Related
Ok probably nobody has noticed but this link is down:
https://android.clients.google.com/updates/partner/signed-kila-ota-148830.de6a94ca.zip
I cannot find the update for non custom firmware phones and I am tired of waiting for OTA. Anybody have the file?
so just root and download a custom rom and install that. it takes a grand total of 20 minutes.
frankd14321 said:
Ok probably nobody has noticed but this link is down:
https://android.clients.google.com/updates/partner/signed-kila-ota-148830.de6a94ca.zip
I cannot find the update for non custom firmware phones and I am tired of waiting for OTA. Anybody have the file?
Click to expand...
Click to collapse
I just uploaded to my Mediafire for you.
http://www.mediafire.com/?sharekey=8d05282eb68bc06484e7dd3ec6e24165f54d6a80f0f2e9dbce018c8114394287
Thank you so much!
Umm.. it was rooted and now I am going back.
how to
need instructions on how to execute this
1. rename the file to update.zip (make sure thats all, not update.zip.zip. for example, if youre looking at it on your desktop and all it says is "TMO cupcake", do not rename it update.zip, just rename it update.)
2. put the update.zip on your SD card (NOT IN A FOLDER)
3. Reboot your phone into recovery mode (power off then hold home+power)
4. when you see a screen wits a triangle on it, you're there. open your keyboard and hit alt+s. when it finishes, it should automatically reboot. if not, you can reboot manually.
5. you're updated to cupcake. enjoy.
*Update: These instructions now seem to be outdated. I will started an updated thread here: http://forum.xda-developers.com/showthread.php?t=648045
------------
(sorry I tried to post some live links, but the forum won't allow them cause I'm a new user, so this may not be as helpful as I hoped...)
I just spent some hours wading through the forums to find complete instructions for installing the newer android builds using the WM haret.exe linux booter (rather than flashing the entire phone and loosing WM) on my touch Vouge.
I am a bit of a newb, but since I did not find complete instructions, and had to figure some things out using trial and error I thought I would post what I did figure out here in hopes of helping others.
First ignore the install instructions here. sourceforge.net/apps/trac/androidhtc/wiki/HowToInstall . They are old and need to be updated.
Erase all previous android files from your sd card
Go here: sourceforge.net/projects/androidhtc/files/
haretinstall.zip
open the zip and place the andboot folder and all its contents on the / directory of your SD card
then download eclair252_androidinstall.zip
unzip eclair252_androidinstall.zip to get androidinstall.tar
copy androidinstall.tar to your sdcard /andboot folder
(unnecessarily steps deleted - see below)
Then on your phone's file explorer run haret.exe from /andboot folder on you sd card
click run and immediately hold the volume switch up as linux boots
the boot menu appears. choose install
if the installation hangs hold volume up again, and choose quit
As I said I'm new at this, so my instructions may be off or misguided. If so please post with corrections. I just know I was looking for a guide like this and couldn't find one so hope this helps someone.
umbilicalbungee said:
(sorry I tried to post some live links, but the forum won't allow them cause I'm a new user, so this may not be as helpful as I hoped...)
I just spent some hours wading through the forums to find complete instructions for installing the newer android builds using the WM haret.exe linux booter (rather than flashing the entire phone and loosing WM) on my touch Vouge.
I am a bit of a newb, but since I did not find complete instructions, and had to figure some things out using trial and error I thought I would post what I did figure out here in hopes of helping others.
First ignore the install instructions here. sourceforge.net/apps/trac/androidhtc/wiki/HowToInstall . They are old and need to be updated.
Erase all previous android files from your sd card
Go here: sourceforge.net/projects/androidhtc/files/
download basefiles.zip
open the zip and place the andboot folder and all its contents on the / directory of your SD card
then download eclair252_androidinstall.zip
unzip eclair252_androidinstall.zip to get androidinstall.tar
copy androidinstall.tar to your sdcard /andboot folder
then download vogueeclairnbh.zip
unzip vogueeclairnbh.zip to get VOUGIMGx480.NBH
copy VOUGIMGx480.NBH to your sdcard /andboot folder
Then on your phone's file explorer run haret.exe from /andboot folder on you sd card
click run and immediately hold the volume switch up as linux boots
the boot menu appears. choose install
if the installation hangs hold volume up again, and choose quit
As I said I'm new at this, so my instructions may be off or misguided. If so please post with corrections. I just know I was looking for a guide like this and couldn't find one so hope this helps someone.
Click to expand...
Click to collapse
Actually, you just answered my question (which I never posted) about NoRootFS.... Thanks for posting this!!!!
THANK YOU!!!
can you explain what is the benefits of doing it this way compared to the way its always been for me. it was as simple as downloading the sqsh package zip file from my favorite build here. witch included all the files i needed to run anroid. I copied the android folder from the zip file to the root of my sd card and simply ran haret exe. It used to be complicated but not now that most builds include all the basefiles needed for boot. I never had to hold any volume buttons or install anything. i probably look dumb for asking this.
incubus26jc said:
can you explain what is the benefits of doing it this way compared to the way its always been for me. it was as simple as downloading the sqsh package zip file from my favorite build here. witch included all the files i needed to run anroid. I copied the android folder from the zip file to the root of my sd card and simply ran haret exe. It used to be complicated but not now that most builds include all the basefiles needed for boot. I never had to hold any volume buttons or install anything. i probably look dumb for asking this.
Click to expand...
Click to collapse
Although I have not yet tried myself because I have a Polaris and WiFi is not yet working, my understanding is that NoMoRootFS makes more space available for the ROM and makes it easier for developers to roll out updates. In the thread for Myn's (most excellent) Warm Donut, there are several themes and updates that can only be applied to Rev2 if you have installed via NoMoRootFS.
umbilicalbungee said:
First ignore the install instructions here. sourceforge.net/apps/trac/androidhtc/wiki/HowToInstall . They are old and need to be updated.
Erase all previous android files from your sd card
Go here: sourceforge.net/projects/androidhtc/files/
download basefiles.zip
open the zip and place the andboot folder and all its contents on the / directory of your SD card
then download eclair252_androidinstall.zip
unzip eclair252_androidinstall.zip to get androidinstall.tar
copy androidinstall.tar to your sdcard /andboot folder
[*]then download vogueeclairnbh.zip
[*]unzip vogueeclairnbh.zip to get VOUGIMGx480.NBH
[*]copy VOUGIMGx480.NBH to your sdcard /andboot folder
Then on your phone's file explorer run haret.exe from /andboot folder on you sd card
click run and immediately hold the volume switch up as linux boots
the boot menu appears. choose install
if the installation hangs hold volume up again, and choose quit
Click to expand...
Click to collapse
I think that this step is not needed. The NBH files were made for flash your phone. If you run Haret is not needed.
Am I right?
ryomahino said:
I think that this step is not needed. The NBH files were made for flash your phone. If you run Haret is not needed.
Am I right?
Click to expand...
Click to collapse
correct. with the OP method, the .nbh file is just taking up space. you never need to do anything with a .nbh file if you are using haret. OP, please fix and I will add to my list of FAQs, otherwise very informative. thx.
Help
I can't get this to boot on my Vogue. The black Linux screen pops up & starts running but stops. The last line says...
[ 2.226233] Rebooting in 3 seconds.._
I've followed your instruction to the letter & can't see to get it to work. Anyone have suggestions?
Emmie0702 said:
I can't get this to boot on my Vogue. The black Linux screen pops up & starts running but stops. The last line says...
[ 2.226233] Rebooting in 3 seconds.._
I've followed your instruction to the letter & can't see to get it to work. Anyone have suggestions?
Click to expand...
Click to collapse
Did you get into the install menu by holding volume up? easiest and quickest way to help you is if you describe exactly what you did - I know it is similar to the OP, but just give a step by step in your own words.
I did all of the steps but linux boot stops at : failed to reach system.img on SD Card...
tatnai said:
Did you get into the install menu by holding volume up? easiest and quickest way to help you is if you describe exactly what you did - I know it is similar to the OP, but just give a step by step in your own words.
Click to expand...
Click to collapse
Did didn't get past the Linux menu. It only ran for about 4 or 5 seconds then locked up. I had to soft reset to get my phone functioning again.
I did exactly what the instructions in the 1st post said to do.
Downloaded andboot file to \storage card\andboot
Downloaded androidinstall.zip & placed in the andboot file
Clicked haret.exe
Selected run while holding up the volume key
I read in the post that the below items were not necessary so I skipped them:then download vogueeclairnbh.zip
unzip vogueeclairnbh.zip to get VOUGIMGx480.NBH
copy VOUGIMGx480.NBH to your sdcard /andboot folder
I'm running stock rom. My carrier is nTelos (CDMA).
I notice that your rom version and radio version are not the latest. You may have to ungrade those before you can get it to run.
Emmie0702 said:
Did didn't get past the Linux menu. It only ran for about 4 or 5 seconds then locked up. I had to soft reset to get my phone functioning again.
I did exactly what the instructions in the 1st post said to do.
Downloaded andboot file to \storage card\andboot
Downloaded androidinstall.zip & placed in the andboot file
Clicked haret.exe
Selected run while holding up the volume key
I read in the post that the below items were not necessary so I skipped them:then download vogueeclairnbh.zip
unzip vogueeclairnbh.zip to get VOUGIMGx480.NBH
copy VOUGIMGx480.NBH to your sdcard /andboot folder
I'm running stock rom. My carrier is nTelos (CDMA).
Click to expand...
Click to collapse
Stevevo said:
I notice that your rom version and radio version are not the latest. You may have to upgrade those before you can get it to run.
Click to expand...
Click to collapse
always good to have latest radio. i don't know if it will interfere with you booting linux, usually it creates problems with gps or data once you are in android. but who knows, anything is possible I suppose.
list the files that are in /sdcard/andboot/ emmie0702
I've always wanted to update me ROM but there is not a Server cab out there that will give me back my settings for nTelos. Its a small cell network therefore no one has bothered to create one (I really can't blame them). So I've never tried it out of fear of Bricking my phone. For some reason nTelos did not offer WiFi, GPS or MMS with this phone through their network (didn't know that until AFTER I bought it). They have it for other phones but not this one for some reason. That was a little annoying when I 1st got it but I've leaned to live without it. I love my phone even w/o those things. I get pics emailed to me & can email them to other's phone through their carrier address (eg [email protected]). WiFi would be nice but I never use GPS. As far as the Radio. I assume it sort of the same step. I pretty much have to install it & it will wipe out or "Hard Reset" my phone, right...causing me to losing all my network info?
Here are the files I have in the andboot folder:
androidinstall
default
haret
initrd
READE-BASEFILES
zImage
zImage-eclair
** I could not file the "eclair252_androidinstall.zip" file to download so I downloaded the androidinstall.zip under the "2010-01-05" folder from sourceforge.net/projects/androidhtc/files/. Could that be the problem or could it be a combination of my Radio/ROM & the androidinstall tar I downloaded?
Thanks for the help guys!
is it androidinstall.zip or androidinstall.tar?
tatnai said:
is it androidinstall.zip or androidinstall.tar?
Click to expand...
Click to collapse
File Name: androidinstall
File Type: WinRAR archive (.tar)
Emmie0702 said:
I've always wanted to update me ROM but there is not a Server cab out there that will give me back my settings for nTelos. Its a small cell network therefore no one has bothered to create one (I really can't blame them). So I've never tried it out of fear of Bricking my phone. For some reason nTelos did not offer WiFi, GPS or MMS with this phone through their network (didn't know that until AFTER I bought it). They have it for other phones but not this one for some reason. That was a little annoying when I 1st got it but I've leaned to live without it. I love my phone even w/o those things. I get pics emailed to me & can email them to other's phone through their carrier address (eg [email protected]). WiFi would be nice but I never use GPS. As far as the Radio. I assume it sort of the same step. I pretty much have to install it & it will wipe out or "Hard Reset" my phone, right...causing me to losing all my network info?
Here are the files I have in the andboot folder:
androidinstall
default
haret
initrd
READE-BASEFILES
zImage
zImage-eclair
** I could not file the "eclair252_androidinstall.zip" file to download so I downloaded the androidinstall.zip under the "2010-01-05" folder from sourceforge.net/projects/androidhtc/files/. Could that be the problem or could it be a combination of my Radio/ROM & the androidinstall tar I downloaded?
Thanks for the help guys!
Click to expand...
Click to collapse
you should be able to update your radio without touching your rom, there is a radio only version of 3.42.50, see the faqs noob guide to flashing, it is in there.
I am unsure what you downloaded; it looks like you have the right basefiles, but if you got androidinstall.zip from 2010-01-05 I don't think it will have anything compatible with the norootfs method, and is probably causing your problem.
delete androidinstall.tar, download this and drop the androidinstall.tar that is inside into your sdcard/andboot/ folder. then run haret and keep holding volume up until you see the install menu. then post back.
tatnai said:
you should be able to update your radio without touching your rom, there is a radio only version of 3.42.50, see the faqs noob guide to flashing, it is in there.
I am unsure what you downloaded; it looks like you have the right basefiles, but if you got androidinstall.zip from 2010-01-05 I don't think it will have anything compatible with the norootfs method, and is probably causing your problem.
delete androidinstall.tar, download this and drop the androidinstall.tar that is inside into your sdcard/andboot/ folder. then run haret and keep holding volume up until you see the install menu. then post back.
Click to expand...
Click to collapse
OK. Same thing...phone locks up at the same place. I downloaded the file you attached & downloaded the VOGUIMG.nbh file that was linked on PPCGeeks. I followed the instructions on PPCGeeks post "This is the vogue radio 3.42.50 designed for the vogue (this is not the titan port). I removed it directly from the bell rom and recomplied it as a radio only .nbh. This is a radio only rom designed to be flashed from bootloader from sd card and doesn't require a hard reset. Copy VOGUIMG.nbh to root of fat32 micro sd card 2gb or less and place phone in bootloader and it will run."
I still get the same outcome. Both your attachment & the VOGUIMG.nbh file are located \Storage Card\ on my phone. When the Radio instructions say its designed to be flashed from Bootloader what exactly does that mean? Do I need a program for that or is it suppose to start when I Run the default.txt after I select haret in the andboot folder?
the place you got the link to the radio only version also has instructions on how to flash your phone - see the before starting area. short: get into bootloader mode, then flash.
I still think there is something else that you are doing wrong, I just can't put my finger on it right now; i'm hoping others will be able to help.
tatnai said:
the place you got the link to the radio only version also has instructions on how to flash your phone - see the before starting area. short: get into bootloader mode, then flash.
I still think there is something else that you are doing wrong, I just can't put my finger on it right now; i'm hoping others will be able to help.
Click to expand...
Click to collapse
OK. I figured out how to get it in bootloader mode (power button + camera + soft reset). The Red/Blue/Green screen pops up & then a Grey screen that says "loading...". Its been "loading" for over 5 minutes now. What could be the problem?
Hello people.
I have minor problem over here, I have flased my rom before but in a different way Through the xperia x1 phone with the usb cable in, all I had to do was to install a file through the pc.
But there is another way Id like to do it now, I have a .image file and have renamed it to "kovsimg.image" and I did also install HARD_SPL before.
To make it easier for u to help me.
1. Install hard spl
2. put the kovsimg.image into the memory card
5. Remoed the USB cable
3. turned of the phone
4. Pressed down lower sound and on/off button together (I got to the correct place where there are different colors.
5. Image file not found!
At nr 5., that is where the problem is. Why does it say Image file not found?
I have also tried with .nbh file 2, occuring the same problem though.
Thanks!
The filename should be "kovsimg.nbh"
sweflo said:
The filename should be "kovsimg.nbh"
Click to expand...
Click to collapse
But in another thread that is sticky, said that it can both me .nbh and .image
So the fact that was said is wrong I guess?
Well that will not either fix the problem, before the .image I tried with a kovsimg.nbh file and had the same problem.
Thanks
Make sure the filesize is the same so you have copied the all of the file "kovsimg.nbh"
happens to me sometimes that there is missing a few megabytes and the phone dont find a image..
sweflo said:
Make sure the filesize is the same so you have copied the all of the file "kovsimg.nbh"
happens to me sometimes that there is missing a few megabytes and the phone dont find a image..
Click to expand...
Click to collapse
Im sorry but how exactly do you mean?
If you mean that the "whole" file maybe didnt get copied into the mem card?
It thats what u mean, I just checked it and both files are 213mb so :S
Check the spelling "kovsimg.nbh" and copy the file from the computer again
sweflo said:
Check the spelling "kovsimg.nbh" and copy the file from the computer again
Click to expand...
Click to collapse
Atm I am downloadin a new Rom instead, there could be wrong this this I did download..
Btw, just a simple question. If I already have flashed a rom, is it possible to flash over a other rom?
I tried to make hard_spl over the one the Rom I already have, but no difference Well I will come back with information on how it went when I am complete with the download.
Thanks for takin ur time dough
Freak174 said:
Atm I am downloadin a new Rom instead, there could be wrong this this I did download..
Btw, just a simple question. If I already have flashed a rom, is it possible to flash over a other rom?
I tried to make hard_spl over the one the Rom I already have, but no difference Well I will come back with information on how it went when I am complete with the download.
Thanks for takin ur time dough
Click to expand...
Click to collapse
You only hard_spl ones, you can make so many flashings you want but remember to do a hardreset after flashing..
did u try to search the forum?
http://forum.xda-developers.com/showthread.php?t=469300
boy, you really haven't read the stickys or haven't understand them fully...
just be glad that this flash-process is pretty stable and it's almost impossible to brick one's phone beyond revival.
read them again!
but to summarize it:
- you only have to do hard-spl once. until you flash stock-spl (that's not stock-rom!) it remains there forever.
- regardless if flashing via usb or microsd, the filetype has to be .nbh
- looks to me as if you didn't change the filetype of the image, but just the filename. so it actually is "kovsimg.nbh.image" right now, which will not be accepted by bootloader (the tricolor-screen-thingy).
check these two things before flashing again:
1. check if hard-spl was successfull:
take your sd-card out, and enter bootloader. it will now stay on tricolor screen. there it should read "SPL-0.72.OliNex". (among other stuff)
if it reads "SPL-0.72.0000" or "78" you haven't succeeded in hard-spl -> read the sticky again.
2. check the filetype of your image-file:
get your windows to show filetypes (how depends on which version, google it) and make sure the file's name is really just "kovsimg.nbh", nothing more.
(via usb-cabel it has to be "ruu_signed.nbh", btw)
put the kovsimg back on your sd-card (directly to root, meaning not into a folder), put it back in and enter bootloader again. follow the instructions on screen.
if you followed these instructions correctly, it will work now.
to flash any other roms in the future you just have to name the file right and put it on your sd-card -> bootloader. (again, hard-spl will not be needed.)
after flashing finished do a hard-reset! when flashing via sd you have to take the battery out and back in to do a restart. that's the perfect moment:
- take battery out
- put it back in
- press and hold (!) the two silver-buttons under the screen
- press the power-button shortly (while still holding the two silver ones!)
- phone will vibrate and enter a white screen
- release the two buttons and follow instructions on screen
When you downloaded the ROM did you make sure to extract it first with either WinZIP or WinRAR before you renamed the file? ALL ROMs are compressed usually with WinRAR to save time uploading. Then you download and extract the file. Then you rename the image file to the respective name on how you wish to flash your phone.
Thanks for the replies but the problem is still here :/
I checked the bootloader and it said "SPL-0.72.OliNex", which means I have installed the HARD_SPL correctly.
Atm I have Energys rom installed, but I didnt install it the same way as this way I am trying to do now. I just had to have the cable checked in and follow an installation and it was done.
Right now I have tried with several roms but none has worked, for the moment I am trying to get this rom to work "Valkyrie_v3.8 FireStorm" without success ofcourse..
I did everything correct, I know that I have. I also followed a video guide to check I made it correct.
The file name is kovsimg.nbh (Ive checked it and it is a .nbh file, my brother also confirmed it).
When I try to flash it, the USB cable is out, the phone is shut (tried to pull out the battery 2), but still the same problem "No image file!".
And yes, I did first extract the file. The size has the same amount as in the winrar file so nothing is missin. After that I changed the file name and copied it into the root of Memory card.
PS. Is this the only way to flash it, I mean is it not possible to do the same way as I did with energy's? (Its the same way as installin HARD_SPL)
Try using a different SD card.
Im Packing said:
Try using a different SD card.
Click to expand...
Click to collapse
Befor this make sure your microSD is Formatted to fat32 using a PC. If not, it will not work.
or you could just do it the same way as the energyrom
i.e. customRUU.exe
well, sounds like it's your sd-card. probably formating it again with fat32 will help. there are also reports of some sd-models/brands not working at all. there's a thread for this by gtrab, i think. although there it says "kingston" cards don't work at all - i'm flashing with a kingston 8gb for almost a year now... ^^)
if you choose to get customruu.exe for usb-flash DON'T use the one from hard-spl, that's a special one.
try remove SD card and flash without PC
The SD-cards format is Fat32, but I used a different way this time by doing as Jonny~ mentioned and it worked all fine!
Thanks for the help, great service.
Take care and wish me luck in the future with my xperia
Hey all, I'm currently in RA after flashing the recovery image , and I'm trying to install the FRESH rom on there but for some reason when I try to "Flash zip from sdcard" it's telling me "No zip files found." Why is that? I have the whole zip folder placed in the main SD card, so why is it telling me it's not found?
BOOGIE_BOTZ said:
Hey all, I'm currently in RA after flashing the recovery image , and I'm trying to install the FRESH rom on there but for some reason when I try to "Flash zip from sdcard" it's telling me "No zip files found." Why is that? I have the whole zip folder placed in the main SD card, so why is it telling me it's not found?
Click to expand...
Click to collapse
I responded to you on http://GeekFor.Me, but the reason is because RA looks in the root of sdcard, the zips can't be inside of any folders.
So does that mean I have to take out all the individual files and place them directly into the root of the sdcard? Because I just basically copied the download folder and dropped it into the root. Thanks for the reply
BOOGIE_BOTZ said:
So does that mean I have to take out all the individual files and place them directly into the root of the sdcard? Because I just basically copied the download folder and dropped it into the root. Thanks for the reply
Click to expand...
Click to collapse
You need to leave the files in a .zip, but yea that zip needs to be on the root of the sdcard.
The only file you need to install the rom is fresh-cdma-hero-20d.zip (for fresh rom 2.0d). Any other zips are just addons or tweaks or whatever they may be.
flipzmode said:
You need to leave the files in a .zip, but yea that zip needs to be on the root of the sdcard.
The only file you need to install the rom is fresh-cdma-hero-20d.zip (for fresh rom 2.0d). Any other zips are just addons or tweaks or whatever they may be.
Click to expand...
Click to collapse
Hmm, I'm on a Mac and maybe it's me but the link I download from gives me an actual folder rather than a zip. And when I rename the folder to a zip, it gives an error. Is there a mirror link to download an actual zip folder?
Boogie when you download it dont opening after it finishes downloading .. just use the finder to navigate to where its at and then copy that to your sd .. when you open it on a mac it will automatically create the extracted folder .. hope this helps ...
Sounds like your using Safari to download it. To make this easier in the future go to Safari > Preferences > General and make sure that "Open safe files after downloading" is NOT check-marked.
Safari is unpacking the zip file for you. The file you want is in your trash bin, drag it to the root of your SD card and that's it..
Ok I'm gonna give it another go. Since I made it all the way through to the RA stage, there's no reason I shouldn't be able to flash the rom is there?
Thanks for all the help everyone I finally got it to flash the FRESH rom, but once I rebooted it, it's still in the "HTC" branded screen. Is it loading? It's not going anywhere but this screen, although I know it's doing something because the animation shine is moving.
BOOGIE_BOTZ said:
Thanks for all the help everyone I finally got it to flash the FRESH rom, but once I rebooted it, it's still in the "HTC" branded screen. Is it loading? It's not going anywhere but this screen, although I know it's doing something because the animation shine is moving.
Click to expand...
Click to collapse
After flashing a new ROM, it can take up to 10 minutes or so to load.
Nice Everything is all good! Now my last question is how do I get the removed apps from the ROM back onto here? I actually prefer to have some of those programs back onto the phone.
BOOGIE_BOTZ said:
Nice Everything is all good! Now my last question is how do I get the removed apps from the ROM back onto here? I actually prefer to have some of those programs back onto the phone.
Click to expand...
Click to collapse
There is a link in the release notes to download all the removed apk's from Fresh Rom. You will then need to use adb push to push them back to /system/app. Search for how to setup adb on a mac as I honestly don't know.
My Top screen of my phone literally just slide off the bottom, So I need to send it back in to get a new one, But my charging port wont let my phone sync with my computer for some reason. So can someone please convert this new ROM from http://www.htc.com/us/support/tilt-2-att/downloads/ so I can flash it with my SD card and return it soon!
Dragonmaster0430 said:
My Top screen of my phone literally just slide off the bottom, So I need to send it back in to get a new one, But my charging port wont let my phone sync with my computer for some reason. So can someone please convert this new ROM from http://www.htc.com/us/support/tilt-2-att/downloads/ so I can flash it with my SD card and return it soon!
Click to expand...
Click to collapse
All You Have To Do Is Download The Rom From The Url You Posted Then When You Have It On Your Computer Right Click On It & Select Extract Files Then Open The Folder That Gets Extracted & Find RUU_signed.nbh & Rename It RHODIMG.nbh Then Put It On Your Storage Card & Flash & You Should Be Good To Go
Flashing Via MicroSD Card
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the Rhodium Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to RHODIMG.nbh
4. Copy the RHODIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
I Hope This Helps!!!
if your sending it back to your service provider they dont really check the rom they focus the issue and the flash it back to there settibg. my friend and i have done it without the stock rom
groove6969 said:
if your sending it back to your service provider they dont really check the rom they focus the issue and the flash it back to there settibg. my friend and i have done it without the stock rom
Click to expand...
Click to collapse
Rlly? cause I was told if any software is found on the phone when its sent back,ill be charged for a full price?
If you are on AT&T, you have to restore the stock ROM or you will be charged. You also need to restore the SPL.
Problem
I flashed abck to default stock rom some time agon and they voided my warranty just because id didnt return to stock spl. They are full of nonsense over here
i have done numbers of returns of from tilt 1 too the fuze and the tilt 2 for warranty exchange and never had a problem but if u feel confortable follow the steps from the previous post to conver the file over just extract the file and then convert the name over to rhodimg for the nbh filr and put to ur main root of the sd card and flash it that way it will install the stock rom
Doo Doo said:
All You Have To Do Is Download The Rom From The Url You Posted Then When You Have It On Your Computer Right Click On It & Select Extract Files Then Open The Folder That Gets Extracted & Find RUU_signed.nbh & Rename It RHODIMG.nbh Then Put It On Your Storage Card & Flash & You Should Be Good To Go
Flashing Via MicroSD Card
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the Rhodium Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to RHODIMG.nbh
4. Copy the RHODIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
I Hope This Helps!!!
Click to expand...
Click to collapse
When I right-click on it, i dont get a option for "Extract"
Dragonmaster0430 said:
When I right-click on it, i dont get a option for "Extract"
Click to expand...
Click to collapse
Are You Right Clicking On This RUU_Rhodium_S2_Cingular_US_2.10.502.4_Radio_Rhodium_4.49.25.95_Signed_Ship.exe ?
Are You Using Winrar To Extract ?
Doo Doo said:
Are You Right Clicking On This RUU_Rhodium_S2_Cingular_US_2.10.502.4_Radio_Rhodium_4.49.25.95_Signed_Ship.exe ?
Are You Using Winrar To Extract ?
Click to expand...
Click to collapse
Umm when I downloaded it from the link I got "HTC_Tilt 2_2.10.502.4.exe"
Did I do something wrong?
I don't have Winrar, my trail expired..I do 7-zip though
Dragonmaster0430 said:
Umm when I downloaded it from the link I got "HTC_Tilt 2_2.10.502.4.exe"
Did I do something wrong?
I don't have Winrar, my trail expired..I do 7-zip though
Click to expand...
Click to collapse
I Don't Think It Matters What The Name Is You Should Still Be Able To Extract The Exe File Download Winrar Again & Try To Extract It
Doo Doo said:
I Don't Think It Matters What The Name Is You Should Still Be Able To Extract The Exe File Download Winrar Again & Try To Extract It
Click to expand...
Click to collapse
ok so I got the file on my SD card, but I forgot the button combo to flash it, I get to the tricolored screen then it takes me to the hard reset. What button combo do i need to flash?
Think i got it!
Just let us know when you need help with flashing back to stock rom btw with the stock rom that was just updated for the AT&T with sense it has a lot of problems so you may want to flash it as soon as you get the replacement.
Dragonmaster0430 said:
Rlly? cause I was told if any software is found on the phone when its sent back,ill be charged for a full price?
Click to expand...
Click to collapse
Just make sure to flash stock rom and respl your phone if you hgarsled it. coz spl voids the warranty.
it doesn't matter how many softwares you have on your phone when i sent my phone i had spbmobile shell installed on it plus nitrogen core player and all the crap so it doesn't really make any difference.
my phone had a little crack near usb and when they asked me i said nothing is wrong with it there is not even a small scratch on my phone