hi there! just tried to run WWE stock rom update but get invalid vender id error. Does anybody know how this can be solved?
You will need to CID unlock your phone before you can flash non-OEM ROMs. As far as I can tell from the Jade ROM Development thread, HardSPL does not yet exist for the Jade.
ok, thanks! Guess I'll have to wait another while for it then...
CID unlocking
hi, anybody around who has a tool / knows how to CID unlock a jade?
The device is pretty new and it takes time for someone to figure out a way.
Other hand, I dont think Olipro or other senior members would get this device just for CID, SIM unlocks and Hard SPL.
So maybe you guys may need to wait a little longer..
Regards,
Carty..
Related
Ok so I'm going to ask the dumb question (I have searched but can't find an answer). In the discussion on the general Wizard forum re BB Connect someone has it working using the TMo UK Ship ROM and the german BB Connect download. I have tried to install the UK Ship ROM from the downloads but it detects that my Wizard is a QTEK and not a TMo unit and refuses to install. Is there a way around this? Thanks in advance for any help you can give me.
I'm assumign the silence is because I have asked something incredibly stupid. Well, I've searched the Wiki, I've done quite a few ROm updates successfully to date, my device is unlocked and I can't find any anwser to my question. Hopefully one of you will take pity long enough to give me a response
:?
So I ran the CID unlock lokiwiz for the hell of it and still cannot install the ROM, get the message Invalid Vendor ID. Any posts I've found seem to suggest running lokiwiz to unlock the CID should solve this but I'm still not there - any suggestions?
only thing I can come up with is the cid unlock . . . but you seem to have tried that (followed all steps I suppose?). . .
i have CID unlock my phone i have put some cooked ROMs but i wanted to know why i cannot flash my phone to like a Hardspl i followed the instructions to unlock my device but can some one tell me if i need to do something else?
luis_valerio said:
i have CID unlock my phone i have put some cooked ROMs but i wanted to know why i cannot flash my phone to like a Hardspl i followed the instructions to unlock my device but can some one tell me if i need to do something else?
Click to expand...
Click to collapse
Use my tool (check signature) that has an option to read the CID status...
luis_valerio said:
i have CID unlock my phone i have put some cooked ROMs but i wanted to know why i cannot flash my phone to like a Hardspl i followed the instructions to unlock my device but can some one tell me if i need to do something else?
Click to expand...
Click to collapse
Is there a hard spl flash for the Wizard? I haven't been spending much time here but the only place I have seen Hard SPL is on the Hermes forums. If this is where you have seen it from you should NOT attempt to flash this to your Wizard they are more different internally than they are externally.
Zzan said:
Is there a hard spl flash for the Wizard? I haven't been spending much time here but the only place I have seen Hard SPL is on the Hermes forums. If this is where you have seen it from you should NOT attempt to flash this to your Wizard they are more different internally than they are externally.
Click to expand...
Click to collapse
Unfortunately there is no HardSPL nor SSPL for Wizard
When it came out first time i asked the developer to give me hints so that i could try to port it to Wizard and he said there was a team working on that...and that was months ago
So no, G4 devices can't be CID unlocked for free.
hi,
in a german forum i read, that only the cid unlocker which you had to pay for permanently gives you supercid status. now, i unlocked my trinity with the xda-developer version ''sspl'' for free, and want to restore the original condition, with locked cid, and original rom...
is this possible, and if it is, how?
kind regards, luki
ps: i used pofs method to unlock the trinity
Hi.
I'm searching for the same question and that's why I'm still on original WM5 ROM.
Mine is locked to Vodafone PT and I'm afraid to put another ROM like Dopod one, and if I got some problem, I don't know if it's possible to return the Trinity to the original state (CID) and send it back to waranty.
I keep an eye on this post and if you find some information, please put in here.
Good luck.
I don't think that you could CID locked your PPC !! But if it's just for going back to warranty...Often, they didn't see anything if you reinstall the original Rom ...
shym said:
I don't think that you could CID locked your PPC !! But if it's just for going back to warranty...Often, they didn't see anything if you reinstall the original Rom ...
Click to expand...
Click to collapse
Are only branded trinitys cid locked ? what is cid lock ?
CID = Customer Identity
I don't know exactly why CIDs exist but i think it has something to do with licenses and stuff like this.
And no, original HTC devices have a CID lock too.
But @ shym I think you shuold watch out for the CID bypasser, I'm pretty sure it doesn't unlock your phone but you will be able to flash other ROMs anyway...
That's exactly what I'm looking for.
A way to flash another ROM, like Dopod or coocked one, and if I don't like or need to go back to WM5, just put the operator (Vodafone) original ROM and returnt it to warranty, if is the case (hope not)
Don't want to risk my Trinity to loose the warranty if the service found the phone was CID unlocked or else.
i have a g3 wizard(dopod 838) at ipl/spl at 2.21.and so i thought its ok to flash Blackdiamond 3.1 at 2.XX.The whole process kept stuck at 99%.The wizard now only enters the bootloader screen.
then i read a guide that i need to flash t-mobile 2.26 first,my bad.Ok,downloaded it and tried to flash it, then i got the "ERROR [294] : INVALID VENDER ID"
cant flash to 2.26 and the ruu for bd kept stuck at 99% still.
im stuck here and kinda confused.How do i fix this?
and if its ok can any1 suggest me a rom with touchflo which is kinda lightweight or simple?
thanx in advance guys
to start off with the easy ?'s first...
was your wizard cid unlocked before you attempted to flash?
are you able to hard reset?
yep its cid unlocked coz i've used two diff telco on it.
previously on wm5 i can hard reset
zyulander said:
yep its cid unlocked coz i've used two diff telco on it.
Click to expand...
Click to collapse
CID and SIM unlocked are not the same thing. Just because you've used a different Telco (ie: SIM) means you are SIM unlocked. To flash a rom from a different Carrier or the custom roms found here, you have to be CID unlocked. Please see the How to Flash post that is stickied at the top of this forum and follow every single step.
oic.
im pretty sure its cid unlocked coz theres no carrier id such as cingular,at&t n such on it.n no carrier specific apps previously.
this theory makes sense rite?
zyulander said:
oic.
im pretty sure its cid unlocked coz theres no carrier id such as cingular,at&t n such on it.n no carrier specific apps previously.
this theory makes sense rite?
Click to expand...
Click to collapse
no not necessarily, i would follow the instructions in the topic suggested in the previous post (mfrazzz). paying close attention to section 3.6
zyulander said:
oic.
im pretty sure its cid unlocked coz theres no carrier id such as cingular,at&t n such on it.n no carrier specific apps previously.
this theory makes sense rite?
Click to expand...
Click to collapse
Just CID unlock it and quit guessing. The fact you got an invalid Vendor ID (stated in your first post) means you are still Carrier Locked. I'm trying to help, but if you think you know better, then feel free to go on your own. If you keep guessing and doing things like this, you are going to brick your phone. Either go back to the official rom that came with your phone, or follow the instructions THAT WILL WORK IF YOU DO EVERY STEP.
ok.ill do all the steps.thanks.
Simply to say, Hard SPL your device. That unlocks CID (country ID)
Regards,
Carty..
Hi
I have a HTC PM 200 from T Mobile. It has german language (win mobile 5) and I just want to update language from german to english.
I know that first of all I have to make a CID unlock. But because i have a AKU 2 SPL 2.06.0001 i can't make a CID unlock for this SPL. I read that I should try to do a CID unlock with lokiwiz03a. But this utlity (as far as I read) cannot make CID unlock ... just SIM unlock. Phone is already SIM unlock.
I tried even ''ROMUpdateUtility_Wizard_NoID.exe'' following detailed info from forum but in the end: Vendor ID Error.
So I'm stuck with german language.
Any help guys ?
Thx!
You dont need to CID unlock your device, you just need the NO_ID RUU to flash another WM5 rom. You can find it somewhere in the Charmer Upgrading forum. Good luck.
I used: ROMUpdateUtility_Wizard_NoID.exe and the message is:
Vendor ID error.
or
Invalid Vendor ID
For ROM I Used: RUU_Charmer_1120223_11202110_11220_T-MobileUK_Ship
Phone is put in Bootloader mode but after that error above appears.
And most of the links from Charmer forum are 2 years old and are ''dead''.
http://www.windowsceportal.hu/tartalom/programok/htc_charmer_upgradeut_noid.zip
This is what you need.