Alright my At&t tilt front face buttons started to not work (i could only use the arrow buttons and the ok button) and my keyboard stopped working but the arrow keys would. i upgraded the rom after calling htc for help. that didnt fix a thing and now today none of the buttons work. i keep getting the PTT to come up and ask for installation and edfc keeps typing themselves on the screen. so idk if it is a software problem or if the hard ware is malfunctioning.
Damn, I got the same problem. Does anybody know how to fix this?
the same problem here... :/
same problema here.
i already tried another radio, another SPL, another ROM and nothing.
any idea?
Just updating.
Yesterday my tytn started working perfectly again, but today the same problem is occuring. I did nothing, so probably is really a hardware issue.
I have a similar problem.
Send/End + Soft Keys + Keyboard are not working. The issue is not resolved yet?
Wow, this problem just happened to me as well. I've searched everywhere on the net and couldn't find anything.
So is this a pervasive issue? Anyone with any hint as to what might be the source of the problem?
Originally, I thought it the PTT button was stuck in the PRESSED position because the phone behaves as if this button was constantly being pressed. For example my PTT button was mapped to Voice Recorder if the PTT button was held down. The voice recorder constantly comes on everytime I turn the phone on!!
1234567890
I have the exact same problem.
The only change I recently made (two weeks ago) was installing tom tom navigator.
First I thought it was a virus and I installed bull guard, but with no success.
It opens/closes the start menu every second, no buttons work apart from the directional buttons and it writes "edfc" in my textmessages when I turn on/off the screen with the power button.
Most of the time(!) this irritating opening/closing of the start menu only happens after I first turn off/on the screen (with the power button).
I saw this problem described in a post dating back almost two years ago. Someone ought to know the answer to our problems. What does HTC say about it?
I have been lucky and not had this issue yet; but I would recommend starting by flashing the stock rom from HTC. Then hard reset; that will clear everything back to original. If you still experence this after that, then you have a hardware issue. Good luck
This just happened to me this morning. I cant use any buttons and nothing is popping up. This is soo wierd cause the phone was just sitting there overnight!!
Me too...
I have been going nuts with this issue for a couple months now. Makes the phone unusable half the time. I am so disappointed to find that a ROM reload doesn't fix it!! I remapped the 6 key to none and that sort of helps but it was mapped to Voice record before and it would constantly record memos until all the memory was gone in the phone and then it would all crash from there. So frustrating.
I too get the edfc message after I reboot....
It really seems like a virus the way it acts but I guess if it is a hardware issue then it's not a virus.
Anyone ever figure anything out with this? Nothing has changed on my phone recently.
Still an issue?
Holy Toledo fellow Tilt Users. Have you ditched your half-functioning touchscreen, or have we figured out how to solve this issue.
Recently I FOUND THE SAME PROBLEM!
I am going to do what was suggested (original HTC Rom & hard reset) and will let you know if I get the rest of my keyboard back...
All buttons except for power and... NOT WORKING
Outside "Enter" buttons work but they are mapped to Windows key. ? Weird. For some reason the kaiser thinks it is something else. I do not know how it got this way, but there must be a way to convince the hardware of the existence of all my other buttons. The entire keyboard does not work.
Hard Reset & stock HTC Rom did not help. I was surprised that I could hard reset it at all since the two soft buttons are unresponsive to software.
Anyone figure this out yet?
Hi, I got the same issue today as well - Has anyone got rid of this?
Related
Has anyone come across the problem of a TILT hanging up (could not find common denominator when does this occur) and ONLY the "Start" icon (and the "start" button)is inoperable. i.e. all functions work perfectly, however I have no way of getting to the Start screen - only soft reset. Help anyone
Do you have a password set? Does this only happen after a call? If so, this has been discussed many times - just do a quick search.
If not, I´m afraid I can´t help you with your issue.
Good luck!
djmaven said:
Has anyone come across the problem of a TILT hanging up (could not find common denominator when does this occur) and ONLY the "Start" icon (and the "start" button)is inoperable. i.e. all functions work perfectly, however I have no way of getting to the Start screen - only soft reset. Help anyone
Click to expand...
Click to collapse
I think I had this problem also. I'm not sure what causes it, but it looks like ti appears after I try to use MS Voice Command.
I had this problem. I found it doesn't need a soft reset, just switch it off (hit the power button briefly) and back on again. Fixed it every time. Annoying but not fatal...
I am having a similar problem. I recieved an 8925 with a touch screen that doesn't work. No physical damage, but I noticed there is no start screen. I got it to upgrade to WM 6.1but still no start menu or system settings. It boots to the align screen but of course the touch screen doesn't work so that's all I get. Sometimes I get past that and the rest of the PDA seems to work with the keypad. I have reset it several times and still nothing. I removed the touchscreen and ordered a new one. Hope I haven't spent folishly. If someone has a clue to what the problem is I would be very grateful.
Last night my kaiser went crazy. The keys don't respond anymore. It also opens comm-manager and the dialer randomly, I just don't get it. Is there anybody who's got the same problem? I tried soft reset, hard reset and flashing 2 times but nothing works. Is there somebody who's got a solution?
Steelduines said:
Last night my kaiser went crazy. The keys don't respond anymore. It also opens comm-manager and the dialer randomly, I just don't get it. Is there anybody who's got the same problem? I tried soft reset, hard reset and flashing 2 times but nothing works. Is there somebody who's got a solution?
Click to expand...
Click to collapse
Sounds like a physical problem to me. Either a loose ribbon cable or a stuck key that is not releasing. Only one other possibility in addition to those two and that would be if any of the keypads got wet or damp - this could have the same effect.
Mike
The other day all the hardware buttons on my ATT Tilt stopped working - just power and camera would work. The rest would do nothing except sometimes the dpad would open the start menu. I couldn't even answer the phone as the green button wouldn't work. The keyboard would not work either which made email a pain. I did not drop it in water, it just stopped working.
Tonight I loaded the trial of AE Button Plus - google or search XDA for their site. I reprogrammed all the outside buttons on my tilt back to their original use (not hard at all) and even upgraded a few buttons. Now all my buttons work great and the keyboard even stared working again!!!!!
I am not affiliated with them at all, but I saw some others of you with my problem. This is a much cheaper solution than getting another phone. To buy the program it is about $7, but there is a 14 day trial so you can see if it works for you. I was about to replace/upgrade - but now I can keep usingg this awesome machine!
(I do notice some minor lag sometimes with the buttons - but just being able to use them again is well worth it for me!)
Will
hard reset?
if the issue was fixable after installing some software (ae button plus), then i guess a hard reset would have worked also...or better yet, flash another ROM while you're at it, preferably one that is cooked to a medium golden-brown texture by the finest chefs this side of cyberspace...
<Drooling-Like-Homer>MMMMMMMMM ROMMMMMGHGHGHGH !!!</Drooling-Like-Homer>
Maybe I was didn't say it well enough...
It is funny that a software fix would work, my guess is a hardware problem with the phone, but the software is a workaround for it. They keypresses were there, the phone just didn't know how to handle them. If it was a driver issue - one of the roms should have fixed it.
Maybe I was not clear in the first post, but the buttons did not work. When you pushed the power button, keys 'wszx' would type in the phone - evidenced by it searching for a contact that matched every time it powered up - power button or slideing the keyboard out. The only button that worked normal was the camera button. They keyboard was completely unusable - no response on the machine. Soft buttons = nada.
First I tried a hard reset then I flashed at least 8 roms and about 6 radios. Nothing worked. Even started a post on a touchscreen only rom and basically found what would work without buttons.
In my search for the fix in the last two weeks, I basically came to the conclusion a new phone was in order. Now I have a bit more time
Hi all, please can you help me with this!?
Firstly when my phone boots or is taken out of sleep mode it immediately activates voice record as if this button has been pressed. It then opens the dialler and types ‘EDFC’. If I open pocket word and then wake the phone up it also types ‘EDFC’ before doing the above.
My keyboard is not working and the only hardware buttons that function are the power button (only for a while), the camera button and the silver select button in the middle of the d-pad. The jog wheel and silver directional d-pad buttons occasionally come to life. The others don’t work (green call and red end buttons, ok, windows etc).
When I use the standard keyboard SIP on the screen the directional buttons and delete do not function?!
I’ve reverted to a stock ROM to make sure this isn’t the problem.
It appears as though my Kaiser thinks these buttons are being depressed, but I’ve checked them and they click normally and release when pressed (even though they don’t perform a function) so nothing is stuck down etc….
I’m going to use AE Buttons to try and unhinge the button functions for now, but it would be great if someone has any suggestions!!
Thanks in advance.
Update - AE Button won't unhinge the buttons or change their function to anything else (e.g. nothing). I can't stop this from happening every time the phone boots/wakes up!
Help!
Mine got the same symptoms last week except it opens quick something or other,and then the dialler dials 2547.The screen for my pin then comes up,which I can enter normally.Home screen fires up normally but the keyboard will not work or any buttons except the silver one in the middle.Searched a bit and this problem is very common although I cannot find a solution anywhere.Can someone please help
AE button didn't work?
When mine did that, I reset all the hardware buttons (not the keyboard, just the buttons reachable from the outside. A soft reset and viola!
That's the only solution I have. It's worked for me 2x.
Also try pulling the battery for 20 seconds or so and restarting. That has fixed my touchscreen not working after it gets spashed 3x. Yeah, my phone is old and abused, but keeps working.
Will
wasilvers said:
"I reset all the hardware buttons (not the keyboard, just the buttons reachable from the outside. A soft reset and viola!"
Click to expand...
Click to collapse
Thanks for your replies - I've got Orange sending me another one in the morning now and sods law it's just stopped happening.... Taking the replacement anyway in case it happens again.
For my knowledge, how did you reset the buttons? I deleted some registry keys to completely stop them working (although I couldn't find the registry keys for the red and green buttons).
Searching on Google there are quite a few reports of this, but no one has ever posted the cause!
I am having the same problem... please help. My phone is going crazy. I did a hard reset but still didnt solve the problem....
I am also having this issue. Phone starts typing EDFC and then initiates the voice recorder. I reflashed various ROMs and regardless of what was flashed.. initially they appeared okay, then it started happening again. I also tried hard and soft resets. Nothng has worked so far.
I resorted to disabling the keys and some of the applications which I dont use which appear to be getting started/run (Voice recorder for one). So far I havent had the issue, knock on wood.
I think this is more than likely a hardware error. My tilt is actually pretty old so I wouldnt be surprised. If someone finds either the cause or a workable solution please post. Im trying to hold off until January when my contact expires to get a new HTC.
I searched and searched but found no solution for this and ended up getting the phone replaced.
HTC seemed to know nothing of such a problem....
Have you tried whacking it?!!?
Hope you get it sorted.
brandall said:
Have you tried whacking it?!!?....
Click to expand...
Click to collapse
Hmm, yes, but I don't see how that helped my phone.
lol, all jokes aside, my friends, I ask in this thread as well,
what is causing this problem? I ran into this issue after ALL my buttons stopped working (except for the power).
I installed a new rom (I forget which one), and still nothing works except for power button.
It would be even better if someone knows the solution!
-Calling for Help-I'm still convinced it is a software/registry problem...
Okay, so there's no solution available for this weird problem of ours.
On the bright side, however, it is amazing that we can still use the phone, even after it requires servicing (some way or another). I have accepted this handicap that has been placed on my phone for now, simply hoping it will grow out of it one day.
But something isn't right. When I looked in the registry (trying to follow some directions I found within the wiki for when your keyboard STILL doesn't work properly), there was a discrepancy between what was supposed to be found in the registry and what was actually there. It wasn't that the values were wrong, it was the names of the values that were different. Why could this be?
Or even if you have moment of time, and you have an AT&T Tilt, and it works perfectly, maybe you could write up a run down of what you have hanging around in that section of the registry?
Hey, just so I can be sure, is there some place I can cross check what I have in my HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP with what is supposed to be there in a fully functioning AT&T Tilt?
hi guyz
ive a AT&T Tilt (Kaiser 100). so ive flashed my kaiser loads of times no problem was running great until now when i unlocked it the PPT button and call program open up themselves and some ramdon keys such as E,D,C,etc are pressed!!
also the slide keypad stops responding but the lights are still on for it. the navigational buttons on screen side stop working and the start menu opens up by pressing the button in the middle of navigational buttons!! rest of the keys dont work. power and camera keys still work!
i gave my phone a rest for 4 hours and when i turned it on it started working fine and then again after 5 minutes of use same problem. sometimes in the middle of use it automatically starts working again fine and then same problem comes and this keeps going on!!!
one of my workers at the office mishandled my phone (i think) he couldn't figure out how to slide open the phone and tried everything
so i cant rule out if its hardware or software problem???
please help!!
Hard reset your device and see if that solves the problem.
lol clown wats with u and hard resets? anyway yea try a hard reset or flash a new rom mabye
jsngrimm said:
lol clown wats with u and hard resets? anyway yea try a hard reset or flash a new rom mabye
Click to expand...
Click to collapse
Because sometimes...well most of the times, with a help thread request like yours are solved with a hard reset . Going by the book...(oohh and it was late last night by the way )
On another note, seems like your friend did mess some of your keys and probably hardware issue. Try and mess with some keys and see if they are not stuck.
In most situations it quicker and easier to reset the phone. Just thnk about it, you don't have the original OS to repair with and you don't really have a method of sending commands to the phone.