hi,
the following link > http://www.myimagespace.com/public/view/1885
is the picture template used as camera frames, they are called
collage frames, they are found in every htc phone but the problem is
they are stored in rom and are protected, you cannot rename or delete them, though on the option menu there is delete and rename
but you cant click them...
is there any way to remove them from the phone?
any hard reset reinstallation or anything else?
hope to get a helpful answer...
fady.
You can disable this camera mode via registry.
Dump > Delete Files> Flash ROM.....
or
delete the templates folder and use the frames
from the \windows\ folder with this registry
HKCU\Software\HTC\Camera\6.00\Strings
Template Folder = \Windows\
the same with smileys & RSS Hub( german HTC T_D )
look in the registry,
you can delete all the file wich is also in the \windows\ folder
but you must change the path(Strings) in the reg....
greetz
Related
Okay, there a couple of CAB files I install no matter what ROM I use (Total Commander, Today Screen Speed Dial, MortRing [by .exe], Morphy's Call Filter etc), now that I'm getting to grips with the whole ROM building thing I have a question:
How can I add a program installed via a CAB into a ROM so that it is installed into ROM, I've searched on the forum and can't find much. I know it can be done as ROM's such a TuMa's, Logout's and Ivan's have apps in ROM which aren't there by default...
EDIT: In addition, I overwrite some of the default ROM stuff once I've installed (ETEN M600 Dialler in particular), so again, how can I get the 'bits' out the cab and overwrite the default contents of the ROM, this would make my life much easier...
If this has been posted previously then please point me in the right direction
First extract files, shortcuts and registry entries from the .cab using wince cab manager or similar http://www.ocpsoftware.com/, take note on what directory each file/shortcut is in. (often more reg entries will be stored as a file called 'platformxxx.reg' use these too)
Normal rom edit way: add the contents of the exported .reg files to default.rgu, making sure that you leave a blank line on the end, copy all the files to the \dump directory and edit initflashfiles.dat to copy them to the right directory on first boot. (remeber to remove the first two bytes - ff fe with a hex editor). then build your rom!
Bepe's rom edit way: create a folder '[your software name]' in the oem folder and get yourself a guid from here http://kruithof.xs4all.nl/uuid/uuidgen. create a blank file called '[yourguid].dsm and a blank text file called '[yourguid].rgu'. add the contents of the exported .reg files to '[yourguid].rgu' and make sure you save as unicode. then copy all the other files to the folder and create a blank unicode txt file called 'initflashfiles.txt' and use it like initflashfiles.dat in the first method except there is no need to hex edit out the first two bytes. then build your rom!
midget, you're a star, I thought it may be something simple... I'm off out with the family now for the day, but I'll work on this later, cheers!
I used a registry tweak to disable the default AT&T dialer and now I want to change out the images. I am having a problem copying clg_in.gif, clg_miss.gif, clg_out, and spd_lst.gif into the \windows directory. I keep getting an access denied error message. I have turned off the phone and did a soft reset, but that didn't make any difference.
I have attempted to replace the files using my desktop computer and File Explorer.
Does anyone have a solution so I can copy over the four new files?
Thank you.
resco explorer allows you to force the copy.
Thank you.
ekw said:
resco explorer allows you to force the copy.
Click to expand...
Click to collapse
I will give it a try. Thank you.
Update...
I downloaded Resco File Explorer and installed it. I copied the four images to \windows and after confirming the files copied. I can see the correct images in \windows. I did a soft reset but the old images are still showing. I verified that the new images are in \windows. Why are the old images (AT&T crap) still showing?
Thank you.
Bumping = Bad
Sorry to bump my own thread, but I'm fairly confident that someone knows how to correct this problem.
I downloaded Resco File Explorer and installed it. I copied the four images to \windows and after confirming the files copied. I can see the correct images in \windows. I did a soft reset but the old images are still showing. I verified that the new images are in \windows. Why are the old images (AT&T crap) still showing?
Thank you.
its probably a cache issue, such as if u put a picture on a contact, then delete the picture, the picture is still on the contact.
but, i dont know how to do what you are asking.
You can just flash the rom im sure there are more customizable friendly roms out there.
Hi!
I was just wondering if it was possible to save the words you have added to the T9 dictionary. It would be nice to have a backup if you flash your Diamond often.
Sure is...
unzip the attached file copy paste to your Diamond.
Start using it
Ok.... i tried downloading the file but it cannot open the file... file error!!!!!
try this one...
try again. I try download it just now and i can open ok.
Sourceress said:
try this one...
Click to expand...
Click to collapse
Awesome dude.
Pretty much what I was looking for some time.
Now, is there a way to backup this whole list, so we can restore it after flashing a new ROM?
Thanks!
can, lah...
select text in T9MyWords > copy > paste into a text file > save the text file in a save location (e.g. Sync Folder "My Documents" or Internal Storage).
After flashing a new ROM: select text in the text file > copy > paste into T9MyWords.
Sourceress said:
select text in T9MyWords > copy > paste into a text file > save the text file in a save location (e.g. Sync Folder "My Documents" or Internal Storage).
After flashing a new ROM: select text in the text file > copy > paste into T9MyWords.
Click to expand...
Click to collapse
Sounds simple. Have ya tried it? Doesn't work bro. The text are placed line by line, not in a textbox.
Im thinking I could backup the following files:
\Windows\eT9Cdb.Cdb
\Windows\eT9Rudb.Rdb
Both of them contain words (and more) from the T9 list. Gonna do some reading up and see the significance of these files.
oops... I'm sorry. tweaking with more than one proggis at the moment....
BoogieCornejo has given following solution:
go to windows folder and save these 2 files. eT9Cdb.Cdb and eT9Rudb.Rdb. after hard reset rename the original files in windows folder to anything you want then copy your saved files to replace the renamed ones.start a message or any text document and add a word.you'll notice the words you stored from before the hard reset will still be there...
Olafson added one more file:
eT9Rudb.Rdb
eT9Cdb.Cdb
eT9AsDb.Adb
1) Copy files from windows to another location
2) Change attributes from read only to archive
3) Overwrite files in windows folder (Now the files are not in rom)
4) If are still read only you have to change again in Archive (Now you can because files are not in rom)
I did not try yet as I flashed my rom yesterday night
Sourceress, Thanks so much for this! I have been looking all over for a way to update my T9 dictionary to get rid of some annoying words! This exe is a mind saver!
Thanks really useful - why HTC doedsn't include this facility I've no idea!!
The program is simple but wonderful. I was looking for some ways to clear those words too.
I just downloaded the .exe and removed the word Im but for some reason when I use t9 it still uses Im when I type i then m instead of I'm with the capital I and apostrophe. Any ideas why?
Really a big big thanks for this posting. Fantastic program, awesome!!!
none of these two files works for me... that's strange!
Thanks a lot.It works fine. I look for something like that for a long time
I searched couldn't find anything. I want to know if it is possible to put the programs I install into folders in the honeycomb menu, for example put Corplayer in Multimedia. BTW I have energyrom 3.0 build 051209 but that shouldnt be hat important.
yes it is possible, use a file manager such as Total Commander or maybe even just File Explorer goto you program files folder and create a shortcut of the .exe that loads CorePlayer and then move that shortcut into \Windows\Start Menu\Programs\Multimedia and then your shortcut will be visible you don't even have to soft reset
ok thanks man
dont mean to be dumb, but when I use file explorer to cut and paste shortcuts in new folders, they appear in the folder and on the start menu. How do I fix that?
think i found what ur lookin 4. its called reSTART
http://forum.xda-developers.com/showthread.php?t=481379
I´ve read about the option, to change the font of TF3D. There was a zip-file with 4 fontfiles inside, all of them i have copied to the windows folder instead of \windows\fonts, because on my device there isn´t such a folder. After doing a softreset my TF3D has changed its font. But when i try to delete this files, it doesn´t work. Not by the file-explorer on the device and not by the explorer of the pc when connected using ActiveSync.
Is there a way to delete this fontfiles, so that the TF3D changes its font to the old one ?
Another question : How can i change the fontsize of TF3D-Font ? The calender on the home screen is a little bit too small.
Thanks.
Disable TF3D then reset and try to delete the file.
No, it doesn´t work. The files cannot be deleted.
Maybe i should let them on the device, by the next hard reset they will be deleted anyway