Related
hi, everybody
I have a Wizard. But yesterday, when I turn on it, i see :" Data Crashes. Plese contact your service Center" with this title: "SIM LOCK" in the screen.
I used awizard, Lokiwiz to unlock it. But nothing at all
please help me
No body help me???? or not have solution to fix this prolem?
try to start it over without a sim-card....what happens...!?
it's oke and I can use it same a pocket.
I am experiencing the same issue. Did anyone find a solution to this? No matter what I use Lockwiz etc... It still wont work. Pls Help
Thx
Beside you is possible violated area CID.In the field of CID is found SIM and CID lock.The Area CID -unique for each device .Lokiwiz -does not calculate new this area -he only modernizes given in this area.
This inscription appeared After what action?
p.s.
There is command In bootloader which destroys the area CID and others.
Check Your IMEI.If IMEI does not coincide -possible you have started this command.
how can solve it?
wlinsong said:
how can solve it?
Click to expand...
Click to collapse
I unsure that you this will help - but when I on C500 has deleted the area CID and got such message - I have restored only with the help of unlock http://www.imei-check.co.uk/ imei-check -anew calculates the area CID - unlock works through bootloader and so he does not modernize but anew calculates this area.
Try to talk with itsme in this forum -he has said that possible to calculate the new area CID -but has not described as.
p.s In Typhoon C500 and Wizard is used alike method SIM and CID blocking.
But aside from this unlock changes bootloader
For you http://www.imei-check.co.uk/m3000unlock.php
arc said:
wlinsong said:
how can solve it?
Click to expand...
Click to collapse
I unsure that you this will help - but when I on C500 has deleted the area CID and got such message - I have restored only with the help of unlock http://www.imei-check.co.uk/ imei-check -anew calculates the area CID - unlock works through bootloader and so he does not modernize but anew calculates this area.
Try to talk with itsme in this forum -he has said that possible to calculate the new area CID -but has not described as.
p.s In Typhoon C500 and Wizard is used alike method SIM and CID blocking.
But aside from this unlock changes bootloader
For you http://www.imei-check.co.uk/m3000unlock.php
Click to expand...
Click to collapse
WOW worked like a charm! Thanks I thought I had a brick!
I hope that this will help you.
I met several times like you situation on Wizard -but nobody did not describe after what action this has occurred.
It is Enough that 1 byte changed in the field of CID and she will be bad.
Possible during unlock or as a result other action (for instance action what other program ) has occurred the malfunction and something have changed this area.
Given area is not changed during flash ROM.
arc said:
I hope that this will help you.
I met several times like you situation on Wizard -but nobody did not describe after what action this has occurred.
It is Enough that 1 byte changed in the field of CID and she will be bad.
Possible during unlock or as a result other action (for instance action what other program ) has occurred the malfunction and something have changed this area.
Given area is not changed during flash ROM.
Click to expand...
Click to collapse
thanks very much
not solution to fix this problem!!!!!!!!!!!!!!!
Okay, I can report that paying for this software and running it on my MDA fixed the data crashes problem. I tried everything I could find on the web from using the lokiwiz02b and going back to the original rom... everything in every order I could think of. I flashed back to the original ROM which I downloaded from HTC America's site w/o the SIM in the phone, ran this software after shelling out 40 bucks, once it came back up I shut down, put my SIM in, booted and sure enough it worked.
Here is how I got in this position. I had a warranty replacement phone from a bad screen that kept getting out of calibration. I put my SIM and MINISD in and powered it on. I flashed to the 2.17 custom rom. It rebooted and I got the data crashes error.
Of course this is no guarantee. I see above where someone posted that it didnt fix their problem.
I just flashed up to the 2.21 custom rom and everything works fine.
I noticed after I started all this BS that there are two bad pixels on the replacement phone! SOB!
it worked for me too. but why does this happen in the first place? I only got this error from one of the two MDA's that I have flashed, the other one worked just fine.....
My screen died as well, got a replacement in. Blam drashed as well.
Ran all the loki stuff, and it IS the IMEI that causes it. Used this unlocker program, and it does work. I am on 2.17 now and about to load 2.21.
This is my last resort...
I tried every possible solution to solve this same issue and I am going to shell out the cash, but my problem is that I can't get my IMEI from my phone (#06#) like the imei-check website said to without my SIM in there. But with the SIM in there I can't type #06#. So how did everyone get their IMEI? Should I just use the number on the box, and just pray that it is the same as my phone?
Thanks
earljg said:
This is my last resort...
I tried every possible solution to solve this same issue and I am going to shell out the cash, but my problem is that I can't get my IMEI from my phone (#06#) like the imei-check website said to without my SIM in there. But with the SIM in there I can't type #06#. So how did everyone get their IMEI? Should I just use the number on the box, and just pray that it is the same as my phone?
Thanks
Click to expand...
Click to collapse
your imei is also in the back of the pda under the batery.
Cool, thanks!! Website didn't mention that
earljg said:
Cool, thanks!! Website didn't mention that
Click to expand...
Click to collapse
u can also get your imei by going to start/settings/system/device information and tap the indetity tab
Had a pain with this myself....had to cough up the money and unlock my phone that way but everything works fine now.
I have an MDA vario III - Tynt II
I did manage to unlock my phone eventually , however since I unlocked it I can't make or receive any calls. Anything that has to do with sound on my phone doesn't work, i.e. it doesn't ring if someone calls me , it only vibrates. I can't accept a call, the green button doesn't work when someone is calling me. also, when i make a call and I get through I can't hear the person on the other line and neither can he hear me.
Any suggestions?? I did try to soft and hard reset it but it doesnt rectify the problem. I've also tried to launch the bootloader.
I am worried that I might have made my warranty void now cos of this.
Is that true?
Any help will be appreciated.
Thank you !
Hi Andrew,
When you say you unlocked your phone, what exactly did you do? A SIM unlock I presume so you can use any networks SIM? If so how did you do it? (e.g. software, online, code through eBay?)
What ROM are you running? You can find this in Start>Settings>SystemDevice Information
Copy all the info from that screen including the Radio Version.
Cheers
Zippyioa
which sim unlocker did you use, and did you reflash your original radio rom after unlocking?
Thank you everyone. problem solved. i had to reflash my rom and the sound got restored.
My phone doesnt allow me to call after I used okiwiz
I used the okiwiz to unlock my phone but now i cant mak any calls
can any one help?
I got me a Touch Diamond in the rounder shape of the T-Mobile MDA Compact IV. It came in a sealed box from eBay and I've used unlocking software that I also found on eBay. As it turns out, this software seems to originate from this forum.
As far as I've researched it, right after the lock was removed, the phone started sending SMS messages to the number SMS032837 each time it is reset (since I've never used this phone locked it *could* have done this already, but I doubt it). Even if I switch off the GSM radio, and then reset, the phone waits for the radio to come back on and immedately sends a message.
I have no clue to what's the message is about or whoever is the recipiant but that's not the main issue here; it should not do this, period.
ROM: 1.37.110.3
Radio: 1.20.OliNex
Protocol: 52.26a.25.09U
Anyone any idea what is going on?
TIA,
XDArjen
sorry i dont have any idea
try this steps
1-try hard reset
if not work
2- you have an old ROM so
upgrade it to the latest ROM for your country or use cooked ROM if you want
Could a program similar to RemoteTracker be installed on your Diamond ?
That would explain the SMS, as the software detects that you changed the SIM card.
yea sounds like some program like remotetracker, try flashing a new ROM, as i assume it's build into the ROM by the seller, no idea why though.
xdarjen said:
I got me a Touch Diamond in the rounder shape of the T-Mobile MDA Compact IV. It came in a sealed box from eBay and I've used unlocking software that I also found on eBay. As it turns out, this software seems to originate from this forum.
As far as I've researched it, right after the lock was removed, the phone started sending SMS messages to the number SMS032837 each time it is reset (since I've never used this phone locked it *could* have done this already, but I doubt it). Even if I switch off the GSM radio, and then reset, the phone waits for the radio to come back on and immedately sends a message.
I have no clue to what's the message is about or whoever is the recipiant but that's not the main issue here; it should not do this, period.
ROM: 1.37.110.3
Radio: 1.20.OliNex
Protocol: 52.26a.25.09U
Anyone any idea what is going on?
TIA,
XDArjen
Click to expand...
Click to collapse
Hi,
I`ve got MDA Compact IV on T-Mobile UK with original ROM and Radio (I just need to) and I`ve noticed that after every re-boot it sends above mentioned by you text.
Actually, it sends 2 texts: 1st to 32837 (on the on-line bill it`s clasified as
"unbranded" and it`s free of any charge)
2nd to 100203005 (clasified as "SMS text messaging" and it is also free).
I was surprised as well, so started to investigate.
I`ve found that above texts got something to do with W`n Walk service and T-Mobile My Faves and they are like a system messages.
They are NOT using any of the tariff allowances and they are completely free.
I`m sure because I`m checking my bill very carefully every month and it is my 3rd bill since I started using Compact IV.
I think that every HTC Diamond and MDA Compact IV sends those texts when logging into GSM Networks, but not every network provider shows them on their bills. With T-Mobile it shows on My T-Mobile On-Line account, but not on any paper or electronic bill.
There is more info about the case on other forums, just "google" them numbers and you will find it.
So, DON`T PANIC, everything is in order.
P.S.
My handset is unlocked and I was using foreign SIM card with, whilst on holiday and I haven`t noticed any extra charges for above texts, nor any other problem.
Regards.
snark_be said:
Could a program similar to RemoteTracker be installed on your Diamond ?
That would explain the SMS, as the software detects that you changed the SIM card.
Click to expand...
Click to collapse
Hey snark_be,
I'm not sure, it's a brand new T-Mobile that I got in a sealed box. The owner got it as an upgrade but didn't want it. So it came locked to T-Mobile and I had to unlock it since I'm not a T-Mobile customer.
Could T-Mobile be using this tracking method? The seller of the unlocker could have added it, I don't know, he hasn't answered my email (yet).
The SMS goes anytime the device boots, not just after inserting the SIM.
HTC ROM upgrade site rejects my serial number if I want to download a new ROM.
Addicteddddd said:
yea sounds like some program like remotetracker, try flashing a new ROM, as i assume it's build into the ROM by the seller, no idea why though.
Click to expand...
Click to collapse
That was the plan, but that seem's a bit of a hornet's nest. Can I assume safely that the T-Mobile is a true HTC Touch Diamond? Will I be able to return to non-brick if something doesn't work? I mean when I install Hard-SPL first (it's installed already by the unlocker, but an older version, like 1.24)?
kowalsky_tom said:
Hi,
I think that every HTC Diamond and MDA Compact IV sends those texts when logging into GSM Networks, but not every network provider shows them on their bills. With T-Mobile it shows on My T-Mobile On-Line account, but not on any paper or electronic bill.
Regards.
Click to expand...
Click to collapse
Tom, they show up on my bill, so I have to pay for them. And my provider logs them as International calls.
I don't have the luxury of sitting idle because it make the device useless as a phone. I will peruse the forum about this matter but I was already planning upgrading the ROM as I find the device very unresponsive.
have a look in the rom section here and install a new one
xdarjen said:
That was the plan, but that seem's a bit of a hornet's nest. Can I assume safely that the T-Mobile is a true HTC Touch Diamond? Will I be able to return to non-brick if something doesn't work? I mean when I install Hard-SPL first (it's installed already by the unlocker, but an older version, like 1.24)?
Click to expand...
Click to collapse
Just flash the latest HardSPL, 1.93 I think, and then head over to the Diamond Wiki and download/flash the newest WWE ROM you find (1.94 I think).
Hello, i got a G1 from my cousin, so i cant use it yet but im the 1st day,
i can still use the "camera, calculator and some of the apps, it happens that i wipe-out the datas. but now i discover to make an update that some1 instructed me to do this.
1. Go here: http://code.google.com/p/android-roms/downloads/list
2. Download this: signed-kila-ota-148830.de6a94ca.zip [8th in the list]
3. Rename it: update.zip
4. Place it on your SD card
5. Put SD card in phone. Reboot holding the Power and home buttons.
6 Apply the update...
7. Done.
but then i cant even still see those apps like camera's bar code reader,
calculator etc.. is there a way to see those? or i now need to get an unlock
pin to activate the phone and see those apps?
my phone is 2weeks nothing to do ><
all i can see is the emergency calls xD
Is it asking you to sign in to google?
I'm not really of your scenario, you're using a t-mobile SIM, right? When I got my G1 I didn't have a t-mobile SIM, so all I could do is use emergency call until I unlocked it. Thing is, when you factory reset your SIM unlock is still retained, so I don't really see how this is possible...
So we can understand what happened.
-The phone worked fine
-you factory reset
-Applied that update
-it's asking for a code
Is it an unlock code (for the SIM) or a gogle sign-in?
AdrianK said:
Is it asking you to sign in to google?
I'm not really of your scenario, you're using a t-mobile SIM, right? When I got my G1 I didn't have a t-mobile SIM, so all I could do is use emergency call until I unlocked it. Thing is, when you factory reset your SIM unlock is still retained, so I don't really see how this is possible...
So we can understand what happened.
-The phone worked fine
-you factory reset
-Applied that update
-it's asking for a code
Is it an unlock code (for the SIM) or a gogle sign-in?
Click to expand...
Click to collapse
First of all thanks for replying bro, its really appreciated
i got my G1 without a T-mobile sim card. so if i put a sim from here
it ask for a pin and also requires me to sign in tio google.
how to fix? or the only way is to get it unlocked?
coz samehere i only can use emergency call xD
so you have an rooted locked g1 and you what? Hard to follow the conversation
If you're not on tmobile you need to purchase an unlock code, you can buy them on ebay for about $15/£10. They will ask for your IMEI. Never publicly post your IMEI. If you see one really really cheap, make sure they are going to give you the code, rather than tell you how to unlock.
After thatyou need apn settings for your carrier, press menu, enter those and sign in.
cmsweet21 said:
First of all thanks for replying bro, its really appreciated
i got my G1 without a T-mobile sim card. so if i put a sim from here
it ask for a pin and also requires me to sign in tio google.
how to fix? or the only way is to get it unlocked?
coz samehere i only can use emergency call xD
Click to expand...
Click to collapse
if your phone isnt unlocked and you dont have the unlock code, DO NOT PUT IN A FAKE UNLOCK CODE!!! YOU WILL PERMANENTLY LOCK IT!
follow these instructions
http://forum.xda-developers.com/showthread.php?t=452316
AdrianK said:
If you're not on tmobile you need to purchase an unlock code, you can buy them on ebay for about $15/£10. They will ask for your IMEI. Never publicly post your IMEI. If you see one really really cheap, make sure they are going to give you the code, rather than tell you how to unlock.
After thatyou need apn settings for your carrier, press menu, enter those and sign in.
Click to expand...
Click to collapse
Thanks for those replies peepz.
btw, what will i do is i will call my cousin who gave me this G1 (coz he lives in USA )
I will ask him a favor to get me a "UNLOCK PIN" for the G1 then i will give my IMEI to him.
and hopefully will get the code after a days.
When it Success, what will i do next? i will need "APN Settings"? i dunno that yet xD.. where can i find the settings? and will i need to have wifi connection?
thanks in advance.
Bump! Bump! Bump!
cmsweet21 said:
Thanks for those replies peepz.
btw, what will i do is i will call my cousin who gave me this G1 (coz he lives in USA )
I will ask him a favor to get me a "UNLOCK PIN" for the G1 then i will give my IMEI to him.
and hopefully will get the code after a days.
When it Success, what will i do next? i will need "APN Settings"? i dunno that yet xD.. where can i find the settings? and will i need to have wifi connection?
thanks in advance.
Click to expand...
Click to collapse
did your cousin originally have tmobile? what he can do is call tmobile and say that he sent his g1 overseas to his cousin as a present... jus tmake sure you tell him the IMEI number found on the back of the phone when u take out the battery first before he calls tmobile..
tmobile will give him the unlock code thru email within 24hours.
if he didnt have tmobile then the only thing u can do is buy the unlock code.preferably ebay.
a lot of apps use data. so apps that use internet and such will not work since there is no SIM in it. u need a sim with a data plan. but u can use the phone over wifi. no calls but download from market and browse the web.
PM me so i can walk u thru. more things.
brian_v3ntura said:
did your cousin originally have tmobile? what he can do is call tmobile and say that he sent his g1 overseas to his cousin as a present... jus tmake sure you tell him the IMEI number found on the back of the phone when u take out the battery first before he calls tmobile..
tmobile will give him the unlock code thru email within 24hours.
if he didnt have tmobile then the only thing u can do is buy the unlock code.preferably ebay.
a lot of apps use data. so apps that use internet and such will not work since there is no SIM in it. u need a sim with a data plan. but u can use the phone over wifi. no calls but download from market and browse the web.
PM me so i can walk u thru. more things.
Click to expand...
Click to collapse
yea actually its a present.. i try to ask him to call tmobile as soon as i got a chance to call him.
ur reply is highly appreciated bro. tyvm
anything u can offer me? any tips/tricks? heh tytyty
dumba$$
ifits t-mobile andits still askingforur sim pin its not asing for an unlock pin
GSAI029 said:
ifits t-mobile andits still askingforur sim pin its not asing for an unlock pin
Click to expand...
Click to collapse
nope, i dont have t-mobile sim. ><
BUMP BUMP!!!
cmsweet21 said:
BUMP BUMP!!!
Click to expand...
Click to collapse
Its unnecessary to bump unless you have the unlock code cuz there's not much we can help you with until then.
Hello I just bought a LG optmius 2X from fido and i have went out and got an unlock code ( yes i made sure i had the correct iemi number) BUT here is what happend
I went to the dialer typed in 2945#*990# brings the unlock panel so i begin typing my code the first one went quickly and the phone quickly restarted so i thought yay i did it so i threw in a rogers sim but to my suprise nothing happend.. so i tryed again with a bell sim and once again nothing happend so now i was checking the imei number and that matches with the unlock codes so i have no clue what im doing wrong as well i tryed all the other codes that i was sent with no luck as well
what am i to do?
PS When booted up it says NO SIM as well i have NEVER had a accutal fido sim card in the phone as well i have updated to android 2.3 and that effected nothing
207 views yet no help
Sent from my LG-P990hN using XDA
If you're not getting replies it's because nobody that has seen this yet knows how to help (me included).
In my case it was quite simple as the companies over here are forced to give the unlock codes, all I did was put a SIM from a company other than what I had (as said on the instructions) and then bring the unlock menu and enter the code.
Don't know if using a different SIM before unlocking is necessary because of the model itself or just the company I was using, it wouldn't hurt trying that way so put another sim first and then bring the unlock panel.
Thank you very much for the reply. I have tryed two other sim cards. both givethe same result now isthere a way to check if the phone is ulocked not buy puting in an new sim? Also the phone has never had a fido sim in it could this cause problems?
hidequick said:
Thank you very much for the reply. I have tryed two other sim cards. both givethe same result now isthere a way to check if the phone is ulocked not buy puting in an new sim? Also the phone has never had a fido sim in it could this cause problems?
Click to expand...
Click to collapse
The easiest way to check is using a non accepted sim card and getting network. I don't think never have used a fido sim is the issue.
I just want to be sure you're doing the steps right,
1.- Insert a non accepted sim and start the phone, when the phone has loaded you should see the message "locked network/sim" (don't know exactly what it says in english)
2.- Dial the sequence 2945#*990# or 2945#*999# and then input the unlock code, you should get a message saying the request to unlock the phone was successful (again, or something like that) and then the phone will restart
3.- Once it loads again, you should see the name of the network provider and have signal.
Now try again, and tell exactly where it's going different for you to see if someone can help you, if not there's always the option to unlock by software.
Thank you but i get an error when i send the unlock code says networking error of.somthing also is softweare unlocking easy to do?
Sent from my LG-P990hN using XDA
looking at the end of topic
http://forum.xda-developers.com/showthread.php?t=1701939
I have gone back to stock 2.2.2 fryo and it still does not want to unlock.
sorry for the dubble post but here is a video of my problem yes this is me http://www.veoh.com/watch/v33213769CCkKgRTz
hidequick said:
sorry for the dubble post but here is a video of my problem yes this is me http://www.veoh.com/watch/v33213769CCkKgRTz
Click to expand...
Click to collapse
Try the code SPCK instead of whichever you're using.
would like you to know i have tryed all codes but i will give it a shot on 2.2
EDIT: tryed all codes recived none work and I HAVE been told these codes work.
ALSOi have a few other topics around the fourms asking about my problem and no one knows whats going on they all have 300+ views even! I have stumped the entire fourm!?