Hi,
Tried using the search function here but nothing came up in the X1 forums. I have been thinking about getting the X1 but given my normal needs, I need access to two numbers during the day.
Is anyone already using a dual sim adapter (cut or uncut version) or knows of a reliable one for the X1?
Thank
Hi
I just ordered one the other day. When I get it i'll report if its any good or not!
Nigel
veletron said:
Hi
I just ordered one the other day. When I get it i'll report if its any good or not!
Nigel
Click to expand...
Click to collapse
How do you plug it?
You must remove the battery cover.
Hi
I think its the usual "saw up your sim cards" job, then fit the important bits into a holder thats the same size as a normal sim, then stick this in the sim slot.
For the most part switching between sims involves powering off/on the phone. I did have one in the distant past that would swap sims when you set it to flight mode then back out again.
We shall see, it was only £6 quid iirc.
Nigel
veletron said:
Hi
I think its the usual "saw up your sim cards" job, then fit the important bits into a holder thats the same size as a normal sim, then stick this in the sim slot.
For the most part switching between sims involves powering off/on the phone. I did have one in the distant past that would swap sims when you set it to flight mode then back out again.
We shall see, it was only £6 quid iirc.
Nigel
Click to expand...
Click to collapse
The dual sims also have phone numbers to switch sim.
Ps. could you share link. I also wanna buy a good one.
please tell us of the HSDPA works with the dial sim card thing because most of the time only 3G is supported
Any news?????
So what happened?
Anyone know if there are adaptors which will always use one SIM card unless told otherwise (rather than switch when power-off)? Ta.
i guess no updates on this but i did see this:
http://www.simore.ch/video.php?docid=961068269296981089
Do dual sims work in the X1?
I'm using the dualsim adapter of simore in my xperia
switching from sim1 (vodafone) to sim2 (simyo/eplus) works realy fine - it durate max 15 seconds
but switching back to sim1 making sometimes trouble...so that i has to softreset the phone
i dont know if that is a global problem with the xperia and the simore adapter or if somethin is damaged in the simcards/adapter?!
additional i have to change the sms service number after changing the simcards...
has someone problems with that too? or a better solution?
sorry for bad english O
Simore
Yeh, Simore are meant to be the best, I was looking to get one also but for the good Simore one you are looking at paying 70euros which is far too much.
Unfortunately, the design of the Xperia means it is only possible to use Sim Adapters that chop the sim card to pieces and fit them in the size of 1 sim.
Edit: http://www.simore.ch/en/mobile_phone_accessory/Sony-Ericsson/Xperia-X1.html
Curious to know if that works on Kaiser. They are charging exorbitantly high. wish to know if there are any other reliable agencies offering same service. Cheers.
I ordered few different models from eBay but either of them didint work. If someone succeeds on this please report.
I had an older dual-SIM adaptor that I've been using for the last couple of years. I tried it in the X1 and it worked okay (flight mode to switch). The problem was that it didn't support any 3G at all, so in a 3G area it was constantly attempting to get a 3G lock, dropping the signal, then trying to get a lock again. In the end I had to disable HSDPA.
Then I got a new SIM from O2. I just put the SIM in directly without the adaptor. BLAM! Better signal and HSDPA access. So I've been on the lookout for another adaptor that still allows for switching but supports HSDPA. I keep ending up at simore.ch as well and wonder if their "Black 1" is up to the task. I don't want to pay out €40 just to see if it works though... I need to hear from someone else who has bought one and used it for HSDPA access.
So the question is who will bell the cat. None of us are eager to try it out. So would like someone with his experience to come over here & let others know if it was a success or not. I am interested in kaiser utility.Cheers
i have to disable hsdpa and umts while using my simore black1 adapter...if hsdpa is enabled the connection always broke down
it show the symbol that the signal is good and after 30-60seconds my xperia search for signal...endlessly...
i dont know if that is a problem with one of my sims (but without the sim adapter they both connect to hsdpa) or if that is a problem of simore
i think the last one
It's the sim adaptor.
My old one does EXACTLY the same thing. It attempts to get a H or 3G lock, then loses the signal and recycles back again. It sounds like simore are just the same as the £6 one that I got from eBay 2-3 years ago.
I just cannot understand why it's so problematic to build a sort of cartridge (like those dual-SIM adapters) with two EEPROM of Flash elements inside and sell it together with a USB SIM reader-writer?
So any basic user could copy his/her two SIMs to this cartridge and skip all the mess with improper cutting and loosing two SIMs?
AFAIK any SIM could be fully read. Why it cannot be simply copied?
I've got very cheap dual sim adaptor (11th generation) and it fully works in new itje's ROM. I also copied STK from this ROM to memory card and tried it in older itje's ROM Touck-It 4.0 RC1.1 I could connect to internet via HSDPA and simply switch SIMs, so you don't need too expensive SIMORE adaptor.
Edit: I have tested internet connection short time and I didn't have signal lost, I'm out of credit right now but I will report more after I'll top-up and do more tests.
(sorry for my poor english)
Related
Okay people....I got a question, I was looking on eBay for a Dual Sim adaptor, but got crazy to see what is available, are there people here that have experience with Dual Sim Adaptors?
Few things that are important for me:
- I dont mind cutting my Sim Card(s)
- I dont want a "bulb" under the batterycase, so the cutting sim Dual adaptors seem to fit my needs!
- I like the Auto TSK Menu
- I hear stories about Dual Sim Adaptors that dont use the Radio ON/OFF function to swtich Sim Cards....I LIKE THIS!
I also would like to use a Today Plugin to switch sims, or at least see the Active Sim Card, I tested Wivit Sim Status Switcher but it works buggy on WM5 (and WM6), this is because it is actually for WM2003 I think...
Who can give me some feedback here on Dual Sim Adaptors that are used with success on the Wizard and even maybe pass me some screenshots off the menu used to switch the sim cards?
And yeah....offcourse I searched and read the topics here on XDA Dev, but cannot come to a good conclusion of which Adaptor I should buy!
Here are some links of adaptors that will fit my needs (I think....) The first link seems to be the best buy (and cheapest option).
http://cgi.ebay.nl/Ghost-Dual-Twin-...ryZ48501QQrdZ1QQcmdZViewItem#ebayphotohosting
http://cgi.ebay.nl/Dual-Twin-Dual-S...ameZWDVWQQrdZ1QQcmdZViewItem#ebayphotohosting
http://cgi.ebay.nl/Dual-Sim-10th-Ge...sPageNameZWD2VQQcmdZViewItem#ebayphotohosting
http://www.simore.ch/en/two_sim_cards_in_one_mobile/dual_sim_card_black_1.php
Thanks guys!
Molski
Hi Molski,
I have been using a dual sim adapter for over a year now and I never had any problems. I bought a 9th generation adapter from some chinese manufacturar through ebay and had to cut my SIMS. Cutting is b.t.w. the only way to use two SIMS without "bulbing" the batterycase.
I also bought a 12th generation adapter, and often the second time I switched the STK would hang, resulting in having to softreset.
I have no knowledge with switching without turning off and back on the radio, imho it wouldn't be possible, your phone *needs* to reregister and takein information from the new provider.
I switch using a script (mortscript) by hand and automatic when starting programs like TomTom.
Forwarding from one SIM to the other *only* when unavailable make both your cellphone number reachable at al times.
Screenshots of the menu's is kinda useless; the menus are dictated by the SIM adapter, so every brand will have its own specific menu. Mine (and most from what I have seen) simply offer three options; switch to SIM1, to SIM 2 and edit the 'names' of the two SIMS.
Cheers,
Cacti
b.t.w. Sim cutter kopen voor weinig?
le_cactus said:
b.t.w. Sim cutter kopen voor weinig?
Click to expand...
Click to collapse
Die heb ik al....die het bij mij schaar
Of ik gebruik zo´n scherp chirurgenscalpel, daarmee kom je overal doorheen.
Thanks voor je info!
Molski
i suggest to use the analog one (switching by turning off/on radio) as they consume less power and its as fast to switch as with the menu of the digital ones (actually faster - just one key press - if u use a today plugin as SIMName - works on WM6, I am using it - also shows the active card, you can set a name for every SIM, so it even shows the correct name and not just the provider if u use two cards of the same provider! )...
i am using dual sim with cutted cards and.. im quite happy but battery drains a lot faster (about 40%!) so when i need long time battery use i am using adaptor for cutted sim. to change cards i'm using batterystatus (when i tap on providers name its run stk service) and its work fine.
but now im thinking about some less battery draining idea...
sorry for my english
slimag said:
i am using dual sim with cutted cards and.. im quite happy but battery drains a lot faster (about 40%!) so when i need long time battery use i am using adaptor for cutted sim. to change cards i'm using batterystatus (when i tap on providers name its run stk service) and its work fine.
but now im thinking about some less battery draining idea...
sorry for my english
Click to expand...
Click to collapse
cool....I use BatteryStatus everyday, so this wil be perfect to enter the STK menu...hopefully tha developer can also built a change sim option in the plugin ;-)
DoctorT said:
i suggest to use the analog one (switching by turning off/on radio) as they consume less power and its as fast to switch as with the menu of the digital ones (actually faster - just one key press - if u use a today plugin as SIMName - works on WM6, I am using it - also shows the active card, you can set a name for every SIM, so it even shows the correct name and not just the provider if u use two cards of the same provider! )...
Click to expand...
Click to collapse
SIMName looks like a very cool tool....gonna check it right now, although I still use only 1 sim card
molski said:
SIMName looks like a very cool tool....gonna check it right now, although I still use only 1 sim card
Click to expand...
Click to collapse
the only issue i have is that is sometimes doesn't show anything on the today screen - waiting for a few seconds or switching to landscape and back solves it (it's not made for WM6, not even WM5 but anyways works well enough for me)...
BTW, i think it is just available in german, but as there is not much to configure u won't have any problems...
maybey it's a stupid question but is it possible to run 2 sim's at the same time? cause I have a ''work sim'' and a ''private sim'' and I do not want to miss call's on both sim's and I also don't like carrying around 2 phones ...
so is it possible??
thnx...
le_cactus said:
Hi Molski,
I have been using a dual sim adapter for over a year now and I never had any problems. I bought a 9th generation adapter from some chinese manufacturar through ebay and had to cut my SIMS. Cutting is b.t.w. the only way to use two SIMS without "bulbing" the batterycase.
I also bought a 12th generation adapter, and often the second time I switched the STK would hang, resulting in having to softreset.
I have no knowledge with switching without turning off and back on the radio, imho it wouldn't be possible, your phone *needs* to reregister and takein information from the new provider.
I switch using a script (mortscript) by hand and automatic when starting programs like TomTom.
Forwarding from one SIM to the other *only* when unavailable make both your cellphone number reachable at al times.
Screenshots of the menu's is kinda useless; the menus are dictated by the SIM adapter, so every brand will have its own specific menu. Mine (and most from what I have seen) simply offer three options; switch to SIM1, to SIM 2 and edit the 'names' of the two SIMS.
Cheers,
Cacti
b.t.w. Sim cutter kopen voor weinig?
Click to expand...
Click to collapse
Hi le_cactus,
Could you post the script you're using? How do you switch automatic?
cheers,
Herlek
I have a work SIM and a private SIM and really do not want to carry two phones around. In my previous two models of regular (not-smart) phones I used one of those dualsim cards where you cut our the center of each sim and slip them into a new sim card with some extra electronics on it. You can then switch between the sims with a couple of key presses or even at automatic time intervals. eg. http://duosim.com/
OK, so I have two different makes of this type of dual-sim card and tried each one in the 750. The switching program shows up in the phones menu and it looks like it is going to work but it does not. When you try to switch to the second sim, the phone switches off and back on, but the the phone is still using the first sim.
I really want to find a way to get this to work. I have ordered one of those multi-sim card cloners (same link as above), in the hope that will work differently.
Has anyone found a solution to this ? Either a particular make of dual-sim or multi-sim cloner that works or maybe a tweak to get past the above mentioned problem ?
gajsler said:
I have a work SIM and a private SIM and really do not want to carry two phones around. In my previous two models of regular (not-smart) phones I used one of those dualsim cards where you cut our the center of each sim and slip them into a new sim card with some extra electronics on it. You can then switch between the sims with a couple of key presses or even at automatic time intervals. eg. http://duosim.com/
OK, so I have two different makes of this type of dual-sim card and tried each one in the 750. The switching program shows up in the phones menu and it looks like it is going to work but it does not. When you try to switch to the second sim, the phone switches off and back on, but the the phone is still using the first sim.
I really want to find a way to get this to work. I have ordered one of those multi-sim card cloners (same link as above), in the hope that will work differently.
Has anyone found a solution to this ? Either a particular make of dual-sim or multi-sim cloner that works or maybe a tweak to get past the above mentioned problem ?
Click to expand...
Click to collapse
Hi gajsler,
I found myself being in the same situation: Want to use both office and private Sims with my Treo.
After some research I can say that it depends mostly on the combination of SIMs you are using. If you are using any UMTS/3G SIMs then a digital DualSim-application wouldn't do trick, especially if you are using a H3G-SIM (Hutchison 3G).
You will need an analog DualSim-holder for these SIMs.
I've got one from HongKong (Ghost SIM, no cutting) but it doesn't work correctly. Only the first SIM card is being used ... don't know how to get past this issue.
Seems to be tricky. Will post any additional experiences.
Greetz,
TreMax
gajsler said:
I have a work SIM and a private SIM and really do not want to carry two phones around. In my previous two models of regular (not-smart) phones I used one of those dualsim cards where you cut our the center of each sim and slip them into a new sim card with some extra electronics on it. You can then switch between the sims with a couple of key presses or even at automatic time intervals. eg. http://duosim.com/
OK, so I have two different makes of this type of dual-sim card and tried each one in the 750. The switching program shows up in the phones menu and it looks like it is going to work but it does not. When you try to switch to the second sim, the phone switches off and back on, but the the phone is still using the first sim.
I really want to find a way to get this to work. I have ordered one of those multi-sim card cloners (same link as above), in the hope that will work differently.
Has anyone found a solution to this ? Either a particular make of dual-sim or multi-sim cloner that works or maybe a tweak to get past the above mentioned problem ?
Click to expand...
Click to collapse
I'm using Simore Gold 2 and it works perpect.
Does anyone know if there is a way to use two sim cards at the same time in the Kaiser ? I know that an adapter exist but I don't know if it would fit in the Kaiser ...
Thanks !
If you know more. Please share it with us.
Have you actually seen the sim card holder on a kaiser? its small and only room for one sim (even if you have ribbon cable from it to a 2 sim splitter) the lock mechanism stops any cable coming out so it would have to double back on the sim and come out the side and the side of the sim cover would need shaving to allow that and then on the back the form is moulded for the clearance of the keyboard so even if you stuck it to the back of the screen you will end up snagging it when opening and closing the keyboard.
if someone makes one that works then I will gladly take back what i said above however don't hold your breath.
Russ
I had a ghost Dual SIM adapter for my O2 XDA Exec & needed to cut each SIM down and place in a special Dual SIM holder which was the size of a single SIM. It worked fine, but I haven't had the nerve to cut up another couple of SIMs now that I've got a new T-Mobile VARIO III
weasel said:
I had a ghost Dual SIM adapter for my O2 XDA Exec & needed to cut each SIM down and place in a special Dual SIM holder which was the size of a single SIM. It worked fine, but I haven't had the nerve to cut up another couple of SIMs now that I've got a new T-Mobile VARIO III
Click to expand...
Click to collapse
Did that really work? The Kaiser just doesn't support dual SIM(IMHO).
Do you have to switch, or can you be called on 2 SIM's at the same time?
And how do you define the SIM to make the outgoing call?
I'm interested!
Yes, the ghost Dual SIM adapter seems interesting ...
Dual sims
I use them for thre last two years and stopped as they are a battery drain on the phones.
-No you cannot use them at the same time, you need to flick one on and off.
-Handy but not worth battery drain
Network operators may create a service where two numbers (from the same operator) are active on one sim. Perhaps this is not the ideal solution but workable. I believe that TIM and/or Vodafone in Italy (although I'm not from there) provide such a service.
leon100 said:
Network operators may create a service where two numbers (from the same operator) are active on one sim. Perhaps this is not the ideal solution but workable. I believe that TIM and/or Vodafone in Italy (although I'm not from there) provide such a service.
Click to expand...
Click to collapse
Orange in the UK provide this service. By pressing the # it switches froms one line to the other to make calls. Calls/SMS can be received on either line regardless of which line is selected for outgoing calls
I have a analogue dual-sim-adapter from http://www.hot-wire-telekom.de working in my Kaiser.
It's working fine with one problem: The operator names are not shown right. The problem was also known with the Artemis, but solvable by a registry change. This change is not working on the Kaiser, because the needed registry key is not present.
Does anyone have a solvation for that?
BiasX said:
I have a analogue dual-sim-adapter from http://www.hot-wire-telekom.de working in my Kaiser.
It's working fine with one problem: The operator names are not shown right. The problem was also known with the Artemis, but solvable by a registry change. This change is not working on the Kaiser, because the needed registry key is not present.
Does anyone have a solvation for that?
Click to expand...
Click to collapse
I have the same problem, also using an ana
log daptor. The today plug cab in also does not work in order to change the network, was working fine on the Trinity.
pff , i dont like to cut in my sim cards...
They are from my work.. Is there no other solution?
dual sim card PDA phone
how about this for a change?
http://www.myphone.com.ph/
I'm just waiting for HTC to make a handset like the Kaiser with dual sim slots, its a complete pain when I'm in work carrying a work one. Might be worth suggesting it to them, don't know how much they keep an eye on these sort of forums.
BiasX said:
I have a analogue dual-sim-adapter from http://www.hot-wire-telekom.de working in my Kaiser.
It's working fine with one problem: The operator names are not shown right. The problem was also known with the Artemis, but solvable by a registry change. This change is not working on the Kaiser, because the needed registry key is not present.
Does anyone have a solvation for that?
Click to expand...
Click to collapse
The todayplugin.cab doesnt work for me. How do you switch the network?
any updates on this?
how to stitch sims
yeah, I have an o2 flame, and I'm wondering how you choose which sim you want to make an outgoing call on? And can a incoming call come to either of the sims or do you have to switch something?
I recall seeing special tools out there allowing you to copy several sim cards onto one single one. Then when you turn on the phone, you can chose which "virtual" card gets powered up. Check it out on ebay.
do you have a name? for this tool/app ?
edit:
i found something : http://www.duosim.com/supersim.html
will that work?
Look up SIMORE on the web. The adapters have not been fully tested for Kaiser yet (P4550) but as it works on most other HTC units it should be available soon. Also gives many other functions.
This is another snip ya sim system but comes with two adapters to turn them back to full size when needed.
Hope this helps.
http://www.simore.ch/en/mobile_phone_accessory/HTC/P4550.html
any1 tested?
I want too, but i want to be sure the today plugin is working correctly
Also if you are roaming, will it switch automaticly ? Or do you need to manually switch provider?
wow that looks pretty good...
i am really interested too....
i think it switches automaticly.
anybody?? this sound really good
Word of advice, while I've been investigating various dual/multi-SIM solutions available on the net, it's become apparant that many of these are quite "fishy". I.e. they don't work as advertised. A lot of issues especially with the newer 3G-SIMs. When it comes down to Simone, they are incredibly expensive and also get quite some pepper on various forums. Don't be fooled by a fancy website
If you absolutely do want to test out a dual-sim solution its probably better to risk a way cheaper solution from e-bay as it seems its mostly the same one or two producers behind most of these products, just sold by many different people/resellers.
/Mac
i have used the dual sim adapter without succes. it seems that cutting the original sims has to be done very acurate which i did but no results. Also a lot of pressure has to be aplied on the sims/apapter for good contact otherwise it would work.
may be in near futere i would like to try a non-cut version.
cheers, Steven
There is another way to do this : instead of inserting two, cut, sim cards, you just insert one sim card but programmed with two different sim cards.
I made a thread about this, I just wanted to know if anyone had experience in that : http://forum.xda-developers.com/showthread.php?t=349410
This sim card programmer can be found here :
http://www.duosim.com/supersim.html
As it's not very expensive, it could be interesting to test it.
dizzy33 said:
There is another way to do this : instead of inserting two, cut, sim cards, you just insert one sim card but programmed with two different sim cards.
I made a thread about this, I just wanted to know if anyone had experience in that : http://forum.xda-developers.com/showthread.php?t=349410
This sim card programmer can be found here :
http://www.duosim.com/supersim.html
As it's not very expensive, it could be interesting to test it.
Click to expand...
Click to collapse
The problem with this thing is that it cannot backup the newer SIMs. I tried this with my Cingular 3GSM SIM and it would not work. It only works with older SIMS. So if you have two older SIMs you could be in business.
Steven13 said:
i have used the dual sim adapter without succes. it seems that cutting the original sims has to be done very acurate which i did but no results. Also a lot of pressure has to be aplied on the sims/apapter for good contact otherwise it would work.
may be in near futere i would like to try a non-cut version.
cheers, Steven
Click to expand...
Click to collapse
so you have used the one advertised above?
I am using Simore card in my Kaiser for 2 months now...
FYI, Simore cards do not support 3G protocols: I had problems with it (freezes, no access to 3G or 3G+) and phoned Simore company and they confirmed it. I can only use Edge as the best protocol available for data.
For avoiding any problem of freezing, you need to set in the "band" index of the phone parameter menu the type of network you use (GSM or CDMA) instead of leaving the default "automatic" choice. You can leave "auto" for "GSM /UMTS" Band parameter (even though Simore told me to set the first choice: "GSM (900+1800)+UMTS (2100)"...)
moderateinny said:
The problem with this thing is that it cannot backup the newer SIMs. I tried this with my Cingular 3GSM SIM and it would not work. It only works with older SIMS. So if you have two older SIMs you could be in business.
Click to expand...
Click to collapse
This is true. It is not yet possible to copy a 3g sim. Someday the code in the sim will be cracked though.
laubet said:
I am using Simore card in my Kaiser for 2 months now...
FYI, Simore cards do not support 3G protocols: I had problems with it (freezes, no access to 3G or 3G+) and phoned Simore company and they confirmed it. I can only use Edge as the best protocol available for data.
For avoiding any problem of freezing, you need to set in the "band" index of the phone parameter menu the type of network you use (GSM or CDMA) instead of leaving the default "automatic" choice. You can leave "auto" for "GSM /UMTS" Band parameter (even though Simore told me to set the first choice: "GSM (900+1800)+UMTS (2100)"...)
Click to expand...
Click to collapse
Hi there,
would like to ask you several quick questions:
1. are you mounting two GSM SIM-cards on your SIMore?
2. are you using "SIMore Gold #1" model for the adapter?
please advise (laubet / anyone that has tried it before).
thanks for the reply.
kaiser wrking with gold simore 1
I finall figured out how to get this dual sim card to work. You need to first manually switch the network. For me its T-mobile and AT+T. Once you manually choose the network, then use the sim program to choose the appropriate sim card. For some reason automatic selection of network does not work. Any other way hangs card, or makes network unavailable.
Hello
Did some one uses dual sim card adpaptor for using 2 number at the same time online ? with the Himalaya ? if so, which ? Thanks
Hey,
I think it should be possible. The most dualsim adapters are changing the sim card after a reboot.
have a nice day,
gustl
olimpus said:
Hello
Did some one uses dual sim card adpaptor for using 2 number at the same time online ? with the Himalaya ? if so, which ? Thanks
Click to expand...
Click to collapse
It is NOT possible to use 2 numbers online at the SAME time with only ONE Receiver Transmitter Unit. Its just technically impossible.
You can use a Dual (multiple) SIM-Adaptor , but there is only ONE sime at the time active. You can change the active SIM by disactivating/activating Radio or by a tool.
It's possible to use a dual-SIM adapter on all and any phones (in theory), and it functions exactly as what gustl has said. But the hard part is finding the right one so it fits in to the back of the phone. GL finding the right one that can fit right on the Hima, considering how tightly packed the back of the Himalaya is.
But i think the question was in deed it is possible to habe two numbers online at the SAME time, with a dual Sim Adaptor, and this is NOT possible.
There are some phones in the Market with two GSM Units. They all have the same problem double GSM Units equals double Power consuption, your standby time decreases dramatically.
Using a Dual SIM Adaptor is a good alternative two have possibilty to change between two Sim Cards, BUT there is only ONE Oneline at a time. (What should be good enough for 99% of us). If you really need a second SIM active i would prefer a small second mobile. (Just my 2 cents)
Dual SIM adapters use SIM toolkit to switch between SIM's. As there is no working STK for WM6.1 on Hima it will NOT work.
Possible for 2 sims to be toggled at one go using dual sim adapter
Sorry for posting this reply a bit late, just came across this thread today. With regards to your query as to whether dual sim adapter will be able to toggle 2 SIMS at one go, my answer is yes. I've done it before with my O2 XDA II but unfortunately I’m unable to do it now once I upgraded my rom to 1.60.00 WWE. Only one rom version for himalaya will be able to do it but till now I'm unable to locate it. The version I'm referring to is 1.52.00 WWE. If anyone happen to have or stumble upon this rom, appreciate if you could either upload it or point it to me as where I can locate it.