HELP INSTALING KAISER PLEASE!!!
Im a newbie and Ive downladed the Kaiser tweak ( the most basic one I believe) and when I transfer the file to my phone I dont believe it zipps all the way open?? Or it says that its not a supported file??
I really like what you guys are doing and any advic would be appreciated!!
Jerry
try running it from your pc if it's an exe
UNzip it on your PC to a folder called kaisertweaks then move the whole folder to your PDA
Kaiser Download is still not working
When I try to open the Kaiser file when it is a exe. file an error message apperas that says " not a valid WIn32 file"......when I Unzip it on my tilt it doenst unzip all the way...It goes like 83% for the file and like 10% for the html file...Althought I do not have a memory card its prety new and it has the space to support the file....
Could i Be downloading a old link??
Related
Hi, i just downloaded space invaders game which is a PRC file, i have tried adding it to the games folder, and using the MIDlet mnger to try and find it.
Every time i try to run it i get an application error. The files are on my desktop pc, anyone know where i copy and paste them to onto the pocket pc? Have tried copying to my storage card, but still get the application error, perhaps PRC is an unsupported file type? (bit of a pocket pc noob im afraid)
Any help much appreciated.
Sorry! .prc files are for Palms!
You need .jar files to install to your midlet manager
HTH
Fin
Have a look at this site for Midlet games
http://www.arcticautowash.com/Games/
Thanks for the replies 8)
can someone explain how i use the midlett manager for games plz :?
ok so im new to this game..ive been reading the threads and posts over and over and over again...so ive got a brand new unit so i should have to install any RUU...so i make sure im a guest in active sync..i download the RAR file for touchflo on my computer..i drag the ASerg Policies.CAB file from a folder into my Wing folder named Storage Device..run the program..then i soft reset...then from my computer i run 1_RomUpdate.bat or whatever...the Dos prompt comes up..its says press any key I do..then it makes a list of all these files and after each file it says (for example "ce_run,exe is not recognized as an internal or external command, operable program or batch file. ...after that i hard reset like im supposed to...for some reason it just goes back to the regular Wing interface...can someone help me out..please...i got the phone a couple hours ago and i cant put it down until i figure this out LOL..its driving me nuts
Hard Reset then redo. Or put it back to the original RUU deal then try it again.
latinluvuh said:
ok so im new to this game..ive been reading the threads and posts over and over and over again...so ive got a brand new unit so i should have to install any RUU...so i make sure im a guest in active sync..i download the RAR file for touchflo on my computer..i drag the ASerg Policies.CAB file from a folder into my Wing folder named Storage Device..run the program..then i soft reset...then from my computer i run 1_RomUpdate.bat or whatever...the Dos prompt comes up..its says press any key I do..then it makes a list of all these files and after each file it says (for example "ce_run,exe is not recognized as an internal or external command, operable program or batch file. ...after that i hard reset like im supposed to...for some reason it just goes back to the regular Wing interface...can someone help me out..please...i got the phone a couple hours ago and i cant put it down until i figure this out LOL..its driving me nuts
Click to expand...
Click to collapse
It's not seeing the files that it calls for within that batch file. Where do you have your files stored?
what rom are you trying to flash?
I know with PDAVIET you have to aserg twice and soft reset after each.
Also, IT IS IMPERATIVE that you flash over an RUU.
as far as "ivanmmj's" comment goes..lets see where am i stashing the files..after it opens up using WINRAR i just use the directory right from WINRAR im not actually moving the files onto my hard drive....
I am was trying to install the ITOUCH FINAL V2 blah blah blah...
I installed the 5 button setup and the overclocking program with the battery indicator..
i got everything to work that just involves moving CAB files over..obviously a simple thing that doenst need a page long thread to explain how to install..
I still need help..im following directions but like ivanmmj said its not reading the files ..still need help LOL
latinluvuh said:
as far as "ivanmmj's" comment goes..lets see where am i stashing the files..after it opens up using WINRAR i just use the directory right from WINRAR im not actually moving the files onto my hard drive....
Click to expand...
Click to collapse
There's your problem. You need to unrar the files to a directory. Then open a command prompt and run the batch file from that directory.
Hey I am new, and I am wondering how do you install cab files? I downloaded the midlet manager and i extracted it on my pc, and i see a bunch of files but none of them are cab files,they are all unidentified,can some one help me please? much appreciated
thanks in advanced
Just copy and paste the zipped cabfile in your phone anywhere through Activesync,preferably 'My documents' folder and execute it there in the phone,it'll run and install all by itself.
Cheers!
when I extract the file,I dont see any cab files, So i just put the whole folder in my phone,I try clicking on the files and they wont open,I just get a message sayin
"There is no application associated with "00CAB10A",run application first then open this file from within the application
ok, for 'Midlet' here's how you do it as per the post in Midlet Manager by risidoro:-
------- HOW TO INSTALL ------------
- Download Risidoro's Intent MIDlet Manager version 11.1.7.1023
- extract the cab (inside the archive) somewhere in your PC (e.g. Desktop)
- copy to somewhere in your PocketPC (e.g. \storage card)
- in your PocketPC, navigate with File Manager to the cab and tap on it to install
- when asked, choose to install in the Device (and NOT in Storage Card!)
- reboot when asked
or read the thread :-
http://forum.xda-developers.com/showthread.php?t=286604
Cheers!
I just said when I extract the folder I dont see any cab files, are files are unidentifed,do you understand what am saying,I see a bunch of files but none of them have cab extensions i see
setup
and other files buh none of them have cab file extension,
can you please just send me the cab file because I cant seem to extract it or get it, maybe my pc doesnt have some kind of plug in? i dont know
snaxxx said:
I just said when I extract the folder I dont see any cab files, are files are unidentifed,do you understand what am saying,I see a bunch of files but none of them have cab extensions i see
setup
and other files buh none of them have cab file extension,
can you please just send me the cab file because I cant seem to extract it or get it, maybe my pc doesnt have some kind of plug in? i dont know
Click to expand...
Click to collapse
You are NOT supposed to unpack the CAB!!!
You must copy the cab (Risidoro_Intent_MIDlet_Manager_11.1.7.1023.cab) found inside the zip file from the thread that zabardast linked to your device and simple run it (one click via File Explorer or double-click with Total Commander)
as simple as that...
thank you so much
I got it installed
ok I have a htc droid eris and I can't find the file manager on my phone to get to the files on the sdcard. so I downloaded a file manager app and when I click on the .cab file it does not just install it asks what I want to do open with kind of thing. like browser and a bunch more things I have tried most of them and nothing is working. Is there something else I need to install a .cab file with this phone or wtf is my dumb butt doing wrong to not be able to install it.
Install .cab files to unlock sd card.
Hi, think ive messed up here... can someone help or confirm my balls up!
Ive been following this tutorial to flash my hd2 with an updatable Win.7 rom;
http://forum.xda-developers.com/showthread.php?t=1236027
Charging ahead, installed, had a few probs along the way but worked through them... got it installed and working!
Then, moving onto step two of my plan, a dual boot of Android from sd card... :S Do you know whats coming? After re-reading the install instructions I noticed the 'Unlock SDCard' a few steps before installing the rom. :S I have now learnt that Windows mobile 7 locks the sd card to the device and is un-usable in anything else, having already messed up an 8gb and a 16gb...!
Could anyone please tell me if it is possible to 'somehow' install the .cab files to unlock the sd card...? or anyone know of a way to decrypt the sd card?
"THE SD CARD IS UN-READABLE IN MY PC AND PHONE WITH WM6.5 STOCK ROM"
If I re-install the rom from the 'back to the future' tutorial (link above), the storage is available for use on the hd2, but still cannot be seen by my PC... making it hard to install .cab file or anything else!
Both my sd cards have effectivly been high-jacked by microsoft...!
Please help me liberate my GB's...!
Hello,
I just bought the new HTC Touch Diamond today from Telus Mobility (My Provider) and when I put on a program to install and try to open the .cab file in the File Explorer, it tries to open it in Opera Mobile and I cannot install the program.
I am using ActiveSync to transfer the files from my computer to the Internal Storage area of my phone, then I find the files using the File Explorer on the phone, click the .cab file and it tries to open it in Opera Mobile.
Anyone have any ideas?
P.S. I just tried a Soft Reset, and that didn't help.
Thanks in advance!!
Try to manually rename the files to "whatever.CAB." Add .cab to it and see if that'll get it working.
Hmm..
Okay, I tried that and it didn't work.
I am trying to install a program and the files it has is:
_setup - XML Document (I click on that to activate install?)
ADVANC~1.000
ADVANC~1
ADVANC~1.003
ADVANC~1.004
ADVANC~2.002
Hope this helps..
(Yes, I realize it's not a cab file >.< )
After reviewing the situation over. You are NOT supposed to extract the files, then put them on your phone. Leave them in the archive (.cab file), upload to your phone and then execute it.
It should start installing right away.
Hope this helps for anyone else!!
I have just bought a HTC Diamond. I am new to the world of Windows Mobile.
So far the phone is great! I love it.
I have noticed you can download lots of apps and tweaks.
I want just wondering how to instal these programs on the phone.
I have downloaded a few games, Unzipped and copied over the files to the phone. It recognioses one of the games with a '.cab' format and it installed, but the rest are .xml.
Any pointers, tips and hints for this phone?
Cheers
the program you use to extract compressed files identifies cab files as compressed. All you need to do is copy the cab files to your phone and run the file from there. If you try to extract a cab file, you'll get those xml files you talked about.
1. Copy cab to phone
2. Run cab from phone to install the program
good luck
elcom said:
1. Copy cab to phone
Click to expand...
Click to collapse
Hi - my first post!
You mention .cab files... I expect this applies to .exe's as well (for example, hot fixes)???
Any particular folder(s) on the phone we should be copying these files to before running them? I tried to install a hot fix today, but after running the .exe and receiving a 'success' message, the phone restarts OK, but the fix does not appear to have worked.
all exe install's for pocketpc's are pc exe files which have to be run
on the pc and then it use activesync to transfer the cab file to the
pocketpc and run it there
Rudegar said:
all exe install's for pocketpc's are pc exe files which have to be run
on the pc and then it use activesync to transfer the cab file to the
pocketpc and run it there
Click to expand...
Click to collapse
Thanks for the response.
Unfortunately, running the exe on my PC (Win Vista) doesn't seem to work.
Error: "{C:\filepath\filename.exe} is not a valid Win32 application."
Any ideas? I'm a complete newb at this so have exhausted my very limited list of possible ideas...
some people don't distribute their apps with installers so it could
just be the program itself
in which case you have to execute it on the pocketpc
this of cause mean that it will not put a shortcut to the exe
in your programs thats just something you have
to do manualy with a program like total commander
which you can also use to browse to where you put the
exe file and execute it to start the program
some people don't distribute their apps with installers so it could
just be the program itself
in which case you have to execute it on the pocketpc
this of cause mean that it will not put a shortcut to the exe
in your programs thats just something you have
to do manualy with a program like total commander
which you can also use to browse to where you put the
exe file and execute it to start the program
OK thanks - I already tried running the exe straight from my Diamond, and although it appeared to work correctly, the hotfix didn't actually fix what it claimed to. Not to worry, I'm still learning all this stuff (only had my Diamond for a day and a half now... ).