Database Develop

2i and BT problems

Ok, I have now run out of ideas so am looking for some advice/help. I had TT3 and a Jabra BT250 working quite happily together. Then I had to reload the TT3, now it will not pair with Jabra headset (it see's it, but will not pair), I have ugraded to the lattest rom, and have even tried a new XDA2i (sent other one back as faulty!!), still same fault. Has anyone else had this problem or have I just got a corrupt copy of TT3??

Just received this email - so new ROM has problems!!!!
Thank you for your email,
As regards our contact number, this 0906 number is no longer in use, and we are awaiting this to be removed from the website, apologies for this.
As regards your headset and the new ROM, we are currently aware that the new ROM has some Bluetooth issues, whereby some headsets were working on the previous ROM but not working very well with the new ROM of 1.11.169. We are currently working on getting this ROM upgrade removed and replaced by the 1.11.162 ROM which works fine. We apologise for the delay this is taking, and as regards changing your device to the lower ROM, until we get our website updated, you should be able to find this earlier ROM on websites such as XDA-Developer Forum or the like.
Finally, yesterday we had some major email problems, whereby some emails were not going through to the company, this has now been rectified as of this morning, hence you did not get an immediate response, this matter was outside of our control. We do try to respond to emails within our usual 24 hour SLA.
Regards,
Paul
O2 Customer Technical Support UK
Click to expand...
Click to collapse

Fring: Will not launch on my Wing. seems to be common problem. Any fixes?

Hello,
I downloaded Fring off of their site, installed the file. Its on my 'desktop' now with an icon and says 'fring is currently offline'...
When I click it, i get a progress icon and then nothing. When I find it in Programs and open it, i get the same thing. I never get any login windows or anything. I am always successfully connected to wifi when I do this.
Is there something I am missing? Do I need to change any memory settings or anything? I am pretty much running my Wing with 'out of the box' settings.
Any thoughts or suggestions greatly appreciated.
chris

I just installed it and ran it with no proble ............. try going to fring.com on your device and download the .cab file from there and re-install it

tried that twice now... seems after the install, it starts up fring and i get the FRING IS LOADING screen but it goes no further. Is this app a memory hog or something? Or is it just buggy?

Similar complaints on the Fring forums
http://www.fring.com/forums/showthread.php?t=3145
Last post is from someone who has your same issue on the Wing. I've got a Hermes (TyTN) and it doesn't start on that device either (splash screen pops, then program dies with no error messages, etc.)
Sounds like fring has known about this for awhile but no progress so far Fring support referred me to their blog, but nothing of use their, nor in the forums from what I've found so far:
Thank you for contacting our support team.
We are aware of the issue and working to solve it in the near future.
Make sure to check our blog for version updates http://www.fring.com/blog
Please feel free to contact us again should you have any further queries.
Click to expand...
Click to collapse

Not that this helps you much, but Fring worked great first time on my Wing. But then it stopped connecting shortly thereafter, just like you described. But then I uninstalled/reinstalled Fring and it has been working since.

SOLVED
I just solved that problem.
The problem was the program VoipAudiosrv, an error with that program. Just uninstall fring AND voipaudiosrv, restart your phone, and reinstall fring. You will be asked to re install voip audio srv: do it. Now it should work.

Fring - How did you install it?

Hi,
I am having trouble installing Fring on the latest Dutty Rom. Has anybody else experienced this problem?
I install the cab to either memory or storage and it still does the same thing... It just loads the splash screen up and hangs there?
I contacted fring about this problem and they replied with the following:
"Hello Colin,
Thank you for contacting our support team.
We are aware of the issue and working to solve it in the near future.
Make sure to check our blog for version updates http://www.fring.com/blog
Please feel free to contact us again should you have any further queries.
Thank you,
Neta
fring Support "
I see alot of people on this forum using Fring and I was just wondering how they went around installing it?
Thanks,
Colin Jensen

Worked fine for me on Dutty's V3 - I installed it and ran it with wi-fi turned off and was surprised that it automatically turned wi-fi on to connect.

Same here
Yeah, I got the same problem on my phone. I have had Fring on my before but it was acting buggy so I uninstalled it and looked for the newer version of it and tried installing it but I install it and like you said the splash screen comes up and just hangs.
Did you ever get it to work? I see that this is an old thread.
cjensen25 said:
Hi,
I am having trouble installing Fring on the latest Dutty Rom. Has anybody else experienced this problem?
I install the cab to either memory or storage and it still does the same thing... It just loads the splash screen up and hangs there?
I contacted fring about this problem and they replied with the following:
"Hello Colin,
Thank you for contacting our support team.
We are aware of the issue and working to solve it in the near future.
Make sure to check our blog for version updates http://www.fring.com/blog
Please feel free to contact us again should you have any further queries.
Thank you,
Neta
fring Support "
I see alot of people on this forum using Fring and I was just wondering how they went around installing it?
Thanks,
Colin Jensen
Click to expand...
Click to collapse

I had the same problem on my phone when I installed for a brief period of time last week. I ended up uninstalling......

i have installed the cab on a number of ROMS, never had any issue..

official tilt 6.0 rom didn't work, q mobile 1.2 rom didn't work...official tilt 6.1 rom, @ least it actually opens now (no more error screen) but doesn't get past loading. 3 roms, still haven't been able to get it working over here.

yep, confirmed, same problem, multiple roms, multiple ways of installing, multiple connections when opening program, Fring is still just stuck on the splash screen that says "Fring is loading" I had it working at one point in my Kaiser's life but nothing now seems to revive it, been trying for months, there are no fixes that I have seen online. Any good alternatives?

No problem so far.....
been using it for over 1month now....
installing and uninstalling for more than 8times
i justgot my kaiser....thats why with all thecustomization....
am using a russian Wm6.1 rom

I have the same issue
I tried every known fix that can be googled... I also contacted Fring... no help. It seems to be a huge problem with the 6.1 Roms. Someone here should have a fix...

Nope, it's fring's job to get it right, not much we can do... and they unfortunately dont seem to care much about WM6.1 users given the number of reports they've had for weeks/months about the problem and their everlasting "we're gonna investigate it" answer.

akadragon said:
I tried every known fix that can be googled... I also contacted Fring... no help. It seems to be a huge problem with the 6.1 Roms. Someone here should have a fix...
Click to expand...
Click to collapse
I have just installed Fring today on PDACornerUltimate ROM v15, it works properly.
I was able to make a SIP call to Fringe Testcall as well as SkypeOut call.

akadragon said:
I tried every known fix that can be googled... I also contacted Fring... no help. It seems to be a huge problem with the 6.1 Roms. Someone here should have a fix...
Click to expand...
Click to collapse
Yep, they just released a new version that works.

Language settings
I've the same problem with Fring that I've with google map.
My PPC regional settings are set to China, since it's the olny way to display chinese caracters everywhere in the OS (notice the OS is in English).
But, fring's language (like google map) is choosen according to those settings... it's very annoying.
Does anybody if there is a way to disable this feature (registry hack...) ?
Thanks,

Fring on kaiser
i just installed fring on my kaiser im using duttys_wm6.1 hybrid v2 and dont have a problem with it. it loaded up properly and everything seems to be working. my only thought is maybe a high amount of cpu usage, (programs that are running from start-up?) that is slowing everything down and causing the app to hang of freeze. thats just my thought. im probably wrong. anytime i have an issue with any kind of app freezing of not starting up thats usually were i look first. i hope that this helps. if not im sorry and at least i tried.
John

Problems with Skype.

Hi everyone I'm new with WM, before I had only Symbian. I have ATT Tilt which I've unlocked and updated to Kaiser firmware, with help of this forum. Before Skype worked perfect for me, I had WM6 pro, but now when I've upgraded to WM6.1 it wont work, during loading message appears: Failed to load file. I've tried to reinstall it for few times... no help. Maybe somebody knows any solution for that problem. Thanks.

odessit said:
Hi everyone I'm new with WM, before I had only Symbian. I have ATT Tilt which I've unlocked and updated to Kaiser firmware, with help of this forum. Before Skype worked perfect for me, I had WM6 pro, but now when I've upgraded to WM6.1 it wont work, during loading message appears: Failed to load file. I've tried to reinstall it for few times... no help. Maybe somebody knows any solution for that problem. Thanks.
Click to expand...
Click to collapse
Seriously, does ANYONE read anything around here before they jump into a new ROM? Would you jump into a pool BEFORE looking to see if any water was in it? How many threads have people already posted and said "NOT ALL APPLICATIONS ARE WORKING ON 6.1" Start reading, read some more, THEN post a relevant question.

odessit said:
Maybe somebody knows any solution for that problem. Thanks.
Click to expand...
Click to collapse
Downgrade back to WM6? Though I think I read somewhere that once you upgrade, you can't go back. There was a thread where people were finding problems with their phones after they went back to 6 that going back to 6.1 again didn't solve.
I remember when Vista first came out and the reports of programs failing left, right and centre. That's one of the main reasons I'm not bothering to upgrade until the compatability issues are resolved...

Is there any alternative program, that is also works with Skype network? I know Fring, but it's not so good. Maybe there are others?

Weird Kaiser Bahavior mostly after Standby

Hi,
I have a Kaiser with the following Items:
ROM: 3.31.111.4 GER (downloaded from german T-Mobile Site)
Rom Date: 09/01/08
Radio: 1.59.42.15 (from here, more about it further down)
Protocolle Version: 25.83.30.07H
Here the Problem:
I used to have a Custom ROM on this Kaiser (see my previouse Posts) but since i had some Issues about GPS and so on i decided to go back to the original T-Mobile ROM and downloaded it from theyre german Website.
Everything seemed to be working nice till i noticed that i didnt get as many Calls as i used to.
I went to check my Amount i had left on my Prepaid Card by hitting *101# and send but all i always got was a Message saying *Session ended*, instead of my Amount on my Account.
So i tryed to make a Phonecall with my Kaiser but all i heard was like a Pianolike multitone Chirp in the Speaker.
So i deleted all the Programs i have added, like TOMTOM6, and some Games and i rebooted the Kaiser to find out i could make Calls again.
Shortly thereafter i noticed that this would happen every Time my Kaiser was in Suspend Mode/ Standby so i deactivaed this.
Today i noticed that it happened again even i still had Suspend disabled.
I have already called HTC here in Germany today and all the LAdy told me to try to flash the T-Mobile ROM again and see if it still does the same as it does now, and if so to go to a T-Mobile Shop.
I have looked on this great Site but since i have PC Issues at this Time as well as PPC Issues i cant read through the entire Kaiser Section, I am sorry.
I have already tryed multiple Radios from the BIG RADIO Thread, but no changes.
Does anyone know of any FIX of this, does anyone else have this Issue too?
I would be very Helpfull for any Solution because i really dont want to have them send it in, since i dont know which Radio was on it Stock, nor do i wanna be w ithout it for weeks if i can fix it somehow, even i would much rather have a Diamond in exchange for it (yeah i know i am a dreamer LOL)
Thanks in Advance for any Suggestions, Help or Solutions.