Database Develop

Upgrading from Qtek 2.18 Rom to T-Mobile 2.21 Rom

Got a little question for you guys,
Right now I have a Qtek 2.18 Rom installed (which I like very much), but wanna do a hard-reset and was thinking about an upgrade to a newer Dutch Rom.
The only newer Dutch Rom is the T-Mobile 2.21 Rom, but I DO NOT like all the T-Mobile customisations.
So my question is, if I install the T-Mobile Rom and then cut it off right before the customisation tools, will it be a clean Rom then, almost the same if that I would cut of the Qtek 2.18 Rom just before customisation tools will be installed? Or do I still have a lot of T-Mobile junk installed?
If it will be a clean WM5, I will install some of the Qtek and some of the T-Mobile Extended_Rom CABS to get a "normal" WM5 again (with MMS folder, ClearVue PDF and stuff like that).
I ask this question because as far as I know I CAN NOT downgrade to the Qtek 2.18 Rom again once I upgraded it to the T-Mobile 2.21 Rom (am I right?) so I cannot test it out for fun
Regards,
Molski

Upgrading from Qtek 2.18 to T-Mobile 2.21 Rom (no problem!!)
Right now I am at work and got very bored, so I started to do some things for myself....like upgrading my Rom
Although I didn't got an answer to my questions, I took the shot and upgraded to a Dutch T-Mobile 2.21 Rom (with the chance that if I didn't like the T-Mobile Rom full of crap, I couldn't go back to my Dutch Qtek 2.18 Rom!).
So before my lunchbreak I upgraded it to the 2.21 Rom, tested it out for about 2 hours and came to the conclusion that it just sucked. I really don't like ANY carrierlogo's, skins, green batterymeter in the taskbar and other stuff of T-Mobile (cause I hate pink on my phone, it's not a gay or girls phone!).
So I tried to downgrade it and guess what, right NOW (while I am typing) my Rom is downgrading from T-Mobile 2.21 to Qtek 2.18 again without ANY problems!
This are the steps I have done with my Wizard (from the moment I got it):
- CID Unlocked my T-Mobile 1.08 Stock Rom
- Upgraded to this Qtek 2.18 Rom: RUU_Prodigy_2180706_21807106_20710_QTEK_Generic_DUT_Ship_2
- Upgraded again to this T-Mobile 2.21 Rom: RUU_Prodigy_2210205_22102108_021911_TMO_NL_DUT_Ship
- Downgraded my 2.21 Rom to my (good old) Qtek 2.18 Rom: RUU_Prodigy_2180706_21807106_20710_QTEK_Generic_DUT_Ship_2
So I don't understand why it's possible for me to downgrade/upgrade to whatever Rom I want and that other people have so many problems with this issue.
When Qtek releases a new Dutch Rom (hopefully an AKU2.3 Rom) I will upgrade my Wizard and will see if I can still downgrade it again.
Regards,
Molski

How did you make super CID? What tools did you use for it? I have Qtek 9100, ROM version of this device is 2.17.7.2 WWE.
IPL 2.17.001
SPL 2.17.001
GSM 02.07.10
OS 2.17.7.2
I did the following operations to make the device SUPER CID:
I synchronized the devece with Active Sync 4.1 .
I started aWizard 1.3 beta 1.
I checked options u and e with aWizard 1.3 beta 1.
Then I started Lokiwiz02b and checked option C.
But it did not help.
After that I tried application unlock for SDA, and then started option C with Lokiwiz02b, but it didn't help.
How can I make the device SUPER CID?

When my Wizard got delivered by the mailman, the very first thing I did was CID unlock with LokiWiz 2.0b (the stock rom was a T-Mobile 1.08 Rom), after that I did an upgrade to the Qtek 2.18 Rom, today I did the upgrade to the T-Mobile 2.21 Rom and also today I downgraded it again to the 2.18 Rom.
Nothing more, nothing less
But I wanna know one thing for sure: By the upgrading and downgrading I did I can be sure my Wizard is Super CID unlocked or not (maybe Summiter, Machinagod, Faria or someone else can answer this for me)?
Or do I have to do some more testing to make sure? Right now, I am willing to try any Rom...as long it is in Dutch and not WWE, I would freak out if I upgrade it again to the WWE Mr. Clean Rom or something and then notice that I can't downgrade anymore
Another question:
Is there maybe someone that knows when Qtek is gonna release a new Rom?
I noticed a positive difference in the performance between the 2.18 and 2.21 Rom, but just like I said, I hate T-Mobile Roms, because they have a bunch of crap in them (like carrierlogo's and stuff like that)? And there are no Clean Custom Roms in Dutch language, so I have to stick with the Qtek Roms for now!
Regards,
Molski

What makes a AKU2 ROM different? And a couple other ?s

Hello,
I just recently picked myself up a T-Mobile MDA and am now feeling comfortable enough to flash my first ROM. I have read, searched, and printed may of topics on this site and a few others but I have a few questions I was hoping you guys could help me with.
First, What makes a AKU2 ROM different from a non-AKU2 ROM? And for that matter what makes the AKU3.2 ROM different?
Also, When it is said "this ROM is for SPL/IPL 2.xx G3 phones only" does this mean that it is for any SPL/IPL that does not have the trailing .0001 (thus making it a G4 phone) and it would work with a 1.xx G3 phone? Is there a change log somewhere?
Finally, once a phone is CID unlocked I gather that it is for the most part permanent? In other words if I were to upgrade to say a newer AKU2 ROM would that then forbid me from downgrading back to my original 1.8.10.2 WWE ROM? I have read that posts indicating that you would be able to downgrade to 1.03 and then upgrade, I just want to confirm that I am understanding this correctly.
I currently have some pretty old ROMs on this stock MDA:
IPL: 1.08
SPL: 1.08
RADIO: 01.09.10
ROM: 1.8.10.2 WWE
I am really excited to upgrade the ROM on this thing if for no other reason than to upgrade the Radio ROM! ROM 2.47 not withstanding, Radio ROM 2.25/6 included in most of the custom ROMs must be a huge improvement over 1.9.10.
Thanks for any help you can provide.
Tom

First, What makes a AKU2 ROM different from a non-AKU2 ROM? And for that matter what makes the AKU3.2 ROM different?
Click to expand...
Click to collapse
AKU2 roms are push email enabled they also have stereo bluetooth support, now AKU3.2 roms have improved bluetooth drivers and lots of "other" improvements
Also, When it is said "this ROM is for SPL/IPL 2.xx G3 phones only" does this mean that it is for any SPL/IPL that does not have the trailing .0001 (thus making it a G4 phone) and it would work with a 1.xx G3 phone? Is there a change log somewhere?
Click to expand...
Click to collapse
Yes that is correct
Finally, once a phone is CID unlocked I gather that it is for the most part permanent? In other words if I were to upgrade to say a newer AKU2 ROM would that then forbid me from downgrading back to my original 1.8.10.2 WWE ROM? I have read that posts indicating that you would be able to downgrade to 1.03 and then upgrade, I just want to confirm that I am understanding this correctly.
Click to expand...
Click to collapse
Once again correct, its a "once in its lifetime" event

ratcom said:
AKU2 roms are push email enabled they also have stereo bluetooth support, now AKU3.2 roms have improved bluetooth drivers and lots of "other" improvements
Click to expand...
Click to collapse
I have AKU2.6 and have push email but no bluetooth stereo.
Started a thread in Hacking and Development asking for help/why. No luck yet. I've tried every hack I could find.
So from what you are saying the support is in the AKU 2.6 ROM ,
but Samsung, Sprint or some other "confounded wingnut" decided not to take advantage of or /implement it !?!
BOY, DO I HOPE THEY RELEASE AN UPDATE!

Ratcom,
Thanks for the quick reply bro! Very helpful stuff.
A though of another question if you don't mind....
What the does SPL/IPL stand for and what do they each do? I know that they are bootloaders but why the need for two? Is one for the PDA ROM and one for the radio ROM? Kinda meaningless question but I was just curious. Thanks again.

How to upgrade C800 IPL/SPL 1.09 Radio 2.69 to wm6??

Hi anyone knows how to upgrade Dopod C800 Singapore set with IPL/SPL 1.09 and radio 2.69 to the cooked ROMs successfully yet? How can i upgrade to the latest SPL/IPL and radio?? Dopod dont have any wm6 rom with latest radio available. I had read the forum but realised most of the roms advised not to upgrade with ipl/spl less than 4.000 as it will brick the device and unrecoverable. I realise the C800 SG set has no official wm6 RUU rom yet, is it true as i cant find any?? Only the HTC ver is available in wiki which cant flash on the c800 as it prompt device vendor error.

PLEASE DONT CROSS POST EVERY FORUM
RULES: Please read this before posting

ops sorry tot i might get more help

What a differences between official rom (G3 or G4)

Hi
I have qtek 9100 G3 stuck on first screen with ipl/spl 2.17 – cid lock I want to update with official I- mate k-jam rom but on the i-mate ftp site I found many rom for k-jam
Witch one of them may work with my G3 device?
What made a different between G3 and G4 on the official rom?
Can I use all official rom on any device ?
Thanks

If they are "official" ROMs, and unless they specify G3 or G4, they should work with either. The *.nbf file for official ROMs contains both G3 and G4 SPLs.

Download official k-jam wwe rom K-JAM_WWE_216901_2169101_020710_ship.zip from this site :-
ftp://ftp.clubimate.com/

IPL/SPL 3.08 for a G4 Wizard?

Does anyone have the IPL/SPL 3.08 for a G4 Wizard?

Isn't for the G3 only?
mebigdave said:
Does anyone have the IPL/SPL 3.08 for a G4 Wizard?
Click to expand...
Click to collapse

What is
Sorry if this is a dumb question (and I've read the Wiki a zillion times), but what does IPL/SPL mean and upgrading it would change what and how?
Thanks.

I read a post a while back about some one who modded it to run on a G4. It's basically the bios and the new IPL/SPL's help make the Wizard run quicker and have better battery life.