I live in NY, and as you all know, we had a huge ice storm and our power went out!! Needless to say, the first thing I did was get out my tilt and call up the power company, only to be greeted by 3 beeps and the call disconnected!! I did the same thing over and over, with the same results. Finally, I soft resetted and then minutes after the reset calls worked! Another problem is that when I pick up some calls, it goes right to the main screen even when I answer it!! Is it a radio problem?
Network problem due to the ice storm?
Related
Hello,
Recently I have been noticing that my IIi appears to inform me of incoming calls rather late. When I wear my bluetooth headset I can hear the incoming call in my headset but it takes at least 5-7 seconds before the ringer on my phone starts ringing. By the time the ringer starts ringing to let me know of a phone call I have maybe 3-5 seconds to answer it before my voice mail picks up. Does anyone else experience this problem? Are there any solutions? It almost seems like the cpu just does not have the power to process the incoming call that quickly. Any help would be appreciated.
What headset are you using?
Does it have a delay without a headset?
On mine I get a delay with a headset that supports the handsfree profile (Jabra BT800) but not on a normal one, or without a headset.
My XDA2 did this also, but the XDA2 with WM2005 worked perfectly.
could be the time needed to find/load the ringtone ?
do you have caller id or ringtonex with different ringtones and/or pictures?
maybe loaded from memory card ?
audiblefrequency said:
Hello,
Recently I have been noticing that my IIi appears to inform me of incoming calls rather late. When I wear my bluetooth headset I can hear the incoming call in my headset but it takes at least 5-7 seconds before the ringer on my phone starts ringing. By the time the ringer starts ringing to let me know of a phone call I have maybe 3-5 seconds to answer it before my voice mail picks up. Does anyone else experience this problem? Are there any solutions? It almost seems like the cpu just does not have the power to process the incoming call that quickly. Any help would be appreciated.
Click to expand...
Click to collapse
I have the same problem with mine... I only get three rings to answer the phone - which can be pretty annoying!
I've not noticed whether having any form of headset makes a difference, though.
Ringing Delay
I upgaded to the latest version of software from 02 last week, since then I get what I can only describe as a "stutter" when the phone rings. I am also getting a lot of lost calls i.e the phone rings twice then says I have a missed call, but the people ringing me say that it goes to ansaphone ???
Re: Ringing Delay
LYNDONSLANN said:
I upgaded to the latest version of software from 02 last week, since then I get what I can only describe as a "stutter" when the phone rings. I am also getting a lot of lost calls i.e the phone rings twice then says I have a missed call, but the people ringing me say that it goes to ansaphone ???
Click to expand...
Click to collapse
I have the same problems and the bluetooth flattens the battery in 4 hours. I used to have the XDA II with Sins cooked 2K3se and it was perfect, unfortunately I gave it to my son who won't give it back.
Hey, I have same problem, I got the latest ROM, and since then it got even worse. Does anybody knows how to fix the problem, modify ROM, or something, PLEase help.
Thank you.
the only solution i have to date is to change the answerphone delay, you can find your networks status codes here:
http://www.expansys.it/forumthread.asp?code=K700&thread=72
i changed mine to 30 secs to give me a better chance!
cheers
Hi all,
Running my Orange UK (unlocked and on T-mobile) with Duttys 6.1 ROM and radio 1.64.08.21 and seem to have an issue when answering incoming calls.
I'm sure I've seen this reported elsewhere but can't find it for the life of me now!
When I recieve an incoming call and press the green answer button, there is about a 2 second delay before the call is connected. If you're not quick, TM voicemail takes the call. Seems to be a second of ringing on the calling handset before it starts ringing on the TYTN 2 as well.
Can someone confirm that I have seen this reported elsewhere and post a link or suggest if this is a ROM issue, radio issue or general Kaiser issue?
Only kept the orange rom for about 48 hours and went straight to Duttys so cant really recall if it happened on the orange rom.
Many thanks guys!
Not exactly the same problem, but I have a similar issue on my Tilt with my bluetooth headset. I press the headset button to answer and don't hear anything for about 1.5 seconds. Usually, the person calling is saying "hello? hello?" by the time I actually get connected.
The headset (Plantronics 510) works great for everything else.
Have you tried the following. I've seen this help some people including myself.
Start > Settings > Phone > Services Tab .. Highlight Call Forwarding and hit Get Settings ..
Forward phone calls only if: Forward After: there is a drop down box that some providers allow you to set the time before the call goes to viocemail. (5, 10, 15, 20, 25 and 30 seconds) .. I think default was 20 on my phone/provider.
If your network provider doesn't allow changes from your phone you might have to call their customer service and request they manually change the network settings for you.
Same problem here as well! Same Rom (Dutty's), same network (Orange).
And I've only flashed last week and was on the standard Orange Rom before and there wasn't a delay. Any help is appreciated as this is a right pain.
I've changed to 30 seconds before diverting to the answerphone - so thanks for that response at least.
PsyOpWarlord said:
Have you tried the following. I've seen this help some people including myself.
Start > Settings > Phone > Services Tab .. Highlight Call Forwarding and hit Get Settings ..
Forward phone calls only if: Forward After: there is a drop down box that some providers allow you to set the time before the call goes to viocemail. (5, 10, 15, 20, 25 and 30 seconds) .. I think default was 20 on my phone/provider.
If your network provider doesn't allow changes from your phone you might have to call their customer service and request they manually change the network settings for you.
Click to expand...
Click to collapse
Had no idea that screen was there... Thanks! I've changed my call forward to 25 seconds, 'cause I had always felt it was going to vms too quickly.
Gavin
I had this issue myself with Dutty's V4 RTM (WM 6.0) rom. Pressing the Green button would result in a 2 second delay in being able to answer the phone, but if I used the left soft key to answer, there was no delay.
Same problem here. T-Mobile vanilla ROM. Can take up to 5 seconds for the call to reach my earpiece.
Solved it!
I had seen elsewhere that turning off the kepad sounds and turning off smart dialing could help, but I can't find a smart dialing option in the phone options.
Just tried switching the the Windows dialler rather than HTC and turning off auto Audio record on the Resco recorder which I had forgotten about.
After bit of playing, it appears (quite obviously now) to be the Audio recorder!
Used to use this on my wizard without any notable problems, but seems to be an issue on the Kaiser. It answers and hangs up in an instant now
A bit specific, but if any of you guys have this kind of thing installled and configured, try turning it off?!
Thanks for the replies and suggestions and hope you get it sorted too!
I don't have Resco audio installed and it only happens occasionally but when it does it usually happens a few times in a row.
Sometimes I also get the ringtone coming through the BT headset while the kaiser sputters into life. Then a 2 second delay
before the BT headset beeps and the caller can hear me.
Occasionally, I can hear the caller at the same time as I can hear the ringtone. Just another 'feature' I guess.
"If you're not quick, TM voicemail takes the call"
There's usually a few seconds delay between 'hearing' the other phone ring and it actually ringing. Can be up to 5 seconds.
some default ring tones are timed 3+ seconds apart. Choose the wrong ring tone and ring tone type (increasing volume) and
it's possible to miss the first 2 rings which, if the answer after x seconds delay is set to 20 seconds gives someone about
5 seconds to answer the phone or miss the call. My GF suffered 'missed call syndrome' after fiddling with her Hermes.
You can adjust the voice mail answer after x seconds time in start/settings/phone/services/call forwarding/get settings
Forward calls only if [no answer should be ticked]
Drop down menu Forward after ..
Mine is set to 30 seconds.
Hi there,
i own a diamond for a week now and i have two strange problems.
one is, when i receive incoming calls sometimes i cannot hear my dialogue partner but he understands me. until i press one of the volume buttons at the side. i think this does not always happen, but in about one of three calls. i also think this only happens on incoming calls, not when i call.
second is, when i dial a number sometimes i don't hear it ringing. theres absolutely no sound until the called person receives my call. this is not reproducable and happens in about one of four cases. i can call someone and hear it ringing and immediately call again and it doesnt make a sound.
this does not sound like a hardware problem. i have rom 1.37.407.2 installed and i am from germany.
i hope someone can help me, this kinda pisses me off. thanks.
alright then, seems solved. I updated to the latest official Rom.
We have a couple of Tilts and two are having the same issue, one more then the other.
Every so often when trying to make a call, it connects but the caller cannot hear anything. Sometimes if the power button is pressed the call can be heard. A soft reset also cures the problem for a while. Both are running 6.1
Mine has never been dropped, I am noth sure of the other user.
Any ideas?
Thanks,
Larry
Sounds like the NSIC (no sound in call) issue. There is a pretty lengthy thread on this and the prevailing wisdom is that this is caused my MS Voice Command, and no solution. You will fins, if this is the issue, that you can also fix it when it happens by going to settings and toggling VC off/on.
I'll be darn if I can figure out what is going on here.
4.1.2, stock except for custom kernel brick bug prevention.
I've had this rom running since it was released (this is a note international, GBT via amazon, used in the states)
Never had an issue, but I've started to notice a couple missed calls. Today, I saw what was happening.
Incoming calls, the ringer only rings for maybe 1/2 second, phone continues to "ring" but you never hear
anything! It's like it has been silenced as if you quickly pressed a button. That's how it acts without bluetooth.
If I have my bluetooth (jawbone ERA) turned on, SOMETIMES, if the screen is off, it NEVER rings, on the speakerphone
I'm using to dial my Note, I hear it ring 2 times, then go directly to voicemail. Sometimes it does that, sometimes it does
not, otherwise, the phone ringtone plays for a split second, headset continues to ring normally. Screen shows the incoming
call, but no ringtone. I haven't tweaked, installed, updated anything to cause this. Just one day it started doing it.
I'm about to do a clear reset, but it's just a PITA to set it up. Device is going on 18 months old, first issue I've really had
with it other than a bad USB port or a worn battery.
Any clues?
edit: Found the issue...I use call control as a phone number blocker. In settings, I had on for blocked calls, "remove partial ring" turned on. Once that was turned off, everything started working.