Hi,
I suppose to be doing a big mistake! In order to upgrade italian firmware on my 9090 the proceed was stopped and on the terminal is showed only "USB v.2.06" and trying again the upgrade utility it now show the error as above.
How I can do? kindly, could someone help me ?
thanks in advance
i get this error
ERROR[300]: INVALID UPDATE TOOL
what the **** do i do
Don't shout.......use "search" and you can find it easily!!
But try this file. It should solve your problem.
Flashing roms doesn't always work out perfectly. So what do we do when we get an error during the Rom Update Utility (RUU) update process? Read this!
I have searched several times for explanations of error codes. I finally came across something quite useful. I couldn't find it anywhere in the Blackstone forums nor on the Wiki so I thought I would share it. This is a copy/paste from a thread I found by debonairone and modified slightly.
Here is a list of error codes and possible resolutions when attempting to flash a rom with the RUU:
ERROR [202, 204] : CONNECTION
This error message will appear when the device is not connected to ActiveSync correctly. Make sure you properly connect the device to the PC through ActiveSync before running RUU.
ERROR [206] : MEMORY ALLOCATION
ERROR [280] : UPDATE ERROR
When you see any of these error messages, close other running programs on the computer and run RUU again.
ERROR [208] : FILE OPEN
ERROR [210] : FILE READ
These error messages indicate that RUU lacks certain important files and cannot continue with the update. Please get the complete RUU package again.
ERROR [212] : FILE CREATE
ERROR [214] : FILE WRITE
ERROR [222, 224] : DEVICE NOT RESPONDING
These error messages will appear when remote access control has failed. Check the ActiveSync connection and try running RUU again.
ERROR [220] : MAIN BATTERY POWER
This error message will appear when the device’s battery power is not sufficient. Although RUU will instruct you to plug in the AC adapter, it still has to make sure that your device has enough power to upgrade the radio. (Even when you plug in the AC adapter, the device is unable to charge the battery when it is upgrading the radio).
ERROR [238] : FILE READ
This error message may appear when, for some unknown reason, the ROM image on the phone is corrupt. Download the whole RUU and try again.
ERROR [240] : FILE OPEN
When this error message appears, check whether the downloaded image is placed in the directory of RUU. If, for some unknown reason, you find that the ROM image is not located in the RUU folder, you have to download the RUU and retry again.
ERROR [242] : INVALID LANGUAGE
ERROR [244] : INVALID MODEL ID
ERROR [294] : INVALID VENDOR ID
ERROR [296] : UPGRADE ONLY
One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade. This can also be caused by a mismatch between the CID of the rom you trying to flash and your device.
ERROR [246] : DEVICE NOT RESPONDING
This error message indicates that RUU cannot start the update process. Please contact your service provider for assistance.
ERROR [248~259] : UPDATE ERROR
This error occurs when there is an “open port error” before upgrading the CE ROM image.
Solution: You can reset the device and run RUU again. If you still encounter an “OPEN PORT ERROR” again, reset your computer and try again.
ERROR [260] : CONNECTION
This error occurs when the RUU cannot make a connection to the device right before flashing. This typically only happens when you try to flash a new SPL to your device.
Solution: Use Soft-SPL before attempting the RUU again.
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
ERROR [264, 274] : CONNECTION
ERROR [302~318] : UPDATE ERROR
ERROR [320~328] : INVALID COMMAND
These errors seldom occur. However, if one of these errors occur, it could not be recovered and the device had to be sent back to the customer service center. In this case, you have to flash a new ROM code.
ERROR [300] : INVALID UPDATE TOOL
This error message will appear when you use the incorrect RUU version to upgrade.
ERROR [330] : ROM IMAGE ERROR
This error message will appear when you use the incorrect RUU to upgrade and the image file size is larger than the Flash ROM size. In this case, download the correct RUU version to upgrade.
Reserved for future use.
You know there's a wiki page for this
http://wiki.xda-developers.com/index.php?pagename=RUU_Errors
Dave
DaveShaw said:
You know there's a wiki page for this
http://wiki.xda-developers.com/index.php?pagename=RUU_Errors
Dave
Click to expand...
Click to collapse
Damn it! I couldn't find it... LOL! Can you delete this thread then?
Would you be kind enough to check your and the wiki content and eidt wiki, i will then link it to our home page and trash this thread.
Thanks
HDuser said:
Would you be kind enough to check your and the wiki content and eidt wiki, i will then link it to our home page and trash this thread.
Thanks
Click to expand...
Click to collapse
If that was directed to me, sure I can compare them and make this thread a solid combination of both. But I cannot update the wiki, that I know of at least
cRaCKwHoRe said:
If that was directed to me, sure I can compare them and make this thread a solid combination of both. But I cannot update the wiki, that I know of at least
Click to expand...
Click to collapse
Anyone can change the wiki, just click the "Edit" button at the bottom of the page.
Dave
Wow I feel dumb. I'll take care of it then
Where is the problem ?
sorry wrong threat
HDuser said:
Would you be kind enough to check your and the wiki content and eidt wiki, i will then link it to our home page and trash this thread.
Thanks
Click to expand...
Click to collapse
I updated the wiki. You can trash this. Thanks!
Excellent addition mate to this site. Very informative
Crack can I ask a question? Finally took the plunge and had a go at flashing new rom. got stuck at the first hurdle, Got hit with an "error 262". Not sure if I follow the solution though as I took battery out as it suggested in the RUU and restarted. Same result, even tried the USB driver thingy but it gives me errors when I update the driver. Shows USB on the phone though.
marmin said:
Crack can I ask a question? Finally took the plunge and had a go at flashing new rom. got stuck at the first hurdle, Got hit with an "error 262". Not sure if I follow the solution though as I took battery out as it suggested in the RUU and restarted. Same result, even tried the USB driver thingy but it gives me errors when I update the driver. Shows USB on the phone though.
Click to expand...
Click to collapse
So did you have an issue flashing the actual ROM or the SPL? What SPL do you currently show in your bootloader? How were you trying to flash the ROM?
cRaCKwHoRe said:
I updated the wiki. You can trash this. Thanks!
Click to expand...
Click to collapse
Rmeoved sticky and will let this thread just move down the line.
Thanks for your Input (as always).
I got the same problem...
Error [262]
i just followed the recoffery of the RUU and after i pulled out batery and i whent back to my normaal device start-up it was recofered according to RUU.
but i still had the same error after i tryed updating again my ROM.
my SPL on my Bootlouder = 1.14.0000
i was flashing my ROM with ur Dummies guide and i whent for the HSPL flashing.
ive done the "Drivers updating HTC USB Sync " before with succes.
plz help me
i got the same problem error (262) when im trying to update my SPL to 1.54, that was started the 0% screen and just hold on that screen...
anyone can help me?
javahuan said:
i got the same problem error (262) when im trying to update my SPL to 1.54, that was started the 0% screen and just hold on that screen...
anyone can help me?
Click to expand...
Click to collapse
Used this tips,,, goodluck
Troubleshooting - manual SSPL
Boot up your phone.
Copy SSPL-Manual-TouchHD.exe to your phone. In a file browser on your phone browse to where you copied SSPL-Manual-TouchHD.exe and run it.
Your phone will reboot into its bootloader and should show SPL v 1.07.OliNex.
When it shows USB at the bottom then run HSPLWrapper_blackstone_156OilNex.exe from your computer again.
Go to step HSPL3 if successful.
Error message [270]
I'm getting this error message which says its a corrupt image, check utility and try again.. I can't find anything about this on the forum. Does anyone know anything about this?
markzladz said:
I'm getting this error message which says its a corrupt image, check utility and try again.. I can't find anything about this on the forum. Does anyone know anything about this?
Click to expand...
Click to collapse
ERROR 270 (Update Error - The image file is corrupted):
Your device is still CID locked while trying to flash a cooked/custom ROM. Flash the USPL or Hard SPL if you have not already done so! If you were using the temporary USPL (white screen) method when you encountered this, you have to wait for the screen to go completely white before flashing a ROM (reset and try again if the screen did not go white).
Click to expand...
Click to collapse
You need to first install hspl or uspl. Read the Dummies Guide to Flashing (link in my signature)
ClydeB1 said:
You need to first install hspl or uspl. Read the Dummies Guide to Flashing (link in my signature)
Click to expand...
Click to collapse
Thanks, will try that and see if it works. The problem at the moment is when I'm flashing the ROM after I've installed USPL it goes to about 100% before failing and giving me that error message.
Googeled for error 262 and the problem is:
This error occurs during the CE ROM code upgrade process.
Next i tried HardSPL install, then give error 202:
CONNECTION
Want install Rom Energy.DIAMOND.23569.Sense2.5.LITE.May.10.7z
maybe someone can tell what i need to do next?
SRY for english!