Database Develop

All messages open at end of message. Please help...

I'm using an AT&T Tilt with the default ROM, no modifications, just added software. My text and email messages are opening at the end of the message. The scrollbar is scrolled all the way down. On really long messages, like long emails, it won't be scrolled all the way to the end, but down quite a ways. Does anyone know what might be causing this, or how to fix it. Any help would be greatly appreciated. Thanks...

did ya install kaisertweak? I read somewhere on this forum that that tool is causing that problem

No, I haven't installed that. But thank you for asking. I may check those references and see if anyone with that problem has found a solution...

try this , and please let us know!
http://forum.xda-developers.com/showthread.php?t=337968&highlight=messages

That was it. Thank you for pointing me in the right direction! Your original hunch was probably correct. I haven't installed that program but I did manually edit the registry to do that tweak. I didn't even think it was relevant cause I thought it only affected PIE. Looks like I have lots more reading to do at these boards. Thanks again for your help, and quick response...

I posted this in another thread, I have the Tweak installed on my Tilt and have the 4-Way Nav already set to 1. It still does this, very annoying. Any other suggestions?

didn't work on my HTC TyTN II either the suggested registry value value was already 1. I've been fiddling with KaiserTweak earlier.

working on htc tytn2! finaly i do not need to scroll down.
(it was coused by tweak2k.net on my device)

patr!k said:
working on htc tytn2! finaly i do not need to scroll down.
(it was coused by tweak2k.net on my device)
Click to expand...
Click to collapse
What did you do? Please do share!

TheFuzz,
just follow this hint

patr!k said:
TheFuzz,
just follow this hint
Click to expand...
Click to collapse
Yea, been there, done that, still no luck. The default was already set to "1" so it must be something else. The investigation continues.

TheFuzz said:
Yea, been there, done that, still no luck. The default was already set to "1" so it must be something else. The investigation continues.
Click to expand...
Click to collapse
Same here. Did you find anything?

jahnotto said:
Same here. Did you find anything?
Click to expand...
Click to collapse
Nothing new, so I use Pocket CM now to do my texting, works much better anyways and has threaded messaging!

Quick GPS connection failed

Quick GPS send 'connection failed' message when I tried to refresh data. It is done through AS and 3G as well. Any correct solution?
Mikus

So, I don't have this problem but I know how to fix it because I've read all the pinned topics. Just for kicks I ran a search of "QuickGPS failed" and what do you know, I found the answer. Just a tip.

vanydotk said:
So, I don't have this problem but I know how to fix it because I've read all the pinned topics. Just for kicks I ran a search of "QuickGPS failed" and what do you know, I found the answer. Just a tip.
Click to expand...
Click to collapse
Then you see too: there are a lots of threads about it. Can you imagine, why? If you really found the solution for our problem, please tell it for all of us. Just a tip...

Mikus said:
Then you see too: there are a lots of threads about it. Can you imagine, why? If you really found the solution for our problem, please tell it for all of us. Just a tip...
Click to expand...
Click to collapse
Looks like you need another tip, start with the thread that says "quickgps on the kaiser *FIX*"
While you're at it, watch this video
http://www.albinoblacksheep.com/flash/posting

Use Kaiser Tweak to fix the Quick GPS problem
1.Download the Kaiser Tweak
2. Look for Tools (in the Kaiser Tweak), select the 'Default QuickGPS Setting', select 'OEM Settings (Def/Adv)'.
I hope it will work for those who is having such problem
All the best

vanydotk said:
Looks like you need another tip, start with the thread that says "quickgps on the kaiser *FIX*"
While you're at it, watch this video
http://www.albinoblacksheep.com/flash/posting
Click to expand...
Click to collapse
Smart video, I liked it, however the solution for my problem came from the very next post from 'ediirwan' - without any briefing tune. Peace

i hope it is working for u 'mikus'

Solve problem on HTCTP CDMA Sprint
Hi, I had this problem.
The solution:
Start->Settings->Phone->Services->Location->ON
Good luck.

try to check if quickgps service is started. mine was stopped.
to view services list use some program like fdcsoft taskmanager

Bluetooth Volume?

My bluetooth volume is really low on the headset, anyone else have this problem? Im using the Jawbone bluetooth headset on Dutty's v3 rom on my att tilt. Ive tried different roms, adjusting the volume to highest on the phone and the headset but callers are still hard to hear. Ive used the same bluetooth headset on my previous 8525 with no problems. My headset was even too loud when on high with the 8525. Any advice would be great because i do all my talking via bluetooth with my phone.

Yes, everyone has this problem - although I heard something about AT&T's latest ROM having some fix for the BT, but wasn't sure exactly what it fixed...

FIX?
Well if the problem was fixed either buy a chief here or htc or whomever, there should be a cab file floating around with the fix. thats what im hoping for or maybe a registry edit to help fix the problem. Ive read many threads on how the bluetooth volume suck for cars as well. Maybe if theres a fix for that, the same fix should fix my problem and many other's.

deeznuts said:
Well if the problem was fixed either buy a chief here or htc or whomever, there should be a cab file floating around with the fix. thats what im hoping for or maybe a registry edit to help fix the problem. Ive read many threads on how the bluetooth volume suck for cars as well. Maybe if theres a fix for that, the same fix should fix my problem and many other's.
Click to expand...
Click to collapse
Yeah as a matter of fact you can take this into your own hands. The latest AT&T ROM has a file called "AudioPara4-CWS_V6.csv" which I cooked into my new ROM (releasing tomorrow morning) as well. The thing is you don't need to "COOK" it at all. And it is simply a comma delimited spreadsheet. I have attached it so you can download it. Simply edit it as necessary for your headset, drop it in \Windows and add the following registry key to your device:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev]
"AcousticFile"="\Windows\AudioPara4-CWS_V6.csv"

Drop and Go?
So i just drop the unzip file u provided into my documents and edit the registry myself as u described? Sounds easy enough if thats all it takes. Whats the name of the rom u are releasing? Ill have to give it a try.

?
DARN! When i downloaded the file on my tilt and tried to open it i get the usual zip error of cant find the archive file crap. Guess ill have to wait to get home from work to try it on my computer.

deeznuts said:
DARN! When i downloaded the file on my tilt and tried to open it i get the usual zip error of cant find the archive file crap. Guess ill have to wait to get home from work to try it on my computer.
Click to expand...
Click to collapse
If you're using File Explorer select "Show All Files"...sorry I zipped it directly from my ROM and it has the hidden and system attributes set. Even on a Windows machine you will need to enable hidden files AND Protected OS files to be able to see it. And put it in \Windows.

Nope
Even after i check show all files on file explorer, then click on the zip file, get the same zip error when i try to open it.

EDIT> See next post.

alltheway said:
Any chance of making this a .cab?
Im having trouble trying to follow your instructions. Every time I unzip it, I can't seem to find it. Am I missing something?
Click to expand...
Click to collapse
Exactly, glad im not the only one that cant unzip this file. sounds like we just need to place a couple files in my documents then edit the reg. This might sound dumb but can u just upload the files a la carte that need to go to the my documents folder instead of making it a zip file? A cab that installs by putting these files and edits the reg would be too good to be true. Anyone up for the challenge?

deeznuts said:
Exactly, glad im not the only one that cant unzip this file. sounds like we just need to place a couple files in my documents then edit the reg. This might sound dumb but can u just upload the files a la carte that need to go to the my documents folder instead of making it a zip file? A cab that installs by putting these files and edits the reg would be too good to be true. Anyone up for the challenge?
Click to expand...
Click to collapse
Make sure you have hidden system files unchecked in Windows?
If you using Vista go to tools in any folder. Click on folder options.
go the view tab.
uncheck "hide protected operating system files"
XP should work the same way as well. This solved it for me.

Adding Registry Key
Hey I was just wondering if I did this right...or am I totally off?

alltheway said:
Hey I was just wondering if I did this right...or am I totally off?
Click to expand...
Click to collapse
Yes, you are totally off as AcousticFile is a String, not key.
Try the Cab I attached.
Anyone found this key w/ the cvs file really help anything as I don't see any problem w/ the current BT so far???

jackleung said:
Yes, you are totally off as AcousticFile is a String, not key.
Try the Cab I attached.
Anyone found this key w/ the cvs file really help anything as I don't see any problem w/ the current BT so far???
Click to expand...
Click to collapse
Thanks for the .cab
I was wondering if you could provide me with a screen show of what it should look like so I will know for future reference.
Thanks,
EDIT: Am I getting closer?

Whats this cab do?
Thanks for the cab file but whats it supposed to do? I installed the cab to the device then soft reset the phone. I then talked via bluetooth headset for 20 minutes after reset and the low volume was still there. Almost seemed the cab did nothing more then take up 16kb of memory on the phone. Didn't address the low volume problem in the bluetooth headset. It must be something with the phone because i know this headset gets very loud becuase ive used it on several devices and all being consistant except the tilt. Any other suggetions to fix this problem anyone?

you can try this:
Code:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\AudioGateway
Tell me what yours say for the "SpkVolume" setting ??
also...
I got this tip from somewhere before ... see if this help you ... it's for the BT handset mic volume ... but within those keys ... there should be one for the speaker volume as well ( you have to search for YOUR device ... as everyone's is different ):
quote:
""
Navigate to
Code:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\Device
Under this you would find several keys. Each key represents a device you are paired with. In my case I have only 2 keys since my PDA is paired only with 2 devices (my notebook, and my handsfree) Then navigate to the handsfree key, so mine reads like this.
Code:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\Device\000c55401c45\Services\0000111e-0000-1000-8000-00805f9b34fb
You would find a dword called name, verify that the value corresponds Hands Free
Change the channel to 5 (my default was 2) 5 seems to work better with Motorolla H500.""
goodluck

Bump for some more info.

If you search the forum you will find a few posts on this subject. I have been searching through them just about every day and I have had no luck in finding an answer. Seems editing the registry doesnt help and the BT fix cab was released by HTC to fix bluetooth headsets dropping calls. I have tried the fix and I have tried using Jetware, I have not tried the registry fixes because many others have tried and said it doesnt work. Ive been through 4 headsets and non have good volume. I am still waiting on someone to find a working solution or a reasonably priced headset (below $100 thats non-stereo) that works. I think you may be stuck for a while like so many others....

Man, that sucks. I never get dropped calls on from using bluetooth, only when the phone drops the calls from ****ty att service. Guess thats why the cab didnt help out with increased volume. i did tons of searching beforestarting this thread and like u found nothing so i decided to post and see what happens. Quentin stated above he fixed the problem in his latest rom released today, 1/14/08, so i guess ima have to try his rom out to see if it helps. i really dont want to leave dutty's 1.1 rom cus of opera 8.65 and his great features cooked in. i love how dutty has the battery status under htc home with the exact percentage of battery life. anyone have a cab for that feature dutty cooks into his roms? thanks!

deeznuts said:
Man, that sucks. I never get dropped calls on from using bluetooth, only when the phone drops the calls from ****ty att service. Guess thats why the cab didnt help out with increased volume. i did tons of searching beforestarting this thread and like u found nothing so i decided to post and see what happens. Quentin stated above he fixed the problem in his latest rom released today, 1/14/08, so i guess ima have to try his rom out to see if it helps. i really dont want to leave dutty's 1.1 rom cus of opera 8.65 and his great features cooked in. i love how dutty has the battery status under htc home with the exact percentage of battery life. anyone have a cab for that feature dutty cooks into his roms? thanks!
Click to expand...
Click to collapse
U don't have to limit what rom to use to have this so called BT volume fix (which I am not sure if it really working or not), just use the cab I package above.
For that battery status today plugin, you can find it here too: http://www.chi-tai.info/cs_BatteryStatus_XDA_Neo_WM5_iM_cs.htm
edit: I just noticed you are using Dutty's 1.1 rom. U can try my rom here which based on his 1.1 rom but w/ a few enhancement: http://forum.xda-developers.com/showthread.php?t=357490

Help! Device memory only 4MB

Firstly forgive me if this has already been dealt with, but I did a search and couldn't find anything.
My device is showing 4.1MB free of 133MB, which seems very low. I don't think I've downloaded anything significant but I don't know how to find major files which shouldn't be there.
Any help would be appreciated.

Do you archive your text messages, and never erase them? You might have a build up of picture / video mail, if you do that excessively.

Ni I delete them

Is your device running sluggish.
If it's not you are creating a problem out of nothing.
Maybe you have too many CABs or programs installed. Think about removing some.
But if you have your phone how you want it and its not running slow, then don't worry about it. Why have memory you're not going to use.

It's not running sluggish at all. I was just concerned that 4 out of 133MB didn't seem much!

What ROM are you using? It might have a dynamic Page poll which means It will use what it can.

JimmyMcGee said:
What ROM are you using? It might have a dynamic Page poll which means It will use what it can.
Click to expand...
Click to collapse
I knew this might get a bit heavy for me!
How do I find that out?

compimeh.0409.dat
You may want to search your windows directory for this file. I came across a post several days ago and it amazed me. I am not sure if anyone found a solution for this yet. Here is the thread you may want to read and the links included if you find this file on your device...
http://forum.xda-developers.com/showthread.php?t=407180
you may want to try a hard reset see if it fixes the issue but back up your data.

I've previously used TreeSize. Try googling for 'treesize ppc'.
It's an old app, but does its job perfectly. It'll show you whats using your storage space.
'tunes

mad_tunes said:
I've previously used TreeSize. Try googling for 'treesize ppc'.
It's an old app, but does its job perfectly. It'll show you whats using your storage space.
'tunes
Click to expand...
Click to collapse
http://pocketpcwares.blogspot.com/2006/12/todays-highlight-treesize-v10003.html

Maybe you accidentally hit the record button?

Thanks to Kaze0110 and mad-tunes. I downloaded treesize and found a 77MB music file!!!

How to make IE default browser.

So after 40 minutes of wasting time (searching how to do it) I got nothing.
Anyone know how i can make Internet Explorer the default browser? I tried and couldnt find it.. An answer is all i am looking for.

This was originally named something else, but I renamed it so I could find it again. It's buried in a thread somewhere.
Anyway, this restores the registry settings for IE and has fixed IE getting hosed a few times. By Opera, or seemingly randomly. I've had to run this at least 3 times in the last 3 months.

THANK YOU VERY MUCH.. you made my day :]

Thanks
Thanks works perfectly on my T-Mobile wing

This worked on my Fuze too. It is a big help.
Thanks,
cj

Code/ Steps to create the cab file
hi,
Can anyone please let me know the xml registry coding used for the same and the procedure for creating this as a cab file? I am really interested in knowing the coding for the attached cab file []
Regards
Amajor

ankit.to.excel said:
hi,
Can anyone please let me know the xml registry coding used for the same and the procedure for creating this as a cab file? I am really interested in knowing the coding for the attached cab file []
Regards
Amajor
Click to expand...
Click to collapse
There are cab extractors I'm sure that could be used on it, but otherwise I wouldn't have a clue, I just saved it from another thread. I couldn't find the thread, so I just attached the cab I'd saved.

ankit.to.excel said:
hi,
Can anyone please let me know the xml registry coding used for the same and the procedure for creating this as a cab file? I am really interested in knowing the coding for the attached cab file []
Regards
Amajor
Click to expand...
Click to collapse
Unzip it was WinRAR and have a look at the _setup.xml.
Or try a product like WinCE CAB Manager, or any other good cab creation software
Or just google, creating CAB files, there's lots of suggestions
Ta
Dave

IE vs. Opera
So I have tried switching OPERA TO IE on
tf3d but cant get it. Any ideas? Ive tried using total commander, and using mem. card to laptop and back.

khaytsus said:
This was originally named something else, but I renamed it so I could find it again. It's buried in a thread somewhere.
Anyway, this restores the registry settings for IE and has fixed IE getting hosed a few times. By Opera, or seemingly randomly. I've had to run this at least 3 times in the last 3 months.
Click to expand...
Click to collapse
THANK YOU!!

Hi Just a question.
Can you uninstall the app once it has set IE back to the default? Will this leave IE as the default?

thanks
[thanks its working

thanks
thanks it is working

Sorry if this is a newb question. It's working with email links, but how do I change the HTC touchflo settings to make IE the browser that is invoked from the touchflo menu at the bottom of the screen? I can't seen any touchflo settings besides the thing about sounds when finger scrolling, etc.

khaytsus said:
This was originally named something else, but I renamed it so I could find it again. It's buried in a thread somewhere.
Anyway, this restores the registry settings for IE and has fixed IE getting hosed a few times. By Opera, or seemingly randomly. I've had to run this at least 3 times in the last 3 months.
Click to expand...
Click to collapse
Thanks GREAT!!!!!!!!

khaytsus said:
This was originally named something else, but I renamed it so I could find it again. It's buried in a thread somewhere.
Click to expand...
Click to collapse
Hey, thanks for this. It works 100% tested on an XDA Zest
-------------------------------------------------------------------
http://flymustang.com
http://theflightstuff.com

ankit.to.excel said:
hi,
Can anyone please let me know the xml registry coding used for the same and the procedure for creating this as a cab file? I am really interested in knowing the coding for the attached cab file []
Regards
Amajor
Click to expand...
Click to collapse
stevation said:
Sorry if this is a newb question. It's working with email links, but how do I change the HTC touchflo settings to make IE the browser that is invoked from the touchflo menu at the bottom of the screen? I can't seen any touchflo settings besides the thing about sounds when finger scrolling, etc.
Click to expand...
Click to collapse
Welcome on board!
By searching & reading this greatest smartphone forum in the world you can find the answers of 99% of your questions. First please go to the General >> About this forum section to learn have to make good use of this site.
Glad we have more curious members now!

wg5566 said:
Welcome on board!
By searching & reading this greatest smartphone forum in the world you can find the answers of 99% of your questions. First please go to the General >> About this forum section to learn have to make good use of this site.
Glad we have more curious members now!
Click to expand...
Click to collapse
Nice way to avoid answering his question.

Thank you, you have helped me a lot!!
I've wasting my time looking for a solution for this, as just making an association ended up in infinite loop! (this Microsoft sh*t!), but your program solved it!!!
Thank you from Spain!
David Bluecame.

khaytsus said:
This was originally named something else, but I renamed it so I could find it again. It's buried in a thread somewhere.
Anyway, this restores the registry settings for IE and has fixed IE getting hosed a few times. By Opera, or seemingly randomly. I've had to run this at least 3 times in the last 3 months.
Click to expand...
Click to collapse
----> Thanks!
This worked on my HTC Touch Pro and my HTC Touch Pro II ...Opera just isn't ready to be the default browser. Too much overhead, its just too slow (even on the Touch Pro II) and I just cant count on it for viewing web pages consistantly like I can with IE. One day I will be able to watch a YouTube video on my Windows Mobile phone ...still waiting for that day. The Droid certainly is a fast bugger and can you tube but between the keyboard and the excessive power usage ...and quite honestly lack of application support ...I am sticking with Windows for now. This little fix made my life much better. Thanks again.