I just copied my other post to make it easier to find over here. Hopefully you will all find it useful and enjoy the information.
For those who might not understand how to do it, just wanted to post this guide here too.
What you need:
1) HH_0409_WeatherCities.xml file. I have attached one below which you can use, or alternatively you can copy the one from the your /windows folder.
2) If you don't have the version which is already patched then you will need the N2A patched file attached below as well.
Here are the steps:
1) Open HH_0409_WeatherCities.xml using Notepad.
2) You will see many cities listed like this:
<city name="Anchorage, US" loca="NAM|US|AK|ANCHORAGE " land="United States " /> (original)
<city name="Ketchikan, AK" loca="NAM|US|AK|KETCHIKAN" land="United States" /> (copied and edited)
Simply copy one of the cities from your country, or state and then edit the city information. You will notice in the example above i have changed "Anchorage, US" to "Ketchikan, AK" as this is just what will display on the screen. The section marked loca=con"CONTINENT|COUNTRY|STATE|CITY" must be typed in correctly or else you will not get any data.
3) Repeate step 2 for as many cities as you would like to add.
4) Disable touchflo on the today screen
5) Copy Manila2D.exe (if you are not using the version already patched), and your newly edited HH_0409_WeatherCities.xml file to the /windows folder.
6) Enable touchflo on the today screen again.
7) Go to weather and add new city, the new cities should be available to you. I would remove any old cities you had before as well.
Weather won't download via edge or 3g:
For those of you still having problems with the weather plug-in here is another thing I did to fix it:
1. Go to Settings - Connections - Connections - Advanced - Select Networks - Edit (MEdia Net) - Proxy Settings -> UNCHECK BOTH OPTIONS
2. Soft Reset
It should work fine
UPDATES
banzaiwolfe said:
As a side note, I was able to just use the Zip code instead of NAM|US|AK|KETCHIKAN.
Click to expand...
Click to collapse
polyrhythmic said:
Scotchua, nice tutorial. I've been using several of your fixes since I discovered them. However, the one note missing from your Manila2D Weather Custom Cities tutoria is how to determine the loca="NAM|US|AK|KETCHIKAN".
I have the solution! For most US locations, you can use the 5-digit ZIP code, but to determine ANY location, including outside the US, use this link to AccuWeather's RSS.
Simply put in your location as instructed in the 'Choose a location' field and click 'Set'. (For this example, I used Whistler, Canada.) The page then generates a URL for you, which looks like accuweather.com/rss/liveweather_rss.asp?metric=0&locCode=NAM|CA|BC|WHISTLER. The piece after locCode= (which I've hilited in Red) is what goes in the loca="" field in the XML file.
Then complete your tutorial, and choose the custom cities! Hope this helps someone else looking to make a quick fix.
Click to expand...
Click to collapse
Here's An Entirely New Method. I tried and it works on PDA V9 (Only one i tried it on).
macrossmerrell said:
Hi all,
Here is what I did to fix my the darn weather problem using my AT&T Tilt through MediaNet.
1. Make a copy of the HH_0409_WeatherCities.xml in the Windows folder.
2. Modify the file to include your info. (for me the zip code worked). See the examples below:
Code:
<city name="Idaho Falls, ID" loca="83406" land="United States"/>
<city name="Idaho Falls, ID, US" loca="NAM|US|ID|IDAHO-FALLS" land="United States"/>
3. Copy the HH_0409_WeatherCities.xml back to your device (your storage card or My Documents)
4. Disable TouchFlo in your Today Screen settings
5. Using TotalCommander overwrite the HH_0409_WeatherCities.xml file in the Windows folder
6. Go to Settings, Connections tab, Connections program and select the "Manage existing connections" option.
7. Click the Proxy Settings tab and uncheck the "This network uses a proxy server to connect to the Internet" option.
8. Click the OK at the top left.
9. Once again, select the "Manage existing connections" option.
10. Click the "Edit..." button for your MediaNet or ISP connection
11. Click Next, Next
12. Click the "Advanced..." button
13. Click the Servers tab at the bottom
14. Click "Use specific server address" and enter the two following addresses for DNS and Alt DNS:
208.067.222.222
208.067.220.220
15. Click OK at the top, then Finish at the bottom, click OK again at the top, then OK again.
16. Reenable TouchFlo in your Today options
17. Go to the Weather Tab and Add your city
18. Enjoy
I have tested the solution on are Garmin's ROMs, but it should solve proxy server issues and DNS issues relating to AT&T's seriously out of date default DNS servers (the proxy server uses an up to date DNS server).
The above DNS servers are from OpenDNS www.opendns.com
Please post and/or PM me if this solution works for you. I've been frustrated at the lack of working weather for my area, so this is the crazy solution I came up with!
Merrell
Click to expand...
Click to collapse
Any Suggestions
Hi, I've done everything. However when I try to copy the new file I created with the HH_0409 exe there's problems.
1) when i go into windows on my device and go the the HH_file it will not let me copy it or deleate it, so i could then put in the new file.
2) when I try to copy and paste my new file titled the same HH_0409_WeatherCities to the Windows in device I get a error message that reads (error copy file, cannot copy HH_4090_WeatherCities access is denied. Be certain that there is enough free storage memory that the destination is not write-protected and that the file is not currently in use.)
I have unchecked TouchFlo as stated and done everything as listed. I'd somehow had this working when using MD2 but now that I'm using the Solace 1.5 rom, I'll be darn that I can get this to work. I'm trying to put Millsboro, DE USA into the darn thing. If you have any suggestions I'd be greatly appreciative.
Thank you in advance.
Beachboyde/Jon
beachboyde said:
Hi, I've done everything. However when I try to copy the new file I created with the HH_0409 exe there's problems.
1) when i go into windows on my device and go the the HH_file it will not let me copy it or deleate it, so i could then put in the new file.
2) when I try to copy and paste my new file titled the same HH_0409_WeatherCities to the Windows in device I get a error message that reads (error copy file, cannot copy HH_4090_WeatherCities access is denied. Be certain that there is enough free storage memory that the destination is not write-protected and that the file is not currently in use.)
I have unchecked TouchFlo as stated and done everything as listed. I'd somehow had this working when using MD2 but now that I'm using the Solace 1.5 rom, I'll be darn that I can get this to work. I'm trying to put Millsboro, DE USA into the darn thing. If you have any suggestions I'd be greatly appreciative.
Thank you in advance.
Beachboyde/Jon
Click to expand...
Click to collapse
I use total commander (which i have added as an attachement to the first post) to copy the files. If you have tf2d, and done a soft reset, but still cannot copy the files using total commander then i really don't know why your files cannot be overwritten. I've honestly never had that problem before, so i just don't have anyway to help you.
I also got that same error when I was using file explorer but I did get it to work when I used Total Commander.
I downloaded the file to my desktop.
Then opened it with notepad.
Added my city
I then choose to save as and selected the file on my desktop to be overwritten.
I copied it to my storage card.
I then copied it using total commander to the windows directory with TF2d disabled.
soft reset
enabled TF2d and it was there.
Can you give example of with zip code. I tried it using the info off the rss feed hyperlink and still nothing. Thanks.
turcomora said:
Can you give example of with zip code. I tried it using the info off the rss feed hyperlink and still nothing. Thanks.
Click to expand...
Click to collapse
First Post Updated
NOt working for me
Scotchua, thanks for taking the time to put this together. I have edited my HH_0409... file and put the cities in. Now I am able to select the custom cities as new locations but I get the "unable to download..." message for those cities whil the original cities will download weather just fine.
Any ideas?
thanks.
good stuff
iamdamon said:
Scotchua, thanks for taking the time to put this together. I have edited my HH_0409... file and put the cities in. Now I am able to select the custom cities as new locations but I get the "unable to download..." message for those cities whil the original cities will download weather just fine.
Any ideas?
thanks.
Click to expand...
Click to collapse
you need to either copy the patched manila2d.exe file over to /windows or change the DNS server addresses. I tried both methods and they work. They're both in the instructions.
Thanks!
scotchua said:
you need to either copy the patched manila2d.exe file over to /windows or change the DNS server addresses. I tried both methods and they work. They're both in the instructions.
Click to expand...
Click to collapse
Hey I appreciate the help...I am up and running now. I had saved the Manila2D.exe file to my storage card--I thought I just had to run it like a .cab but obviously (I overlooked it before) you have to save it to /windows. (I didn't have to mess with the DNS settings and I was able to simply enter using the zip code method.)
Guys like you are an asset to the forum...
scotchua said:
I use total commander (which i have added as an attachement to the first post) to copy the files. If you have tf2d, and done a soft reset, but still cannot copy the files using total commander then i really don't know why your files cannot be overwritten. I've honestly never had that problem before, so i just don't have anyway to help you.
Click to expand...
Click to collapse
can you do a step by step using total comander, I stil get a message that the files can not be replaced
I have the same problem. I am using a touch cruise with chavon bravo's rom. Cant move the manila file to windows.
NOTE: OPEN THE XML WITH NOTEPAD, NOT WORDPAD.
Word pad will translate foreign characters and will corrupt the XML file.
I did the step by step instructions, copied both files to the windows folder, and then restarted touchflo. Wheni go to Select location, its completely blank. Any ideas on this one?
still nothing
i'm using hyperdragon IV IOLITE, with touchflo but same trouble, when i've update the XML the new location appears, but when i sync nothing comes, but if i overwrite the patched Manila2d.exe now doesn't come up the manilla.
i don't need the Connection setting, cuz i'm a Mexican user, i've my own settings.
any idea, anybody know if the Hyperdragon IV IOLITE has already the manilla patched version?
this is the change in the XML NAM|MX|MX019|MONTERREY, the original MONTERREY has MX005 and comes with other weather forecast not from my city
i've tried two ways, overtwritin' the original Monterrey item, and adding another as MonterreyNL, and as i told you, in both ways the new setting pops now but can't get weather and in the other locations JUST FINE!!
Custom M2D Weather
hi guys, maybe I have the definitive solution to setting new cities on M2D weather. (or at least on my Kaiser go on)
1) in M2D weather set one city whatever you want is indifferent.
2) disable touchflo in today setup
3) open REGISTRY EDITOR and go on HKEY_LOCAL_MACHINE
then open software, then open HTC, then open Manila2D, then open Weather here you have two choice "0" and "setting" in both of them there are two item: "Location" and "Location Code". (you have to modify the item in "0" and in "setting")
So, when you tap in Location, you have to insert a string like this:
Caprese Michelangelo, It (first city name and after the nation)
When you tap in location code, you have to insert a string like this:
eur|it|it016|Caprese Michelangelo
If you want repeat for other city. At the end enable touchflo on the today screen again and upgrade the weather.
Work fine for me on my Tytn II.
original manila
where can i get the original manila2d? cuz i dont like the patched one
pincopinco,
You the man!! Just tried it on my TyTNII and worked first time! Outstanding!
pincopinco said:
hi guys, maybe I have the definitive solution to setting new cities on M2D weather. (or at least on my Kaiser go on)
1) in M2D weather set one city whatever you want is indifferent.
2) disable touchflo in today setup
3) open REGISTRY EDITOR and go on HKEY_LOCAL_MACHINE
then open software, then open HTC, then open Manila2D, then open Weather here you have two choice "0" and "setting" in both of them there are two item: "Location" and "Location Code". (you have to modify the item in "0" and in "setting")
So, when you tap in Location, you have to insert a string like this:
Caprese Michelangelo, It (first city name and after the nation)
When you tap in location code, you have to insert a string like this:
eur|it|it016|Caprese Michelangelo
If you want repeat for other city. At the end enable touchflo on the today screen again and upgrade the weather.
Work fine for me on my Tytn II.
Click to expand...
Click to collapse
I seem to have deleted a DWORD in HKLM/SOFTWARE/HTC/MANILA 2D/WEATHER/SETTINGS because the keyboard was in the way and I rewrote a DWORD by mistake. Could anyone please list all DWORDS under HKLM/SOFTWARE/HTC/MANILA 2D/WEATHER/SETTINGS?
FINALLY a simple fix-Thanks!
pincopinco said:
hi guys, maybe I have the definitive solution to setting new cities on M2D weather. (or at least on my Kaiser go on)
1) in M2D weather set one city whatever you want is indifferent.
2) disable touchflo in today setup
3) open REGISTRY EDITOR and go on HKEY_LOCAL_MACHINE
then open software, then open HTC, then open Manila2D, then open Weather here you have two choice "0" and "setting" in both of them there are two item: "Location" and "Location Code". (you have to modify the item in "0" and in "setting")
So, when you tap in Location, you have to insert a string like this:
Caprese Michelangelo, It (first city name and after the nation)
When you tap in location code, you have to insert a string like this:
eur|it|it016|Caprese Michelangelo
Click to expand...
Click to collapse
Man, thank you, thank you, thank you! This is the first fix that worked easily without messing up something else. City data now updating like a charm on my Vogue. Thanks again for sharing.
Related
The weather plugin is not updating on my tilt. I keep getting "Unable to retrieve data for selected city." Has anyone figured out how to fix this problem?
I've seen that too -- it's failed when connected to two different WiFi networks, so I think the problem is on the server end (accuweather.com, IIRC).
Good to know!
Same here, this morning I couldn't connect. Yesterday it was working fine, but last night I loaded in a new 'power status' application... Good to know it's not something I did!
Same here on my AT&T Tilt since Sunday night.
Mine just started this morning. Accuweather's site is working fine but since I'm not the only one it must not be my phone or connection.
I'm in the process of reading through and trying this fix:
http://forum.xda-developers.com/showthread.php?t=319187
The HTC home apps floating around have been modified so that they use a custom city database that spawns your requested city's forecast. This is done via a weather server that's owned not by HTC or accuweather, but by a private person (he's a member on thee forums, N2A).
N2A recently made changes to the way the data is pulled from his server. No longer can it use the modified IP-based hosts entries (which is what it was doing before).
The best way to get weather working again is to install N2A's patched home plugin then add the city to the XML per his instructions.
I used the patched Schen 2.1 HTC Home plugin and it works awesome again.
http://forum.xda-developers.com/showthread.php?t=319187
Why are we using his server instead of downloading from accuweather?
decimusmaximus7 said:
Why are we using his server instead of downloading from accuweather?
Click to expand...
Click to collapse
This plugin was made by HTC but never really intended to go to US market. The setup between accuweather and HTC only allowed for certain cities, and only a limited number of US cities are in the orignal database. The accuweather data just isn't there for all cities, I've tried following the syntex in the weather XML file and tried adding my home town. It just wouldn't work. So N2A modified the code int he plugin to point to his server. HTC Home Customizer does the same thing, when using the custom db, it redirects the request to N2A's server first.
N2A has made some changes and the old method is no longer working. You have to download one of his recently patched home plugins and enter the city zip code into XML file as instructed.
Ok I deselected my HTC Home in the Today settings and then downloaded "For other devices: UPX compressed" from http://forum.xda-developers.com/showthread.php?t=319187.
This is Schen's 2.1 with N2A weatherpatch. After this install I am able to add my custom city with HTC Home Customizer 1.0b without having to edit the XML files.
Just thought I'd share my success.
I had this same problem but that was from installing HTC Home Customizer. After I uninstalled HHC it still did the same thing. I had to hard reset and start from fresf again to get my weather working again. Does anyone using HHC have that same problem or did I do something wrong?
Could the program point to another server???
Could the software point to another server? ie:www.weather.com
www.nws.noaa.gov
www.accuweather.com
weather.yahoo.com
Hello, with the same problem since installing HHC.
ok people, this is an easy fix.
Uninstall prior versions, install the 2.1 version, find the weather XML file in \htchome directory, save the file to your PC, modify the file with the proper cities you want, goto the weather tab, click on the city and pull the new city you just added to the XML file. DONE!
It can be done in 5 minutes or less. This si not the fault of N2A nor the author of HHC. There's just been a change of the way the data is acquired, this was done to help users of certain networks to be able to use HTC Home.
Thank you smittyofdhs,
but "install the 2.1 version", of HHC ? or htc home plugin?
yeantbron said:
Thank you smittyofdhs,
but "install the 2.1 version", of HHC ? or htc home plugin?
Click to expand...
Click to collapse
No problem....
2.1 of plugin
HHC is only at ver 1.0b5
-Smitty
Newb trying to help!
Ok, here's the weather fix that worked for me. I am Currently using Dutty's TouchFlo Hybrid No.2 Final and HHCv.10b5 on my Tilt.
The following info was derived from N2A's post HERE. I just wanted to provide the instance specific fix for as it seems this might be a popular configuration. Hope its a good first post! Again this is what worked for me!
Pre-fix measures: In the HHC program be sure the weather database is set at Default.
Fix:
1) Install sdkcerts.cab to your device. Soft reset. (not sure if you have to reset but thats how i did it)
2)Install KaiserHTCHomeDLL.CAB. (Thanks N2A) This users post can be viewed HERE, This is the user that runs the weather server and has created the fixes. I belive! Much Credit to them.
3)Browse to My Device\WINDOWS\HH_0409_WeatherCities.xml. Activesync and Copy this file to Your Desktop Pc. If your having trouble seeing your Windows Directory from your PC start file explorer from your device and browse to the HH_0409_WeatherCities.xml file. Copy the file to My documents on the device then copy the file file to the PC.
4)On the PC, right click the HH_0409_WeatherCities.xml file. Select "Open With" then "Notepad".
5) In Notepad each location will appear as so. <city name="Atlanta, US" loca="NAM|US|GA|ATLANTA " land="United States "/>
6)Copy one of these lines and paste it directly under the original.
7)Edit the new line to reflect Your City like so. <city name="Your City, US" loca="xxxxx" land="United States "/> (xxxxx represents the Zip Code of the city your adding)
You can add more than one city if you choose.
8) Save your changes.
9) Replace the current .xml file in my documents with the one you just edited.
10) From your device, Open Total Commander then open the My Documents folder, browse to the HH_0409_WeatherCities.xml and select the "Copy/Move" option. Press the "Tree" button, highlight the Windows folder, press OK then press the "Move" button followed by the "Overwrite" button. Close Total Commander.
11)Select your city by going to the weather tab, and clicking on the area below "Weather". Choose your local town/city from the list.
12) Soft Reset.
Notes: The "US" inside the city name section of the .xml file can be changed to represent your state two letter postal code.
If your not using this configuration or just want more info you can visit N2A's post HERE.
Much thanks to all the pros that make this possible!
decimusmaximus7 said:
Ok I deselected my HTC Home in the Today settings and then downloaded "For other devices: UPX compressed" from http://forum.xda-developers.com/showthread.php?t=319187.
This is Schen's 2.1 with N2A weatherpatch. After this install I am able to add my custom city with HTC Home Customizer 1.0b without having to edit the XML files.
Just thought I'd share my success.
Click to expand...
Click to collapse
thanks for your post. i followed your instructions and it works just like it used to before the problem.
Anyone having problems with SPB Weather not updating either? It never gets to the forecast. Worked fine before I installed the cut-down no-bloat Tilt ROM from 11/30.
This works http://forum.xda-developers.com/showthread.php?t=319187
Ok, go ahead and bash me, I have been trying for two weeks and still do not get it. I have read post over and over and simply do not understand the "computer lingo". I have a ATT Tilt 8925. I have installed the HTC Home screen with the customize application. I live in Thibodaux Louisiana and the only city I can get is New Orleans which is 60 miles away. My Tilt has a factory ROM and the only things i installed were:
HTC Home plugin
HTC home customize
fff Finger friendly finder
large start-up menu
opera mobile 8.65
I do understand that with a new patch I should be able to receive any city. The problem is I DO NOT understand or can not figure out what patch I need. I have read a lot of post, I do not know which one I need because of the "lingo" used. I am a police officers not a tech. Can somebody please assist me in getting my local weather by laying it down in layman's term!!! This would make my tilt complete. I know a lot of guys would be happy.
ok, go ahead and make fun of me, then after please help. If you are willing I would even be glad to give a call to someone.
Thanks again !!!
Ok, here is how I got mine to work. First install HTC home customizer. Then soft reset. Then in HTC home customizer, edit the city and save it to cutom.
Then copy the .dll file to your windows folder on your phone. Soft reset and everything should work.
BTW, unzip the dll file first before you paste it to the windows directory.
Ok, I installed the HTC Custom and it workng fine. I know how to enter the city of choice but I do not understand whats a .dll file, were its located and were to install it.
Are you talking about the windows folder under My Device? And once you show me were this .dll file is, any special place in the windows folder it needs to got. I guess I can cut and paste it there correct.
Thanks for the help, just need a little more info.
What a .dll file and were its located?
What I just did was download the attached file you had and unzipped it on my PC then transported it to my tilt. I cut and paste it under My Device>windows and and paste it at the bottom. Soft reset and still unable to gather data. When selecting a new city. I selected custom and enter my city (Thibodaux)> then my zip code "70301" then country USA. After each selection I tapped "X" to save and at the end I tapped exit.
Any thoughts
Nope thats it. Just soft reset & then go to the weather tap & it should sync.
When I enter my zip code do I enter anything else other than the numbers?
I noticed at the bottom of the tab it had some format/letter etc, all I enter was my zip code numbers?
Also should I be seeing other cities when I am on the home page when I tap the city icon. It only shows my city (Thibodaux).
I do notice when it is searching, the internet is running. Also from the factory it searches using MediaNet I beleive. Also, I am not using a proxy. All my internet setting are from the factory.
Is it possible I have the wrong HTC Cutomizer downloaed. I downloaded the
"v0.8" version the other one was the v1.0????
Tried again and after searching, unable to gather data ETC.
Again, thanks and help!!
I am going to try and install the HTC Customizer on the phone instead of the storage/memory card and see if that will amke a difference. The HTC home and cusotmizer work good being on the storage card. Anyway stand by and will try.
No different, same message; "unable to gather data from selected city"
Okay, Do this. DL the attached file. Unzip & Put both files in \windows directory.
Go to HHC customizer. select the weather tab, selesct custom database, select add city enter you city exactly like this (use your city info of course):
Palo Verdes, CA USA 90732
No periods in USA or after the state abbreviation.
You will only see the citys taht are entered into the custom database, that's why only the one shows up.
Ok, stand by
ok, I downloaded the attached file you have on your last post. I unzipped it on my device and put everything under windows then soft reset and still no luck. I did notice that your file had an Opera icon (weather cities) in it. The other that I downloaded from above did not have this.
Thank for you time, any other suggestions??
I have put so many different files in here to try and get it to work, I will just load my saved "back-up" and start again.
Any help from you guys!! I really would like this application to work. Everything else I have installed has worked w/o problems except this one.
Simple' I just want to be able to located my city!!!!
I can find it on any other weather program.
To make this clear, this are the programs I have installed, is there any more I need?
HTC Home plug In
HTC Home Customize (I believe that the weather patch is installed in this program already?/? correct??)
The attached .dll file that's attached above.
Is this all I need to retrieve other cities??
I am determinded to get this right, as you can see!
Unfortunately I'm not able to help you with the HTC Weather piece, but I am running PocketWeather from http://www.sbsh.net and checked and your city is available in there. So if you are unable to get this fix and still want weather, this is an option. Unfortunately it isn't free, but you could always download a trial and see if it works for you before buying.
Another free option would be WeatherToGo from http://www.tonaya.com/products/wtg/index.php but I don't know if they have your town in there or if it can be customized.
Good luck in your quest.
Thanks, I think I will just go ahead and purchase the sbsh weather.net program if I can not resolve this issue.
1. Install HTC Home Customizer 1.05 whic I think u said u did.
2. Start HTC1.05, in the weather tab, change your city and add to the custom database.
3. Soft reset.
4. Sync phone with pc. (its just easier this way, trust me)
5. Once synced copy the .dll file I uploaded earlier (using ur pc not the phone) and paste it to the windows folder of your phone.
6. Soft reset.
7. Now you must be able to access the internet with your phone for all of this to work. Click the weather tab and click in the area where it asks you to and it will download your weather data.
Hope this helps.
I downloaded the v0.8 version of the cutomizer, does this amake a difference?
Did you go back into customizer & re-enter the custom city data & make sure there are no periods?
I've followed your directions, when I tried to paste the dll file into my windows directory through my PC, the windows directory did not show up. So I tried to copy it from the my documents directory to the windows directory using the file explorer on the phone and it said it could not copy over the file due to access restrictions. Any help would be greatly appreciated. I live in Idaho and the closest city I can get is 4 hours away.
swatcop1 said:
I downloaded the v0.8 version of the cutomizer, does this amake a difference?
Click to expand...
Click to collapse
Ok you are just trying to find an HTC Home that will let you get your local weather? If i am correct, then download and install these files in order:
http://weather.not2advanced.com/files/SdkCerts.cab
http://weather.not2advanced.com/files/htchome-2.1-n2a.cab
http://www.pocketemu.com/request11.html
Once all 3 are installed, run the customizer and set up your weather!
I've got mine to work with all the aforementioned assistance. However, it only updates the weather either via WIFI or ActiveSync. Is there no way to get this to work through the proxy?
Thanx.
Ericc191, thanks for that post. I'm wondering if that will make a city work that doesn't work when you edit the xml? I tried before doing the regedit change to add my code in, but it still couldn't find it through accuweather.
Ok - I admit it - I am indeed seemingly the only person in the world who doesn't regularly view YouTube!
Therefore I'd like to remove it from my Favourites list on the Internet tab of TF3D.. although from what I can see this one is hardcoded (and not an Opera Favourite, indeed this link actually opens up the YouTube client and no Opera).
However.. while on the subject.. has anyone figured out how to control the ordering that these Favourites are displayed on the TF3D tab? From what I can make out, while within Opera they are alphabetic, in TF3D they are listed in the order they were created.
All ideas/suggestions welcomed! Thanks.
youtube...
No, you're not the only person. I don't watch youtube too. I'd like to remove it complete from the device. Any chance?
Well.. I've removed the whole internet tab from TF3D altogether (using TF3D config).
It's nothing but a globe and some links.. which I can also get from the programs tab. Ya might wanna try removing this whole tab and adding the opera link into your programs tab instead
I do not use it 2
I also had a problem with the internet tab. In my case (MDA compact IV) the opera favorites weren't displayed on the tab.
I've been searching the diamond and found some xml files in the following directory:
\Application Data\manila
There are several xml-files, choose the one for your own language-country combination. This file determines the contents of the internet tab.
1) Make a backup of the xml-file
2) Clear the read-only and the system flags of the xml-file.
3) Make the necessary changes.
4) Save and you are ready.
To remove the you-tube link, You'll have to delete the <link .... > entry from the <OperatorLinks> section.
P.S.
While you're there, you can also remove the <banner > field to get rid of the logo, and remove/change/add OperatorLinks ( e.g. the Search link), and detrmine wether you want to display the opera favorites.
By Christ. Removing the internet tab just to get rid of a bookmark is a bit bloody over the top!
Just delete the bookmarks you don't want from opera and they disappear.
How hard do you really need to make it??
Sheesh!!!
I realise that t-mobile and the other networks may have screwed with the touchflo to bugger it up, but if you have an HTC branded one then just edit the opera bookmarks!!
@Mods: perhaps someone could merge all these threads as they are all about the same topic:
http://forum.xda-developers.com/showthread.php?t=408035
http://forum.xda-developers.com/showthread.php?t=408641
The solution posted above and in the other threads seems only to work for the MDA compact IV but not for the Diamond. Does anybody know how to change the internet tab on the Diamond?
Many thanks to all - I'd given up hope after my first ask
It's nice to be able to add icons for the operator links (only 62x62 tho')
Patrickw_mdav said:
I also had a problem with the internet tab. In my case (MDA compact IV) the opera favorites weren't displayed on the tab.
I've been searching the diamond and found some xml files in the following directory:
\Application Data\manila
There are several xml-files, choose the one for your own language-country combination. This file determines the contents of the internet tab.
1) Make a backup of the xml-file
2) Clear the read-only and the system flags of the xml-file.
3) Make the necessary changes.
4) Save and you are ready.
To remove the you-tube link, You'll have to delete the <link .... > entry from the <OperatorLinks> section.
P.S.
While you're there, you can also remove the <banner > field to get rid of the logo, and remove/change/add OperatorLinks ( e.g. the Search link), and detrmine wether you want to display the opera favorites.
Click to expand...
Click to collapse
Did anybody notice that this doesn't work anymore with the new 1.93 HTC Rom?
Any new trick to remove the youtube link?
Any more ideas?
Begin to hate youtube
rhedgehog said:
Just delete the bookmarks you don't want from opera and they disappear.
How hard do you really need to make it??
Sheesh!!!
I realise that t-mobile and the other networks may have screwed with the touchflo to bugger it up, but if you have an HTC branded one then just edit the opera bookmarks!!
Click to expand...
Click to collapse
Hey retard, why don't you shut up and go back to kindergarten! He can't DO THAT. It is NOT an Opera bookmark and you can't just delete it. If it was he would have done that - don't assume everybody is as stupid as you.
XDA II said:
Did anybody notice that this doesn't work anymore with the new 1.93 HTC Rom?
Any new trick to remove the youtube link?
Click to expand...
Click to collapse
I just deleted the entire OperatorLinks section and that worked fine.
Kermode said:
I just deleted the entire OperatorLinks section and that worked fine.
Click to expand...
Click to collapse
It's not working here. I removed the also the whole OperatorLinks section and you tube still there. I've tried to remove the read only flag and the system flag of the file. Try to softreset and deactivating touchflo3d before changing the file. Nothing works for me. Also i've searching the whole windows directory for other occurencies of the text 'you tube' and found nothing related. Additionaly I tried to changed the text 'you tube' in the OperatorLinks section, but the text didn't changed in the touchflo3d after restarting.
I'm using 1.93.
I, too, am interest in this! I'm sure there has to be a registry entry to remove it. Oh registry wizards?! Where art thou???
This variant worked on Touch diamond 1.93.
I thought I was the only one that didn't see youtube as the meaning of life and the Internet. It appears that we are at least a handful.
I did something VERY similar to the above and it worked (first shot) on a TD with 1.93.
But since the above didn't work for all, I better describe EXACTLY what I did:
1) By activesync copied the XML-file to PC
2) Removed RO-fileattribute
3) Opened it with notepad
4) Renamed the <Banner to <BBanner
5) Renamed (both halfs) of <OperatorLinks> to <OOperatorLinks>
6) Saved the file
7) Copied it back to another dir on th TD
8) Removed RO on original
9) Used TotalCommander to copy my changed file over the running.
10) Pressed the red reset-button
And look and behold. After boot It worked. The globe also went.
I noticed that the .qtc files mentioned in the .xml doesn't exist at the location given. e.g.
DefaultImagePath="\Windows\HTC\Assets\Images\InternetPortal\banner.qtc"Nor anywhere else?
Actually the whole structure
"\Windows\HTC\doesn't exist!
Nor is there anywhere a directory or registry entry "InterNetPortal" nor "Assets"!! So this is all very strange...
But the interesting thing is that the widget now only shows my favorites.
Hope it works for others as well.
I must emphasize that I didn't try the original method, so that might also have done the trick.
After change, the file looks like this
<?xml version="1.0" encoding="utf-16"?>
<InternetPortal>
<IncludeUserFavorites>True</IncludeUserFavorites>
<BBanner
DefaultImagePath="\Windows\HTC\Assets\Images\InternetPortal\banner.qtc"
SelectedImagePath="\Windows\HTC\Assets\Images\InternetPortal\banner_selected.qtc"
Text="Start webbrowser"
Width="480"
Height="215" /> <OOperatorLinks>
<Link
Text="YouTube"
Executable="\windows\youtube.exe"
ImagePath="\Windows\HTC\Assets\Images\InternetPortal\youtube.qtc" /> </OOperatorLinks></InternetPortal>
----
After some more testing, I found out that the very odd values for "DefaultImagePath" and "SelectedImagePath" are MAGIC words! They could be replaced with 'any' picture-file. If the path or filename is invalid/nonexistent the picture is omitted. If these two magic values are used the standard globe will be used. The picture is scalable by height/width
Order of Opera favorites on widget, opera6.adr format
The favorites are shown on the widget in the order they appear in opera6.adr.
Opera6.adr is a rather plain text-file. But please note that by default the unix-style <LF>-only is used as line separator.
So if possible avoid editing with windows notepad, or change the <LF>'s
In vista-notepad <LF>'s are treated as zero-width blanks(!!), so it's VERY easy to get confused and mess things up. I wasted a lot of time, thinking it was a proprietary format, before I discovered the <LF>'s...
Opera Hotlist version 2.0
Options: encoding = utf8, version=3
#URL
ID==12
NAME==Google
CREATED==1223404383
URL==http://google.co.uk#URL
ID==13
NAME==About:blank
CREATED==1223404383
URL==about:blank
The second dummy-link
About:blankis useful when the globe is removed from the widget, just to open the browser. I recommend it as link number FIVE, to get it as the lowest of the five shown on the widget without swiping.
eske.rahn said:
The favorites are shown on the widget in the order they appear in opera6.adr.
Opera6.adr is a rather plain text-file. But please note that by default the unix-style <LF>-only is used as line separator.
So if possible avoid editing with windows notepad, or change the <LF>'s
In vista-notepad <LF>'s are treated as zero-width blanks(!!), so it's VERY easy to get confused and mess things up. I wasted a lot of time, thinking it was a proprietary format, before I discovered the <LF>'s...
Opera Hotlist version 2.0
Options: encoding = utf8, version=3
#URL
ID==12
NAME==Google
CREATED==1223404383
URL==http://google.co.uk#URL
ID==13
NAME==About:blank
CREATED==1223404383
URL==about:blank
The second dummy-link
About:blankis useful when the globe is removed from the widget, just to open the browser. I recommend it as link number FIVE, to get it as the lowest of the five shown on the widget without swiping.
Click to expand...
Click to collapse
How did you edit it finally?
Vista WordPad?
EDIT:
I stopped touchflo, removed read only and system checkmarks on the file. Copied it over to the PC. Used Vista wordpad to open it. Edited it and when finished clicked save. Copied the new file over to the phone, replacing the one there. Started up touchflo and it worked!
FuzzyLogic_FC said:
How did you edit it finally?
Click to expand...
Click to collapse
Well when I discovered the LF's it was easy. Just replaced LF with CRLF, this can be done in many editors.
Timbermill said:
Many thanks to all - I'd given up hope after my first ask
It's nice to be able to add icons for the operator links (only 62x62 tho')
Click to expand...
Click to collapse
How'd you manage to add icons for the operator links and are they limited to 62x62 simply due to the available space? Can icons be added for the favorites too?
"thank you for pasting the original xml file" helped me in restoring the default globe and removing telstra wap links especially the bigpond image!
Essential processes for AT&T Tilt Users after each rom flash
I know this has been mentioned thousands of times throughout this forum yet n00bs often need assistance fixing their hardware keyboards, email, HTC weather, quick gps, and so on after they flash a new rom for the first time.
While hanging out in Bansville for a couple of days I realized I have been answering the same questions continuously. This is a mini text tutorial, which offers simple fixes for imperative AT&T settings.
So you installed a version of hardspl, flashed a new rom, and performed a hard reset. What next? Well primarily in all probability, you want to make sure the clock settings are in am and pm format and the date is set to m/d/y. To change your clock settings follow this navigation
Start>settings>system>regional settings>time tab>time style drop down set to h:mm:ss tt
To change your date setting:
Start>settings>system>regional setting>date tab> select the date style of your choosing and select ok.
Next, I like to restore my files such as my appointments, contacts, text messages, etc. I personally prefer to use PimBackup. Below is a .zip file for PPCPimBackup. It is an uncomplicated program to use and a lecture is unnecessary to navigate throughout this application, as it is straightforward.
After I restore my files, it is time to inaugurate the Tilt keyboard fix, which repairs your slide-out QWERTY keys to be mapped correctly. For example, without this fix Fn+W will appear as ! opposed to @. Below is the cab file you need to install to remap the keys appropriately. Following the installation of this cab file, perform a soft reset.
The next thing I usually do is correct my connection settings. First, I install ATT_Settings.cab, which you can find below. Then I navigate to the following:
Start>settings>connections>connections>select the advanced tab>select networks>Change both drop downs to Media Net> select edit on both drop downs>proxy settings tab>uncheck everything for both media nets that you changed>then hit ok or x when you are finished.
At this time, I set up my email. However, remember NOT to save your password, you will do this in the following step. If you are using HTC HOME, most likely you are, select the little envelope and create a new account. You can find your email settings by using google if you are using pop3 or whatever.
Next, after I set up my email without saving the password, I install removehiddenproxy.cab, which you can find below. This cab file is important as it allows your pop3 email account’s password to save without adding extra characters, allows for your quickgps to function properly each time, and it also allows you to use HTC Home Weather without getting a connection failure. So install this cab then go back to the email you just set up, edit the account setup, enter your password, and save it. Now, go back to your today screen and tap your weather tab. Now tap Select City and select your city (*Note there are a few patches available to select your town if you do not live in a big city). Anyhow, notice the menu button where your right softkey is, select menu and turn your temperature scale to Fahrenheit and select done.
I suggest setting up your WiFi at this time too.
Well this is my mini tutorial for a basic setup on your AT&T Tilt after you flash a new rom.
Have Fun Flashing and Take Care.
*Special thanks to the creators of these cab files and JimmyMcgee for teaching me the basics.
Am I missing something too?
Is there something to do regarding getting a reasonable GPS fix after flashing newer 6.1 roms or is it a known problem. I keep flashing down to older 6.0 roms with 1.27.14.09 radio because of the faster GPS fix. I would love to use the newer roms but GPS fix time is a deal breaker for me. To save you some time I use SPL 3.28 with 6.0 roms and 3.56 with 6.1 roms. I bounce between Q-mobile and RomEos roms now that we lost dutty. Ive tried all the newer radios and personally they all stink for GPS. Sorry about your brief ban and welcome back, I need your wisdom
*cough* sticky
AWESOME. I keep saying I need to: Start fresh, get NetCF 3.5, get a light rom. But it all seems so complicated to go from current configuration to start over completely, but this will help a lot! Thanks! Now to find the time and the 'right' ROM.
Thanks very much for the reminders, and for the CABs. I flashed my first 6.1 ROM last night, and forgot all about the hidden proxy!
I agree that this really needs to be a sticky...
This is a good tutorial, but here is a good side note to add.
By removing the hidden proxy (which ya do with the removehiddenproxy cab), Tilt users won't be able to get to media net (http://device.home or http://home) or cingular video as the hidden proxy is needed for those.
Then they should just use the Restore Proxy, and that will allow MEdiaNet.
Proxy Manager has both in it.
myteematt said:
Ive tried all the newer radios and personally they all stink for GPS. Sorry about your brief ban and welcome back, I need your wisdom
Click to expand...
Click to collapse
Did you try 1.71.09.01 ? http://forum.xda-developers.com/showthread.php?t=410953
Been having the same issue and finally I think got a break. Tried about 10 SR's and the lock times are steady inside the house.
BTW using DK2
does windows mobile have a localhost file like windows? would remapping those to their needed servers allow the bypassing of the proxy?
mbarvian said:
*cough* sticky
Click to expand...
Click to collapse
+1.
Nice tutorial
I downloaded your PPCPimBackup zip file but when I attempted to open it I received the following prompt: "The central directory was not located . . ." etc.
Thanks for the post BTW. Very helpful and informative.
the Dragon said:
I downloaded your PPCPimBackup zip file but when I attempted to open it I received the following prompt: "The central directory was not located . . ." etc.
Thanks for the post BTW. Very helpful and informative.
Click to expand...
Click to collapse
you were unable to open the zip file? I'll check it out and reupload it if necessary.
edit: works ok here my friend. Unzip the file to your desktop and move it to your storage card then run the program hopefully it works for you.
myteematt said:
Is there something to do regarding getting a reasonable GPS fix after flashing newer 6.1 roms or is it a known problem. I keep flashing down to older 6.0 roms with 1.27.14.09 radio because of the faster GPS fix. I would love to use the newer roms but GPS fix time is a deal breaker for me. To save you some time I use SPL 3.28 with 6.0 roms and 3.56 with 6.1 roms. I bounce between Q-mobile and RomEos roms now that we lost dutty. Ive tried all the newer radios and personally they all stink for GPS. Sorry about your brief ban and welcome back, I need your wisdom
Click to expand...
Click to collapse
I deserved the brief ban.
Anyhow, I noticed that when running 6.1 roms with the Tilt you need an application such as HTC GPS Tool or GPS Test, to open your internal gps, prior to opening your GPS Software.
These are the steps I use to utilize a GPS Fix after each soft reset:
1) download latest updates for quickgps
2) Open GPS Tool>com 4>baud 4800>Hot Start>Then click Open and wait like 30 seconds
3) Open TT7
*If you fail to get a fix after following these steps close all programs and repeat. Eventually you should be getting fixes within seconds.
I've attached GPS Tool for you, good luck.
What exactly does the remove hidden proxy cab do on AT&T Tilts? If you go into your connection settings and uncheck the proxy server- is that the same thing or something different than the cab file does?
Hey Red,
I attached an ATT settings cab which does not enable the proxy by default, and also enableds creation mode in MMS settings. I thought it might be helpful for your thread here. Also, it may seem too advanced for beginners, but i have a thread started here:
http://forum.xda-developers.com/showthread.php?t=418468
This has a step by step guide to how to create an xml file using Schap's Advanced Config 3.0, which can be used to provision all of your advanced config preferences during your UC setup. This tool has really made it very easy to do reduce the amount of work that goes into flashing.
I also attached a cab for total commander, a free, more full featured file explorer; gps test, another gps tool; and advanced config 3.0. Hope it helps.
Thanks... this is a great thread!!!
SaltyDawg said:
What exactly does the remove hidden proxy cab do on AT&T Tilts? If you go into your connection settings and uncheck the proxy server- is that the same thing or something different than the cab file does?
Click to expand...
Click to collapse
/bump
I'd really like to know this too!
Why would anyone ever want the proxy checked? Does it do something for you to have it checked?
sinning said:
/bump
I'd really like to know this too!
Click to expand...
Click to collapse
It removes a HIDDEN proxy, one that you can't remove without a cab. Without it enabled you can't connect to medianet home, and some other things. Most users like to disable it for a myriad of reasons, one of which is that it causes you to be unable to browse while connected to your laptop.
The box that you check in connections is a separate issue, and i think that is actually just old settings, i'm not sure, since even on the AT&T website it tells you no not to have that checked.
scotchua said:
It removes a HIDDEN proxy, one that you can't remove without a cab. Without it enabled you can't connect to medianet home, and some other things. Most users like to disable it for a myriad of reasons, one of which is that it causes you to be unable to browse while connected to your laptop.
The box that you check in connections is a separate issue, and i think that is actually just old settings, i'm not sure, since even on the AT&T website it tells you no not to have that checked.
Click to expand...
Click to collapse
Awesome. So, if I run the cab and remove the hidden proxy- can I then tether my laptop (connect to the net using the Tilt's data)- without getting caught by AT&T? Or is there more to tethering without getting caught?
I recently upgraded my Acrobat Reader without uninstalling the former version. Everything worked fine. Then I uninstalled the old version and it seems to have taken the file association for PDFs along with it. While looking for a solution, I found a lot of complicated schemes to modify the registry (no thanks), install a tweak program and do it from there (better, but why complicate things), etc. But it was actually quite simple. So for anyone who's in a similar predicament...
Here's how to set a file association in WM 6.1:
1. Open File Explorer and find a file of the type you want to associate to an app.
2. Hold down the stylus on the file name for a couple seconds (til you get the context menu) and choose "Open with program..."
3. Choose a program from the list on the top part of the resulting window, then check the box labeled "Associate selected Program with this file type."
4. Hit Open.
5. You may get a message to overwrite current association if there was a previous app associated with the file type, chances are you'll want to go ahead and overwrite so it will remember the association you prefer.
You're done!
This works great if you want to open some multimedia files with one program and others with a different program. For instance, I couldn't get Media Player to open my .AVI files, but it was the default association, now I set .AVIs to TCPMP and all is working great! ( I know TCPMP is one of the few programs that lets you set the association, this is just an example - and it was actually easier doing it as described above!)
That menu option's not there
I've got 6.1, but "open with program" is not a choice that pops up. I looked under properties, and it's not there either. Are you using a 3rd party file explorer?
You need File Explorer Extension, here http://forum.xda-developers.com/showthread.php?t=421723&highlight=file+explorer
Nice!
Thanks for the tip!
I have a several different media players, and this is just what I needed to choose which program opens what file type.
Thanks again!
Thanks guys, really good software that complement very well the unfinished software of Microsoft..
Great for removing the "DocsToGo" association!
I was really getting sick of being unable to open email attachments because I didn't choose to shell out for the DocsToGo bloatware on my AT&T Fuze. Great fix!
Thanks!!!!
MadSci
Thanks for the software but there is a problem
The file explorer is amazing. But I am facing a problem. I have an HTC Touch 3G running windows mobile 6.1. When I use this file explorer to change the file association, it successfully changes. However, the icon of the program it is associated with doesn't appear on the left of the file name. Only the windows icon appears to the left of the file name. However whenever I click on the file, it does open with the required software/player. But because the icon of the file type it is associated with does not display, it becomes slightly confusing for me to make out with which software will it open.
Thanking you in anticipation for the help!!
thanks a lot
FExplorer ext is a gr8 tool. It solved my file association problem for .jpg files.
Thank a lot again.
I tried to install FEE on my WM6.1 smartphone (non touchscreen) but it gives an error and won't install saying it's not designed for my device.
Has anyone found a way to install it, or found a similar free product to change file extensions?
I tried to install FEE on my WM6.1 smartphone (non touchscreen) but it gives an error and won't install saying it's not designed for my device.
Has anyone found a way to install it, or found a similar free product to change file extensions?
Click to expand...
Click to collapse
Schap's Advanced Config can also change file associations, as can Total Commander.
DaveTheTytnIIGuy said:
Schap's Advanced Config can also change file associations, as can Total Commander.
Click to expand...
Click to collapse
Thanks, I'll have a look at those.
There's any way to Vito SMS chat instead default WM app for SMS managemment ?
Thank you
very very thnx to you
still not the correct icons ?
same as @sahilhshah.
Changing the file associations in either described way is working fine. But the icons are still the windows system icons.
Interestingly viewing the icons from the files which are not corrected to the specific program icon, in the taskmanager, I can see the right icons.
Any ideas?
Using Total Commander for Pocket PC u can change file association and file icon as well, it will be coresponding to specified program. Just give it a try
(That's my firsth post on this great forum )
Hi people.
Could you help me? I tried to change the file association, as explained, but my phone isn't touch screen (is a Samsung Jack) and the File Explorer Extension doesn't work.
Someone know a way for change the file association on Win 6.1?
I lost the association when try Foxit pdf reader. Now I have to open the Adobe PDF fist and open the file by the program (I already uninstall the Foxit).
Thanks in advanced.
brneluz said:
Hi people.
Could you help me? I tried to change the file association, as explained, but my phone isn't touch screen (is a Samsung Jack) and the File Explorer Extension doesn't work.
Someone know a way for change the file association on Win 6.1?
I lost the association when try Foxit pdf reader. Now I have to open the Adobe PDF fist and open the file by the program (I already uninstall the Foxit).
Thanks in advanced.
Click to expand...
Click to collapse
You can change the name and the file associations using Total Commander ( for Smartphone )