Hi Everyone!
I'm a new Diamond user, before this I used Vox.
I totally love the Diamond, but there is one thing that i'm slightly not happy with.
When i put the phone on vibrate or silent mode, the sound of the music in music players also stops, and i cant listen to music with my phone on Vibrate mode. Music sound only resumes on changing volume using the Volume Rocker keys.
Is there something I am missing, or is it supposed to be like this only? On my Vox, this was never an issue, since I could listen to music without any problems while my phone was on Vibrate or Silent mode.
Thanks.
Nobody else is facing this issue? Am I the only one?
This is rediculous.. but apparently winmo doesnt allow you to play music while the phone is set to vibrate...
Is there any way I can get around this?
I dont want my phone ringing in the middle of class, and I dont want to risk forgetting to switch my phone back into vibrate after i finish listening to music.
In all honesty i dont see how this will be possible. I understand your issue however the X1 is effectively cutting off all sound from the unit, pretty much like hitting MUTE on your desktop/laptop master. I could understand if third party software could get around this but i just tested out youtube player for example and good as gold it cut the sound right off whilst on vibrate.
I dont think there will be a solution for this to be honest...i hope im proven wrong though, sure there will be a genius on here with an answer
Maybe I really am just asking for too much. But all of my previous feature phones allowed playback through headphones in vibrate mode. And if no headphones were plugged in, the device asked if I wanted to continue and playback music through the speakers anyway (while keeping vibrate mode active).
i may be a bit confused about your question.
im not sure but your phone shouldnt ring on your phone outlet speaker with headset plugged in.
i guess you can make a null ring tone....
I noticed this the other day in class also. I put my phone on silent and went to the music player and it wouldn’t give any sound to the headphone, the only way was to put the volume back up but this meaning if any one text or rang your phone the class would all hear.
I hope there is a solution for this
one fix is in the volume setting ( the one that pops up when you press volume up or down), turn the phone setting all the way down... you wont hear your phone ring but you can still play music.
another way is to just set the phone ring setting to just vibrate mode only. (haven tried it tho yet as no need for me too but just trying to offer solutions). lots of options in the setting, sound notification menu.
it might not be a one touch solution but i think it can be set up to the way you want it too.
I dont have a solution but I gotta ask... listening to music in class???? At the risk of sounding old fogeyish (I cant believe the spell checker let that word through) shouldnt you be listening to the teacher/lecturer?
Wait, can't you put the ringer on vibrate, but keep the system sound on? That's what I would do. I use the touch audio control so when I use the volume rocker I can switch between ringer and sytem.
Shadowdh said:
I dont have a solution but I gotta ask... listening to music in class???? At the risk of sounding old fogeyish (I cant believe the spell checker let that word through) shouldnt you be listening to the teacher/lecturer?
Click to expand...
Click to collapse
No no you missed the point.
I'd listen to music on the way to school. Then I'd turn off the bluetooth once i was done listening. Heres is the problem, once i turned off the bluetooth headset i use, the phone returns to normal sound mode, and is free to ring during class if I forget to switch it back to vibrate.
And I guess I could just manually switch everything to vibrate, but on the weekends I like being able to hear my phone ring.
I'll just have to change the phone to and from vibrate mode when i listen to music I guess...
Why don't you set the ring volume to 0% (don't press silent or vibrate, just set the ring volume down) and leave the system volume where you want it?
Works without problems here.
Nippero said:
No no you missed the point.
I'd listen to music on the way to school. Then I'd turn off the bluetooth once i was done listening. Heres is the problem, once i turned off the bluetooth headset i use, the phone returns to normal sound mode, and is free to ring during class if I forget to switch it back to vibrate.
And I guess I could just manually switch everything to vibrate, but on the weekends I like being able to hear my phone ring.
I'll just have to change the phone to and from vibrate mode when i listen to music I guess...
Click to expand...
Click to collapse
Oh I did indeed misunderstand... apologies...
skycamefalling said:
Why don't you set the ring volume to 0% (don't press silent or vibrate, just set the ring volume down) and leave the system volume where you want it?
Works without problems here.
Click to expand...
Click to collapse
Does setting ring volume to 0% make the phone vibrate?
Cause not hearing any ringing or getting any vibrating might be just as bad XD
Shadowdh, I was being a bit vague/mixed up, so the fault is mine. No need for apologies
Nippero said:
Does setting ring volume to 0% make the phone vibrate?
Cause not hearing any ringing or getting any vibrating might be just as bad XD
Shadowdh, I was being a bit vague/mixed up, so the fault is mine. No need for apologies
Click to expand...
Click to collapse
dude you haven't even tried it and yet you already commented on it .heh
the answer is NO it doesn't set to vibrate not just yet. if you click you're speaker icon on your top left screen(almost) it will pop you up a volume panel which consist of left: the system sound and the right: the phone speaker sound consists of six levels each top most being the highest and bottom being 0%. then below a setting of 3 radio buttons for ON, VIBRATE, and OFF.
now setting the right slider to bottom most and setting the left slider on top most gives you full system sound but 0% phone speaker sound. the radio button is autonatically still at ON and not VIBRATE by then. that is your only choice so far.
another problem afterwhich is, you won't hear any phone ring whenever someone calls you up even through your earpiece. that's just darn. I guess it's just a winmo device problem aprt from your previous phones. SEs I guess.
things SE didn't consider to take a look coz SE people lifestyles are music, camera,and or business and or both.
one more thing, when you turn your volume maxed up. you phone will ring even when the earpiece is plug. there's just no setting to turn it off. I mean for silent users who lstens to music by earphones, most of the time they like it that the speakers are just off and every sound just goes by the earphones. There is simply no setting for that.
in previous model of SE's whenever you plug an earpiece and the phone recognizes it. the phone automatically turns to headphone mode, which utilizes only the earphone as the source of sound and nothing else UNLESS specified in the settings. there has been an issue that users forget to unplug their earpieces that they misses x number of calls the whole night while their phone vibrate silently on their bags or table with their earpieces plug. That is the reaon SEs newer models after k750i I think coz I got a k750 and a w800i which is consecutively released. the w800i and so forth features a earphone mode setting but their phone speakers still rings as well as sounds when an sms goes in even if the earpieces are plugged, without a setting to disable it.
It just the way it is, and some people still need that feature. Like me. I don't want people to hear my phone ringing in public places like a market, street at dawn or related areas. Whenever I wanted to listen to music when someone calls, send an sms, the phone just simply sounds off, publicly.
Another comment/workaround a read is a null tone. Might work, but you have to manually set a null tone for calls, as well as for SMS. without any automation like a uh NULL profile perhaps.
Nippero said:
Does setting ring volume to 0% make the phone vibrate?
Cause not hearing any ringing or getting any vibrating might be just as bad XD
Click to expand...
Click to collapse
I've set my phone to always ring AND vibrate on incoming calls (so I recognize incoming calls even if the music in my living room is very loud ). So if I decrease the ring volume to 0% it does vibrate.
this is like saying i wanna close my eyes and still be able to see something.
As a more lateral solution, have you tried using something like SPB Phone Suite to set either manual or time based profiles?
I'm thinking you could have something like a travelling profile with bluetooth on and sound on and a school one with the phone/system on vibrate and bluetooth off. You could then either change manually with two clicks of the home screen or have it change automatically dependant upon time.
ill always use flightmode! easy and safe...
skycamefalling said:
I've set my phone to always ring AND vibrate on incoming calls (so I recognize incoming calls even if the music in my living room is very loud ). So if I decrease the ring volume to 0% it does vibrate.
Click to expand...
Click to collapse
i do it this way too when i´m in school^^
skycamefalling said:
Why don't you set the ring volume to 0% (don't press silent or vibrate, just set the ring volume down) and leave the system volume where you want it?
Works without problems here.
Click to expand...
Click to collapse
the problem I encounter here is that phone calls are muted and it's great, but it will still ring through the speaker if an sms is received
any solutions?
this makes it impossible to listen to music at quieter (and most usually boring) places!
Possible Solution
I'm not sure if this works on the ROM you're using, but I'm using Touch-IT 3.5 and it allows me to automatically put the phone on vibrate during appointments.
You could set your classes as appointments and not need to worry about it from then on.
Would anyone here know why all of a sudden the ringer and music speaker would quite working on my X1A? The headphones work fine as does the speaker when you are making a call. The phone was not dropped, I was sitting at the computer, noticed I missed a call and wondered why since I'd not heard a ring. Did hard reset, still nothing.
sounds like the headset detector is stuck so it think it's in headset mode all the time
people report inserting and pulling out the headset XX times sometimes solves it
Thanx for your reply, makes sense but just inserted and removed headfons at least 20 times and still no go. Any other ideas?
just press volume up button of the phone
that's not the issue, I have the volume turned up all the way, still nothing.
Hi,
Maybe some newbie question, but i didn't find any answer that works for the Xperia SP.
I would like to :
- remove the beep when ending a call. Especially really annoying in my car with BT. The sound brokes my ear everytime, i can't stand it anymore.
- understand how to manage phone sound level while in BT in my car.
Let me explain for the last query.
I didn't have all that issues with my former Nokia N8, in fact it's like the phone uses the last volume level setting I make, for my car. If I watched a video and put the volume to 100%, then even if i mute my phone, in my car the volume will be at 100%. I can also say that it updates all volumes in my phone too. Like the call volume level will be 100%. This is really annoying. With my Nokia N8, if i enjoyed a song at 8am and put high level, it did not change the volume level for incoming call. But with the Xperia SP, it is.
Whatsoever, the BT sounds are too high everytime, especially calling tonality, and end call beep.
How to remove them ?
Thanks.
Anybody know how to stop the phone from making that annoying noise (more annoying for my sleeping wife) that occurs when connecting a charger?
On my Z3C I used the Smart Connect app to mute the media volume in the evening that dealt with most things. But Smart Connect doesn't work (just crashes a lot) on the XZ1c and even if it did, the battery charging volume now seems to be linked to the ringer volume. So if you put it to vibrate the damn phone vibrates when you connect it up.
The only way I can see currently is to put the phone into complete silent mode, but that's no good as I still want to receive calls!
Well I asked Sony and they said you can no longer disable the charging noise. I guess their marketing department liked it. I've asked if it's functionality that can be reintroduced in the future, but I can't see that getting past their helpdesk.
Really rather annoying when I sneak in late at night to get "BING BING" when I plug my phone in.
A workaround is to mute the media volume.
I use an app called Media-mute to mute the media volume whenever the ringer is also muted. So whenever you need it to shut up, just mute your phone.
If you want it automated similar to what you did with Smart Connect, you can configure Android's Do-Not-Disturb feature to automatically kick in at night, which is what I currently do.
Alternatively, you can also try this other app that I use (Silent Mode Toggle) to create a widget on the homescreen for easy access and quickly toggle between modes.
Hope this helps.
EDIT: Thanks @Dashers below for pointing out that the charge sound effect is now tied to the ringer volume instead of the media volume as it had been in the past, I have tested and can confirm it.
The original text above without strike-through still holds true, so I'll leave it here.
It seems that it's not linked to media volume any more, but ringer volume. As if you put the ringer volume down, the phone will vibrate when you plug it in to charging. The only way to connect it up silently is to put the phone to alarms only or total silence.
I raised it with Sony and their response was basically "tough, that's how we do it now".