can somebody help me i'm searching about 2 months but i don't find enything....
my problem is:my tilt don't recognise anymore my usb cable neither my micro sd card...I want to upgrade to 6.1 to solve the sd problem.i think is a driver problem because after i install wm5torage on sd card after soft reset no any sdcard anymore...
ps.i think i tried everything...hard reset etc...
please help!!!
It is in the wiki
The first thing you should have done was check the wiki. It gives step by step instructions on how to flash via the sd card. Just a suggestion.
yes i know but my til don't recognise any microsd card anymore...
nstnkt said:
yes i know but my til don't recognise any microsd card anymore...
Click to expand...
Click to collapse
well if your tilt isn't recogonizing your sd card than i would suggest trying a different microsd card and see if that is readable by the microsd slot. If not than that might be a hardware failure and is covered by 1 year warranty from date of original purchase.
If you think it is because of wm5 storage than try a hard reset and see if that solves the issue .. although i doubt it will but doesn't hurt to try.
i already try a hard reset but noting change...
and i bought my tilt on ebay...i dont think is covered by warranty
but i don't give up!!!
nstnkt said:
i already try a hard reset but noting change...
and i bought my tilt on ebay...i dont think is covered by warranty
but i don't give up!!!
Click to expand...
Click to collapse
try a different card and see if it recogonizes that one
Reformat micro sd card with your PC
Make sure your card is formatted correctly. I'm not sure, but I believe it should be FAT32.
i already tried 6 diferent micro sd cards...all formatted in fat32
nothing changes...
i forgot one thing.when i power on my tilt it says if i want to format my sd card but there isn't any card inserted!!!!
Related
can anyone help? ive just brought a 2gb sd card and my o2 xda iis wont read it? is there a patch or software to help?
2gb cards are general ones any pda can read them if u r getting any problem try some other cards on ur pda, if they works repalce the 2gb asap.
tried a 128mb card and it wont read that either...
Make sure the card isn't a SHDC-type of card (most likely not, but one never knows).
Does the phone even see the card, or does it just have problems reading it?
Tried reformatting it in the phone? A known issue is many programs on a stand alone computer will try to format SD cards as drives (floppy or otherwise), which is the wrong formatting for flash devices.
no its not a shdc card.. ive no idea how to format the card in my phone ( a o2xdaiis), it shows the slot in use but no storage card
rewster36 said:
no its not a shdc card.. ive no idea how to format the card in my phone ( a o2xdaiis), it shows the slot in use but no storage card
Click to expand...
Click to collapse
Well, you can format it from your computer using a card reader and the flash formatter software from panasonic, or you can get an evaluation version of various different programs for the PPC platform that will do it as well.
Google for it, there are a lot of different ones and I've only ever used the panasonic software and a usb card reader.
not hain any luck .. got a flash card programme but my xda wont read any memory cards at all
rewster36 said:
not hain any luck .. got a flash card programme but my xda wont read any memory cards at all
Click to expand...
Click to collapse
If the cards are readable with the computer and/or other devices but not in the phone, I would suspect a hardware or potentially software problem with the phone.
Has the phone been able to read any cards at all, or is this the first one you have tried?
Have you tried backup up your data and hard resetting the phone?
tried a 128mb card and the 2 gb.. it reads the slot in use but no memory card ..think the problem may well be the phone... it had mobile 2003 on when i brought it have now upgraded to mobile 6 and still donrt work
rewster36 said:
can anyone help? ive just brought a 2gb sd card and my o2 xda iis wont read it? is there a patch or software to help?
Click to expand...
Click to collapse
i use normal apeed SD is ok
run 4D SDHC , ths pda can't detect the card so
use 2G non SDHC is OK
Uprgaded from v2 to v4 of Leo's soft. And now can't format my 4 SDHC card ;(
edit: using Resco.
And yes, read the forum but nothing found about this.
markata said:
Uprgaded from v2 to v2 of Leo's soft. And now can't format my 4 SDHC card ;(
edit: using Resco.
And yes, read the forum but nothing found about this.
Click to expand...
Click to collapse
So you made NO CHANGE (V2 to V2) and now can't FORMAT your card?
Formatting is not something that you do in the phone is it?
Are you sure that it is seated correctly - take it out and put it back in?
Can you write to the card with a computer?
Bill
soory, to v4 i meant. Yes, Can write to the card with my PC. I pulled it out many times, flashed also.
The icon of Storage Card has something like sim card on the half of it? Why it is so.
It is no big issue that can't format it, but to save time when need deleting all files it is inportant.
Any other suggestions ?
why are you formatting the card in the phone? why not format it via PC ?
not having card reader.
markata said:
not having card reader.
Click to expand...
Click to collapse
Totally lost here...
You imply in your message that you had version 2 of this ROM and that the card was in the phone and worked flawlessly - no issues.
You imply that by simply upgrading that you cannot FORMAT the card now. Can you read from the card and write to the card in this new ROM? or is this card magically DEAD now that you have upgraded?
I am assuming that you REMOVED the card when upgrading and possibly that you took a static charge hit on the card while it was out of the phone?
Or that you did NOT remove the card - please note that recently (last couple of days) I remember seeing that someone ELSE messed up their card by leaving it in the phone while flashing a ROM update.
Bill
Upgrade my v2 to v4. Pull out my sdhc card and sim card. And then when tried to format my card using Resco Explorer, I get this message
Here it is how looks like:
http://img501.imageshack.us/img501/6226/p5230129800x600jv0.jpg
http://img230.imageshack.us/img230/6272/p5230132800x600kp8.jpg
markata said:
Upgrade my v2 to v4. Pull out my sdhc card and sim card. And then when tried to format my card using Resco Explorer, I get this message
Here it is how looks like:
http://img501.imageshack.us/img501/6226/p5230129800x600jv0.jpg
http://img230.imageshack.us/img230/6272/p5230132800x600kp8.jpg
Click to expand...
Click to collapse
No idea - here are my current guesses:
1. somehow your card got write protected?
2. somehow the upgrade corrupted your card?
3. the new ROM cannot read cards of that size?
4. something else that I have no idea about.
Personally - without trying to read this card on a PC I would not continue to mess with it. You will FOR CERTAIN corrupt it if you keep trying.
Bill
markata said:
not having card reader.
Click to expand...
Click to collapse
umm.. buy one, they're cheap and handy...
I got one from Brando..
It's out of stock right now, but it was only $12 with $3 shipping anywhere in the world..
---I assume we're talking about microSd card here right?
Product link: http://usb.brando.com.hk/prod_detail.php?prod_id=00293&dept_id=015&cat_id=031
I got a card reader that supports micro SDHC !
So, in the main directory i have a file named EncFiltLog.menc - and this is why i can't format from card reader or ppc. I even can't delete it, what I am gonna do ?
As I understood from this forum and google this file can't be removed after hard reset, right ?
i have this exact same problem too.
using a sandisk 4gb microSDHC
same message using resco and also on L26 V4
fjc3 said:
i have this exact same problem too.
using a sandisk 4gb microSDHC
same message using resco and also on L26 V4
Click to expand...
Click to collapse
Same exact card, same exact problem.
Did you ever figure it out?
Im facing same issue, I think that root cause is within XIP.
i too have the same issue. i opened tom tom one day and tom tom closed on me and the micro sd had lost everything off it. now the card cannot be used.
did anyone find a way to format the card to use it again?
I think you can only format the card on the PC and not on the phone itself, if im correct ive seen a forum post here on xda-dev... (by searching: menc) give it a go and good luck!
Hi guys,
Need some help..i'm using 2GB sd card on my himalaya..installed some apps, mp3's, and games..i noticed that everytime that my himalaya resets, it doesn't detect the files on my sd card..tried checking it on the memory and it was able to detect my memory card but it shows that there's no more free space on it..i only used almost 1 GB of it..when i checked the folders on the sd card, it's empty..well, it could be resolved by just removing then re-attaching the sd card on my himalaya..is there an alternative way to resolve the issue? i've tried other sd cards but still the same thing..and i don't want to disconnect/reconnect the sd card coz i'm afraid that the sd card slot would get damaged.. i also tried to flash different roms on my himalaya but same thing happens..is there any settings that i need to configure?
if you have tried different Cards and different ROM's too..then its some Hardware Issue
have you tried 1GB Cards?
ather90 said:
if you have tried different Cards and different ROM's too..then its some Hardware Issue
have you tried 1GB Cards?
Click to expand...
Click to collapse
i haven't tried 1 GB yet..is it possible that it can't keep up with the 2GB card??
could be, i havent tried 2GB but 1GB Works
ather90 said:
could be, i havent tried 2GB but 1GB Works
Click to expand...
Click to collapse
well, i have tried 1 GB when my hima's rom was wm3..but the apps were installed in the phone memory so there's no problem with it..the only prob that i experienced was when i'm downloading something on my sd card thru gprs..an error something like this.. " the device attached on the unit is malfunctioning "
have u made the perfect Hard reset using the (NO, YES, YES way)?
or like i said, could be a hardware problem
man, i'm getting upset with this problem...lol!!
yup!!! tried it a couple of times..it just happens every time my hima would reset or when downloading something via gprs..it also happened to the other hima that i have..coincidence??
wow...i've searched the forums and found out that this is a common issue..hope it could still be resolved..it really sucks pulling out / putting back in the sd card every time the issue occurs..
tried using a 2GB micro sd on my himalaya and it worked!! my hima's now able to detect the sd/files everytime it restarts.. ^_^
@gtrix
Bro myXx here,fr0m ph. Budy m ako, , ahm, thats c0m0n pr0blem w/our hima! My 1gb sd card,cnt be detectd, too, and n0w im already 2gb mmc, take n0te mMc,n0t sD CARD,, AND N0W my hima cnt detect any sd card any m0re,
i have tried this with 2 different micro sd cards. both 1gb. 1 sandisk, the other is a samsung. both work fine in the g1 and if i connect to my laptop (windows) i can access the files and everything as normal. when i right click and tell it to format however it ejects itself and i have to remount. i do not have an adapter to put it in my card reader, so this is the only way i can do it. can anyone tell me what i'm either doing wrong or a quick fix for this?
dont know man cuz i didnt hve that problem sorry dude
The g1 doesn't like it when you do that. If you don't have the adapter. Your only option that I know of is to format it is from android itself in the system options. Sorry to hear about your situation
kxxstarr said:
i have tried this with 2 different micro sd cards. both 1gb. 1 sandisk, the other is a samsung. both work fine in the g1 and if i connect to my laptop (windows) i can access the files and everything as normal. when i right click and tell it to format however it ejects itself and i have to remount. i do not have an adapter to put it in my card reader, so this is the only way i can do it. can anyone tell me what i'm either doing wrong or a quick fix for this?
Click to expand...
Click to collapse
I have/had the same issue, so i will tell you what i did and maybe it will help. I formatted my sd card on the RC33 update in fat32 and from the computer.(when the g1 liked the sd card).
My suggestion if you don't want to downgrade to upgrade..is to stick the card in another phone that can connect to your computer and format it that way.
Upgraded to cupcake (what ever version you want). Then the g1 was reading my 4gb card wrong. So i removed all info on the sd card just copied to folder on pc and formatted the sdcard through the phone. From there it was reading the card correctly. To go on, i then partitioned with apps2sd. Placed all info back on sd card and waa laa...like magic...or dream...or hero...i dunno confusing...who's on first?
Ok so i bought this verbatim microSD 16gb class4...at first it worked fine on my xperia x8...but today it just decided to not be located at all...
On my pc the card is working properly with the card reader and i tried another sd on my x8, and it worked too..but the 16gb still wont be located...i tried everything from formating it to reboot etc...i tried the 16gb one on a x10mini but no luck either...
any recommendations?
oh and the shop said that they cant do anything cause this maybe my fault
Please help...
I had the same problem with 8gb class 4.
I did like what you did.
Finally it didn't work, I returnd it back to the store.
What I understood is: class 4 sd cards are not working on our x8.
because I asked the guys here and they were answering that they have a working sd cards on x8 but with classes like 2,8,10 not 4!
Sent from my X8 using xda premium
1Fawwaz thnx for your reply
but i could use it for about 2-3 days...and the same happened with an 8gb card but i dont remember of what class..
any ideas anyone?
[UPDATE]
After many experiments i found out that my card was working with thsd card adapter that SE provided once...the one that is like a usb stick...but with a MicroSD to SD adapter,my card wont be located by my pc...
[UPDATE 2]
The card is working fine on my sony ericsson yari.
also i read through the forum that others are using class 4 and its fine..so i cant see why mine wont work...come on guys..you have fixed far more complicated issues...
bakas666 said:
but with a MicroSD to SD adapter,my card wont be located by my pc
Click to expand...
Click to collapse
If the adapter you refer to is really a mSD to SD adapter then your PC would do the right thing(TM). To read a mSD you need a MicroSD to SDHC (<--!!!!) adapter.
SD, SDHC and SDXC are three totally different standards not really compatible to each other.
bakas666 said:
[UPDATE 2]
The card is working fine on my sony ericsson yari.
Click to expand...
Click to collapse
Then there you have your confirmation that the card is actually working.
If the X8 and X10 is refusing the card, then you may have hit a incompatibility (EDIT: that's why it is important to either straighten it out with the dealership that you can return the card in case it doesn't work or that you can try the card right there in front of the eyes of the shop dude). The only way would be to swap the card with one of another brand (like Kingston or SanDisk ... I wouldn't buy Verbatim crap).
In theory the X8 should be able to accept mSD's up to 32GB.
bakas666 said:
also i read through the forum that others are using class 4 and its fine..so i cant see why mine wont work...
Click to expand...
Click to collapse
True, I used a 8GB Kingston Class 4 mSD with my X8 - worked flawlessly.
thnx for your reply..
my card was working in the begining..so im not sure if this is really an incompatibility...
bakas666 said:
thnx for your reply..
my card was working in the begining..so im not sure if this is really an incompatibility...
Click to expand...
Click to collapse
Question is ...
- If you're running a custom ROM ... you tried another one?
- If you're running Stock ... you tried a custom ROM?
Also ... try putting the card into a _working_ mSD adapter and ERASE the partition that's on it. Then "Safely remove" the card reader / card from your PC and put the EMPTY (unpartitioned) card back into the phone. From there you have two options you can try ...
1. Try to partition and format (FAT32) the card in ClockworkMod recovery and see if it works now.
2. Boot up Android and format the card through Android (I think it's "Memory and Storage" in "Settings")
I tried with both stock and GingerDX...same result...im going to try this and post reply in some minutes..
nothing....i tried to partition with CWM..no luck....
I partitioned it with Partition Wizard..no luck again...
pfff...why it just denies to locate it?i was working just fine :S
I take CWM actually recognized the card even at its correct size.
The last thing you can do now is to look through logcat to see if the log holds any hints about why the card isn't recognized/mounted.
You better do that through adb as it's a medium pain in the rear to do that in the Terminal Emulator on the phone.
If you find something that could be related to the issue at hand post it here; maybe the error message carries something that would give a clue.