Hi everyone,
I currently have a USB to 3.5mm audio adapter that I use to stream radio and listen to mp3s in the car. As Ontario is going to pass a law saying that we need to use handsfree when driving, I also need to get a handsfree device.
If I buy a bluetooth headset, and connect both the audio adapter and bluetooth device, when a call comes in, which audio input will take the call? Also, when I play mp3s, the sound will come out from which device?
Thanks for your help!
I recently got one of these off amazon in the UK, I was fed up looking like a taxi driver with a headset on.
This streams from the phone and has a mic for calls. You can also play mp3 from cds.
This Link is to the Canadian sony shop, but you might get it cheaper.
HTH
MG
Thanks for your help, but I don't think I want to install a new car deck just so I can listen to calls on my phone. Rather spend that money somewhere else
Related
Hi All,
I'm wanting to use my Diamond in the car to replace both my old iPod and sat-nav, while still having phone functions available. There are a few things I'm not happy with, so I thought I see what other people are doing.
I have a car head unit with a direct 3.5mm line-in, which used to have the iPod on the end. The Diamond works fine plugged into this through an ebay 3.5mm\USB adaptor.
If I plug the 12v>USB charger in, I get a whine over the audio - not a big problem, it's just a ground-loop, so I'll stick an isolating transformer in-line.
The main problem I have is switching between the internal speaker and the external output. If I want to have the radio on, rather than MP3, I have to unplug the adaptor, and plug the charging cable in direct, so that I can keep the battery charged - not ideal. This way I can hear the TomTom voices through the internal speaker, but it seems wrong to have to swap leads this way.
The other main problem is if I have MP3 and TomTom all through the stereo, and I get a call, I can hear the call over the stereo, but can't speak, as the Diamond is expecting an external microphone.
I guess what I need is a utility to force only the internal microphone to be used, and to allow me to force the internal speaker when I want to use the radio. It there such a thing?
I think one of these car holders has an option to plug in charger and usb-3.5mm jack adapter at the same time....
http://www.dsldevelopments.com/brodit/Holder/HTC+Touch Diamond-Brodit-Holder.asp
If i had the skills i'd try to figure out a hack to pause/mute the mp3 and mute satnav when in a call... but I don't.
That's not the problem - I can plug in the charger and 3.5mm audio at the some time, but that redirects all the audio to the car stereo, and disconnects the mic. Removing the adaptor and plugging in just the charger enables the microphone, but all my MP3s then are played through the internal speaker.
What I need is a utility to force the internal microphone to be used _all_ the time, and let me choose when to use the internal speaker when a headset is detected.
I don't suppose anyone knows how the Diamond recognises a headset? Is there a resistor link across a couple of the pins in the 11pin connnector? I'm just thinking I could make up a cable with a switch to break that contact, and 'virtually' disconnect the headset when I want the radio, or need the microphone active during a call.
You could try this program. It seems to be a virtual switch between the earpiece and external speaker. I use it a a solution for skype and other voip programs that only work through the external speaker, but the works the other way as well.
headset instaled but need phone mic allways enable
Hello,
Kaysee_sw said:
The other main problem is if I have MP3 and TomTom all through the stereo, and I get a call, I can hear the call over the stereo, but can't speak, as the Diamond is expecting an external microphone.
I guess what I need is a utility to force only the internal microphone to be used, and to allow me to force the internal speaker when I want to use the radio. It there such a thing?
Click to expand...
Click to collapse
I have the same issue of kaisee.
I use the diamond as mp3 player in my car stereo (aux-in) and i need the mic allways available to use the phone without disconect the usb or audio plug.
In my old magician this worked just fine becouse the mic was allways available.
Is the .exe posted by dctech the answer(thanks man) ? has anybody tested ? is it reliable or there is another solution?
Thanks
You need a proper bluetooth car kit to allow this. Parrot ones are very good. If you want to listen to music as well as phone calls and sat nav i would suggest that you get one with both handset and A2DP bluetooth profiles. There is a workaround app you can use to get music through a car kit with just a handset or headset profile but the quality is mono and very poor
So, I have a new Toyota Avalon with built-in bluetooth. Was wondering if anyone knew of hacks, tricks, tweaks - software or hardware - to permit a2dp to show up when connected through bluetooth. It says HANDSFREE but doesn't show WIRELESS STEREO on my ATT TILT (stock rom).
Anyway to do this?
Also, for anyone with a Toyota and bluetooth, is there any way to get Microsoft Voice Command activated from the steering wheel? On all my external car bluetooth speakers, hitting the call button activates Voice Command. Doesn't do it with the built-in Toyota system...unless I am overlooking something.
BUMP....
Is there someone on the forum with a Toyota and bluetooth?
I am bummed about this...the only way I can stream or play audio is use the AUX jack which is fine EXCEPT it means that the phone cannot be used via the built-in blue tooth...the other party can be heard by the car microphones don't pick up my voice (presumably because the AUX connector somehow hijacks it???!!)
Any help would be appreciated.
freddiemac1 said:
It says HANDSFREE but doesn't show WIRELESS STEREO on my ATT TILT (stock rom).
Click to expand...
Click to collapse
That's what would happen if the car's BT did not support A2DP. My guess would be that your car only supports handsfree.
I'm in the same boat. I have an '07 Sienna and I have been looking for a way to connect AD2P bluetooth. So far, I'm having no luck.
I've thought about mounting my i.tech clip inside the dash to the Aux input. That means I'd have to modify the i.tech to work when power is connected. I would also have figure out a way to use the Aux port directly (with another device) if I wish. It is always something...
The '09 Toyota's support the AD2P.
works for me
so, I am in a '10 toyota. When I get into the car, it will pair up as handsfree, but does not show AD2P initially. For me at least, if I go to the BT tab on the audio screen, and press and hold the play button, it will start playing from the last playlist I was using. The steering wheel seek up seek down work to skip forward and back.
The first time I needed to initiate some music playing on the phone, and then tell the car to connect bluetooth through the BT tab on the audio menu, I think it hides the AD2P unless the phone requests it, and treats it separately from the handsfree connection.
I wish you luck- for short trips, it is great to be able to just sit down in the car, and have the radio play my mp3s without having to muck with my phone or cables.
I bought a connection for my diamond to connect to the aux input of my car stereo sort of hoping that it would work by allowing me to use the car speakers to speak & listen from phone, listening was not a problem, crystal clear but the person on the other end could not hear me. Is there an easy way to get this sorted? My stereo does not have bluetooth.
Depends on what sort of "connection" you have bought and how it works. Is it meant to be a handsfree unit, in which case it should come with its own microphone?
Or is it a USB type headset lead unit that is only meant to be used as a means of playing music via the car stereo, in which case you probably can't attach a microphone and can't use it as a handfree unit.
The way to sort it is to buy a bluetooth handsfree unit complete with microphone. These communicate with your phone using bluetooth and can either have their own amp and speaker or be wired into your car audio (usually via the phone facility in the DIN connector on the back of the car unit).
If you want to use for both phone calls and listening music it is best to get one that supports multiple Bluetooth profiles, including handsfree and A2DP.
Hello everyone,
I can pair my car's bluetooth and Diamond flawlessly... However I am also wondering if it is possible to use the car speakers as output in order to listen to mp3s in my phone... ofcourse via bluetooth...
I know that people can listen to music via their bluetooth dongles on the ear. From which menu or program should i also try for the car?
Thanks in adv.
if the bluetooth in your car support ad2p then it's just a question about bonding them and choosing stereo headset on the phone
but if your car don't there is no way
Thanks, unfortunetely there's not such a function (as far as I checked on the web)
Hi all,
is there a (cheap) solution for transmitting a Bluetooth signal (over my HD2) to Aux Audio? That would be great! Oh and I'm not looking for this for my car, but for a stereo music box (hope this is right word in English!)
greats!
Check these out ..... i bought them froom woot for 12$ ...you can connect ur cell phone to it using btooth and then put the aux cable instead of headphones..
http://s3.amazonaws.com/wootsaleimages/Kyocera_Bluetooth_Dongle_Stereo_Earphones060Detail.jpg
And if you still decide to use it also as a handsfree for calling purposes check the sound quality of the mic before buying (call few friends with it and ask them if they hear you). I did not do it and now I have to use my Philips shb7100 just for listening music over a2dp because the mic is crap (or the AD conversion mechanism)
Bluetooth® Home Stereo Adapter DC800 [Motorola]
I use Motorola Bluetooth® Home Stereo Adapter DC800. this was a costly item 5 years back running up to 100 USD...but now a days you will find seconds everywhere on line and even the new one's shouldnt be too costly....
I am very happy with the performance...I connect my HD2 to this by Bluetooth
And DC80 has a output wire to my Home Theater....and it plays wonderfully.
I also have a Input wire into DC800 from my TV headphones jack....this allows me to use my Motorola HT820 headphones to listen privately late night shows when others are asleep....
try to find them in your country,..who know you might get a good deal on ebay/online.....