I flash this rom eOS 4.888.FiRe (Fina) and didn't like it. Then try to flash many different rom but it give me this message: Error [240]: File open
The update utility can not open the requested file. Please check your update utility.
I turn off firewall, active sysc is good. Please help?
Hi,
I'm trying to install nameless-4.4.4-20141108-p5wifi-HOMEMADE-f2fs.zip but I get the following error message from twrp 2.7.1.0
E:Error executing updater binary in zip '/sdcard/nameless-4.4.4-20141108-p5wifi-HOMEMADE-f2fs.zip'
I downloaded it again, with the same result. I can open the zipfile in windows explorer, so I guess it's not broken.
I can install LS-KK-MileStone-3.2-p5wifi-system-cache-f2fs.zip without any problems.
Anyone any ideas of what might be going wrong with the nameless-zip and how to fix it?
Thanx a lot,
Guenther
I was able to reach the bootloader & TWRP, when trying the flash a OTA i get the following error:
This device has lge/omni_bass/bass: 5.0.2/LRXS22g/3 : eng/test-keys.
Does my watch has the worng name and causing the fell the Build.prop scan?
OP please close this thread.
Hello to all. Sorry for my English, I do not speak it very well. I have a p8 lite 2017 and I'm trying to flash a stock firmware downloaded from firmware finder. My problem is this: when I try to flash 2 of the 3 files (update.zip, full.zip), the twrp gives me an error and in particular
Updating partition details ....
........ done
Full SELinux support is present.
MTP Enabled
Installing zip file '/external_sd/update.zip'
Cheking for MD5 file found .....
Skipping MD5 check: no MD5 file found
mountencrypt: failed to mount / data: No such file or directory
Removing unneeded files ...
Removing empty directorys ....
add link type file ...
write radio image ...
check_write_data_to_partition, write data error
E: UNKNOWN COMMAND (ERRNO) (in red)
update_huawei_pkg_from_ota_zip: update package from zip failed
UPDATER PROCESS ENDED WITH ERROR: 7
ERROR INSTALLING ZIP FILE '/EXTERNAL_SD/UPDATE.ZIP' (in red)
Updating partition details ....
..... done
I can not solve the problem. I also changed twrp, but nothing has changed.
At the moment I can not turn on the phone because it is stopped on the screen "your device is booting ..."
I hope you can help me, I'm going crazy.
thank you so much
alex'82 said:
Hello to all. Sorry for my English, I do not speak it very well. I have a p8 lite 2017 and I'm trying to flash a stock firmware downloaded from firmware finder. My problem is this: when I try to flash 2 of the 3 files (update.zip, full.zip), the twrp gives me an error and in particular
Updating partition details ....
........ done
Full SELinux support is present.
MTP Enabled
Installing zip file '/external_sd/update.zip'
Cheking for MD5 file found .....
Skipping MD5 check: no MD5 file found
mountencrypt: failed to mount / data: No such file or directory
Removing unneeded files ...
Removing empty directorys ....
add link type file ...
write radio image ...
check_write_data_to_partition, write data error
E: UNKNOWN COMMAND (ERRNO) (in red)
update_huawei_pkg_from_ota_zip: update package from zip failed
UPDATER PROCESS ENDED WITH ERROR: 7
ERROR INSTALLING ZIP FILE '/EXTERNAL_SD/UPDATE.ZIP' (in red)
Updating partition details ....
..... done
I can not solve the problem. I also changed twrp, but nothing has changed.
At the moment I can not turn on the phone because it is stopped on the screen "your device is booting ..."
I hope you can help me, I'm going crazy.
thank you so much
Click to expand...
Click to collapse
After having a soft-brick I followed this instructions:
https://forum.xda-developers.com/p8...ck-rom-huawei-prague-pra-xxxc432b182-t3727816
My phone is running without problems
Hi, the other day I unlocked the bootloader of my Z3 Play, yesterday I got a notification for a new update, the January Security Patch or "OPWS28.70-56-8". I managed to get the update file looking for the URL in the logcat. When I downloaded this file I manually added ".zip" because it had no extension. And I followed all the steps in order to get this OTA using the stock Recovery.
I type "adb sideload ota.zip" and I get stuck because of an error, it suddenly stops in the first step at 47%, in the command prompt I get "Total xfer 1.01x" and on my device, on the Recovery menu it reads:
"Error applying update: 20 (ErrorCode::kDownloadStateInitializationError)
E: Error in /sideload/package.zip (Status 1)
E: Failed to open driver control: No such file or directory
Installation aborted"
I can use my Z3 without problems, is not bricked. But It would be nice if someone could tell me what I am doing wrong.
In any case, here it is the relevant info:
Model XT1929-6 (LATAM)
Software version: Blur_Version.28.231.6.beckham.ret
Carrier: attmx
Lewerosky said:
Hi, the other day I unlocked the bootloader of my Z3 Play, yesterday I got a notification for a new update, the January Security Patch or "OPWS28.70-56-8". I managed to get the update file looking for the URL in the logcat. When I downloaded this file I manually added ".zip" because it had no extension. And I followed all the steps in order to get this OTA using the stock Recovery.
I type "adb sideload ota.zip" and I get stuck because of an error, it suddenly stops in the first step at 47%, in the command prompt I get "Total xfer 1.01x" and on my device, on the Recovery menu it reads:
"Error applying update: 20 (ErrorCode::kDownloadStateInitializationError)
E: Error in /sideload/package.zip (Status 1)
E: Failed to open driver control: No such file or directory
Installation aborted"
I can use my Z3 without problems, is not bricked. But It would be nice if someone could tell me what I am doing wrong.
In any case, here it is the relevant info:
Model XT1929-6 (LATAM)
Software version: Blur_Version.28.231.6.beckham.ret
Carrier: attmx
Click to expand...
Click to collapse
i never got the updat notification so i manuelly flash the bootloader and everything to be honest if you want i can upload the folder with litterally everything you need including my homemade batch file to do all the work for you haha
hello
can you provide the update file zip?
Lewerosky said:
Hi, the other day I unlocked the bootloader of my Z3 Play, yesterday I got a notification for a new update, the January Security Patch or "OPWS28.70-56-8". I managed to get the update file looking for the URL in the logcat. When I downloaded this file I manually added ".zip" because it had no extension. And I followed all the steps in order to get this OTA using the stock Recovery.
I type "adb sideload ota.zip" and I get stuck because of an error, it suddenly stops in the first step at 47%, in the command prompt I get "Total xfer 1.01x" and on my device, on the Recovery menu it reads:
"Error applying update: 20 (ErrorCode::kDownloadStateInitializationError)
E: Error in /sideload/package.zip (Status 1)
E: Failed to open driver control: No such file or directory
Installation aborted"
I can use my Z3 without problems, is not bricked. But It would be nice if someone could tell me what I am doing wrong.
In any case, here it is the relevant info:
Model XT1929-6 (LATAM)
Software version: Blur_Version.28.231.6.beckham.ret
Carrier: attmx
Click to expand...
Click to collapse
Motorola XT1929-6 Your Phone Has loaded Diferent operating system. Help!
The phone was purchased at AT & T Mexico. When you start, your phone has been loaded with another system. please help. Software 9.0. ATTMX carrier
Model XT1929-6. Single sim, 64GB Storage 4GB Ram