Wifi - GPRS problem with cooked roms? - Touch HD Windows Mobile ROM Development

Hello, I have some trouble with some cooked rom based on 1.19, I tried panosha 1.1 and dutty 1.3. If I set a static ip for wifi connection and try to connect using this connection all works fine, but if I switch to gprs connection then I got error connection... the only way to restore gprs connection is to set dinamic ip in wifi
Anyone else got the same problem?
With roms based on 1.14 I have no problem
Sorry for my bad english

Shalafy said:
Hello, I have some trouble with some cooked rom based on 1.19, I tried panosha 1.1 and dutty 1.3. If I set a static ip for wifi connection and try to connect using this connection all works fine, but if I switch to gprs connection then I got error connection... the only way to restore gprs connection is to set dinamic ip in wifi
Anyone else got the same problem?
With roms based on 1.14 I have no problem
Sorry for my bad english
Click to expand...
Click to collapse
Have you find any solution?

Claus72 said:
Have you find any solution?
Click to expand...
Click to collapse
Unlucky nope, I have to set ip everytime I want to use wifi or gprs don't works

I have the same problem. I´m using sw Wifi profiles.http://blog.renestein.net/Vánoční+Dárek+Nový+Software+WiFi+Profily+Pro+Windows+Mobile.aspx (eng and cz version)
It is a bug in the firmware?
It is a problem only versions 1.19, 1.14 working properly.

Yes in 1.14 all works fine but all new roms are 1.19 based so ...

I have the same problem on 1.19.831.0 ROM

Thanks man
Ive been on this site while and i have to say dutty man thanks for the rom, brilliant work and everything i ever wanted thanks bro

Related

What todo next?

I took the shipping rom from the FTP, replaced the radio rom, and upgraded, then I ran the BT3900.cab on the phone..
So now I got:
Rom 1.22.00WWE
Radio 1.08.00
ExtRom 1.22.557 WWE
BT 1.0.0.3900
Anything else I can do? or MUST do?
What else can you recommend to install?
I got TomTom3 on it too..
I hope that the radio/bt upgrade is working better with my SonyEricsson HBH30 and the BT GPS..
Well the biggest bug is in the BT.
Im testing Radio 1.08.00 with BT .3900 and it is the best i've tried until now. You can get on the Wiki and start reading about what to do and not. Your current settings looks fine, asuming it's a Dangaard sold device.
The ROM numbers is not always better just because they are higher!!
Thanx bosjo..
the BT is working GREAT!!
I think the wifi is better to, I have better connection now.. hmm...

can't use wifi after rom upgrade to 1.40.06 CHT

andybody can help me ?
my o2 iis can't login any router after my rom upgrade to 1.40.06 cht. pls noted tt the rom is supply from seeo2 official website. & pls also noted tt, the wifi of my iis is seem still working but can't login & use any router. the symbol of wifi just show me keep search but can't login at the end.

LOGOUT Rom BA WM2005 5.0.06 AKU3.0

New Release... and must try !! This rom..
Rom Download :
http://micmeo.com/BlueAngel/AKU_3.0/BA_WM2005_Logout_5.0.06_AKU3.0.zip
Thanks Logout , Micmeo And All Developers!!
:twisted:
good job!
flash it now
Autorom is wrong?
I've just downloaded the ROM and tried to install it on my BA, but the autorun on the extended rom didn't do anything.
So, I've copied to the autorun.exe from Helmi's rom and it's loading the extended files now.
Up and Running now
After the little autorun problem was fixed, my BA is up & running.
At first look, I would say that it is a little bit faster then Helmi's 1.2 ROM.
The system quickly responds to taps on the screen (menu, buttons etc).
Wireless & Bluetooth are working (Bluetooth via the Comm.Manager and TrayIcon, Wireless only via the TrayIcon).
I had no problems installing some other software (iSilo, BeeLineGPS, AvantGo, SPB Weather, PocketLAN, mNotes) and they seems to be running fine.
Maybe Logout can share with us what is specific about this release and if there are any known problems.
It is 5.04.06 not 5.0.06.
You can see the version 5.04.06 in boot image(The green image of push technology) or in Device Information.
Please correct the name.
anyone know... why my mms always failed to send ....help!!!
some1 plz.. post shutupxp for wm5.0
@vivi can u send MMS on logout Rom ?
Thanks
:twisted:
Phreakazoidz said:
anyone know... why my mms always failed to send ....help!!!
@vivi can u send MMS on logout Rom ?
Thanks
:twisted:
Click to expand...
Click to collapse
It's a shame.I never use MMS.
Try configure MMS account but no success yet. :wink:
Phreakazoidz said:
New Release... and must try !! This rom..
Rom Download :
http://micmeo.com/BlueAngel/AKU_3.0/BA_WM2005_Logout_5.0.06_AKU3.0.zip
Thanks Logout , Micmeo And All Developers!!
:twisted:
Click to expand...
Click to collapse
Thanks, downloading right now.
ringing delay
if use mp3 as ringtone, it will be delay about 5-7seconds....but if use midi or wav then it take around 2 or 3 sencond......any solution for this??
thanx
Very fast rom !!!!
But :
If I turn on speakerphone the icon and notification stays on the screen even after the call is ended.
How can I remove this ??
Finnaly Logout ROM is out!!... been waitin for quite some times... congratulation logout.. :wink:
btw, I believe u strip the os part from my rom, cos some part ar not from bepe version, I recommend u remove some drivers that didn't not needed, this is my mistakes, and this is why I release the hotfix logout. that drivers is only usable with iDO device, for our device its only taken resource and no noticable function...
I'm happy with the rom release, so we can have an options, and maybe we can hv a good comparating in the way to find the ROM that we can use in the end, that my goal not popularity...lol...
once again... congratulation logout...
Phreakazoidz said:
anyone know... why my mms always failed to send ....help!!!
some1 plz.. post shutupxp for wm5.0
@vivi can u send MMS on logout Rom ?
Thanks
:twisted:
Click to expand...
Click to collapse
its seems this problem is ur main problem bro...what setting cab u use? if u use from wm2003 version, u just need to check the setting in Messaging >> MMS Configuration >>Servers>>Choosse ur operator >>and change the connect via dropdown list to ur operator MMS setting, reset maybe needed and then try to send again... btw also look at the preference tab there's a setting for Photo resolution.
@helmi....
i check mms configuration , i change port 3337 to 9201 ,send MMS again my MMS work perfectly !!!
SOLVED!!
Thanks helmi
:twisted:
anyone have a thoroughly tested speed analisys with everything turned on and synced a few times yet? How the speed compared to heli's latest?
Thanks Bebe, Helmi and all for new tesed Rom.
@Helmi: Yes, I replace some your file, module, registry were missing in original AKU3.0 Rom.
I thinks you should build your rom on new core (nk.nba with AKU3.0 Xip file) and some registry add in boot.hv better than default.hv. Boot.rgu on BA WM2005 is not necessary.
@ekapco: I try to add speaker phone in my rom, but It doesn't work, can't turn off it. Pls delete speaker phone in startup folder.
Now I'm very busy in my office, may be I can't edit bugs in my rom in longer time. I believe Helmi will release best rom WM2005 for BA.
logout said:
@ekapco: I try to add speaker phone in my rom, but It doesn't work, can't turn off it. Pls delete speaker phone in startup folder.
Now I'm very busy in my office, may be I can't edit bugs in my rom in longer time. I believe Helmi will release best rom WM2005 for BA.
Click to expand...
Click to collapse
@ Logout : It turns off okay, but just the Icon remains !
Small bug -> Yesterday missed some calls. Red light was flashing. I read the notifications, but red light won't turn off, until soft reset !
Another small bug -> Softkeys are not working like they should.
For example in commanager there should be an exit/done key ??
Wifi and Bluetooth work fine. Speed is very good
SIM Access Profile
Hello,
doeas anyone know if Bluetooth SIM Access Profile works with Logout's ROM?
I've read SAP work only with Bluetooth 2.0... doeas anyone know wich bluetoothversion the WM5-ROM's use?
What I found
Hoi Logout
The fastest rom I've ever tried.
I flashed it yesterday and found following issiues:
- Speed-Dial-Button in Phone missing
- The Networkcard-list is corrupt - blank lines between and configuration of them will mess up.
Also activesync-error 85002003, when trying passthrough Laptop to Internet and exchangeserver. This happens often like in Helmi's rom after wifi was used. Perhaps it's a timeout-prob or Issiues with the Comm-Mgr. Error never happens, when BA has been softresetted.
Thank you all for your great efforts to get WM5 working on BAs.
Chris from Zurich
Hopping rain will stop when streetparade is going on
Qtek9090
Helmi_c AKU 3.0 1.1b
there is a way to install Speed Dial?
I love this function
Can't we have a ROM overview like we usually do?

[Radio ROM]1.50.08.11

This Radio ROM is extracted from latest CHT9100 (Tawian ROM).
CHT9100 WM6 ROM Code Update (2007/07/10)
ROM Version: 3.00.751.10
ROM Date: 06/29/07
Radio ROM Version: 1.50.08.11
Extended ROM Version: 32.83.7020.20H
http://www.sendspace.com/file/f7xu46
and where is the radio rom see only Fotos
poussin69 said:
and where is the radio rom see only Fotos
Click to expand...
Click to collapse
Link add. Sorry
Another mirror and a snapshot.
http://rapidshare.com/files/51041962/CHT9100GSM.exe
View attachment 48030
So dta1974 you are using this radio version on your P3600 - what to report? GPS fix speed - battery drain - 3G and GSM reception - tell us all about it!
Infact, specified features will be appreciated
For sas90850
Hello,
Very thanks i ve just install it and all are good :
GPS : Quick Fix
For the 3G and GPRS data i will report later.
Private69.
@+++
Did someone some test with the operator Bouygues Telecom ? The previous ROM (1.46...) can't be used with this operator.
Installed now, I'm testing
The readme.txt says:
Modified RUU Updater by Olipro
This is a modified RUU Updater I have created; this will automatically push Des's SSPL to your phone although
if you have security enabled then you will need to answer "Yes" to the dialogue when it appears on your phone
There is no upgrade ROM included, but any .NBH file will work; although flashing a foreign NBH will work, it
is a far better idea to extract the contents with NBHextract and then rebuild it with NBHGen
Both NBHextract and NBHGen are called from the command prompt although eventually I will get round to coding a UI for them.
Please remember that the correct ExtROM address is 900 and not 700 for the Trinity (default, but don't mix with Hermes)!
NBHGen and NBHExtract can be found in their respective folders of this RAR file.
NB: I don't own a Trinity but this should work fine, of course, if it doesn't... your problem
private69 said:
Hello,
Very thanks i ve just install it and all are good :
GPS : Quick Fix
For the 3G and GPRS data i will report later.
Private69.
@+++
Click to expand...
Click to collapse
GPS fix is incredible...
too fast
Matteo66 said:
GPS fix is incredible...
too fast
Click to expand...
Click to collapse
I agree... TTF definately seems much faster than before. Still need to test further.
Thank you sas90850 for sharing.
Looks good
Yes, it works for me with Bepe ROM.
It works also with th enice Faman 3.3.
But i do not find it faster for the GPS than before but the test I did is not very good to make a comparaison.
Thank's to give us this radio.
I am running it with bepe's rom as well. It took ages to flash.
GPS: works fine.
Phone: I don't know as I need to put my sim card back in
Wifi: cannot connect anymore to my access point (WPA2-PSK). Tried downgrading to WPA-PSK: same problem. Checked MAC address, no change.
Anyone else has noticed the broken wifi?
Nope. Not even one problem here. Works great with Indigo_full. And GPS is faster, I'm sure about that.
Using CommManager, WiFi won't start... (using schen 10 buttons kaiser commManager 3G)
Using WiFi control from BatteryStatus, WiFi start without problem, and connection to my AP is quite immediate. Signal strenght seems to be increased, but max 10%...no more...
Regarding the GPS, seems equal to previous radio 1.46.30.11, don't see any difference.
BUT...
For the phone itself, I always had a signal strenght at 74% (batterystatus) when @home... With this new radio, I have 100%...
Will test BT tomorrow, I'm already naked, and don't want to go outside in underwear to test BT into my car
My experience: first GPS fix with this radio ROM is faster (~ 60 sec) then ROM 1.46.00.11 (~120 sec).
- much faster GPS fix
- no problem with WiFi here. I'm using also WPA2-PSK. Runs as before.
using bepe 0.75
Using WM6 FR FAMAN 3.3 with this new Radio
No problem at all : Wi-Fi ok, Bluetooth ok, GPRS/3G ok

HSDPA lost with WinMob 6.1

I upgraded my Vodafone-branded Kaiser to 6.1 using the Voda ROM - since when I;ve been unable to get an HSDPA signal, even though 3G and GPRS work fine. Have they broken or disabled it? Obviously, I've enabled HSDPA and restarted the device etc...
Can't find anyone else with this problem after a search so would appreciate a steer. Thanks.
Me too.
Upgrade from official WM6.0 ROM to official WM6.1 ROM, and now only 3G, no more HSDPA.
Regards!
Do you have HSDPA enabled on the new ROM? There is a setting in Kaiser Tweak and also the HSDPA option in Settings>Connections.
Failing that, try changing your radio. You will have changed radio between WM6 and WM6.1. Maybe another WM6.1 Radio will work.
Ta
Dave
As I said, I've enabled HSDPA via KaiserTweak and the in-built app (both of which seem to do the same thing) but nothing changes. The radio is set to Auto. What else can I tweak?
You might want to try flashing a new Radio.
You can find a collection in the Kaiser Radio link in my Sig.
EDIT:
More info on Radio's can be found here: http://forum.xda-developers.com/showthread.php?t=393182
Ta
Dave
Thanks.FWIW, mine has the official Vodafone ROM, radio version 1.65.16.25. Does anyoe know which radio works with HSDPA?
liteswap said:
Thanks.FWIW, mine has the official Vodafone ROM, radio version 1.65.16.25. Does anyoe know which radio works with HSDPA?
Click to expand...
Click to collapse
Probably depends on Location and Carrier, post both those and someone might be able to help. If not, just try a few, you can always revert back to your current Radio.
Dave
liteswap said:
Does anyoe know which radio works with HSDPA?
Click to expand...
Click to collapse
See my response to your post in the Ultimate Radio thread.
Many thanks for the info!

Categories

Resources