Database Develop

Buggy damned Tilt official 6.1...

I've flashed my 8925 twice and hard reset it once, I've tried with and without having allowed the ATT customizations, and still there's a bunch of stupid little crap that is driving me nuts. Please note: these bugs are with no additional software installed.
Can't keep the backlight from timing out. I've always disliked the default of having the screen auto dim: if the screen is on I'm probably *looking* at it, otherwise I'd have turned it off... I've tried everything, setting no backlight time out, leaving it checked but matched to the screen shutoff, it shows the right thing in the control panel and stays on after I leave that screen, but usually within minutes or especially after I've used the phone it'll start dimming at 10 seconds again--even though turn off backlight is still unchecked in the backlight control panel.
Missed calls / call log badly broken: I'll get the missed call notification but when I try to see the caller it shows the log as empty, and when I go into the log manually from the phone app it also shows empty--doesn't even have my outgoing calls.
Voicemail notification got stuck on. I can probably call ATT and have them fix this on their end in minutes but it's bloody annoying that my phone's been notifying me of a long deleted voicemail message for days.
Anybody else having any of these problems?
Anybody know a fix for any of them?
I've already tried advanced_configuration, no great help there.
What's the latest/best cooked ROM? I like that the official has stuff like Voice Command and Sprite Backup, would like to keep them...

I haven't noticed any of those problems. I have however had problems with the phone being really sluggish at times. Still testing with no apps installed. I don't have the backlight problem. I have just used the settings in Kaiser Tweak and everything is working. Not sure that I will keep using it though. I will probably go back to Hyperdragon's newest ROM's. Those always seem to work really well for me.

No issues with the official AT&T ROM either.

wmg76 said:
I have however had problems with the phone being really sluggish at times.
Click to expand...
Click to collapse
Are you using the right SPL?
I did not try the rom. But I heard cleartype w/ landscape problem still exist w/ this rom (like the official HTC 6.1 rom). It could be fix by replacing the ddi.dll but will probably break Opera mini 9.5.

Problems??? Pull up a chair! First I installed the ROM and none of my would work. I couldn't connect to the internet. I downloaded the ROM again and reflashed it. This time icons started disappearing on my phone. I did a soft reset. Nothing. Did a hard reset. Nothing. I reflashed. Loaded my apps, they actually worked. I set up my email, and I could connect to the internet. Great! Finally! One hour later, I got a phone call, but my phone didn't ring. Huh?Anyway, answered it, when the other party spoken it came out the speakerphone. I checked my device and there was no sound: ringtones,music games,alarms. Soft reset...Startup sound played..loaded up and no sound. Call ATT for a help, they decided to send me a replacement. Bad device, I guess. So I redownloaded the ROM and tried a different phone( i know, i know), can't get email to work, can't get MMetrics work. I quit!I will be going to custom ROM! I have a lot of reading to do.

Been using the new AT&T Rom since it was released and not having any issues. The only minor problem I have is that I'm seeing some compatibility issues with the version of S2U2 that I am using. Otherwise, good to go.

I don't get how people are having problems with this. Everything works flawlessly with me.
Except threaded messaging sucks, but with Kaiser Tweak, I turned it off.

I have had only 3 major issues with this rom.
1: Camera works, but doesn't show anything on the screen. I have a black screen, press the capture button, and I get a picture, but I can't tell what I am looking at until I take the picture. Working on this issue now. [Update] I just installed HTC Camera v5.04 b29195.00 http://rapidshare.com/files/99227062/HTC_Camera_v5.04_b29195.00__PPC_.CAB . Works Perfect now!
2. Battery life was HORRID! After 10 minutes I was down to 90%, while it sat on the desk, screen off, nothing running. After switching from 1.65.21.18 to 1.65.21.14, life was peachy. 8 hours with normal usage and only down to 80%.
3. Blue Tooth drops erratically. I connected my bt headset to the phone, made a call, after 10 or 15 minutes, it dropped the headset. BT stayed turn on, but headset couldn't be found. Turned off headset, turned back on, magically found. Haven't figured out what is causing this, but am researching that as well. OK, So I got on HTC's website to see if there was an update. There is no update for BT for the Tilt WM6.1. However, there is a fix for TYTN II WM6.0. http://www.htc.com/europe/SupportDownload.aspx?p_id=13&cat=0&dl_id=60. I decided to try this fix, installed thinking I would get the whole "this program was built for a previous version" garbage, but I didn't get that. Anyway, I am going to try this tomorrow when I make my calls. I will update if I notice it fixes my issues.
Otherwise, it's fast, good signal, good sound quality, etc. Overall I am pretty happy. Will be happier when I finally get the BT to stop dropping, as I travel a lot and it's illegal to talk on the phone w/o a hands free on any military installation.... Sorry if I didn't answer any problems others are having on this actual forum, but maybe someone else will be having the same issue and see my posts for my fixes. Thanks!

zip, zero, nada.......UI is faster, apps are faster, threaded SMS is really nice to have, MSVC works as advertised with my JB2.

Different Alarm Sounds!!
I have a small WAV file that I use as an alarm sound but now can't get the sound listing in the alarm setup. I use to put it in application data/sounds. It now doesn't show up if I put it there or anywhere else (/windows, /my documents/my ringtones). Anyone else have this problem?

eltrebor said:
I have a small WAV file that I use as an alarm sound but now can't get the sound listing in the alarm setup. I use to put it in application data/sounds. It now doesn't show up if I put it there or anywhere else (/windows, /my documents/my ringtones). Anyone else have this problem?
Click to expand...
Click to collapse
All my WAV and MIDI files in the root of Windows show up fine. How small is the file? 600kb is the size limit for sounds on AT&T ROMs unless you modify the registry key that restricts it. 600k may be large for an mp3 file, but that's only mere seconds of a WAV file.

I upgraded as soon as it was available and am seriously considering going back to the old WM6.0 ROM, which worked well. I have had several lockups and had to soft-reset. I have also had problems with calls. Once, it rang and shoed me the call, but wouldn't let me pick it up. Other times I have had echos. GPS lock time is also much longer. Oh, yes, the equalizer in TCPMP creates terrible distortion. It worked great in 6.0. And I am using the recompiled version.
It is great to get results of satisfaction with the new ROM, but I personally would like to know, for those who have been having problems and those, answers to some questions:
1 Which SPL
2 Which radio
3 Activesync or POP for email
4 Bloatware installed or not
5 PIE or other browser
I am sure that there are others, but those are what come to mind for the moment.

No Problems Here
FWIW, I think my Tilt is running much better with the new ROM. I've only had it (the new ROM) for a couple of days, but TT7 and Google Maps seem to run faster, and It seems to detect WIFI networks MUCH faster than with the old ROM. I'm a happy camper, at least for now.

I've noticed that its been alot slower and I don't like having a button devoted to the ringtone volume. The other HTC Tab I was using that was supposed to be an official use had Music allowing me to access Windows Media very easily now I can't. I also noticed my dialing pad is different and not the same as it was. I also don't like the threaded SMS on Windows Mobile it doesn't suit it. It makes it look very confusing and also I've noticed it has problems moving the screen upwards so that I can see what is being written in the space. Another thing I notice is randomly the HTC Home screen cuts itself off cutting off portions of the tab information. Its something to get used to but I don't see it happening cause I can't figure out what happened to some items on the phone like my GPS doesn't work, I am experiencing worse internet problems than before, Wifi dies frequently, and the dialer doesn't seem to work like it used to. Its a disappointment.

NotATreoFan said:
All my WAV and MIDI files in the root of Windows show up fine. How small is the file? 600kb is the size limit for sounds on AT&T ROMs unless you modify the registry key that restricts it. 600k may be large for an mp3 file, but that's only mere seconds of a WAV file.
Click to expand...
Click to collapse
Which key? I have been hunting... and no luck so far.

Backlight timeout linked to lock??
When I re-downloaded the software and re-flashed a *third* time things seemed to work better. The only thing I did differently was skip the 'setup a password' that last time I flashed.
The phone worked pretty well all weekend, and then this morning I finally put in owner info and set a pin password.
And I just noticed the backlight has started dimming after 10 seconds (or less) again. Restart didn't correct it, nor did changing the setting in advanced config so the screen doesn't dim for unlock screen.
For now I turned off lock and went into the backlight tab and it's stopped doing it. BLOODY ANNOYING. I've seen mention of the backlight timeout bug in other forums too...
Even while the phone was working well over the weekend I noticed that fairly often the first attempt to bring it out of standby flashes the screen on then it goes back off, comes on and stays on when I press power the second time.
I ran into the idiotic bug where text is white on white when in landscape mode, know I saw something about that being a cleartype bug or something and there being a fix, but why the hell would it be released like that?
Also, I can NOT get the 'message sent' notification to disable... does 'advanced config' not actually work?

Buggy is an understatement!
Having been unable to bear/ignore the bugs I reverted back to 6.0
Here's what I along with you guys have issues with.
1)Ringtones revert back to it's default tone whenever I open: Settings>Phone
2) Back-light reverts back to 10 seconds at random and often.
3) Google maps will not display letters when searching for places, but it'll invisibly type
4) Typical freezes on pages and things of that nature
5) Bloatware..

SeekerJBP said:
Which key? I have been hunting... and no luck so far.
Click to expand...
Click to collapse
I'll help you out here
Go into HKEY_CurrentUser --> ControlPanel --> Sounds --> FileSizeLimit ( it's a DWORD value)
Just delete the DWORD value, and bam, enjoy .
EDIT : wow, just realized this is my first post. I've been browsing the site since the Tilt came out, but I guess I've never found it necessary to post. haha!

TheCritic said:
Can't keep the backlight from timing out. I've always disliked the default of having the screen auto dim: if the screen is on I'm probably *looking* at it, otherwise I'd have turned it off... I've tried everything, setting no backlight time out, leaving it checked but matched to the screen shutoff, it shows the right thing in the control panel and stays on after I leave that screen, but usually within minutes or especially after I've used the phone it'll start dimming at 10 seconds again--even though turn off backlight is still unchecked in the backlight control panel.
Click to expand...
Click to collapse
I have the exact same problem with my 8925. My work buddy across the hall does not have this problem with his 8925. Running WM6.0 my screen has ALWAYS dimmed at boot, as well as after a call ended; his has never done so. Now, after we've both upgraded to WM6.1, I have all my same problems, as well as the additional 10 second auto dimming that I did not encounter with WM6.0, he still has none.
No matter what settings I change, no matter if connected to power, USB, or none, my screen dims after 10 seconds. I can get it to temporarily revert back to the setting of my choice, by going into the settings and then back out, but if I manually dim the phone, get a call, or pretty much anything, it defaults back to the automatic 10 second dimming. I'm so pissed off about this. S2U2 also automatically kicks in on every screen dim, so I can't use it while the dim prob is going on. Certainly someone within this HUGE base of geniuses has a definitive answer for this.

Lots of little bugs in this release.
Google maps doesn't like it.
Can't get TCPMP to work.
Gets sluggish.
MSVC doesn't notify.
Other things I can't think of now.
Pretty irritating to say the least.

Built in lock from WM locks while in a call

Hello to all of you!
Happy new year first of all!
Since a few days i'm using the Built in lock from WM and the Phone Canvas posted here on the Diamond Thread. Previously I've used TouchLockPro, but somehow it didn't work properly for me...
Right now I have a problem with it, I've configured with Advanced Config Tool form Schaps a timeout to lock my device automatically so when I don't touch my device 30 sec or press the power button, It will lock...
But....also in a call or something, which is very annoying because to end the call I have to unlock first AND my phoneskin is gone as well.....
So summarised:
Does anybody know how to automatically lock my phone like it should do, except while in a call??
Thanks in advance!
Kind regards
Jeroen
p.s. mods, if this item has already been discussed, can you please erase this Thread then??

Pietje_1985 said:
So summarised:
Does anybody know how to automatically lock my phone like it should do, exept while in a call??
Click to expand...
Click to collapse
I dont use the built in lock from windows anymore (i used to have your problem). Instead i now use S2U2 (Scroll 2 Unlock) and this doesnt lock during a call. One of the best apps i have on the phone - and its freeware!

kaos_king said:
I dont use the built in lock from windows anymore (i used to have your problem). Instead i now use S2U2 (Scroll 2 Unlock) and this doesnt lock during a call. One of the best apps i have on the phone - and its freeware!
Click to expand...
Click to collapse
Thanks for your reply kaos_king
I'd rather stick to the standard lock app from WM, because S2U2 is quite big app to load into memory and for me it drains my battery quicker...(at least, that's my opinion)
Thanks anyway...I hope somebody else knows how to solve this.....

Pietje_1985 said:
Thanks for your reply kaos_king
I'd rather stick to the standard lock app from WM, because S2U2 is quite big app to load into memory and for me it drains my battery quicker...(at least, that's my opinion)
Thanks anyway...I hope somebody else knows how to solve this.....
Click to expand...
Click to collapse
Yeah it used to be very annoying when i had to unlock it to put on loudspeaker! lol
Im just putting up with the **** battery for now
Hope u get it sorted mate

kaos_king said:
Yeah it used to be very annoying when i had to unlock it to put on loudspeaker! lol
Im just putting up with the **** battery for now
Hope u get it sorted mate
Click to expand...
Click to collapse
Hehe...thanks for your advice mate....gonna be allright
Untill then I manually have to lock/unlock

Isn't there somebody who could help me??

Pietje_1985 said:
Since a few days i'm using the Built in lock from WM and the Phone Canvas posted here on the Diamond Thread. Previously I've used TouchLockPro, but somehow it didn't work properly for me...
Right now I have a problem with it, I've configured with Advanced Config Tool form Schaps a timeout to lock my device automatically so when I don't touch my device 30 sec or press the power button, It will lock...
But....also in a call or something, which is very annoying because to end the call I have to unlock first AND my phoneskin is gone as well.....
Click to expand...
Click to collapse
Hello,
Please can you clarify your problems? Does the phone always lock itself in a call? What do you mean your phone skin is gone? When did it go?

Davey101 said:
Hello,
Please can you clarify your problems? Does the phone always lock itself in a call? What do you mean your phone skin is gone? When did it go?
Click to expand...
Click to collapse
Hi Dave!
Well the problem is actually caused by ACT 3.2 from Schaps I think.....I've configured the keylock from Windows Mobile to lock itself automatically after a period of inactivity OR when I press the powerbutton to suspend the the device, and after that my phone is locked! But even WITHIN a call, my device will become locked with the specified timeout and will make my phoneskin dissapear and let it go back to the homescreen!
If I want to hang up then, I have to UNLOCK my device and then TAP on the phone icon which appears next to my Signal strength Icon....THAN the phoneskin will reappear and THEN I can hang up the call.....
Hope you'll know by now what I mean...
It's driving me crazy, because I really fancy the automatic lock........
Thanxx anyway
Jeroen

in the advanced config thing or diamond tweak theres an option for lock with "light sensor while in call" or something like that. disable it. and ur set. its annoying as hell, i accidentally played with that feature and it annoyed the crap outta me until i finally found what it was.
in diamond tweak, it should be in the first section of the thing, u dont need to even scroll. i forgot about advanced config cause i dont use it.
edit: option is called "light sensor" but the description talks about it for use during phone calls.

untrueparadox said:
in the advanced config thing or diamond tweak theres an option for lock with "light sensor while in call" or something like that. disable it. and ur set. its annoying as hell, i accidentally played with that feature and it annoyed the crap outta me until i finally found what it was.
in diamond tweak, it should be in the first section of the thing, u dont need to even scroll. i forgot about advanced config cause i dont use it.
edit: option is called "light sensor" but the description talks about it for use during phone calls.
Click to expand...
Click to collapse
Allright Thank you!
I will give it a try...I'll let you know if it's working

untrueparadox said:
in the advanced config thing or diamond tweak theres an option for lock with "light sensor while in call" or something like that. disable it. and ur set. its annoying as hell, i accidentally played with that feature and it annoyed the crap outta me until i finally found what it was.
in diamond tweak, it should be in the first section of the thing, u dont need to even scroll. i forgot about advanced config cause i dont use it.
edit: option is called "light sensor" but the description talks about it for use during phone calls.
Click to expand...
Click to collapse
Pietje_1985 said:
Allright Thank you!
I will give it a try...I'll let you know if it's working
Click to expand...
Click to collapse
Nope problem is not solved yet...my phone still keeps locking..

Pietje_1985 said:
Well the problem is actually caused by ACT 3.2 from Schaps I think.....I've configured the keylock from Windows Mobile to lock itself automatically after a period of inactivity OR when I press the powerbutton to suspend the the device, and after that my phone is locked! But even WITHIN a call, my device will become locked with the specified timeout and will make my phoneskin dissapear and let it go back to the homescreen!
If I want to hang up then, I have to UNLOCK my device and then TAP on the phone icon which appears next to my Signal strength Icon....THAN the phoneskin will reappear and THEN I can hang up the call.....
Click to expand...
Click to collapse
Hi Jeroen,
The problem is not caused by Schaps ACT because that just enables and disables WM features by changing the normal registry entries used by WM.
The problem is some combination of your ROM and your dialer skin not playing nicely with the auto-lock feature. Try removing the dialer skin to see if that helps. If it does help then there may be another, similar phone skin you can use instead.

Ok, I've done a bit more investigation into this issue. I don't use auto-lock normally so I've tried it out. I can confirm it locks during my calls too.
You have a least a couple of options -
1) Don't use auto-lock. You could lock the phone with the left soft key like I do.
2) Don't switch off the screen during a call. There are two settings in Schaps ACT to prevent the screen shutting of automatically and this version of the phone skin has the in-call locking curtain:
http://forum.xda-developers.com/showthread.php?t=466519

Davey101 said:
Ok, I've done a bit more investigation into this issue. I don't use auto-lock normally so I've tried it out. I can confirm it locks during my calls too.
You have a least a couple of options -
1) Don't use auto-lock. You could lock the phone with the left soft key like I do.
2) Don't switch off the screen during a call. There are two settings in Schaps ACT to prevent the screen shutting of automatically and this version of the phone skin has the in-call locking curtain:
http://forum.xda-developers.com/showthread.php?t=466519
Click to expand...
Click to collapse
Hi Davey101
Thanks for your help in advance! I really appreciate it
I do use the Nosleep!.cab file to prevent my screen from going off during a call, so that would not be the cause....I think I just have to turn off the phoneskin, OR do it manually
Off course...I rather prefer to leave the auto-lock function active, but if it's not gonna work, I have to face it
Cheers mate!
Jeroen

Delayed Notifications in Cooked ROMS..

Hello,
I've been having a problem with a few of the custom builds (Timor, AthineOS, CellPro Evo), and one problem I've noticed with each of the ones I've used is that when I get a text it doesn't notify until I wake the screen back up. Once I do that it vibrates and rings, but its up 30min after I got the text. Is this a known problem with a fix or am I better off sticking with a stock ROM?
Thank You

Funny you mention this, because I'm having the same problem. I thought it may have been a tweak I'd done and was going to do a hard reset today.
The only cab I've installed is Microsoft MyPhone. And had to edit the reg to allow the changing of the notification light timing in the Sounds & Notifications settings.

Do you know if this happens before you've made any changes to settings or installed any software on the phone? I don't recall having any problems like that myself with Timor installed, but I'm also not sure I received a text in that time. I haven't tried the other ROMs you listed.

It seemed to happen after I edited the reg settings.
Doesn't seem to be a constant occurance though. I happened to me 12 hours ago, even after a soft reset. But now I just sent a test message to myself, and all is ok... weird

Well I've regularly installed My Phone, Marketplace, Bing, Groovefish, and MP3 Trimmer, but I'd rather not delete and hard reset everything to do a test if someone knows a fix

I haven't had this issue...I am using the Valkrie Firestorm 5 and even when my phone is sleeping my phone vibrates as I get SMS messages and emails...

Well I have hard reset and held off installing using the My Phone. Everything seems well with recieving on time...but now the screen turns on everytime i get a message. It didn't used to do that and I find it quite annoying..I looked around my settings and Advanced Config and couldn't find anything.

It happens in the stock HTC rom too.
It normally doesn't happen if you come out of the text messages and go back to the home screen after you reply to someone. It's a really annoying bug

Me too...
I thought it was the result of all the hacking, tweaking and breaking I've been doing on this flash since I've been using it as a "scratch pad" but the problem you are all describing sounds identical.
I will also second the Home screen suggestion. Hit 'End' after you are done messing with the phone to go back to the Home screen. There is definitely a notification bug related to not alarming/vibrating when not on Home screen.
Though I have observed this issue, this does not completely explain my problems. Sometimes I don't actually even receive the SMS or MMS until the next day or after rebooting my phone! Most of the time it's fine though. I'm going to do a clean flash and see if that gets rid of that issue.

Same Here
I have run across the same problem with a number of the cooked ROMs. I never really noticed the problem with the stock ROM though. In my experience some of the cooked ROMs are having a problem handling the text messaging. I have over 3000 text msgs in my backup and as soon as I try to view an older text, the systems tend to lag and freeze up to the point that I need to soft-reset. Im using Athine right now and so far it has handled the text msging just fine without freeze or lag, but it also seems to have the same notification delay bug that the other ROMs have.

dwarf said:
It happens in the stock HTC rom too.
It normally doesn't happen if you come out of the text messages and go back to the home screen after you reply to someone. It's a really annoying bug
Click to expand...
Click to collapse
Yeah I'm familiar with that bug. But I go back to the home screen 99% of the time then shut the screen. I'll get a message and the LED will start blinking, but only when I turn the screen back on will it ring and vibrate.

Same problem here with the cell pro rom

ftmoe said:
Hello,
I've been having a problem with a few of the custom builds (Timor, AthineOS, CellPro Evo), and one problem I've noticed with each of the ones I've used is that when I get a text it doesn't notify until I wake the screen back up. Once I do that it vibrates and rings, but its up 30min after I got the text. Is this a known problem with a fix or am I better off sticking with a stock ROM?
Thank You
Click to expand...
Click to collapse
I have the problem with almost all of the ROM. Does anyone know if it could be a result of not using the right radio?

I could be wrong.. but I don't think it has anything to do with the radio. There doesn't seem to be any problem is receiving the message from the carrier, it's more-so the OS not notifying. This has only happened to me since trying the new WM 6.5.5 builds with Sense 2.5. Previous to these builds I have never had any issues, and only used EnergyROM with a COM2 build, and Sense 2.1

nackas said:
I could be wrong.. but I don't think it has anything to do with the radio. There doesn't seem to be any problem is receiving the message from the carrier, it's more-so the OS not notifying. This has only happened to me since trying the new WM 6.5.5 builds with Sense 2.5. Previous to these builds I have never had any issues, and only used EnergyROM with a COM2 build, and Sense 2.1
Click to expand...
Click to collapse
Im not sure about all the technical stuff your talking about...I just know that on almost every ROM I flash, when the phone goes to sleep, they seem to not do anything. Its only when I wake it up do I receive text messages, notifications and the weather doesnt update on its own in the prescribed time its supposed to according to the settings I have selected.

The radio version may affect the quality of your reception. So if you have no reception then that will obviously delay texts getting through, and stop you being able to get to the weather servers. But I can't see why it should have anything to do with delayed notification of texts that are already on your phone.
I realise this might not help you much, but on my EnergyROM (see my signature for full details), my phone gets texts fine when it's asleep.
The weather isn't designed to get automatically updated when your phone is asleep though. There was a recent thread on how to change the registry to make it do so, if you haven't done that then your weather stuff may well be acting correctly.

steviewevie said:
The radio version may affect the quality of your reception. So if you have no reception then that will obviously delay texts getting through, and stop you being able to get to the weather servers. But I can't see why it should have anything to do with delayed notification of texts that are already on your phone.
I realise this might not help you much, but on my EnergyROM (see my signature for full details), my phone gets texts fine when it's asleep.
The weather isn't designed to get automatically updated when your phone is asleep though. There was a recent thread on how to change the registry to make it do so, if you haven't done that then your weather stuff may well be acting correctly.
Click to expand...
Click to collapse
Awesome...thank you so much for the information and help

This is the thread about getting weather to update automatically - http://forum.xda-developers.com/showthread.php?t=585373

WHY DONT YOU JUST USE A ENERGYROM????? I dont have any issues with those roms and i just updated to the .88 radio. no issues as of yet.

[BUG] DamageControl 2.05

I would have added this to the thread, but it would get lost in the endless amount of posts that come per minute. Disabling SD Card Notifications does not disable them, enabling and disabling again does not disable it either. Even with the volume completely off when you plug in the phone to charge it notifies you via ringtone. Very annoying

If this is how you're doing it, maybe you should keep the first post update with verified bugs and there fixes (if there is one) as they are reported. This way damaged' thread will be less cluttered and people won't have to wade through hundreds of pages of posts to find something.

good idea but don't forget... SEARCH = WADE RELIEF

Mine works just fine. I dont get a ringtone when I plug my phone in and the volume is off...

Im sorry, but my trackball is still intermitent. I thought it was supposed to be fixed?
And my broswer hangs on the last leg, even though the page is fully loaded, I have to press stop.
?

mountaindont said:
Im sorry, but my trackball is still intermitent. I thought it was supposed to be fixed?
And my broswer hangs on the last leg, even though the page is fully loaded, I have to press stop.
?
Click to expand...
Click to collapse
You sure its not working. Its light sensitive so that may be the case.

david279 said:
You sure its not working. Its light sensitive so that may be the case.
Click to expand...
Click to collapse
Its light sensitive? Hm...didnt know that. Could very well be my issue, is there a way to turn it off? I liked in 1.5 how it came on by just moving it. Let me know my phone was responding and just....brought a sense of comfort I can never explain. I guess maybe being jealous over it whilst having the g1.

Another issue I am having is at the lock screen. Before this update if my phone was locked, you press the power key and then either swipe your screen down, or press menu to unlock. Now whenever I press menu, it unlocks but automatically pulls up the menu on the home screen. Not a huge issue and definitely not complaining, just wanted to let you know.

has anyone else had the issue where you answer an incoming call and there is no sound on your end or their end. and the only fix is to restart your phone?. it is very annoying. i found this in testing but it stopped. now its starting up again today

Bump
I know i annoy you all with my trackball b!tching, cause its no big deal to anyone else, but to me, I could live with all the original bugs if the trackball was constant.
Also, friendstream? I didnt see it in the rom, and cant find it, and idek if it works in damages latest release.
Total noob question, but the only reason im interested in friendstream is because, to be honest, idek what it IS. Link fb, ms, and twitter tkgether right?

I'm having trouble with VVM, when you call and vm answers it asks for the number your calling and the # and then says it doesn't recognize try again.......I tried google voice but it won't even go to VM at all......

wsucoug09 said:
Another issue I am having is at the lock screen. Before this update if my phone was locked, you press the power key and then either swipe your screen down, or press menu to unlock. Now whenever I press menu, it unlocks but automatically pulls up the menu on the home screen. Not a huge issue and definitely not complaining, just wanted to let you know.
Click to expand...
Click to collapse
I don't have this problem. How many people are experiencing this?

officer629 said:
I don't have this problem. How many people are experiencing this?
Click to expand...
Click to collapse
Just broswer lag and trackball for me. Could i reccomend a fresh wipe and flash?
Bump again:
Trackball light sensitivitt settings?

I just tested my voice mail and found something odd...
When I get my voice mail notification, I also get a text message saying "Android has sent you a Sprint Voice Message. Call 408-970-0000 to listen.
MMSN,
c645518a1548,V^aORG3gDHGY//CM"
Very weird and a little annoying.

Dont know why people are having issues with vvm. Mines worked perfect everytime. Fresh wipe and flash?
Bump AGAIN
You have my permission to flame me...after you help lol...

officer629 said:
I just tested my voice mail and found something odd...
When I get my voice mail notification, I also get a text message saying "Android has sent you a Sprint Voice Message. Call 408-970-0000 to listen.
MMSN,
c645518a1548,V^aORG3gDHGY//CM"
Very weird and a little annoying.
Click to expand...
Click to collapse
You can turn that off by disabling sms in settings......

officer629 said:
I don't have this problem. How many people are experiencing this?
Click to expand...
Click to collapse
I am. Re-flash and clear data in HTC settings didn't fix.

mountaindont said:
Dont know why people are having issues with vvm. Mines worked perfect everytime. Fresh wipe and flash?
Bump AGAIN
You have my permission to flame me...after you help lol...
Click to expand...
Click to collapse
It's not that it doesn't work, cause it works fine. Theres just this added text message that I never had before.

officer629 said:
It's not that it doesn't work, cause it works fine. Theres just this added text message that I never had before.
Click to expand...
Click to collapse
Oh! Lol, just disable sms notification. I apologize.
Bumpbumpbump

Mine still doesn't work tho...........

Notification bar is automatically closing

I have googled and searched everywhere and can't even find someone else having this issue. I have about a 2 week old note 8, and it happens any time, but I have made sure that it wasn't because the phone was locked, but for example, with the screen unlocked from the home page, I can pull down the notification bar, start scrolling down through my notifications and the whole bar will disappear, like I scrolled from the bottom to close it but didn't. Sometimes I swipe it down and it closes immediately, other times I can swipe it down and scroll through all my notifications and it will stay open, and sometimes it will close as I'm scrolling. I would think it was an issue with the touch sensor on the screen but in no other app does it randomly scroll anywhere. I've tried restarting the phone multiple times, with no fix. It just started doing this either yesterday or the day before and I can't think of any apps that I installed that would maybe cause anything like that. I haven't completely reset the phone because I don't want to and it would be pretty bad to have to reset it after 2 weeks.. Does anybody have any other thoughts or similar thing happening?

Is it possible that you have the fingerprint unlock set to allow you to pull down and push up the notification shade?

There is already a thread discussion for this. You are not the only one with this problem, I have it also.
https://forum.xda-developers.com/galaxy-note-8/help/note-8-notification-panel-swipes-t3680387

dsamuels39 said:
There is already a thread discussion for this. You are not the only one with this problem, I have it also.
https://forum.xda-developers.com/galaxy-note-8/help/note-8-notification-panel-swipes-t3680387
Click to expand...
Click to collapse
thanks for the update. Didn't see that thread before. Looks like its not an isolated issue then..

I am hoping this will be a firmware/software issue. I currently have very little installed on my phone, so I am thinking it's fixable.