Bluetooth stereo headphones - noise while playing music - Touch Diamond, MDA Compact IV General

Hi,
I have Nokia BH-503 and I use it with my Diamond. Main problem is that when I play music the quality is quite good, but I can hear noises in most of my songs :/ I tried to change ROM: I used Dutty v.3.4, Karamba v.3.4 and Dutty v.3.6 - without any difference.
On my SE W890i there is no such problem - headphones work perfectly, so they are efficient in 100%.
Does anybody know what might be the problem? Please help because it's starting to get a little bit annoying :/

I'll answer myself then
Very helpful in that kind of situations is Advanced Configuration Tool [I used v.3.3], because it makes possible to change some settings related to Bluetooth.
I set some options as shown bellow:
OBEX: disabled
use join sterro: no
bitpool: very high
max supported bitpool: 75
min supported bitpool: 60
Now my music sounds way better

Related

XDAIIi & HT820 !!!!!

done it - all working fine wonderful......
but right hand side buttons not functioning i.e. play, stop, skip....
any ideas?????
8)
Got working too but treble spikes
I got my Qtek 2020i to work with the HT820 headset both with calls and music but with the music the treble spikes.it can be a lil anoying especially with a song that uses drummer playing on the metal disc(not sure wat it called) I tried a mp3 192kbps and still u can hear it. any suggestions. I downloaded a cab file to get the music working is there any other cab or file i could try?
So, is there an update to this? i.e. Play / Skip Buttons?
I seem to have the same problem and wondered if anyone has sorted it yet?
Cheers
Just use TCPMP(www.corecodec.com, www.tcpmp.org) player and turn on Broadcom Button support in adv. options.
I am using my headphones with full button support.
Just use TCPMP(www.corecodec.com, www.tcpmp.org) player and turn on Broadcom Button support in adv. options.
I am using my headphones with full button support.
Cool Installed it works like a dream mose of the time,
But do get some drops where the Audio descdides to stop going throught he HT820 and through the normall speakers?
Simply incerase file cache from Automatic to 2048Kb and your system will be much faster. Also, it will solve problem with incorrect sound routing(bluetooth sound transfer occupies anout 40% of cpu time sometimes, including MP3 decodning).
Sorry dumb question but where do I find that setting?
I can see Options > Settings > Select Page > Buffering > Normal BUffer Size is set to 2400KB already?
Cheers
Ok an Update now, I had 0.72 RC 1 installed so thought I'd go back a version to 0.71.
THe same settings are there and changed, Now if I get a call, answer with left button, put down with left button the audio gateway goes. the right hand side still works but no audio to the headphones, only way is to disconnect bluetooth connection and reconnect.
Very Strange. I wonder if we will ever get this to work as it should lol,
Re: Got working too but treble spikes
Robert6 said:
I got my Qtek 2020i to work with the HT820 headset both with calls and music but with the music the treble spikes.it can be a lil anoying especially with a song that uses drummer playing on the metal disc(not sure wat it called) I tried a mp3 192kbps and still u can hear it. any suggestions. I downloaded a cab file to get the music working is there any other cab or file i could try?
Click to expand...
Click to collapse
If you mean spikes as in distortion in the sound, that's most probably because your sound level is too high. Turn down the volume of your headset, and it'll sound fine. I experience this problem if I turn my headset up too high, it's a design flaw (in my humble opinion) of many bluetooth headset devices, but unfortunately it's quite common.

Enable A2DP and/or headset profile for Tilt...

Hello everyone...sorry for bothering, but I'm so frustrated that I'm about to scream...I really need some help here.
I have an AT&T Tilt (Kaiser) running their standard ROM. I just bought a Motorola H780 bluetooth headset for it. The salesperson said that he knew of some people who connected this model to their Tilts and was able to listen to music through it...and even on earpiece box it says that the H780 supports both the Hands Free and Headset profiles. However, I have not been able to accomplish this: it pairs for normal use (phone calls, etc), but nothing else. The "wireless headset" option is greyed out for me; the earpiece only gives me the option to connect using "Hands Free" profile.
I have looked...and looked...and looked for how to do this. The best I found from Google was for people who have Windows Mobile 5 (I have 6)...and even so, I tried a couple of those registry tweaks. On here, I keep running into countless forums that tell you, not how to enable A2DP, but how to improve it (using modified bitpool value in the registry, etc). Can SOMEBODY PLEASE tell me how in the world to get this working? I would really appreciate it...THANKS!
Well this is how i do it. I downloaded this http://www.teksoftco.com/index.php?section=freeware
that is the page then you get a2dp toggle
and then when my bluetooth is on the the headset is on i then go to this program and double click it and it puts another icon by the bluetooth icon and i get sound that way for my music and also calls still come threw too. I am not saying this is the right way but it works great for me...
bluetooth toggle
bluetooth toggle turns on the headset (single ear normal everyday talking sets) like a speakerphone.
all audio will get directed to it, im, e-mail, meeting announcements.
I had a sony headset model, with 12 talk time, nice because it will eat your battery while on ( tilt and headsets rated for talktime will apply to this ) . my plantronics only does 4 hours, so at lunch or when not in use I charge it and phone via usb cable.
I am in IT and most peaple are ok with me wearing bt headset (plantronics 655) and write me off on the gadget side when I wear it 24/7. In reality I listen to music (10% volume on audiomanager) all day (literally) from my 8 gig card.
I have streaming and resco radio, and podcasts. Mostly I converted my common mp3s to wma to have more on the phone and high audio cd quality is not to be expected over bluetooth. The right rom and radio are very helpful and the ability to tun off screen but still play music are all important or battery will suffer even more. using the stock rom and radio will work, just not a good balance team.
duttys roms and a few others had it included btw. I found a way to use audiomanager 1.2 on the new roms with 1 registry setting change to allow suspend mode.
I use a very simple version of it. I attached it because, I searched a bit to find a link, (still recommended for education on the subject) but didn't find it or in the chefs and mods downloads either.
Thanks to both of you for your responses! I appreciate someone taking the time out to help.
Blinkste21957, I tried your solution and it didn't work...for some reason, it saw my headset as being "unusable" (my term) with regards to headset mode. I don't quite know why; my headset clearly says on the box that it is. (Motorola H780). This is why I think that there must be something missing on my phone that will enable the "headset" option for my earpiece.
Acehole, I tried your solution a while back...but it was with the 8525, not the tilt, and with my (previous) plantronics headset. I was less-than-impressed with the problems I had to deal with last time...but I could give it a whirl again with this phone/headset and see what happens.
If anyone knows of anything else I'm missing in terms of "activating" the headset capabilities of my phone (which I thought was supposed to have A2DP), let me know. I'm just very puzzled why, for an earpiece that supports headset mode, my phone would have that option unavailable.
Actually, I think that it is the phone and not the headset. When I had a nokia I was able to listen to music via my bluetooth with no issues. The tilt will not allow you to do this without the use of a third party application. The following is what many people have used and are using as a work around. BTAudio, BlueMusic, A2DPToggle. Tech soft makes BlueMusic and the A2DPToggle and can be found here: http://www.teksoftco.com/index.php?section=products. Unless one of the bright developers here on XDA takes this on, I fear that it will never truly be resolved.
Thanks ACEHOLE.. I was struggling with my iMate.
Someone on here recommended the Sony DR-BT22 some time ago. I bought a pair and they link up and sound is impressive on the Tilt with Windows 6.1
http://www.bestbuy.com/site/olspage.jsp?skuId=8458466&st=bluetooth&type=product&id=1184369168158
I can also control forward and reverse functions of the player with them too.
Bluetooth - especially compatibility - is still one temperamental beast! My car's built-in hand-free made me and the poor guy from AT&T a believer. They can plaster A2DP, HSF, HDP, ESP, JMDP, whatever on the box and it it means squat as to whether it will work or not. Only ones that do are manufacturer-to-manufacturer....sometimes.
Mack
If you have WM 6.1, and if you have a headset with the A2DP profile (NOTE this is not the same as the "headset" profile) then you can listen to music without any problem. If you don't have both, then you need to mess with the software add-ons mentioned earlier in this thread .
As for me, I got the excellent Jabra BT8040 and it works great with My Kaiser with stock 6.1. Only about $30 too.

Play Music via Bluetooth "fixed"

This is my first, and only a minor, contribution to the forum; I've been a feeder up till now.
I bought a cheap bluetooth headset for my HD2 for use with my motorcycle satnav and also my HD2 - not that I want to take calls whilst I'm riding, but playing music would be a possibility. It was similar to this:
http://cgi.ebay.co.uk/Bluetooth-V2-...e_Phones_Bluetooth_Acc_ET?hash=item3efab16de4
I paired it with my satnav and could hear voice commands and music as expected. I then paired it with my HD2 and could only get calls, no music playing!!!
I tried looking for settings on the HD2 but nothing made any difference so I decided to look in the registry. After a while exploring I eventually found:
HKLM/software/widcomm/BTconfig/devices/
There were three devices paired (HD2, satnav and my car) so next I had to work out which one. I found that if you look at the nickname for each one, it's decoded into english by the Reg Editor (I use CERegistryEditor). Using trial and error I found that changing the setting "Hideconnections" from "0" to "1" did the trick. I can now hear music through the headset!!!
Well chuffed with myself!!!
PS Perform a soft reset after changing it to lock it in otherwise it resets to "0" after a disconnect.
OOPS! because I was looking for Bluetooth stuff I posted this in the wrong area, sorry!!! Maybe a moderator can correct please?
How bizarre it works by default for me......well done on the find though
Thanks...
It doesnt work for me, im using samsung mono bluetooth. I've tried many methods like btaudio bttoggle.... any help, thanks
All I can suggest is that - like I did - compare settings with something that does work. Maybe because you have a mono headset (mine is stereo) it's not capable of receiving music?
Hi
I could play music and receive system sound in my Jabra mono bluetooth earpiece if, in HD2, I go bluetooth->advance->Audio and check "play system sounds on remote hands-free device". However, after a phone call, the music and sound will be routed back to the phone speaker, though the earpiece is still connected (you can still make/receive phone calls through the earpiece).
The music and sound can only be routed to the earpiece again after a soft reset.
The other observation is that, if there is pause in between music or sound for a period of about 12 to 15 seconds, the HD2 will "suspend" the bluetooth transmission (beep in the earpiece) and resuming the music will cause the bluetooth transmission to be re-established (beep sound in earpiece). This is causing skipping of the first 1 to 2 second of the music / sound.
Have installed BTaudio V1.0. It is working on my HD2 and will keep the transmission constant and no skipping problem.
However, also needing soft reset after phone call.
Does any one has similar experience ? Is this earpiece/ head set related of is this HD2 related issue ?
No one has simialr experience ? Is there a thread on bluetooth related registry tweaks, I have been searching for it but don't seems to be able to find one. Any help will be appreciated.
anzudragon said:
It doesnt work for me, im using samsung mono bluetooth. I've tried many methods like btaudio bttoggle.... any help, thanks
Click to expand...
Click to collapse
+1 as well
I have a Samsung WEP420 mono bluetooth and no success either.
Armes said:
I tried looking for settings on the HD2 but nothing made any difference so I decided to look in the registry. After a while exploring I eventually found:
HKLM/software/widcomm/BTconfig/devices/
Click to expand...
Click to collapse
I don't have that reg key at all! I have a dutch hd2 running stock 1.66. When I try to connect to a parrot party bluetooth stereo box this (most of the time) doesn't work. Once or twice I established a working connection but after trying multiple times with no luck I decided to find a fix for my problem. Now I try to edit my reg with this and it's not there!?
i paired the hd2 with the car kit parrot ck3100... leaving apart that it doesn't connect always... although i have checked in settings to play all phone sounds through BT it doesn't...
i think it's a BT problem of the hd2, or maybe all WM phones... 'cause ițve had issues like this before...
P.S. once it played the music thorugh the car kit... just like this...

Mate 10 Pro LDAC Playback Quality

Hi, got a Huawei Mate 10 Pro BLA-L29 8.0.0.136(C185) and a Shanling M0 as a Bluetooth receiver. When I get them connected using LDAC, there are two menu sections where I can set the audio quality to be fed to the M0. One is the Developer Options where, apart from selecting the BT codec itself, I can set sample rate at 44.1 to 96 kHz, bit depth of 16 to 32 bits per sample, and stream bitrate at 330 to 990 kbps. These settings behave in a weird manner, always reverting to default every time I disconnect the BT or even while it's connected. The other instance is the properties of an individual BT device where I can set the LDAC playback quality to either "Optimized for audio quality" or "Balanced audio and connection quality".
Problem: if the BT device is "Optimized for audio quality", I only get decent transmission if stream bitrate is set to 660 kbps or lower in the Developer Options. Inversely, if the latter is set to 990 kbps, it only works decently if the device-specific setting is "Balanced audio and connection quality". If both are set to maximum audio quality, the playback starts gagging violently, interruptions happening up to twice a second if the phone is active and like once every five to ten seconds if the screen is off (the two devices 5 inches away from each other with nothing but air between them).
I brought the Shanling M0 to the nearest Sony store and paired it with a demo phone with LDAC audio quality set to 32/96 at 990 kbps and it worked like a charm without a single hiccup.
Anyone else has this issue and/or aware of a fix?
I have been to a number of stores since the original post and was able to pair my Shanling M0 to various devices:
1. Huawei P20, Android 8.1, Bluetooth 4.2 - same problem.
2. Samsung Galaxy S9+, Android 8.0, Bluetooth 5.0 - no problem.
3. Samsung Galaxy A6, Android 8.0, Bluetooth 4.2 - no problem.
Apparently, Android version is not responsible for the malfunction, neither is Bluetooth version. It's the manufacturer.
Crap, crossing fingers about having this issue fixed. Have you reported it to Huawei customer service and Shanling's one ?
Thank you for the feedback. I'm interested in this small DAP (nostalgic for my beloved Sansa Clip), even if I'm quite sure I probably won't use the Shanling M0 as BT receiver.
Scalpos said:
I'm interested in this small DAP (nostalgic for my beloved Sansa Clip), even if I'm quite sure I probably won't use the Shanling M0 as BT receiver.
Click to expand...
Click to collapse
If you ask me, you should just grab your money and go get it, because it works fine with other phones than Huawei. Even with mine, if I set it to "Balanced audio and connection quality", it's doing great. Actually, the LDAC standard bitrate of 660 kbps is amply sufficient to deliver music from major streaming services like Google Play Music. Whatever the problem is, I don't believe it's Shanling's fault, because the intensity of gagging depends heavily on whether the phone screen is on or off, which has nothing to do with connection quality.
As to the DAP itself, I find its sound signature and stage presentation nothing short of amazing, at least on par with my favorite Hidizs AP100 and far better than vivo Xplay6 or anything else I tried. Sansa Clip+ is nowhere near. The way I feel right now, I'm far more likely to ditch the Huawei phone than the Shanling DAP, because there are reasonable alternatives to the former, but not the latter.
anton79ru said:
If you ask me, you should just grab your money and go get it, because it works fine with other phones than Huawei. Even with mine, if I set it to "Balanced audio and connection quality", it's doing great. Actually, the LDAC standard bitrate of 660 kbps is amply sufficient to deliver music from major streaming services like Google Play Music. Whatever the problem is, I don't believe it's Shanling's fault, because the intensity of gagging depends heavily on whether the phone screen is on or off, which has nothing to do with connection quality.
As to the DAP itself, I find its sound signature and stage presentation nothing short of amazing, at least on par with my favorite Hidizs AP100 and far better than vivo Xplay6 or anything else I tried. Sansa Clip+ is nowhere near. The way I feel right now, I'm far more likely to ditch the Huawei phone than the Shanling DAP, because there are reasonable alternatives to the former, but not the latter.
Click to expand...
Click to collapse
Indeed, I started following Head-fi.org's thread few weeks ago, this device looks great.
I currently own a Cowon Plenue D for more than 2 years, I'm quite happy with it: relatively small, great battery life and sound. But I'd like to have a smaller good DAP I can bring with me when I run, or simply don't want to suck smartphone's battery. I bought a Sansa Sport Clip+ (BT DAP) one year ago, crappiest DAP I ever met...
What's your battery life experience using BT head/earphones wiht this DAP ?
Hello there,
Just to share the using LDAC experience with a mate 10 pro (BLA-L29 145 (C432))
I have a Sony headsets (WH-1000XM2) and it works just fine, I'm able to use LDAC perfectly, sound is very good but you need to be close to the phone, 5m apart and it starts to break.
I know its not the same situation, but this is my experience.
Best regards.
And the volume?
Mine with my sennheiser 4.50 BT NC is very low..
Scalpos said:
What's your battery life experience using BT head/earphones wiht this DAP ?
Click to expand...
Click to collapse
I have no such experience, I only use M0 as a BT receiver with wired IEM connected to it. I never even bothered to measure battery life, since it's more than two days of my regular use, i connect it to a USB port earlier than I need to charge.
sartan said:
And the volume? Mine with my sennheiser 4.50 BT NC is very low.
Click to expand...
Click to collapse
If you want to control volume on your headphones, you need to set it to maximum on the DAP. The rest of it will be the responsibility of your headphones' integrated amp - if the volume's too low, then it's just not powerful enough, there is no way a bluetooth source can fix that, as it does not transmit loudness.
sadmam said:
Hello there,
Just to share the using LDAC experience with a mate 10 pro (BLA-L29 145 (C432))
I have a Sony headsets (WH-1000XM2) and it works just fine, I'm able to use LDAC perfectly, sound is very good but you need to be close to the phone, 5m apart and it starts to break.
I know its not the same situation, but this is my experience.
Best regards.
Click to expand...
Click to collapse
Thank you very much indeed, because that's exactly the diagnostic step that I missed. Need to try that to locate the problem more precisely. Are you sure that the LDAC playback quality setting in your bluetooth device options was at "Optimized for audio quality"?
anton79ru said:
I have no such experience, I only use M0 as a BT receiver with wired IEM connected to it. I never even bothered to measure battery life, since it's more than two days of my regular use, i connect it to a USB port earlier than I need to charge.
If you want to control volume on your headphones, you need to set it to maximum on the DAP. The rest of it will be the responsibility of your headphones' integrated amp - if the volume's too low, then it's just not powerful enough, there is no way a bluetooth source can fix that, as it does not transmit loudness.
Click to expand...
Click to collapse
With other smartphone is working perfectly and with strong volume.
Where is possible to maximize the volume on the DAP? Simply with volume buttons?
Thanks.
sartan said:
With other smartphone is working perfectly and with strong volume.
Where is possible to maximize the volume on the DAP? Simply with volume buttons?
Click to expand...
Click to collapse
I would suggest that you go to the Shanling M0 thread on head-fi, there's a company representative on that forum who's very cooperative, you should describe your issue to him. I wish I could give you a hand, but my experience is limited to operating the volume wheel on the DAP.
anton79ru said:
Thank you very much indeed, because that's exactly the diagnostic step that I missed. Need to try that to locate the problem more precisely. Are you sure that the LDAC playback quality setting in your bluetooth device options was at "Optimized for audio quality"?
Click to expand...
Click to collapse
Yes... it has to be... or it wont use LDAC at all... it will use APTX or something else... LDAC is only used on the setting "Optimised for audio quality".

Abysmal Bluetooth audioquality of headphones on the mi9 lite

Hey,
I switched from the Redmi Note 4 Global to the Mi 9 lite and everything about the phone is pretty great, except the audio quality over headphones.
I am a bit shocked how terrible it is in comparison. I used my QCY T1 and the Redmi Airdots - both bluetooth - to compare and an older cable bound pair of bose truesound inears.
Issue 1:
The software equalizer just doesnt work on the mi 9 lite. You can use the dials in any music-player app without anything changing actually in the sound. I tried phonograph and poweraudio pro. When I activate the software equalizer on the RN4 the difference is instantly recognizable and I do mean instant. Everyone would notice the sound changing. On the Mi 9 lite nothing changes when I change preset, bass, surround value or even the the actual frequency values.
Issue: 2:
The sound is really low on bass and there is an ever-present hissing on higher frequencies. The whole thing sounds muddy and poor on details.
How did no one notice this of all of those reviewers? The phone is basically DOA if you use your phone listen to music in any way. It basically sounds like terrible nokia headphones they added to the phone from 2003. I cant overstate enough how terrible the sound is.
Please help me understand. This should only be a DAC issue for the cable-bound headphones (the bose ones), right? Bluetooth doesnt actually change from digital to analog, does it? So is this just a question of fixing the bug that the equalizer doesnt work?
AgathoN667 said:
Hey,
I switched from the Redmi Note 4 Global to the Mi 9 lite and everything about the phone is pretty great, except the audio quality over headphones.
I am a bit shocked how terrible it is in comparison. I used my QCY T1 and the Redmi Airdots - both bluetooth - to compare and an older cable bound pair of bose truesound inears.
Issue 1:
The software equalizer just doesnt work on the mi 9 lite. You can use the dials in any music-player app without anything changing actually in the sound. I tried phonograph and poweraudio pro. When I activate the software equalizer on the RN4 the difference is instantly recognizable and I do mean instant. Everyone would notice the sound changing. On the Mi 9 lite nothing changes when I change preset, bass, surround value or even the the actual frequency values.
Issue: 2:
The sound is really low on bass and there is an ever-present hissing on higher frequencies. The whole thing sounds muddy and poor on details.
How did no one notice this of all of those reviewers? The phone is basically DOA if you use your phone listen to music in any way. It basically sounds like terrible nokia headphones they added to the phone from 2003. I cant overstate enough how terrible the sound is.
Please help me understand. This should only be a DAC issue for the cable-bound headphones (the bose ones), right? Bluetooth doesnt actually change from digital to analog, does it? So is this just a question of fixing the bug that the equalizer doesnt work?
Click to expand...
Click to collapse
The sound is incredibly good here on both wired and wireless headphones.
NaassomDourado said:
The sound is incredibly good here on both wired and wireless headphones.
Click to expand...
Click to collapse
I'm thinking of buying this phone and audio quality is important to me. Could you tell us which wired and wireless headphones have you tried?
---------- Post added at 11:44 AM ---------- Previous post was at 11:40 AM ----------
AgathoN667 said:
Hey,
I switched from the Redmi Note 4 Global to the Mi 9 lite and everything about the phone is pretty great, except the audio quality over headphones.
I am a bit shocked how terrible it is in comparison. I used my QCY T1 and the Redmi Airdots - both bluetooth - to compare and an older cable bound pair of bose truesound inears.
Issue 1:
The software equalizer just doesnt work on the mi 9 lite.
Click to expand...
Click to collapse
This isn't good. Audio should be fine with good headphones without equalizer, unless your headphones require an amp. In any event, have you tried eqfy from the play store?
Have same problems. Is problem in miui?
No problems over here tho. I upgraded from a Redmi Note 4x as well but kinda forced since a very damaged screen. No problems with wired Xiaomi Mi in Ear Pro, Haylou GT1 and Audio Technica ATH-ANC700BT.
Well I did have a problem with settings since Bluetooth would become Choppy/stuttery. To fix that I had to turn off battery optimization for Spotify, YouTube and Music. Music quality seems to be decent but I can't remember stock Redmi Note 4 sounds cause Viper4Android was very sweet.
Okay, here's what I came up with after a few days of more testing:
The core issue is that the eq that comes with mp3-player apps doesnt seem to work - the dials for bass boost and surround sound are without any actual effect.
I rarely use spotify because I am oldschool and still use mp3's - so I cant say if the EQ works for spotify.
First I tried changing my country to USA and rebooted the phone and audio got way louder immediately. My Redmi 4 didnt have this BS.
Next I tried EQ-apps like "bass booster", "Equalizer FX" and one simply called "Equalizer". That kind of does the job, but is also only partially working. All of these apps come with a notification addition that give you easy access to their function. Most of them got an on/off switch there. Switching this on/off immediately makes the sound better and actually useable. BUT every other function of all of these app doesnt work. Dialing bass - doesnt work. Dialing surround - doesnt work. Selecting a reverb option like "small room" - doesnt work. Selecting a different EQ preset e.g. "Rock" doesnt change the sound one bit. Sliding the actual frequency bars up and down also doesnt work.
Also there doesnt seem to be a way to only use these apps when using bluetooth or any headphones at all. This means it ****s with the sound of the speakers. Well, who uses his speakers, you probably say now. Yeah, but it also disfigures ring tones and notification sounds. :/
Still, to emphasize again sound is better over headphones using one of these, though I dont know how exactly this works if all the dials are without an effect.
This leads me to the conclusion that the firmware of the Mi 9 Lite has a bug with its soundchip, probably in the way it can accept inputs or parameters.
barth2 said:
This isn't good. Audio should be fine with good headphones without equalizer, unless your headphones require an amp. In any event, have you tried eqfy from the play store?
Click to expand...
Click to collapse
This is 2,99 bucks here. Is it free anywhere? Does someone own this one and can test it? Its advertized as using 10 bands - whatever this means....
ice_doritos said:
No problems over here tho. I upgraded from a Redmi Note 4x as well
Click to expand...
Click to collapse
Well please dont say there is no problem. Try to actually use the EQ and tell me that changing the bass or surround levels does something noticable.
Navalny said:
Have same problems. Is problem in miui?
Click to expand...
Click to collapse
I had the exact same MIUI version on my redmi4 and it worked there. The only difference is the redmi had android7 and the mi 9 lite uses android 8. But I cant imagine the android version being at fault here, because then it would effect way more different phones?
AgathoN667 said:
This is 2,99 bucks here. Is it free anywhere? Does someone own this one and can test it? Its advertized as using 10 bands - whatever this means....
Click to expand...
Click to collapse
Eqfy works for me but I'm on Android One with mi a3. Bass boost and surround and equalizer work. It has ten bands versus five bands that most equalizer apps have. It can automatically switch to a preset when you connect blue tooth or wired or disconnect. I listen to podcasts on speaker so I use it there too.
The downside is the UI is complicated and confusing and there are lots of settings in preferences and it takes a while to figure out. Because of the ten bands you pretty much have to use landscape and it's a full screen app so switching to it and switching back to another app is awkward.
You can try it and if it doesn't work get an easy refund right away within 2 hours. Beyond 2 hours you have to contact Google store and request a refund within 48 hours. Good luck
barth2 said:
I'm thinking of buying this phone and audio quality is important to me. Could you tell us which wired and wireless headphones have you tried?
---------- Post added at 11:44 AM ---------- Previous post was at 11:40 AM ----------
This isn't good. Audio should be fine with good headphones without equalizer, unless your headphones require an amp. In any event, have you tried eqfy from the play store?
Click to expand...
Click to collapse
I tried JBL T110 and JBl Under Armour BT.
barth2 said:
Eqfy works for me but I'm on Android One with mi a3. Bass boost and surround and equalizer work. It has ten bands versus five bands that most equalizer apps have.
You can try it and if it doesn't work get an easy refund right away within 2 hours. Beyond 2 hours you have to contact Google store and request a refund within 48 hours. Good luck
Click to expand...
Click to collapse
I was about to try that but then read by chance that the player Poweramp also has an integrated 10 band eq. I tried that one, it seems to work fully and do what I actually want from an integrated eq. Endless options and changing levels and turning dials does something. It even has a button linking to the android build-in eq menu and activating that one there / changing stuff suddenly works as well. Has me kind of puzzled? Maybe they changed the way in Android 8 how apps have to access the build in EQ and most player apps are not configured properly yet to use it fully?
Downside to Poweramp is that it says limited trial and the full app costs 4,99€ - I guess I will just spent that cash and be done with this problem once it locks me out.
AgathoN667 said:
I was about to try that but then read by chance that the player Poweramp also has an integrated 10 band eq. I tried that one, it seems to work fully and do what I actually want from an integrated eq. Endless options and changing levels and turning dials does something. It even has a button linking to the android build-in eq menu and activating that one there / changing stuff suddenly works as well. Has me kind of puzzled? Maybe they changed the way in Android 8 how apps have to access the build in EQ and most player apps are not configured properly yet to use it fully?
Downside to Poweramp is that it says limited trial and the full app costs 4,99€ - I guess I will just spent that cash and be done with this problem once it locks me out.
Click to expand...
Click to collapse
That's good to know. With a working eq is the quality acceptable now? Comparable to your other devices? Have you tried on wired headphones?
Advantage of eqfy is it works with other apps -- Spotify, Google music, YouTube, etc. It's up to you.

Categories

Resources