Related
Hello,
I am using aTrackDog and all works fine.
I just have the problem that it shows me sometime that there is an update for an installed app (e.g. "Finance" from Google - I have 1.0 & aTrackDog says there is 1.1 or Netcounter should be 0.7.1 or SnapPhoto 1.2.7 instead of 1.2.6) but when I go to this app at the Market there is no update available?!
What is going wrong here?
Any idea would be great, thanx in advance!
The problem with the way atrackdog works is that it relies on reports from G1 phones to update its database of apps and versions. Say an application developer releases a testing version of his app to a friend to give him feedback before publicly releasing it. If that friend uses atrackdog, then everyone else's copy of atrackdog will show there's an update available before it even hits the market.
Later versions of atrackdog allow application developers to flag applications as "testing versions" and they show up as green text in the app list. Still, not all devs participate in that part of atrackdog.
ok - I understand
Thank you for the explanation
Since updating to 1.5, is anyone elses atrackdog showing stock apps?? Mine is showing everything from googleapps to setup wizard & even the gmail app. I have set them to not check for newer versions, I was just curious if I am the only one. There's 16 stock apps all together in the list
@Beast84 ........ mine does the same, shows all the stock apps too! (Haykuro 1.5)
SatanR1 said:
@Beast84 ........ mine does the same, shows all the stock apps too! (Haykuro 1.5)
Click to expand...
Click to collapse
Not too big a deal. I was just curious if I was the only one
I have noticed, happily, that apps I have purchased for my EVO are still paid for and available for use with my tab. I have been using AppBrain instead of Titanium to put my apps back on after a ROM flash.
Can I sync my tab without effecting the list of what is on my phone? I guess I could go the Ti route but I kinda like not have another backup saved on my card (in addition to one saved in recovery).
I've synced my phone and my tablet with AppBrain and have not noticed any problems or missing apps or the like.
Outta curiosity, can you check the AppBrain website and see if shows a separate list for the tab?
Thanks!
Hey gents. Just wanted to say how much I'm loving this G Tablet first off.
But I just wanted to leave a little tip you may have used. If you enable Fast Web Install in AppBrain, you'll be able to search the entire marketplace and install apps that even don't show up in the Android Marketplace after the fix.
For example, I used it to install Vplayer Alpha as I prefer it to Rockplayer just bit. I couldn't find it in the Android Marketplace and I wasn't too sure about the APK file I downloaded to sideload.
Luckily, Fast Web Installer + AppBrain = No need for Android Marketplace.
@goalweiser - I see VPlayer Beta (I think it's no longer Alpha) in Market currently, after my extended Market Fix (http://forum.xda-developers.com/showthread.php?t=861044), although I've made a few additional tweaks to build.prop now so not certain it will be there for you.
But thanks for sharing the AppBrain Fast Web Installer tip, I wasn't aware of that one.
Thanks for the tip on the Beta...need to update! It was updated on my Evo and I didn't even notice.
That said, my AppBrain account doesn't necessarily seem to be syncing both ways. I can't seem to get the same apps on both my Evo and GTab without downloading them manually.
I'll probably just create another account for the GTab all together.
I see both my Evo and my GTab separately within the same gmail account logged into AppBrain... Look on the left-hand side, they group them according to device.
J_Bone said:
Outta curiosity, can you check the AppBrain website and see if shows a separate list for the tab?
Click to expand...
Click to collapse
Yes, it does.
appbrain sync
pray tell, how do you sync appbrain to your g tablet ?
My NC is auto-nootered running the newer Market and I love it.
But I hate that I can't get all the normal apps via Market. Amazon and Trillian are the two I've noticed so far. Amazon is only for the US Market, so I had to download an APK for it that won't update. As for Trillian, I can't even find a an up-to-date APK.
I've tried Market Enabler, which hasn't done a damned thing. I can see both Amazon and Trillian with AppBrain, but when I click Market it just says that the target couldn't be found.
How can I/we get access to these apps, installed via a real Market so they can update? I'm fine paying USD$4.99 for Trillian.
Thanks all.
MkFly said:
How can I/we get access to these apps, installed via a real Market so they can update? I'm fine paying USD$4.99 for Trillian.
Click to expand...
Click to collapse
You have to install AppBrain and Fast Web Installer from the market on your Nook. Run Fast Web Installer once and click "Allow" -- You can then find and install the protected apps using appbrain.com (not the app). Then go into the AppBrain app and sync then install the protected app on the Nook.
wreckedfred said:
You have to install AppBrain and Fast Web Installer from the market on your Nook. Run Fast Web Installer once and click "Allow" -- You can then find and install the protected apps using appbrain.com (not the app). Then go into the AppBrain app and sync then install the protected app on the Nook.
Click to expand...
Click to collapse
"Google has made fast web install impossible in the latest upgrade of the Android market, which is installed on your device."
So ... I guess this can only be done with the older Market app? That's a shame, but better than not being able to use those apps I suppose.
Will the apps be able to update themselves if I install them this way? Or will I have to go back to the website every time?
I've been searching for an RSS reader that allows to read the feeds offline, but I wasn't able to find anything.
There is no problem installing GrazeRSS and FeedMe, however I get errors when trying to log in with them.
FeedMe supports Feedly only and it shows the Moved temporarily link and then nothing (other apps using Feedly do the same).
GrazeRSS supports Feedly, The Old Reader and Newsblur. Can't log into any of them.
JustReader supports BuzQuz and Feedly. Can't log into Feedly.
GrazeRSS is an open source app, so can be potentially modified to work on Nook Simple Touch.
Luckily gReader works on the NST and allows to share articles to Pocket and Readability. Didn't manage to share via EvenClip since I can't install onto NST.
problems with gReader on NST
After testing gReader for a day I'm not so happy about it. The major problem is a lack of e-Ink theme. You may support this request at https://groups.google.com/forum/#!topic/g_reader/wcn6jLFQaY0
Another problem for me is with scrolling. When I scroll down in many cases it scrolls up. Tried to push harder and it helps sometimes, but still far away from usable.
And I can't find a way for NoRefresh to work with gReader. When I activate NoRefresh via the 3 downward taps, it seems that gReader thinks this is a gesture for it, so NoRefresh is not turned on.
I would also like to find a reader app that works with feedly on the NST. I would probably use my Nook to read my feeds more than actual books if I could get something working.
The best use for nook apart from reading is filtered news. I have installed a version of News and Weather which opens the links in my default browser (Opera Classic (Mobile)) and have setup my custom news keyword filters as on my other android devices.
RSS is much better. Best RSS app is gReader+ which does not have ads like greader. Reader+ is the second best reader IMO.
Since google shut down rss synching in July, you have a few options to have your rss feeds stored online for rss readers to setup with. Feedly is best and has its own web(works in opera classic) & app(not installable) reader too but it is too much like a magazine for me. Others are theoldreader (free) & bazqux (30 days free but good for import/export before 30 days). These are good as your rss account synch, their readers are not good for me.
I have tested many rss apps mentioned before in nooktouch threads. None of them are working properly. Only greader from market worked and imported my feeds. Problem is it has ads. I tried numerous apps mentioned here but most are dead, others fail import from feedly or theoldreader.
I tried about 20 versions of greader+. The old ones do not have import from feedly/theoldreader. The new ones fail on import mostly fail after pressing import from feedly/theoldreader, those few greader+ that do not and attempt stop saying untrusted network certificate error.
Very recent versions of greader+ actually do not run on NTS 2.1 android, screen just flashses and aborts. If anyone finds a working rss reader which imports subscriptions from feedly or theoldreader or bazqux, or import from files xml/opml let us know here what app and what version or even upload link or file. If I find a solution I will post.
Also import your subscriptions from feedly into theoldreader and bazqux and then export them (download) as both xml & opml files to backup on your PC, also zip & email to yourself and store in your keepers email folder..
In theoldreader site, in options setup a password and then to import elsewhere from theoldreader your id is the gmail email address and your password is the one you just setup, not your gmail password. Feedly uses gmail id & gmail password.
I actually use feedly for my rss management. Since feedly app does not work on nook I found a substitute. It's called "Feedme" and it works quite cool. Have bright theme so you could say it's somewhat optmised for einks. Only minus is no screen refresh. I just put my nook to sleep and wake it up if i want my screen refreshed.
flammenwurfer said:
I would also like to find a reader app that works with feedly on the NST. I would probably use my Nook to read my feeds more than actual books if I could get something working.
Click to expand...
Click to collapse
Then you may want to support the following ideas:
Offer Feedly's own login
http://feedly.uservoice.com/forums/192636-suggestions/suggestions/4080705-offer-feedly-s-own-login
(Android client) Support older version of Android
http://feedly.uservoice.com/forums/...droid-client-support-older-version-of-android
Problem logging in on Nook Simple Touch
http://feedly.uservoice.com/forums/...20259-problem-logging-in-on-nook-simple-touch
prosty said:
I actually use feedly for my rss management. Since feedly app does not work on nook I found a substitute. It's called "Feedme" and it works quite cool. Have bright theme so you could say it's somewhat optmised for einks. Only minus is no screen refresh. I just put my nook to sleep and wake it up if i want my screen refreshed.
Click to expand...
Click to collapse
I tried FeedMe, but didn't manage to log into Feedly. Just get an empty page likewise with any other RSS reader supporting Feedly.
What version do you use?
outlogic said:
I tried FeedMe, but didn't manage to log into Feedly. Just get an empty page likewise with any other RSS reader supporting Feedly.
What version do you use?
Click to expand...
Click to collapse
I'm using v1.3.6, also I didn't have such problem. It worked out of the box.
prosty said:
I'm using v1.3.6, also I didn't have such problem. It worked out of the box.
Click to expand...
Click to collapse
Interesting. How did you root your device? Do you use a custom kernel?
Personally I used ZeroChaos + NookManager + NTGAttack + NoRefresh + custom kernel #166 on my NST.
Feedly login used by most to authorize access feeds crashes with android 2.1 on NST. Feedme like many crashes on that for me.
Best way is to register with feedly, first, then via that with theoldreader, bazqux & ino reader And to import the xml & opml format file they generate to download.
greaqder was synched as I said before but it has ads in article list.
I got RssDemon from market to synch last night which is better as layout is similar and also gives dark theme. Better yet the ads appear not in article list but in article. It also opens links in my default browser, opera Classic aka mobile.
Better yet, I downloaded a copy of the paid version RssDemon elite last night with the license file to get rid of the ads.
JustReader also synched from market, similar enough layout to the two above, and typed in liNk (sdcard/feedly.opml) to synch feeds from file. Also a license file I downloaded worked. Exit generates crash log but does not matter as settings are remembered. Backup file generation does not work but with liceNse is ad free.
Best is ad free licensed rssdemon now, install Rssdemon elite old file, do not run, install license apk. then licensed justreader (market apk). Third best is greader from market with ads.
Best would be greader+ but newer ones crash, older ones feedly synch crashes, oldest oNes before July worked with Google rss only which is nowdead
wozhere said:
Third best is greader from market with ads.
Click to expand...
Click to collapse
I haven't seen any ads in free greader. But ZeroChaos filters ads somehow, so may this is the case.
And I don't mind paying for greader+ if the add an e-Ink theme https://groups.google.com/forum/#!msg/g_reader/wcn6jLFQaY0/V7XtZEutPIgJ and most importantly fix the problem with NoRefresh.
outlogic said:
I haven't seen any ads in free greader. But ZeroChaos filters ads somehow, so may this is the case.
And I don't mind paying for greader+ if the add an e-Ink theme https://groups.google.com/forum/#!msg/g_reader/wcn6jLFQaY0/V7XtZEutPIgJ and most importantly fix the problem with NoRefresh.
Click to expand...
Click to collapse
Zerochaos (i disabled root in config.txt) got stuck in launcher choice popup at start and many apps kept crashing while frozen. Had to restore a nandroid backup from yesterday. There is a clash with latest uimage I have probably.
The difference between greader & plus is the ads. I tried Zerochaos (Zerolab) as wanted adfree & anysoftkeyboard & Zeam (latest ones don't work). Can you upload these (/data/app or maybe in /system/app/)? Or at least tell us what versions they are?
AppBak generates a text file of installed apps/version number:
https://play.google.com/store/apps/details?id=org.moparisthebest.appbak&hl=en
P.S. No response from our friend. NVM. I tried from latest Zeam versions, a few days ago, but they didn't work on NST. Zeam Launcher is a free app, xda thread too, now sadly discontinued in favor of SickSky. I have used it as backup launcher, debugging etc., on my phones for a couple of years as it's so light. Usually use Nova. Versions 3.x don't work on NST. Versions 2.0.x work as do 2.2.x all the way up to 2.8.7 and 2.8.8. Versions 2.9.x and up don't work. Use v2.8.8. Advantage over ADW supplied with Glownooter is the dock can have more icons, I put 10 apps on it.
Also just installed a recent version of adfree, v0.8.66, seems to work.
I've figure out a workaround to the Feedly login issue: You can install the desired app on another android device, sign in to Feedly in the app there, and then back up the data, transfer it to the Nook, and restore it there. This worked for me for both JustReader and FeedMe, and probably works for any other app that runs 2.1. According to Feedly's API, they use OAuth with tokens that expire, but the app can refresh them. So if the app is coded correctly, in theory it should request a new token from Feedly without user input and you shouldn't see an expiration. However, if it does expire or require you to log into Feedly again for whatever reason, you would just need to redo the steps of authenticating on another Android device and then copying the data over.
Hope this helps!
not working
Akkifokkusu said:
I've figured out a workaround to the Feedly login issue: You can install the desired app on another android device, sign in to Feedly in the app there, and then back up the data, transfer it to the Nook, and restore it there.
Click to expand...
Click to collapse
I've been trying to do this but haven't succeeded yet. I installed FeedMe on my phone, logged in and transferreded both the folder at /mnt/sdcard/com.seazon.feedme/ and the file at /data/davlik-cache/[email protected]@[email protected] to the nook. I CHMODded both to match the native versions on the nook. So far it hasn't brought me success.
Is this the approach you are describing?
wozhere said:
The best use for nook apart from reading is filtered news. I have installed a version of News and Weather which opens the links in my default browser (Opera Classic (Mobile)) and have setup my custom news keyword filters as on my other android devices.
Click to expand...
Click to collapse
Can you share your copy of News &Weather that's compatible with opera mobile?
THANKS!
case-sensitive said:
Can you share your copy of News &Weather that's compatible with opera mobile?
THANKS!
Click to expand...
Click to collapse
Sure.
In settings, custom news topics, add your own keywords of special interest + delete topics not wanted.
I really like the older version of News and Weather that doesn't open an external browser but the scrolling difficulty caused me to abandon it. The BBC news app is marginally better and at least the text is resizable. I just find that the constant switching back and forth between a feed app and the browser in the more "recent" version of News and Weather is painful.
I'm trying NewsHog now and it behaves marginally better for scrolling, offers an optional condensation of the article and then an option to open the full article in an internal browser with the same sort of scrolling issues. SIGH. I wrote to the developers and suggested an option to port scrolling to volume buttons but afterwards realized this was not a good idea because the app comes with a TTS feature (of no use on the Nook ST, of course).
So...is there a way to switch back and forth between the feed app and the browser without closing the browser and then waiting for it to reopen when you select the next item? Seems so clunky--even for a rooted Nook ST
The whole point of this news widget (developer stopped, search xda, another guy copied the app & put ads on it) is setting it up with your personal keyword filters for news topics. If you don't haVe any special iNterest keywords to search for, you might as well use any other general news app.
To list recent apps & switch to: clicking and holding on the home icon in the app: Button Saviour
That's the right arrow on all pages in the pics here:
http://forum.xda-developers.com/showthread.php?t=2612340
I use the old pro version 1.5.2 (see list, it's in red) which works on NST, but the free version is in the NST sub-forums here too as part of an OS or something.
+
For:
Listing current & recent (greyed) apps + switching to + killing (long-press):
From homepage of android: TaskSwitcher by shisho (also in list)
Should Be on every anDroid homepage and/or dockbar
I think that I've found the problem with feedly auth, they use a certificate from RapidSSL that isn't included in android 2.1 if we include the certificate from GeoTrust Global CA (RapidSSL is an intermediate CA of GeoTrust) I think that should work
Hi everyone,
Now that the Lg Urbane 2nd can have standalone applications using data connection with AW 2.0 Dev preview 3, I think it is time to have a thread to list the apps that can either be sideloaded and work standalone in the watch, or wear apps that actually have standalone capabilities.
I'll start with a apk I found to stream some music right from the watch: PCRadio2016 ( https://apkpure.com/radio-online-pcradio-2016/ru.zfour.pcradio )
I sideloaded the full app with adb, and of course the interface is quirky, but you now have access to 10.000 radio station divided by genre right from your watch..
I haven't tried flashing the preview yet, but since you have I was wondering if OK Google commands now work as standalone. I'd go ahead and flash the developer preview if I was certain that the restore image was identical to the factory ROM on my Verizon watch. Thanks
ED2O9 said:
I haven't tried flashing the preview yet, but since you have I was wondering if OK Google commands now work as standalone. I'd go ahead and flash the developer preview if I was certain that the restore image was identical to the factory ROM on my Verizon watch. Thanks
Click to expand...
Click to collapse
Yes, Google voice works as standalone. All Google stuff is actually working very well (notifications for example), and i've been using the Preview 3 as a daily driver for more than a week now. Battery life is good, and the Whole experience is miles ahead in term of fluidity and ease of use. Only bad thing is that, because of the new playstore, you need to sideload all your apps manually until they arrive in the playstore.
Well, I took the plunge and so far I'm pretty impressed. I've side-loaded the GhostRacer wear app, and it appears to be running fine. Any chance you might have seen a way to get Play Music running?
ED2O9 said:
Well, I took the plunge and so far I'm pretty impressed. I've side-loaded the GhostRacer wear app, and it appears to be running fine. Any chance you might have seen a way to get Play Music running?
Click to expand...
Click to collapse
The only music app I managed to have working is the one I posted. No chance with anything else. The problem with Google play music seems to be that there is already a music play service installed that blocks the installation of any Gplay apk.
Thanks for the info. I recently discovered that the factory image linked on the developer preview site isn't really stock (at least for the Verizon version). After flashing it, I can set up calling on the watch. It keeps telling me to run a system update. Any suggestions?
Hey there,
Is there a location sharing app (Glympse or smth) that works on standalone mode?
Thanks a lot
Hi again,
Is there Google maps available on AW 2.0?
Thanks
gidi said:
Hi again,
Is there Google maps available on AW 2.0?
Thanks
Click to expand...
Click to collapse
Yes, you need to sideload the wear version of gmaps and everything works
Where can I download it from?
Hi there,
I`m using my watch since some weeks with preview 3 daily and it's pretty much better as v1.5 before.
These are the apps were I sideloaded the micro APK:
- Citymapper
- Fit (seems to work now from the Play Store as well)
- Keep
- MacroDroid
- Messenger
- Calculator
- SafeInCloud
- Watchmaker Premium
These apps I have installed directly from the embedded Play Store:
- Browser
- PaperCraft
Cheers
Axel
Hi, I need these standalone apps:
- task manager to view cpu/ram and for kills apps/services
- file manager to upload media files or apk file and view them
More or less the same daily use of the watch but very different battery drain, I suppose bad management services/apps
Sorry for my english
GiuloMaster said:
Hi, I need these standalone apps:
- task manager to view cpu/ram and for kills apps/services
- file manager to upload media files or apk file and view them
More or less the same daily use of the watch but very different battery drain, I suppose bad management services/apps
Sorry for my english
Click to expand...
Click to collapse
There is no such real working apps for AW 2.0.
GiuloMaster said:
Hi, I need these standalone apps:
- task manager to view cpu/ram and for kills apps/services
- file manager to upload media files or apk file and view them
More or less the same daily use of the watch but very different battery drain, I suppose bad management services/apps
Sorry for my english
Click to expand...
Click to collapse
Code:
adb install OSmonitor.apk
adb shell wm density 200
works for me on AW1.5
ESfileExplorer can also be sideloaded.
Hi,
very cool sideloading app: Flightradar24
Almost everything works like on the phone. Have a look on the screen shots.
Axel
If someone can try to sideload https://play.google.com/store/apps/details?id=bsoule.tagtime&hl=en and let me know if it'd works, it'd be awesome. I'm insta-buying an Urbane if it does! =)
I use (all sideloaded full apps):
Line Messenger
Facebook Lite
Facebook Messenger Lite
Greenify
For everything else bought the package from appfour, includes:
launcher (overlay)
email (sending+receiving standalone)
weaher app (not using actually)
nice keyboard
youtube player (standalone)
and a few other things (just look for the comapny)
to use the apps standalone, you have to choose this in the app at the beginning, if not you will always rely on phone connection (working as slave app, like normal aw wares)
what i've tried:
e-robot (works but on the small screen its a pain, the area where you choose events and actions is extremely thin)
kernel audiutor (some beta here on the forum)
clean my android (works, but i saw no imrpvements by using it)
I know i wish there were more fully functional apps for the watch..
I use NINE email on my phone.. and it has an app for the watch.. but it only allows me to do a voice memo? confused..
I would LOVE to find a better functioning SMS app..
I tried PULSE - worked great.. but missed a few group messages so not sure its reliable.
EVOLVE - looks like it has potential.. but only would let me respond to the last message in the conversation list.. even though it would show all of them.
Texpert - does show MMS Messages on watch.
Wear Messenger - confusing interface and doesn't show MMS Messages.
Messages for Android - doesn't show MMS messages
Google Messenger - MMS Image compression is horrible so didn't want to use as main SMS app on phone.
so if anyone else knows of an app that allows all messages to be viewed on the watch, let me know !
nice post, . . .
samsmith2152351 said:
nice post, . . .
Click to expand...
Click to collapse
Stfu bot