I run my own email server at home. When my HTC Touch Diamond is connected to my home network say via WiFi I need to contact my server (defaria.com) with it's private IP (192.168.x.x). However when I'm connect to the internet via say WiFi I need to contact my server via its public IP address (65.101.22.21).
What I want to do is override defaria.com's IP address but only on my internal WiFi connection. IOW I wish to set the /etc/hosts for this specific WiFi connection. Can this be done?
Related
I'm having a bit of an issue with pptp on the Kaiser. The handset is provided by Vodafone so it's branded a v1615, I've not flashed it with anything yet.
I can create and establish a pptp connection via 3g to my server successfully, however as soon as I either go to messaging (setup for imap to the server's internal IP) or PIE to access OWA the pptp connection just drops.
Anyone any ideas?!
Bit of an update - in Messaging the network to use was wap which had an incorrect access point set. I changed it to work, set the access point to internet (I'm on Voda UK), username & password of web.
Then I created the pptp connection under VPN for this (the work) connection.
Now in messaging when I hit send/receive it dials the 3G connection, succeeds, then establishes the pptp connection successfully. And stays connected.
Only, still no mail - it reports back unable to retrieve new messages or contact server.
On the server, it shows there is a ras client and gives it's IP (obtained by dhcp).
I can't ping it (the kaiser) through the vpn.
I can't get imap to work through the vpn from the kaiser to my server.
I can't get RDP to work through the vpn
I can't get PIE to access OWA when addressing the internal IP of the server through the vpn.
I know these services work via this same pptp connection from another windows box. It's almost like it's not routing traffic down the tunnel. Vodafone don't seem to be blocking it as it is establishing a connection. Anyone any ideas??
This is more than frustrating. PPTP connection establishes fine, RRAS reports back an IP address for the logged on client.
I've tried using vxutil on the device (http://www.cam.com/vxutil_pers.html) - when the tunnel is reported as up, it is unable to pass any traffic through the vpn it seems, no tcp, udp or icmp. Nothing.
I have tried adding the server ip address under exceptions, also *.*, but no difference.
I ran Ethereal/Wireshark on the server, not one packet even reaches the server, this pptp connection is useless and somewhat of a let down.
I guess nobody else uses pptp at all? I would have thought I had a fairly standard setup with a W2k3 box nat'd behind a 3com router/firewall.
PPTP works fine on any other device apart from this..
Just so share my experisnce with VPN. I have configured PPTP using the WM6 VPN client and I am able to establish connection on my Kaiser(stock rom).
The connection works fine in PIE when I use it to access one of my servers via HTTP. In fact, I just need to point PIE to the URL of my server(internal IP. I have to set the IP in the hosts file in the registry) and it will automatically dial into my VPN.
For RDP, I am also able to login to my server but strangely the connection will automatically drop after 3 mins or so. I am also unable to get the RDP client to automatically use VPN. I have to manually establish the VPN connection myself.
You may want to try some other VPN clients and not the WM6 VPN client. I have read some threads in the past in this forum regarding other VPN clients that work on WM6.
I heard that you can access you Linksys router using your phone as long as you are connected to you wireless network and have web access. I have been unable to get this to work... Any ideas anyone?
Same way you would for anything, has nothing to do with the Tilt... If you're doing it from the internet, you have to turn on something which is likely called "Remote Administration" or something similar and access your internet IP address in a browser.
From the wireless network itself, just go to the router's IP address in your browser.
if you are at home and connected to your router via wi-fi just open your browser and in the address bar type in 192.168.1.1 (usually the default address for linksys router, otherwise look up correct address for your model). you will be prompted for user ID and password default admin:admin. this is the same way you access your router from your PC. it is also possible to access your wireless router at home when you are away by just using media net (or whoever your carrier is' data connection.) just like khaytsus says, you need to first turn on remote access while connected to your router from home.
Hello All,
Internet is not working on my laptop when I use my Incredible S's WIFI Hotspot. Connection is ok with following IPs:
Laptop IP: 192.168.1.80
DHCP Server IP: 192.168.1.1
DNS Server IP: 192.168.1.1
Default Gateway: 192.168.1.1
When I use USB tethering everything goes fine but when I use WIFI Hotspot, internet doesnot work. I configured that my Laptop is unable to get the DNS resolution from my mobile as I can still connect Skype on my laptop.
I cannot ping www.google.com but if I can put the direct IP of google server (like 173.194.34.164) I get the ping response. This means my DNS server is having problems in resolving web addresses for my laptop.
I am using stock ICS 4.0.4.
Please help
hi
did u tried disabling firewall
Work WiFi... Our company uses a static IP. Well I can not get my phone to connect to the internet. The phone will connect to the router. It will obtain an IP but it will not connect to the internet. I've gone in changed settings in the phone to static IP.. used the DNS in the router as well as Google DNS and still no luck.. ios devices hook up to this router just fine after changing their static IP settings.. Any thoughts??
Whether you get an internet connection or not - assuming you're using the right password, encryption, mask, etc., is up to the settings in he router. Ask the network admin to set your phone's IP address and MAC address to get a full connection.
I have to use a vpn for incoming services using sprints network. Im connect to my vpn on my phone and route the vpn through my hotspot so every computer gets the public address and all that is working. My hotspot config is gateway 192.168.2.1 and the ddwrt router that my clients connect to is 192.168.2.5. Problem is. When i connect to the vpn it changes the gw and i cannot ping or connect to any services on 192.168.2.5 from the phone. However i can ping 192.168.2.1. Can someone tell me how to add a route so that i can talk to 192.168.2.5 from the phone when the vpn is connected. Thankyou my phone is rooted.