Hi All,
I need found keys addresses of front numeric keyboard, joystick and softkeys.
please help.
I found some values when I was fooling around with the hotkeys function of SmartToolkit.
So you could try that too.
I will make iGO8 mod for Smartphones and i need addresses like this :
x25=Joystick Left
x27=Joystick Right
x26=Joystick Up
x28=Joystick Down
x0D=Joystick fire
but for Smartphones like Vox, Libra, Rose...
HEEEELP :'(
I found these values in SmartToolkit Hotkey Menu.
I don't know if it realy means something, but here they are......
Joystick Left = 37
Up = 38
Right = 39
Down = 40
Center = 13
Home = 91
End = 115
Volume Up = 117
Down = 118
Camera = 233
CommManager = 233
0 = 48
1 = 49
2 = 50
3 = 51
4 = 52
5 = 53
6 = 54
7 = 55
8 = 56
9 = 57
ok ... i test it
thx
Related
can someone out there create a scrollwheel app that makes it work for all apps, not just in a couple of apps?
great idea...
nice idea
What do you want to do with scroll wheel?
If you want to scroll the active app you can use your finger.
If you want to zoom in or out that's quite application specific which is not an easy task to do. (Config scrollwheel app for each application differently, maybe.)
Anyway the second one should be a good feature to use.
see & add reg HKLM/Software/HTC/SmartTouch/
you can use scrollwheel to any apps like jog.
Could you maybe give a more precise howto?
Yeah help us out here, I would like to know it too!? This would be great! Step by step for the noobies please!?
tkhs said:
see & add reg HKLM/Software/HTC/SmartTouch/
you can use scrollwheel to any apps like jog.
Click to expand...
Click to collapse
The registry there reads:
Code:
[HKEY_LOCAL_MACHINE\Software\HTC\SmartTouch]
"Version"="1.00.31096"
"Threshold"=dword:00000008
"FirstThreshold"=dword:00000008
What should be added? I must say I'm a bit skeptic about this...
for example of RescoExplorer
Create key and value, as below
HKLM/Software/HTC/SmartTouch/RescoExplorer
(String Value) ClassName = RESCO_EXPLORER_CLASS
(DWORD Value) Mode = 4
(DWORD Value) WheelCount = 2
reset
you may use scrollwheel at RescoExplorer like jog.
if use other apps, you must know app's class.
RescoPhotoViwer's class = RESCO_PICVIEW_CLASS
InternetExplorer's class = IExplore
File Explorer 's class = FEXPLORE
CorePlayer's class = wCorePlayer
etc...
Dword Value "WheelCount"
1 = Movement of one every 36 degrees
5 = Movement of one every 180 degrees
10 = Movement of one every 360 degrees
Probably, you cannot delete created keys.
To delete it, stop SmartTouch Service.
HKLM/Services/SmartTouch
but...It doesn't seem to be so convenient...
tkhs said:
for example of RescoExplorer
Create key and value, as below
HKLM/Software/HTC/SmartTouch/RescoExplorer
(String Value) ClassName = RESCO_EXPLORER_CLASS
(DWORD Value) Mode = 4
(DWORD Value) WheelCount = 2
reset
you may use scrollwheel at RescoExplorer like jog.
if use other apps, you must know app's class.
RescoPhotoViwer's class = RESCO_PICVIEW_CLASS
InternetExplorer's class = IExplore
File Explorer 's class = FEXPLORE
CorePlayer's class = wCorePlayer
etc...
Dword Value "WheelCount"
1 = Movement of one every 36 degrees
5 = Movement of one every 180 degrees
10 = Movement of one every 360 degrees
Probably, you cannot delete created keys.
To delete it, stop SmartTouch Service.
HKLM/Services/SmartTouch
but...It doesn't seem to be so convenient...
Click to expand...
Click to collapse
someone try this and tell us if this works
Yep, it works. I just tried the exemple he wrote. But it's a lot of work if you have to do all of your applications this way!?
could someone write a cab to activate overall scrolling like the cruise?
yes pls! the wheel is useless!
tkhs said:
for example of RescoExplorer
Create key and value, as below
HKLM/Software/HTC/SmartTouch/RescoExplorer
(String Value) ClassName = RESCO_EXPLORER_CLASS
(DWORD Value) Mode = 4
(DWORD Value) WheelCount = 2
reset
you may use scrollwheel at RescoExplorer like jog.
if use other apps, you must know app's class.
RescoPhotoViwer's class = RESCO_PICVIEW_CLASS
InternetExplorer's class = IExplore
File Explorer 's class = FEXPLORE
CorePlayer's class = wCorePlayer
etc...
Dword Value "WheelCount"
1 = Movement of one every 36 degrees
5 = Movement of one every 180 degrees
10 = Movement of one every 360 degrees
Probably, you cannot delete created keys.
To delete it, stop SmartTouch Service.
HKLM/Services/SmartTouch
but...It doesn't seem to be so convenient...
Click to expand...
Click to collapse
just tried on Resco Explorer and works
thanks
crino said:
just tried on Resco Explorer and works
thanks
Click to expand...
Click to collapse
PIE also work!
Resco Photo Viewer is NOT working
What is the class name for estmertec jbed/operamini?
regards and thank you!!
How can I know the applications classes names?
Would be possible enable it for TF3D?
Thanks
tkhs said:
for example of RescoExplorer
Create key and value, as below
HKLM/Software/HTC/SmartTouch/RescoExplorer
(String Value) ClassName = RESCO_EXPLORER_CLASS
(DWORD Value) Mode = 4
(DWORD Value) WheelCount = 2
Click to expand...
Click to collapse
This screams for a small config app to be written so we can make different settings for all our apps. SK team??
also for the call histry & contects list...
Hi there,
since i got my Kaiser i always had a problem with the low BT Volume. I tried many fixes from here but noone works for 100%.
The only lud roms were the PDA Corner ones.
So i made my own
Install the attached cab and restart your device. Then sound will be fine and loud.
If you use SRS Wow it won't work after installation, cause i had to change the drivers in registry.
@MODS: CAN WE MOVE THIS TO DEV/HACKING SECTION? CAUSE I THINK THIS COULD WORK FOR ALL DEVICES!!!
what exactly does this do (on your phone, what does it change, or is it a program always running?) and if it makes things worse is it uninstallable ? (since I see it's a cab).
Mr. Kayne said:
what exactly does this do (on your phone, what does it change, or is it a program always running?) and if it makes things worse is it uninstallable ? (since I see it's a cab).
Click to expand...
Click to collapse
The .cab file just contains registry settings and the file 'AudioPara3.csv'. As far as I can tell the 'AudioPara3.csv' is identical to the one already in my ROM (stock-ish 5.2.19212), however there are quite a few new registry entries that I can't see in my ROM
Code:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\A2DP\Settings]
"SampleRate" = 48000
"BitPool" = 0
"UseJointStereo" = 0
[HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\AudioGateway]
"PowerSave" = 1
"ConnectHFOnCall" = 1
"Capability" = 101
"BTAGExtModule" = OEMAGW.dll
"SupportCLI" = 0
"BTAGPBModule" = \Windows\BthAGPhonebook.dll
"NoRoleSwitch" = 1
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\BtA2dpSnd]
"GainADC_LoudSpkMIC_12h" = 60
"OldDriver" =
"Dll" = bta2dp.dll
"SPKVol_NotPhoneCall_02h_06h" = 0
"SPKVol_PhoneCall_02h_06h" = 3
"HPVol_PhoneCall_04h" = 4
"GainADC_BluetoothMIC_12h" = 33
"GainADC_HeadsetMIC_12h" = 42
"GainADC_ReceiverMIC_12h" = 55
"3DEff" = 0
"MicGain" = 39
"AGC" = 0
"Treble" = 0
"Bass" = 0
"IClass" = {A32942B7-920C-486b-B0E6-92A702A99B35}
"Sysintr" = 25
"Flags" = 65538
"Index" = 8
"Order" = 8
"Prefix" = WAV
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev]
"OldDriver" =
"Dll" = Wavedev.dll
"Flags" = 0
"IClass" = {A32942B7-920C-486b-B0E6-92A702A99B35}
"DACVol_0Ch" = 7
"SPKVol_NotPhoneCall_02h_06h" = 0
"SPKVol_PhoneCall_02h_06h" = 3
"HPVol_PhoneCall_04h" = 4
"GainADC_BluetoothMIC_12h" = 33
"GainADC_HeadsetMIC_12h" = 42
"GainADC_ReceiverMIC_12h" = 55
"3DEff" = 0
"MicGain" = 39
"AGC" = 0
"Treble" = 0
"Bass" = 0
"Sysintr" = 25
"Priority256" = 149
"Order" = 11
"Index" = 1
"Prefix" = WAV
Andy
The .cab file just contains registry settings and the file 'AudioPara3.csv'. As far as I can tell the 'AudioPara3.csv' is identical to the one already in my ROM (stock-ish 5.2.19212), however there are quite a few new registry entries that I can't see in my ROM
Code:
Click to expand...
Click to collapse
Yes thats right, the most of the cab are just reg keys, there is no app or similar that runs in background. The audiopara.csv is from an oldr att rom.
First i trie every fix around here on xda-developers, but no one of them worked properly. Then i mixed some of the together, and i noticed an improvement. Some days ago i got the csv file and replace it with the one in my actually rom and volume was very high. I checked this on several roms and for me it seems to work. Some of the reg keys don't do anything with the volume but they improve the sound quality over bluetooth.
Would be great if some of you could post their results.
Don't matter, i don't know if you can completly uninstall this, but there is no key or so that will make bt or so not work anymore.
Also it would be great if you could send my you audiopara.csv files and the reg keys of the rom you are usin (if it's loud), so i try to improve it more and more, or am i the only one with bad volume?
If anyone is using a pda corner rom at the moment, please send me the reg keys and the audiopara3.csv cause theese roms had the best sound quality and volume with bt.
well I tried it out and I guess my bluetooth is slightly louder. ( I checked it before and after)
No adverse effects.
Solace v1 (ROM version 3.29.707.0 WWE)
Radio 1.70.19.09
Windows Mobile 6.1 of course. Hope that helps in some way.
Thanks my brother,i'll test your cab.
Hi Jecky
Thanks for this !!!!!!
To be honest, can't differentiate a "absolutely louder" feeling.
Can you tell us how to modify / what / which part to modify by ourselves to alter the volume up or down? Thanks.
My BTHS is Omiz2099, when matched to ELF is loud as hell. But when match to Asus P552w GalaxyMini2 is soft as hell.
Hence this is much appreciated. eventhough not feeling significantly, but Thanks still.
Did u changed the parameters of the sound variables to their maximum values in that registry tweak ????
BT headset micro_speaker volume change
BT headset's micro_speaker volume hasn't increased, but MIC pickup has, after I changed everything to "100".
I notice there isn't any BT heatset micro_speaker's volume control.
i.e. I suspect need "BTVol_PhoneCall_??h_??h" = ??
but I don't know how many h or whatever to use behind.
Anyone can shead of light?
i truly do apologize if this has been posted elesewhere, but i simply could not find anything like it. heres a partial list of keycodes to use in the genesis plus config file, if you want to reconfigure the keys...
a 97
b 98
c 99
d 100
e 101
f 102
g 103
h 104
i 105
j 106
k 107
l 108
m 109
n 110
o 111
p 112
q 113
r 114
s 115
t 116
u 117
v 118
w 119
x 120
y 121
z 122
backspace 8
tab 9
space 32
period 46
up 273
down 274
right 275
left 276
the codes used for the control pad and the arrow keys are the same, but the control pad codes actually rotate if the screen is deployed/slid up, so that when the screen is closed so the keyboard is hidden, the codes are as follows:
up 273
down 274
right 275
left 276
but when the screen is slid out to reveal the keyboard, and you hold it with the keyboard facing you in the typing position, the codes actually change to:
up 276
down 275
right 273
left 274
if you changes these in the genpp config file, it will change the arrow keys as well.
there is a way to see what keys are being pressed, with itty bitty numbers showing up on the screen as the keys are pressed, but i am too blind to see them...
As I'd like to use my tablet as a "thin-client" i.e. desktop terminal to my server, I need keys like "return" to act as "escape" and "lock" as "delete" etc. So I changed the mappings in "/system/usr/keylayout/asuspec.kl".
In the case someone else would be interested in remapping their keyboard, I have compiled a list of scan-codes associated with each physical key.
This though with the exception of the "Fn" key, which I suspect function on a purely hardware based level to alter key scan-codes.
This list is based on a "nordic" layout (not sure if physical layout differs?), but I refer to each key as R#C#, row number and column number, starting from 0.
Code:
Scan Row/ Description Suggested mapping
Code Col
*********************** ROW: 0 ***********************
158 R0C0 Back ESCAPE WAKE
238 R0C1 Wireless F1
237 R0C2 Bluetooth F2
60 R0C3 Touchpad F3
224 R0C4 Brightness-down F4
225 R0C5 Brightness-up F5
61 R0C6 Brightness-auto F6
212 R0C7 Screenshot F7
150 R0C8 Browser F8
62 R0C9 Settings F9
165 R0C10 Media-previous F10
164 R0C11 Media-play/pause F11
163 R0C12 Media-next F12
113 R0C13 Mute INSERT
114 R0C14 Volume-down MOVE_HOME
115 R0C15 Volume-up MOVE_END
142 R0C16 Lock FORWARD_DEL WAKE
*********************** ROW: 1 ***********************
41 R1C0 ½§
2 R1C1 1
3 R1C2 2
4 R1C3 3
5 R1C4 4
6 R1C5 5
7 R1C6 6
8 R1C7 7
9 R1C8 8
10 R1C9 9
11 R1C10 0
12 R1C11 +
13 R1C12 ´
14 R1C13 Backspace
*********************** ROW: 2 ***********************
15 R2C0 Tab
16 R2C1 Q
17 R2C2 W
18 R2C3 E
19 R2C4 R
20 R2C5 T
21 R2C6 Y
22 R2C7 U
23 R2C8 I
24 R2C9 O
25 R2C10 P
26 R2C11 Å
27 R2C12 ¨
28 R2C13 Enter
*********************** ROW: 3 ***********************
58 R3C0 Caps-lock
30 R3C1 A
31 R3C2 S
32 R3C3 D
33 R3C4 F
34 R3C5 G
35 R3C6 H
36 R3C7 J
37 R3C8 K
38 R3C9 L
39 R3C10 Æ
40 R3C11 Ø
43 R3C12 '
28 R3C13 Enter
*********************** ROW: 4 ***********************
42 R4C0 Shift (left)
86 R4C1 <
44 R4C2 Z
45 R4C3 X
46 R4C4 C
47 R4C5 V
48 R4C6 B
49 R4C7 N
50 R4C8 M
51 R4C9 ,
52 R4C10 .
53 R4C11 -
54 R4C12 Shift (Right)
103 R4C13 Arrow (Up)
104 R4C13Fn Page up
? R4C14 Fn (Right)
*********************** ROW: 5 ***********************
29 R5C0 Ctrl (Left)
? R5C1 Fn (left)
172 R5C2 Home META_LEFT
217 R5C3 Search ALT_LEFT
57 R5C4 Space
100 R5C5 AltGr
139 R5C6 Menu
97 R5C7 Ctrl (Right)
105 R5C8 Arrow (Left)
102 R5C8Fn Home
108 R5C9 Arrow (Down)
109 R5C9Fn Page down
106 R5C10 Arrow (Right)
107 R5C10Fn End
Hope this is going to save someone some time
So I have been having some trouble getting exactly the experience I wanted.
Turns out that either the VNC client apps didn't support my nordic keyboard layout properly, or it did not support meta keys, or it did not support the altGr key.
I've been through 20+ clients testing this, until I finally decided to try out Jump Desktop, it is a paid app, but everything just works.
This post is written from my fedora20 KVM vm accessed through Jump Desktop VNC.
I can write æøå, @ with AltGr+2 etc. so far everything just works.
Slight latency compared to desktop VNC, but for coding/compiling and browsing it is no problem at all.
Now I just have to get my hands on a micro hdmi adapter so I can try an external monitor, but so far I am very pleased with my TF701T :good:
Solid substitute for my old laptop for my needs, AND I can just pop the screen off and I have a brilliant android tablet
One of the things that realy troubles me is that all the functionality of the first raw (wifi, bt etc) works without using the FN keys so you can mistakenly turn off the wifi or BT accidently while working or typing fast, happend to me quite a lot of times.
Is there a way to force these keys to be only working when the FN keys is being used? (something like the Shift key functionality)
Also, could you post please your ki file please?
Infinity ink ribbon gameshark code Claire
800D4A09 0063
* modify the last two digits for whatever you want *
60= MO DISK
50= FILM D
51 = base vaccine
53 = Special Key
54= blue power plug
55= red power plug
56 = cord
58 = cabin key
59 = 1st precinct key
42= bomb and det
43 crank
48 = Eagle metal
49= wolf metal
30= lock pick
32= valve handle
33= red jewel
35= blue card key
36 serpent stone
37 Jaguar stone
38 left half of blue stone
39 right half of blue stone
5E yellow control panel key
5A 2nd precinct Key
5B 3rd precinct Key
5C 4th precinct Key
5D red control panel key
5F power room key
4C main fuse
4E Sherry's vaccine
4F vaccine cartridge
3C Eagle stone
#Infinite Ink Ribbons Leon#
800D4A51 003E
Sent from my SM-T310 using XDA Premium 4 mobile app
Please use the off topic gaming thread for this type of discussion
http://forum.xda-developers.com/showthread.php?t=1279620
thread closed