power ?
Sometimes flashing a radio can brick your phone, not much you can do I don't think.
--- mistaken
1: I cannot flash my X1 using any methods! see this link
2: When the X1 is on and i'm trying to turn the screen on, i'm pressing the power button but the Dialpad and Calendar will automaticly comes up it's just like i'm pressing dial and left silver button together with power button
3. I think that's why my vol down+power button is not working as well as silver buttons when trying to hard reset!
Please help me, it's not even a long time that i'm using it!
(sorry for my bad english)
Have you tried flashing by USB method instead of Via Memory Card?
sorry, dont funny to read the thread, so this question could be known by you.
did you turned off your phone by long pressing the off button?
the second way is a little bit tricky:
push reset .. than (no longer than 0,5 seconds) off + vol_down until vibration comes and tree-color-screen.
it works too after taking battery out and than back. but more time for pushing off +vol_down.
okokur said:
sorry, dont funny to read the thread, so this question could be known by you.
did you turned off your phone by long pressing the off button?
the second way is a little bit tricky:
push reset .. than (no longer than 0,5 seconds) off + vol_down until vibration comes and tree-color-screen.
it works too after taking battery out and than back. but more time for pushing off +vol_down.
Click to expand...
Click to collapse
dude? whats up man? dint u go to school?
'dint' you?
Strange this is the second person claiming about the same stuff... anyway... take out memory and try hard reset.
I did everything!!! Nothing helped!
I'm going to flash it back to stock ROM. i donno if i can
i had the same problem...[after a LITTLE cola damage ]
i contacted the sony ericsson support and they repaired me my x1 [switched a key] even their was set a custom rom...
"if the problem is caused by the custom rom you have to pay 25€ for setting an original rom otherwise we will repair it on guarantee"
so the best thing is to tell the hotline what you´ve already tried and send it to x1 support center...
the german firma "becker&partner" was realy fast...after 3-4 days i´ve got my x1 back
doesn´t know where you are living/how fast the x1 support is in other countries
ANy updates about the problem? Have u been able to re-flash your stock rom back?
jhendra said:
ANy updates about the problem? Have u been able to re-flash your stock rom back?
Click to expand...
Click to collapse
No
I cannot even back to my original rom/spl to get it for warranty
What should I do?
isp_85 said:
No
I cannot even back to my original rom/spl to get it for warranty
What should I do?
Click to expand...
Click to collapse
did u try hard reset without sd in?
wazaaappp said:
did u try hard reset without sd in?
Click to expand...
Click to collapse
yes! i did
isp_85 said:
yes! i did
Click to expand...
Click to collapse
Now I have the same problem with my second xperia (even newer) I've done everything possible I guess... :S I'll try to record a video to show everybody what is this all about, and if anyone knows the solution... so now we are two
wazaaappp said:
Now I have the same problem with my second xperia (even newer) I've done everything possible I guess... :S I'll try to record a video to show everybody what is this all about, and if anyone knows the solution... so now we are two
Click to expand...
Click to collapse
Yes!!!
Help!!!!!!!!!!!!!!!!!!!!
Hi Wraaaaap and ISP! Today i had the problem num 262 when trying reflash stock bios, and I found the way that don't need to press power + vol down buttons. maybe it might works for U guy. But firstly, your phone have to normally start up, and can access to windowns screen. And then, go to this page http://forum.xda-developers.com/showthread.php?t=431218 follow instruction in order to flash bios again. If Ur phone have 0.72.OliNex (or 0.52.OliNex MFG) U should flash it back to stock bios? Before reflashing bios, take off SD card, copy stock ROM to SD card and remane it to Kovsimg.nbh, put back to the phone...Start flash. and vice-versa if ur phone's bios is tock one. Hope it will help U
kanchigo said:
Hi Wraaaaap and ISP! Today i had the problem num 262 when trying reflash stock bios, and I found the way that don't need to press power + vol down buttons. maybe it might works for U guy. But firstly, your phone have to normally start up, and can access to windowns screen. And then, go to this page http://forum.xda-developers.com/showthread.php?t=431218 follow instruction in order to flash bios again. If Ur phone have 0.72.OliNex (or 0.52.OliNex MFG) U should flash it back to stock bios? Before reflashing bios, take off SD card, copy stock ROM to SD card and remane it to Kovsimg.nbh, put back to the phone...Start flash. and vice-versa if ur phone's bios is tock one. Hope it will help U
Click to expand...
Click to collapse
can't do it. can't flash anything
wazaaappp said:
can't do it. can't flash anything
Click to expand...
Click to collapse
can ur phone start normally? I mean, winmo in ur phone still ok?
kanchigo said:
can ur phone start normally? I mean, winmo in ur phone still ok?
Click to expand...
Click to collapse
nope mate, I just turn it on and starts the bootloader... I'm uploading a video to judge by urselves, I'm doing everything possible but can't get it !
wazaaappp said:
nope mate, I just turn it on and starts the bootloader... I'm uploading a video to judge by urselves, I'm doing everything possible but can't get it !
Click to expand...
Click to collapse
if ur phone stops at silver screen, shows "loading..." so u take off SD card and copy ROm in there (if stock bios so copy stock ROM or 0.72 so copy any cooked Rom) rename ROM to Kovsimg, put the card back to the phone, take off battery and start again. It might work.
don't need to press anything, just power button one time.
kanchigo said:
if ur phone stops at silver screen, shows "loading..." so u take off SD card and copy ROm in there (if stock bios so copy stock ROM or 0.72 so copy any cooked Rom) rename ROM to Kovsimg, put the card back to the phone, take off battery and start again. It might work.
don't need to press anything, just power button one time.
Click to expand...
Click to collapse
hoho thanks m9 for ur help but as I said, I've done everything which is in my mind, that was the first thing I did ... no success though
Right. I bought this phone (second hand, flashed with shifu 4.2 ROM {I have no clue what this means}) and it worked perfectly. It didn't come with a sim, so I went out and bought two. An O2 and an Orange one. The O2 one had problem's activating, so I placed in the Orange one. The phone somehow screwed up, saying iLockV2.exe is corrupt/could not be found. So, I contacted the seller, he told me to do a hard reset, which I done. The phone worked fine from there.
This afternoon, the phone froze, so I took out the battery and put it back in. The same problem occurred with the iLockV2.exe thing above; so I tried to do another hard reset, it didn't work. After that, I was stuck at the HTC screen where it says:
Code:
R 1.71.09.01
G 25.75.40.02.
D 3.34.shifu
.
I then took out the battery again, and the same thing happened. So I took out the battery once more, and when I pushed the power button it wouldn't turn on. So, I took the battery out and left it for about 4 hours, and put it back in, but now, I'm still stuck at the HTC boot screen (same code as above).
What do I do to make my phone work again?
koglaa said:
Right. I bought this phone (second hand, flashed with shifu 4.2 ROM {I have no clue what this means}) and it worked perfectly. It didn't come with a sim, so I went out and bought two. An O2 and an Orange one. The O2 one had problem's activating, so I placed in the Orange one. The phone somehow screwed up, saying iLockV2.exe is corrupt/could not be found. So, I contacted the seller, he told me to do a hard reset, which I done. The phone worked fine from there.
This afternoon, the phone froze, so I took out the battery and put it back in. The same problem occurred with the iLockV2.exe thing above; so I tried to do another hard reset, it didn't work. After that, I was stuck at the HTC screen where it says:
Code:
R 1.71.09.01
G 25.75.40.02.
D 3.34.shifu
.
I then took out the battery again, and the same thing happened. So I took out the battery once more, and when I pushed the power button it wouldn't turn on. So, I took the battery out and left it for about 4 hours, and put it back in, but now, I'm still stuck at the HTC boot screen (same code as above).
What do I do to make my phone work again?
Click to expand...
Click to collapse
First of all, stop taking out the battery when the phone is on because that really screws up the files. You are doing more harm than good there.
Try a series of soft resets to try and fix it. If that doesn't work, try a series of hard resets to solve the problem.
If no luck there, go into bootloader ( tri color screen ), hold in power and camera button at same time while doing a soft reset. The try flashing a stock Orange rom ( found in the wiki ) Then re-flash with shifu rom.
Not letting me hard reset, so I'm just going to reflash (Y). I hope I do this right :\
EDIT:
My computer can't read my phone when connected via usb D:
koglaa said:
Not letting me hard reset, so I'm just going to reflash (Y). I hope I do this right :\
EDIT:
My computer can't read my phone when connected via usb D:
Click to expand...
Click to collapse
What does the phone do when you try to hard reset ?
When you put your phone into bootloader what does the screen say . When in bootloader, does the bottom of the screen change from serial to usb when you plug it in to your pc ?
denco7 said:
What does the phone do when you try to hard reset ?
When you put your phone into bootloader what does the screen say . When in bootloader, does the bottom of the screen change from serial to usb when you plug it in to your pc ?
Click to expand...
Click to collapse
The phone just soft reset's when I try to hard reset.
And yes, it does change from serial to usb when I plug it into my computer
Seem's like I was doing the hard reset wrong. Same thing is still happeneing, not getting past the part where it says:
Code:
R 1.71.09.01
G 25.75.40.02.
D 3.34.shifu
EDIT:
After 20 or so hard resets, I've moved onto the boot-loader, then it took about 5 minute's to load to the main OS. I think everything is sorted out now. Thanks
omg, this is getting really annoying now. The phone keeps on crashing at random interval's and can only be recovered by hard resetting :\
Well if it keeps happening try a different ROM just make sure you follow F.A.Q for ROM your flashing.
The thing that it's saying is corrupted is S2U2 and to me sounds like it just can't find the .lnk in Windows StartUp.
Flash OEM Rom before the new one and if you have 2GB or smaller SD Card flash using the SD Card method.
stylez said:
Well if it keeps happening try a different ROM just make sure you follow F.A.Q for ROM your flashing.
The thing that it's saying is corrupted is S2U2 and to me sounds like it just can't find the .lnk in Windows StartUp.
Click to expand...
Click to collapse
It happen's when the phone freeze's and I soft reset it :\
koglaa said:
It happen's when the phone freeze's and I soft reset it :\
Click to expand...
Click to collapse
I'd go with what Philux-X says "to which is why i said F.A.Q" try and flash a stock ROM prior to flashing custom so as to clear nand.
The corruption due to stalling sounds pretty normal as the phone does not get to shut down via the usual method.
stylez said:
I'd go with what Philux-X says "to which is why i said F.A.Q" try and flash a stock ROM prior to flashing custom so as to clear nand.
The corruption due to stalling sounds pretty normal as the phone does not get to shut down via the usual method.
Click to expand...
Click to collapse
I'll do that next time it crashes .
Thanks for all your help guys