Related
All,
I was wondering if the built in WM6 Voip client can be activated or be put in if it does not yet exist in the WM6 builds.....
Currently I use Fring for my Voip calls, but I would really like to use the built in client for better native support.
Other WM Voip clients are also welcome....
Cheers,
HJ
Had the same problem i thought that the built-in VoIP client ships with WM6 but it didn't find it on my TyTN II, you can download it from here
ftp://xda:[email protected]/WM6VoIP.CAB
you can find the SipCofigTool very nice utility to config VoIP
http://forum.xda-developers.com/showthread.php?t=303493
mrabie said:
Had the same problem i thought that the built-in VoIP client ships with WM6 but it didn't find it on my TyTN II, you can download it from here
ftp://xda:[email protected]/WM6VoIP.CAB
you can find the SipCofigTool very nice utility to config VoIP
http://forum.xda-developers.com/showthread.php?t=303493
Click to expand...
Click to collapse
Hi Mrabie,
Are you still using VOIP? Please confirm if it used the standard dial pad and if it also uses the front speaker?
Cheers!
There's nothing for the Kaiser that uses the front speaker yet.
Do we know what this is? I assume you mean Voice Over IP (WM6 Built in) currently uses the loud speaker.
One would assume the normal phone speaker could be used (since my old Hermes could).
Hi Guys
I am using my company's VoIP service though my TyTn II. Everything is great! And the voice is came out from the ear speaker.
I installed the SIP Config Tool v. 2.0.1 and WM6VoIP.cab
Thank you
lingalan said:
Hi Guys
I am using my company's VoIP service though my TyTn II. Everything is great! And the voice is came out from the ear speaker.
I installed the SIP Config Tool v. 2.0.1 and WM6VoIP.cab
Thank you
Click to expand...
Click to collapse
Same here, works excellent!
has anyone managed to get the native voip client to work on the kaiser?
I can receive a call but not make one.
when trying to make a call ; I get the error "Network service is not available. Try again later."
sometimes it has worked....
Was working perfectly fine on my hermes (imate jasjam)
lingalan said:
Hi Guys
I am using my company's VoIP service though my TyTn II. Everything is great! And the voice is came out from the ear speaker.
I installed the SIP Config Tool v. 2.0.1 and WM6VoIP.cab
Thank you
Click to expand...
Click to collapse
Great!
I have loaded the 2 cabs and have made some minor progress.
If i reboot the Tytn II is says connected for a moment then it goes to 'searching'. This is over the home wifi network.
When i first loaded the cabs and tried to initiate a call, it did show my voip provider in the dial pad, but now i cant replicate that to test it actually works.
What should i do?
Cheers
Edit: it now says 'available' om the today screen, but i cant get it to dial out using the voip connection. Note that i have not set up dial plans yet. but i think i have made good progress so far!
GLO said:
it now says 'available' om the today screen, but i cant get it to dial out using the voip connection. Note that i have not set up dial plans yet. but i think i have made good progress so far!
Click to expand...
Click to collapse
tap on the name , it needs to show as "selected".
let us know if it works for you.
I can only receive calls.
interestingly, nothing ever arrive on the voip server when i try to make a call; i run my own voip server (asterisk) , and no packet ever make it to the server from the windows mobile device...
warning, numbers must be numeric only, no + or # etc...
Do you mean to select it from the 'Today screen'
If that is what you mean, then when i click on it it takes me to the phone settings tab for internet calling.
Mind you, in that tab it states:
Internet Calling
To set the calling network for your next call, select BBPglobal (my Voip account) on the Today screen.
options: whenever available
Only if cellular is not available
Never
I have it set to whenever available and have also enabled GRS/GSM calls as per SIP config 2.01.
Whilst it now always shows that it is available, i dont see how else i can select it.
if you move the cursor in the today screen to go on the voip plugin, press OK (the button, not using the touch screen) you can change the status to "selected"
Forgot to add: your SIP server must support g711 (ulaw or alaw) codec... none of the low-bandwidth codec work
jyavenard said:
if you move the cursor in the today screen to go on the voip plugin, press OK (the button, not using the touch screen) you can change the status to "selected"
Forgot to add: your SIP server must support g711 (ulaw or alaw) codec... none of the low-bandwidth codec work
Click to expand...
Click to collapse
I move the today screen curser to highlight the voip plugin, but nothing happens when i hit OK or press the big silver button in the middle.
Regarding the SIP server sip2.BBPglobal.com does support g711. Well i was thinking that the phone simply makes a connection to the wireless router (Asus WL500gP running DD-WRT v23sp2) and that would be it. I could be wrong but i think this way simply because i replicated the SIP settings from my ATA (Linksys SPA2102).
Plus i would imaging that when using the VOIP over 3G that it connects with the same settings from the SipConfigTool1.02
Have i missed the boat somehow?
can you tell us which version of WM6VOIP.cab you are using - as in my version the sound comes out of the loudspeaker instead of the earspeaker?
any suggestions?
Would be also interresting for me.
I've tested 3 Types of VOIP software.
- Fring => Comes out of the loudspeaker
- Pocket Talk => Comes out of the loudspeaker
- Prop. WM6 => Could not connect.
Kind Regards
Seppl
I can use Fring/X-lite but the sound comes through the speaker. The WM6 native client can logon but not make any calls (same message as the poster above). I think I can receive calls though (but I have not tried).
mrabie said:
Had the same problem i thought that the built-in VoIP client ships with WM6 but it didn't find it on my TyTN II, you can download it from here
ftp://xda:[email protected]/WM6VoIP.CAB
you can find the SipCofigTool very nice utility to config VoIP
http://forum.xda-developers.com/showthread.php?t=303493
Click to expand...
Click to collapse
Hi,
the first link is about Hermes?! I tried it, but it creates two today plugin...why?!
Is it possible that on the latest Kaiser native ROM some parts of WM&VoIP.CAP is already installed even if there is no Internet Tab under Pgone Settings?
Second: I had universal befor and a cooked rom, and when I clicked on the today plugin I could select or unselect voip for calling. With this cab instead, if I click on the today plugin, I enter into Start->Settings->Phone->Internet.
Third: I looked at ftp://ftp.xda-developers.com/Kaiser/VoIP/ and there is a SleuthKaiserVoIP.cab...what is it?? Maybe the WM6VoIP.cab versio for Kaiser?
monakh said:
I can use Fring/X-lite but the sound comes through the speaker. The WM6 native client can logon but not make any calls (same message as the poster above). I think I can receive calls though (but I have not tried).
Click to expand...
Click to collapse
I get the same problem using PocketTalk!
Stefano
snyfer said:
can you tell us which version of WM6VOIP.cab you are using - as in my version the sound comes out of the loudspeaker instead of the earspeaker?
any suggestions?
Click to expand...
Click to collapse
How many versions are there?
Codec ???
What codecs are supported by the built in VOIP? Maybe the issue of not able to make a call could be codec related like in any other VOIP softwares.
- TKN
I was wondering if there was any PC software that I could use to control my windows mobile 6 Kaiser/at&t tilt. I want to be able to control my text messaging specificly. This means I want to be able to type text messages on my PC and they be sent through my cell phone. Is this possible? Thanks all
TheCougar said:
I was wondering if there was any PC software that I could use to control my windows mobile 6 Kaiser/at&t tilt. I want to be able to control my text messaging specificly.
Click to expand...
Click to collapse
You can use MyMobiler, it's free.
There also are some Outlook-Addons like Jeyo, but this one isn't free...
I use SOTI Pocket Controller. its not free but it will let you do everything you normally do through your phone through the pc with a very nice user interface
petervbeck thank you so much. this is perfect. just like my cell phone was an app on my computer and I can use my mouse and keyboard to control it. texting is simple with it. thanks again.
dolbe said:
I use SOTI Pocket Controller. its not free but it will let you do everything you normally do through your phone through the pc with a very nice user interface
Click to expand...
Click to collapse
Is it worth getting Pocket Controller
I Have a Tilt is there diff kinds 1.5/ 1.6
which did u get or which should i get for mine
Link - http://www.soti.net/default.asp?Cmd=Products&SubCmd=PCPro
ilordvader said:
Is it worth getting Pocket Controller
I Have a Tilt is there diff kinds 1.5/ 1.6
which did u get or which should i get for mine
Link - http://www.soti.net/default.asp?Cmd=Products&SubCmd=PCPro
Click to expand...
Click to collapse
I believe the latest version is pocket controller pro v6.01. If your not sure wether to get it or not download the trial first. If you like it buy it. what it does over the other apps similar to this is it uses all the softkey option like you would on your Kaiser plus you can setup hotkeys for spacific applications. I find it especially usefull when I have formatted my Kaiser and reinstalling apps. I makes it so much easier to enter the serial codes through the pc keyboard and you can even install apps without touching your phone aslo. replyiong to texts and emails are made easier, running programs work great also
dolbe said:
I believe the latest version is pocket controller pro v6.01. If your not sure wether to get it or not download the trial first. If you like it buy it. what it does over the other apps similar to this is it uses all the softkey option like you would on your Kaiser plus you can setup hotkeys for spacific applications. I find it especially usefull when I have formatted my Kaiser and reinstalling apps. I makes it so much easier to enter the serial codes through the pc keyboard and you can even install apps without touching your phone aslo. replyiong to texts and emails are made easier, running programs work great also
Click to expand...
Click to collapse
Thank you man
Ill try it out
One more Q out of place but
How do i get online on my laptop
useing my Tilt Phone
can anyone give step by step Instrution Please
Hello,
i would like to know if someone uses float's mobile agent to synchronize with his diamond.
Actually, i use this software for a while with my sony and nokia mobiles...
Now Outlook seems to be the standard soft for Diamond sync...
Diamond works fine with Outlook via ActiveSync, but fma seems not to support it.
Thanks for suggestions
How can we use it if it's not supported
I used to love FMA (being one of the original ideamongers behind it)
I had forgotten about FMA because I haven't used a Sony Ericsson in years but interestingly enough my name is still on the credits of FMA (just checked now)
If it supports the Diamond I would definitely use it because I've always been a fan and it is a great application.
No need to use or install Outlook, just small soft fma
Also, import-export sms and contacts is easy with fma, could be interesting to make it work for diamond...
Would be great !!!
i'd love to use my diamond with this great tool
Long time
is there a free software that is known to do this ?
for example i can do this with my nokia using the nokia suite software.
is there another like nokia suite for htc diamond?
oh by the way my diamond is still kicking
thanks in advance
HD
Yes, there is a program for that. Search and I am sure you will find it
my mobiler.. you have to send from the UI on the phone, however you get it on your computer screen.
thanks for the effort lattiS710
but wouldnt be nice to aleast tell what to search for
HD
chribruu
thank you ill give that a try
Thanks again
HD
When I'm logged on my provider website, I'm able to send sms. Maybe you should try that...
Mymobiler works okay, but a bit slow though because of the screen lag.
Hi,
I use one of the Jeyo products. You can use mobile extender or companion. I think the companion works just great. Do a google search for jeyo and it's the first to pop up.
My Mobiler is the best for me !!
MyMobiler works very fine!
I use pocket controller for this, whit this program you have total controll over your phone, make a bluetooth connection and operate your phone from your pc.
Willem
Wilsas said:
I use pocket controller for this, whit this program you have total controll over your phone, make a bluetooth connection and operate your phone from your pc.
Willem
Click to expand...
Click to collapse
Sounds a bit like Mymobiler, though Mymobiler doesn't have that BT connection option... Would you mind sharing some screen shots of Pocket Controller?
MyMobiler for me.
Although is a little slow but i can put up with it
VerusAmos said:
Sounds a bit like Mymobiler, though Mymobiler doesn't have that BT connection option... Would you mind sharing some screen shots of Pocket Controller?
Click to expand...
Click to collapse
Here a screenshot off Pocket controller, it has a buildin reg editor in it aswell, just install and hit connect
http://84.104.255.96/pocketcontroller/Nieuwe map/index.html
Willem
is it possible to make your phone vibrate on call connect while using the windows default keypad?
i know if i enable the diamond keypad it works.
and also the program "Vibrate On Connect" does not work with the Touch Pro.
I am told it cannot work without the diamond phonepad.
So i'm wondering if anyone can enable it through a .cab file on a non-htc customized 6.5 rom
Have You tried this?
Try Start>Settings>Personal Tab>Phone>Scroll all the way to the right until you see the Advanced tab>Remove the tick from "Vibrate device when connection is established">Click OK until you see your home screen.
TheDempster said:
Have You tried this?
Try Start>Settings>Personal Tab>Phone>Scroll all the way to the right until you see the Advanced tab>Remove the tick from "Vibrate device when connection is established">Click OK until you see your home screen.
Click to expand...
Click to collapse
That tab doesn't exist in WM6.5 with the default dialer.
The only way I know of is to use s2u2 and set it to answer calls and it has an option to vibrate on connect, but I honestly don't use it because I like the built-in lock app in 6.5.
GustavTheLion said:
is it possible to make your phone vibrate on call connect while using the windows default keypad?
i know if i enable the diamond keypad it works.
and also the program "Vibrate On Connect" does not work with the Touch Pro.
I am told it cannot work without the diamond phonepad.
So i'm wondering if anyone can enable it through a .cab file on a non-htc customized 6.5 rom
Click to expand...
Click to collapse
How do you switch between the Diamond dialer and the Windows default dialer? I can only see the Diamond dialer. If I knew how to switch I would look into it to help you.
AdamNimrod said:
How do you switch between the Diamond dialer and the Windows default dialer? I can only see the Diamond dialer. If I knew how to switch I would look into it to help you.
Click to expand...
Click to collapse
Da_G WM6.5 21198 Test 2 ROM has stock dialer. Only HTC based app i've noticed so far is for the camera. You could flash this and check out the fresh new non-htc goodness..
neight said:
Da_G WM6.5 21198 Test 2 ROM has stock dialer. Only HTC based app i've noticed so far is for the camera. You could flash this and check out the fresh new non-htc goodness..
Click to expand...
Click to collapse
Uh, thats that ROM Im already an using.
that option is there because i used Da_G's kitchen and installed the htc dialer because i thought i would like it, however the 6.5 dialer i like better so i used advanced config to switch back.
and yes i like the 6.5 lock much better as well so s2u2 is not an option.
also i downloaded some kind of green button app or something called vibrate which automatically starts when i boot up however never installed, just ran as a .exe and it does what i want- almost- it vibe's on connect however it is a little late and the vibration is too much and not subtle like the htc diamon dialpad one- if anyone can get the vibrate on connect feature from the diamond dialer it would be apprieciated- also how can i stop this new vibrate.exe from running?
Try this and hope you got the fix.
HKLM\Software\HTC\PHONE\PhoneExtendSetting
"ConnectingVibration" set value to 1 to Enable
0 to Disable in Decimal
beastfellow said:
Try this and hope you got the fix.
HKLM\Software\HTC\PHONE\PhoneExtendSetting
"ConnectingVibration" set value to 1 to Enable
0 to Disable in Decimal
Click to expand...
Click to collapse
the value is 1
and not Vibrate after connect
thank you
didnt notice the word "htc" in that registry key? thats for the diamond dialer. does it not work if you install htc dialer and disable it (switch back to standard wm dialer) using something like diamond tweak? or does the tab with the vibrate option disappear with it?
The Jack of Clubs said:
didnt notice the word "htc" in that registry key? thats for the diamond dialer. does it not work if you install htc dialer and disable it (switch back to standard wm dialer) using something like diamond tweak? or does the tab with the vibrate option disappear with it?
Click to expand...
Click to collapse
To return to WM dialer
HKLM\Security\Phone\Skin
set (Enabled) to 0
soft reset
I used Advanced Config v3.3 to revert to the WM 6.5 dialer (which I actually like a lot more than I thought I would), but I also lost the vibrate functionality, which I really enjoy, since where I work my signal fluctuates a lot, and even though I'll show good service on Sprint, it often won't connect, and I'll just hold it in my hand, or put it down on the table and wait for it to actually go to "connected" when I hear/feel the vibrate.
When I go into the Phone options Advanced tab I still have the option to "Vibrate on Connect", but it doesn't work, either checked, or unchecked.
Anyone able to get their phone to vibrate on connect using the WM6.5 dialer?
This isn't a dealbreaker for me, or anything, as I prefer the speedier WM dialer over the delayed HTC dialer (especially when the unit is locked), but it would be nice to get it back.
Vibration on connect
vibration on connect and Slide unlock bugs existent in all cooked ROMs in this forum. I trial all ROMs and found it. If you know the resolves please post it here. thanks
i have the same problem and i would like to know how to fix it ..
thanks all
-Did you try using "Pocket Shield"?, i use it with Da_G 6.5 rom too.
-It's a locking program with amazing options to lock/unlock your device (with light, stylus, slide, gestures)
-AND has the option to vibrate when call connected and is as subtle as de touch pro/diamond dialer. Just a short vibration after the call is engaged.
-Works great for me...
-IT IS NOT FREEWARE though... googleeeeeeee
The solution
Dear my friends ,
here is the solution.
A little CAB for you ;D
Greez,
kvNN_
hi,
have problems for install this cab...
have a error and don't possible install... any idea ?
I have a HTC Diamond and WM 6.5 ROM.