Does anyone know why when I send a 300K message, that includes an audio and a picture, it sends it ok but when the recipient recieves it, its only 30k. The picture gets converted to like a smaller version and the audio is converted as well. Very weird
Check the MMS settings in the mail application. Usually MMS are limited to 100kB by default, so whtever you send that would make it over that limit will be converted.
can anyone provide me the cab for setting the mms limit to 3mb? thank you... i'm afraid of using kaisertweak everytime...
Thanks
Here you go....
I've never had this problem because I don't send or receive too many messages.
Regards,
MAC
Thank you so much, i send 10/20 mms everyday and lost that cab, i was lost thank you again
Related
I have an AT&T Tilt. I hit soft reset after a hard reset so that the bloatware didn't install. I can send text messages no problem. I cannot send a picture message. I can sometimes receive them, but I cannot send them from my phone. I have been trying to send them to a Verizon phone and have not tried an AT&T phone. Has anyone had a similar issue where they weren't able to send a picture message and resolved it?
tytn/tytn II mms
Never worked with wm6 correctly (finland, tytn/tytnII)
-Using port 9201 & WAP version 1.2 -> MMS under 70k possible to send and receive, higher not (when sending , it just hangs in 99%).
-Using port 8080 & WAP version 2.0 -> MMS up to 600k send ok, never able to receive "errMsg: error" (your messages cannot be downloaded).
This is only my experience (Elisa Finland). other providers and countries propably work ok.
anyone?
You won't have your AT&T operator settings installed with the method you used to eliminate the 'bloatware' Search for the Network settings cab on this forum as it may help you.
I found out the problem. AT&T can send and receive up to 600k. Verizon can only receive and send up to 350K. I had to change the outbound pictures to QVGA size and had to adjust the video to a smaller file. I guess different have different size limitations. In case anyone else experiences this problem, you need to adjust your settings.
Removing the bloatware does not remove any of the phone settings. It just remove the unnecessary software.
Please go back and edit your start post Title to this thread with {fixed} then others can use it for reference. Cheers and well done.
How do you send images you've taken in normal setting not MMS type?
My images are over 300kb and are too large to osend via MMS.
My operator only allows up to 99KB per mms.
So if I want to send someone an mms, I have to open a new mms, then select take picture (from within the new mms) and then take the picture.
How to resize it to friendly sizes?
Ive tried the "Resize" but that doesnt really resize it much or enough.
Thanks
Have you tried sending it as an email attachement?
I dont want to email it.
I want the receiver to see it on thier mobile (hence MMS).
No, I mean send it as an email attachment from your phone to theirs, or do they not have the ability to read attachments?
hi,
You can choose the picture format in MMS account configuration. Pictures too large are resized
On my stock TYTN II, it asks if I want to resize the large image when I try to attach it in an mms. Problem is that it always put in the original image un-resized no matter what you try to resize it to.
try emailing it to their phones email addy. I know mine is something like
[email protected]
ChumleyEX said:
try emailing it to their phones email addy. I know mine is something like
[email protected]
Click to expand...
Click to collapse
I thought an MMS would go to:
[email protected]
And a SMS would go to:
[email protected]
Could be, I wasn't stating the address as fact but giving him an idea of what it would be like.
CorruptedSanity said:
How do you send images you've taken in normal setting not MMS type?
My images are over 300kb and are too large to osend via MMS.
My operator only allows up to 99KB per mms.
So if I want to send someone an mms, I have to open a new mms, then select take picture (from within the new mms) and then take the picture.
How to resize it to friendly sizes?
Ive tried the "Resize" but that doesnt really resize it much or enough.
Thanks
Click to expand...
Click to collapse
Have you tried to tweak the mms sending and receiving size, to enable you to send/receive pics up to 1mb?
It requires you to do a reg edit.
HKLM/Software/Arcsoft/Arcsoft MMS/Config/UI/SizeLimit
just change all 3 Recvlimit's and all 3 Sendlimit's to either
614400 (which is 600k). or you can do what I did, and put 1024000 (which is 1mb). Or .. you can put 1536000 (which is 1.5mb).
Exit and then soft reset device so the settings will keep. Once rebooted, go your mms configuration settings in your messaging options menu, and be sure to select whatever you've indicated in your reg settings, (600k, 1mb, or 1.5 mb).
Press ok, ok, and youre done. Now you should be able to send a mms message that more than 300k now. Hope this helps.
If you're limited to 99kb per MMS, then I would suggest lowering the resolution of your camera before taking the picture. While its not an ideal solution, it should work...
NotATreoFan -Ya I know I can reduce the size but I also want max quality pictures for PC show.
robosiris- I thought the limit was strictly administered by my service provider. Ill try it and see!
Thanks
CorruptedSanity said:
NotATreoFan -Ya I know I can reduce the size but I also want max quality pictures for PC show.
robosiris- I thought the limit was strictly administered by my service provider. Ill try it and see!
Thanks
Click to expand...
Click to collapse
I thought so too. But with this tweak, I can now send and recieve up to 1mg. You can set it higher but 1mg is good for me.
Also, If you're looking to send/receive pics over 1mb and alittle under 1.5mg, you can try setting it to 1228800 which gives me an option for 1200K, (1.2mb). With these tweaks, you won't (or very rarely) have to worry about changing images sizes.
Hope this helps
Is it possible to send pictures via sms on the Diamond? Or would I have to download a new program for it? Any suggestions, I couldn't find any topics on this one.
I found I could receive text messages with pictures, but the text message gives me a link to an outside site.
Most Diamond ROMs come with a program called Arcsoft MMS already installed. Assuming you have already run Connection Setup, sending and receiving MMS should be enabled.
Sometimes you have to send an MMS before your network will let you receive one properly.
How come when the sms message gets too long, it will be converted to MMS? How do I solve this problem?
bryant_16 said:
How come when the sms message gets too long, it will be converted to MMS? How do I solve this problem?
Click to expand...
Click to collapse
I think your confused.. Im going to assume your trying to send a picture and it says its too large so its converting it to an mms right?
Actually, he's right. On my G1 when I hit so many characters (usually by the end of the 3rd set of 160) it changes to MMS. The reason it does this is so the network can better handle the message. Sending as 3 seperate texts would take more time for the network to submit, store, and resend, than 1 MMS message would.
Quote:
Originally Posted by bryant_16 View Post
How come when the sms message gets too long, it will be converted to MMS? How do I solve this problem?
I think your confused.. Im going to assume your trying to send a picture and it says its too large so its converting it to an mms right?
Click to expand...
Click to collapse
No he isnt confused, when you sent a text that goes over a certain amount of characters it converts it into a mms, i dont think you can stop it from converting it but what you can do is send multiple text massages under the conversion limit
Oh okay, so there is nothing I can do about it?
Not really no. Just when you get to a certain limit and the counter appears showing how many characters you have left, just send it, and start on the next one
Send shorter messages, send an email or IM...
SMS converts to MMS when it gets 3 messages long..it has a character count so stop right before it converts and send it and continue in a new text
ok you want to rid this problem but i would like my tilt to do this aoutmaticly, any way?
Yeah, download HandCent SMS application. It will solve this application.
Okay I may have a mms fix for boost, but it is in .cab format and I'm not sure how or if I can use it. any ideas will help.
APN Settings for MMS on Boost
I'm currently running Incubus26Jc's Super FroYo 2.2 [Deodexed] [RLS12] on my Vogue, on Boost Mobile's network, and I am able to send MMS by attaching picture files in text messaging. The only settings I changed were in the default APN:
MMSC: mm.myboostmobile.com (add http: and // in front. Since this is my first post I'm not allowed to post URLs )
MMS port: 80
No other changes to the APN settings are necessary to send MMS.
I'm pretty sure that it's impossible to receive an actual MMS on Boost's network. You will get the text message with a link to the Media Mail page (which never works, at least for me).
anita_russell said:
I'm currently running Incubus26Jc's Super FroYo 2.2 [Deodexed] [RLS12] on my Vogue, on Boost Mobile's network, and I am able to send MMS by attaching picture files in text messaging. The only settings I changed were in the default APN:
MMSC: mm.myboostmobile.com (add http: and // in front. Since this is my first post I'm not allowed to post URLs )
MMS port: 80
No other changes to the APN settings are necessary to send MMS.
I'm pretty sure that it's impossible to receive an actual MMS on Boost's network. You will get the text message with a link to the Media Mail page (which never works, at least for me).
Click to expand...
Click to collapse
yea i think we would need a media mail app to do so. I have the same issue on my sprint hero. I just visit mediamail.boostmobile.com to view my messages from my phone.
my evo works perfect on sense but when i flash to cyanogen i cannot send mms... im on boostmobile
im same as this ^^ guy
Naemion said:
Okay I may have a mms fix for boost, but it is in .cab format and I'm not sure how or if I can use it. any ideas will help.
Click to expand...
Click to collapse
Can you share your cab? I'd like to try and could prolly use it, since I'm running a Touch Pro2 WinMo 6.5 and XDAndroid. Thanks
Can someone please help me? I used the mm.myboostmobile.com and get a 'error-permanent-system failure' when getting receiving pic mail but could send. Also, my hubby who uses a Boost BB gets a blank message. So I used pcs-boost-mmsc-submit.sun3.lightsurf.net. and I was able to not send media mail but receive it without any problems. I have an energy ROM and using the Arcsoft MMS version you have above. This is so ridiculous. Do I have to use mms program specially for my Sense Energy CRX ROM or what? I do not understand what's wrong with this? Is it because I have an Energy ROM?
Text and picture message on BoostMobile
Text and picture messaging on BoostMobile is no longer working. Anyone out there has a fix for it?
"mm.myboostmobile.com" is no longer working.
kris33074 said:
Text and picture messaging on BoostMobile is no longer working. Anyone out there has a fix for it?
"mm.myboostmobile.com" is no longer working.
Click to expand...
Click to collapse
Just keep waiting and testing it out, it's not device specific it appears to be network and location specific, read more here: "http://www.howardforums.com/showthread.php/1721560-New-Boost-Mobile-MMS-Settings"
I haven't had a chance to dig my vogue out and try this, but I was thinking you guys might want to grap the mms.apk file from the shabbymod Rom for the Prevails and see if allows MMS texts to pass on through as normal.
http://androidforums.com/galaxy-prevail-all-things-root/350148-rom-acs-shabbymod-0-7-a.html
Just a thought.
Same Issue
lascott7 said:
Can someone please help me? I used the mm.myboostmobile.com and get a 'error-permanent-system failure' when getting receiving pic mail but could send. Also, my hubby who uses a Boost BB gets a blank message. So I used pcs-boost-mmsc-submit.sun3.lightsurf.net. and I was able to not send media mail but receive it without any problems. I have an energy ROM and using the Arcsoft MMS version you have above. This is so ridiculous. Do I have to use mms program specially for my Sense Energy CRX ROM or what? I do not understand what's wrong with this? Is it because I have an Energy ROM?
Click to expand...
Click to collapse
Did you ever find an answer? I am having the same issue