I have tried searching everywhere but i cannot find anyone with a similar problem.
I have an o2 XDA 2s which so far has been the best phone PDA i have used.
However, I have one small problem sometimes which happens about once in every ten calls i answer or dial, I cant hear anything the person on the other end is saying and they cant hear me too. However, I am able to make/recieve calls as normal if i do a soft reset which takes about 2 mins, rather irritating. Has anyone had a similar experience? Its just so fustrating when the phone is such a superb phone that this rather small problem happens.
Please can someone advise me on what the best thing to do is, I have tried a hard reset but this has not solved anythinga and the problem remains.
Should i try upgrade using the upgrades provided for the XDA 2S on the o2 site? i understand this flashes the ROM or something. Is this easy to do and is there a chance of doing worse damage when flashing? also my XDA which is an O2 phone is unlocked onto all networks, i.e. orange, tmobile, vodafone, does this mean if i flash the rom that i will lose the unlocked networks and be stuck on O2? I would be very grateful if someone could advise a newby as to how i could rectify this problem on what otherwise is a superb phone.
Thanks
riaz
I use 2 Blue Angels with 2 ROMs 2 versions at the same time,one is WM2003 radio 1.13 and the other is WM5 radio 1.15.Both face the same problems as yours.
After I uninstalled O2 Active user interface from both Blue Angels,that problem was fixed.
If you have O2 Active user interface installed,remove it and see if it is fixed or not.
:wink:
I've had the same issue on my Orange M2000. Apparently it's bluetooth related and a couple of ROM updates do actually improve it.
Re: XDA 2s
thanks for your response, how do i find if i have O2 Active user interface on my phone? or whether it is installed on my phone? and how do i remove it?
Im sorry i am a newbie so all this is new to me, but where theres a will theres a way!
Thanks
I don't think it's anything to do with the O2 software; the same problem affects Orange devices. Try updating with the official updates, if that doesn't work search the forum for "silent call" and you will hopefully find someone discussing which ROMs are the best for this issue.
Re: XDA 2s
rio1981 said:
thanks for your response, how do i find if i have O2 Active user interface on my phone? or whether it is installed on my phone? and how do i remove it?
Im sorry i am a newbie so all this is new to me, but where theres a will theres a way!
Thanks
Click to expand...
Click to collapse
1) What firmware are you using.
2) Do you use bluetooth or wired headset
2) Why is this so URGENT sounds like you've had the problem for a while.
mic/speaker
I permanently keep my bluetooth on which so far is working...
I have an XDA 2s
rom version 1.40.00WWe
Radio Version 1.15.00
I have not flashed or hard reset my phone asi thought it may make things worse!
Update with the O2 D/L...
As you have XDA IIs, and are on O2 why not update with the official update from O2? It'll upgrade your ROM and fix a couple of known issues with the PDA... I used this 'new' ROM for some time before flashing to WM5, and it worked flawlessy. even with the O2 Active installed (which is bloatware anyway!)...
You can find it here
Or you could flash with a base ROM and use a Cooked Ext ROM to get the apps you want, or take the plunge and get WM5!! It's all in the Wiki, and quite simple if you read a little
I've searched through the forum but can't seem to find any topics based on this question. Of recent months, I'm having terrible problems with;
- People finding it hard to hear me from time to time (as a result of me going 'very quiet'),
- Calls not ringing through (despite volume being turned up),
- Calls cutting off despite mid-signal levels which suddenly drop.
I'm guessing all these are faults with the Radio ROM. I'm currently using 02.07.10, any recommendations on what I should be upgrading too?
try each of these: 2.09.11, 2.40.11, 2.47.11, 2.61.11, 2.69.11, 2.71.11 to find best radio for your rom!
I am on O2 UK PAYG with my Wizard and I use radio rom 02.19.11. It works really well, and is the best I have found without other issues.
if you dont search....
First of all... search but now...
radio 2.19
http://rapidshare.com/files/84722422/T-Mobile-UK_2.19.11_Radio_Only.zip.html
radio 2.71
http://rapidshare.com/files/91064086/radio_2.71.rar.html
Because nobody said his own informatin...I will said it again this is just Radio upgrade but remember... you need to be CID/SIM unlocked before do anything stupid ok?
See you soon tell us what does it works for you ok?
See you soon!
My Vario III suddenly stops recording sound properly via the built in
microphone. If I make a call when this is happening the other person cannot hear me or sound quality is very poor and if I use htc voice-recorder the sound seems very far away with occasional loud distortion. If I plug in my external headphones and use that mic the sound is absolutely fine.
This problem seems to just appear and then can just go. A soft reset makes no difference. A hard reset or flashing the radio or rom has, so far, always solved the problem - until it happens again which could be in a few hours, days or even weeks.
I can't link the problem to any particular software that runs.
I've tried flashing several different radios. I still get exactly the same problem. My local repairer says it won't be the mic as they either break or they work - not coming and going as I have.
Has anyone any suggestions for what I could try to fix this? Suspect software? Should I just keeping working my way through new radio roms? Do you think it is actually the mic in the phone?
I can't find quite this problem described anywhere else so your help would be very much appreciated. Many thanks.
Currently
Dutty's WM6.1 WWE
Radio 1.70.18.02
Protocol 25.83.40.02W
Originally: (when problem started)
Rom 1.56.110.4 (T-mobile UK?)
Radio 1.27.12.32
birminghamuk said:
My local repairer says it won't be the mic as they either break or they work - not coming and going as I have.
Click to expand...
Click to collapse
Then go see somewhere else, they're not reliable...
A bad contact causing an intermittent failure is one of the most common problems in electronic devices...
I'm having the exact same problem on my Vodafone V1615. Funny thing is, my radio ROM was the same as yours when the problems began. I waited till the Vodafone V1615 WM 6.1 ROM update, and installed it. It worked, for a few weeks, and then the problem returned. Vodafone does not want to fix it for me
Hello tha_bulldog
When your mic stops working have you found a reliable way to get it working again?
Long shot but does this thread help??? The problem was the way the user holds the phone, covering the mic with their hand.
http://forum.xda-developers.com/showthread.php?t=360271
Occasionally I have a problem where when making or receiving calls I pick up and there is no sound. If I Soft Reset I can make the call and it works fine. It's been starting to happen more often recently, and is really bugging me. It happens both when I'm using the phone speaker, and my headset.
what rom are you using? I have noticed the same thing the last couple of days since upgrading to L26 M2D v1
ah, here it is the same thread.
I use WM 6.1 htc version
Is there no bugfix?
Have you tried flashing a new radio?
Ta
Dave
data at info:
ROM: 3.28.407.0 GER
funkempfänger (i guess it's the radio): 1.65.16.25
protocoll: 25.83.40.02H
it was updated with the new htc 6.1 version what i've heard.
or can i downgrade it to a version that is working fine? when yes, where is the file to do so..
Right now I'm using Radio 1.58.16.27, I'll try another one, which do you recommend?
I was using 1.65.29.22, switched to 1.65.24.36 (I was using this with L26 diamond V12 with no issues)
had the same issue today.
hm, looks like a big upcoming problem for everyone...
what roms does everyone have? any "recently added" apps or changes?
ill start
L26_KaiserTouch_V1_M2D
NETCF 3.5
HTC AudioManager_2_0_1819_2129
Opal stuff
virusv69 said:
what roms does everyone have? any "recently added" apps or changes?
ill start
L26_KaiserTouch_V1_M2D
NETCF 3.5
HTC AudioManager_2_0_1819_2129
Opal stuff
Click to expand...
Click to collapse
Old thread but still, I've been experiencing this issue on the Hyperdragon series of ROMs from late October. Also had this problem in the past on some of Dutty's roms. The latest Raphael version (15/11/2008) has not exhibited this problem in 4 days. Only difference I can see is a slightly newer version of MSVC (1.6.19965).
Cheers.
gatewayer said:
hm, looks like a big upcoming problem for everyone...
Click to expand...
Click to collapse
I am getting the same problem intermittently, with a soft reset as the solution.
I am running a bone stock AT$T rom,recently upgraded to 6.1. It started happening post upgrade.
An upgrade problem?
same here... im playing around with different radios, it has to be a radio issue imo
I would just love to have this issue solved. It's not new whatch here; http://forum.xda-developers.com/showthread.php?t=383539
Peregrine
1stPeregrine said:
I would just love to have this issue solved. It's not new whatch here; http://forum.xda-developers.com/showthread.php?t=383539
Peregrine
Click to expand...
Click to collapse
My phone rings and notifies just fine when Texts,emails and calls come in. It answers just fine, but there is no sound. Then when I try to call people back, there is no dial sound and the call appears to not go through, until I do a soft reset, then all is back to normal.....................for a while.......................
I'm having this issue also. The other party can hear me when I answer, but I can't hear anything after the initial incoming-call ringing. A power-cycle restores normal operation but only for a while.
ROM: 3.28.405.0 WWE, 05/02/2008
Radio: 1.71.09.01
Protocol: 25.75.40.02.eMo
I'm in same boat as everyone else here.
Sometimes my phones rings, but when I answer I have no sound and other party can't hear me. Other times, my phone doesn't ring and all audio is muted (despite volume on). Soft reset is the only thing that works for me.
I gotta say this is really pissing me off. I'm missing lots of important calls because my phone doesn't ring when it should, or if I'm lucky it rings but has no audio so I have to soft-reset and wait 5 minutes for my phone to reboot & re-establish signal all whilst my clients are trying repeatedly to call me.
I'm willing to try other radios, but no one seems to have any working suggestions.
Thought maybe it was software, since I don't remember this happening after my initial WM6.1 upgrade. Uninstalling S2U2 didn't work (happened again today). Just uninstalled Voice Command, too, but haven't tested yet. VC's been flaky since upgrading to 6.1, working sometimes, failing to announce calls other times, plus occasional VC crashes at boot claiming "out of memory" which is blatantly untrue.
Just out of curiousity, is everyone with this problem using Voice Command, or just some of us?
Think I might have to go back to WM 6.0 since 6.1 didn't solve my Bluetooth issues plus screwed up Destinator...oh well. Schap's WM6 4.31 was best ROM anyway.
Anyone having any luck with this problem?
Like I said, I was running AT$T WM6 with no issues. The I updated to WM6.1 and started having these call issues.
Last week I flashed to HD III still no joy. SJ says that he is running the same radio as me, 1.65.24.36 with no problems.
Is it " my " phone? Microsuck 6.1 ? The radio ? Has anyone solved this with a new radio flash ?
I run a business on this phone and it is getting really frustrating, I don't want to go back to 6.0 just so I can get my phone calls?
I'm not just whining, looking for sucess stories.
Hi, havent been here in a while but i thought i'd add to the list. I have recently flashed HD3 (one of the early november editions) and it was without problems until friday when i dropped my fone. Ever since then i have had the intermittent sound in call which is only fixed by a soft reset (exactly the same as denco7). I haven't changed the radio since dutty's 1st diamond rom (a while ago) as i haven't had any problems but now im thinking about it.
Current setup (from device info):
ROM version: HD_III_Jade WWE
ROM date: 09/30/08
Radio version: 1.65.24.36
Protocol version: 25.94.40.06H
Not using MSVC
Recently flashed to HD III Blackstone hoping this might work but still having the problem.
I also flashed radios 1.65.24.36 and 1.70.18.02
and now I am running 1.70.19.09....... and it is still happening. It has got to be something in WM 6.1. Cannot be a software conflict, because it was happening when I was running bone stock AT$T 6.1 upgrade with no software add ons.
Again, I would hate to think that I have to downgrade to 6.0 just to get my phone calls.
Damn WM6.1 sound!
Well, I thought I'd let everyone know that I've uninstalled all my favorite apps from my Kaiser. No MSVC, no S2U2, occasional hands-free Bluetooth, and no A2DP. In that time, I've had only 2 incidents of no sound for the last 3 weeks--much better than no sound every few days or even several times a day. Don't know that the apps have anything to do with it since denco7 had same problem on an unadulterated AT&T ROM.
The big question is why do we all have the same sound problem but most WM6.1 Kaiser users do not (if everyone did I'm sure there would be a lot more *****ing). If we could reproduce it at will, we'd at least have something to focus on. Not knowing that, I'll have to guess and say that I suspect one or more of the following:
WM6.1 and/or the 1.65+ radios required for WM6.1 introduced some sound bug (deadlock, dereferenced pointer, etc.). The more apps that interact with sound and/or the radio, the more likely the bug will be triggered. But even if this is true, why does it happen to us but not to others?
The bug exists only in a particular base ROM source used by the ROM cookers. Still, should be affecting more people.
Maybe people who customize their phones are more likely to reset and clear any conditions that lead to no sound? Doesn't seem likely, but hey...
The problem exists only in specific Kaiser versions, perhaps even in conjunction with only specific WM6.1 builds and/or radios. I think there's been 5+ different hardware versions of the Kaiser line, but I can't find where I read this or how to tell what version your Kaiser is.
Bluetooth affecting sound? Got absolutely nothing to back this up other than WM6.1 supposedly fixed a lot of Bluetooth problems and during the time of my frequent lockups, I was using A2DP to stream an audiobook to my car's Parrot MK6000. Finished the audiobook & quit traveling so much, so I rarely used Bluetooth during the last few weeks when I've had only 2 no sound incidents. BTW, I upgraded to WM6.1 specifically because of the Bluetooth fixes, hoping they fixed the 100% CPU usage after finishing a hands-free call and fixed the A2DP dropping after calls. WM6.1 didn't fix either, so what did they do? Maybe their "fixes" just introduced new problems?
Possible dead zone f'ing up the radio and consequently sound? I offer this only because when I was working in a particular dead zone I had frequent sound problems. For some reason, my phone has problems reconnecting after leaving this dead zone and I have to reboot. Occasionally it would reconnect without rebooting, but I never correlated this to no sound. However, I haven't been there in weeks, and my problems with sound decreased (although I also uninstalled apps & quit using Bluetooth as much). Went there last Friday, and while I was there I found I had no Windows sounds. Could dead zones or even just temporary signal loss be f'ing up the radio and consequently the sound?
These are all just guesses--I'm just throwing out some possibilities so we can find something in common between us. However, I gotta say that if I don't find a solution soon, I'm going to switch back to WM6. Threaded messages are nice, but they're not worth this no sound headache.
BTW, I'm using:
AT&T Tilt (purchased within a month of initial release)
ROMeOS v4.21.1 (OS v5.2.20273, AKU 1.3.3)
Radio 1.71.09.01
Hello everyone,
I have done a ton of google searches and spent about an hour reading through threads of people with similar problems. I have flashed a few roms and different spl/radios etc. Nothing seems to fix the problem.. Nor have I seen anyone in a post had their problem fixed either - they were just criticized and told to search the forums or read a generic faq on flashing radios..
Anyways, after reading all that and trying a few different radios nothing seems to help.
My device, while connected to 3G, can usually make 1 call when it first connects, then each call thereafter will fail with a beep beep beep.
I am running 3.29.Hard spl
Rom Version TPC_V10_MEGA WWE
Radio Version 1.70.18.02
Protocol Version 25.83.40.02W
Has anyone found a successful combination to correct their issues with the 3g network and their tilt? If you have no issues and have the same phone please post your build.
I have flashed from original roms and a few diff radios to no avail .
I really want my damned 3g to work.. and no I dont want to just manually switch to EDGE (which is what I have my phone forced on now).
Thanks in advance.
same here
I have had the same issue. The phone will show H or 3G and you cannot make a call. I have just accepted using the edge system to keep the phone working fine. The only thing you loose is the faster internet speed the phone otherwise works fine. I have assumed that I dropped the phone and something happened to the antenna. I contacted HTC about the issue and they say it is a hardware issue even though I have seen many speak of the same issue. I have the tilt.
I thought I did the same thing until I started searching and see that there are numerous people with the same issue.
I will just be patient and wait until a new winmobile phone comes out with a oversized screen! Hope the next xperia is that
Radio Issue
I had the same problem with that radio. I changed back to the 1.65 radio and everything worked properly again. I hope this helps.
See my sig for what I am running. I have run TPC's roms as well as others and almost every 6.1 compatible radio there is and have never encountered that problem.
Have you tried to go back to stock everything, rom radio and spl to see if that makes the difference ?