Database Develop

Charmer crashed with the new Aku 3.3!

Hello!
I tried to flash my Charmer with the new german Aku 3.3. At first everything seems to be ok, but at 95% it stops and i got the Message: update error- there is an comunication problem! So what can i do? I tried to flash the old rom back but there comes also at 95% a message: invalid command - nfb file cannot be used for your pda!
Please help me !
Greetings Musna!
Ps: can somebody upload a sd image for the mda compact II !

Go to bootloader mode, then try to flash RUU rom (1.x). You can find it on Charmer wiki.

It doesn`t work too, it always stops at 95% has anyone another idea?

did you try hard reset?

Yes i tried hard reset, but it is always in bootloader!

I have also the same problem. Tried to upgrade to version 3.3. Everytime it stops at 80%. I don't know why?! I can repair it with the software and re-run it. But it has the same effect.
Now i will try to downgrade to 2.6 again. I really don't understand what causes the problem. I hope i will get this thing running again....
EDIT: I reflashed the device with the older 2.6 ROM and it is working right now. However I didn't really get why it gets stuck at 80% with 3.3 ?!?!

nitrane said:
I have also the same problem. Tried to upgrade to version 3.3. Everytime it stops at 80%. I don't know why?! I can repair it with the software and re-run it. But it has the same effect.
Now i will try to downgrade to 2.6 again. I really don't understand what causes the problem. I hope i will get this thing running again....
EDIT: I reflashed the device with the older 2.6 ROM and it is working right now. However I didn't really get why it gets stuck at 80% with 3.3 ?!?!
Click to expand...
Click to collapse
The aku3.3 is up to date the bootloader version!!!
IPL and ISP version now is 3.00.
http://www.windowsceportal.hu/forum/viewtopic.php?t=1079

Sorry but i do not speak hungarian. What do you want to tell me ?

I´ve got the same: My charmer is in Bootloader IPL 2.06.0001 SPL 3.08.0001
I can´t downgrade to AKU 2: Please order a newer Version.
Every try to upgrade to AKU 3.3 failed at 95% with Error 326.
Is there any help for my charmer???

oh.**** !!!! I got the same problem with them and my first pda uk rom already empty screen and then i try with my scrond pda German rom it the same problem and now just only show in bootloader screen.Have i ask someone who knowage about this he told me that if SLP in you PDA have chang it be hard to repair.So,I think I lose 2 PDA did I try to flash in T-Mobile Official Rom de that i hope to develop it but i hve to kill 2 Charmer.Who take responsibilities,T-Mobile right ???

Ok no problem you can repair it! At first you have to brand your device with the rom you want to! After 95% the Problem will come again! When it stops you have to go with a reset to bootloader again.When your device is in bootloader you have to install the Radio Rom from this thread:
http://forum.xda-developers.com/showthread.php?t=302768
After that your device will be able to boot again and it should work!- But the Problem during the installation will stay,so you have always to use this way to flash your Mda compact II!
In the new rom there must be a problem with the radio rom and this causes the broken device.
I`m sorry for my bad english but i`m not used to talk very much! So i hope you understand what i mean!
Greetings from Austria Musna!

that link is broken

Then try this one:
ftp://xda:[email protected]/Prophet/Radio_Roms/Prophet_G4_RadioRom_v2.47.11.exe
You can find the radio rom also on the ftp server. Prophet> Radio Roms>Prophet_G4_RadioRom_v2.47.11.exe
You can try different Radio Rom versions, i have flashed the v.247.11 and it worked.
Normaly it should work!

Thank u so much !!! My Charmer secrond PDA come back have life again and it can working.So,my Charmer first PDA UK rom still empty screen and notthing working when i press any button.Who can slove this problem !!

Musna do you have any massage such as msn

My MDA Vario(Wizard) is almost dead!! Help please!

Hello,
Iám Spanish and I just bought a MDA VARIO in GErmany, so I tried to install the spanish rom "2.18.7.8" and i did it. Everything was ok during installation, but when I restarted... The device couldn´t restart. It allway stop on the Qtek screen(with the sky), sometime it change the screen into a white(HTC innovations) one for a second. But it doesn´t work.
I made soft and hard reset, but nothing changes.
I also tried to install an other rom by bootloader way, but the rom sais that is not possible to contact with the phone device.
I´m scared and I don´t know what to do.
Know this is the rom´s I have on my Qtek 9100 :
IPL 1.06
SPL 1.06
OS 2.18.7.8
Help please!!

Jmavatar said:
Hello,
Iám Spanish and I just bought a MDA VARIO in GErmany, so I tried to install the spanish rom "2.18.7.8" and i did it. Everything was ok during installation, but when I restarted... The device couldn´t restart. It allway stop on the Qtek screen(with the sky), sometime it change the screen into a white(HTC innovations) one for a second. But it doesn´t work.
I made soft and hard reset, but nothing changes.
I also tried to install an other rom by bootloader way, but the rom sais that is not possible to contact with the phone device.
I´m scared and I don´t know what to do.
Know this is the rom´s I have on my Qtek 9100 :
IPL 1.06
SPL 1.06
OS 2.18.7.8
Help please!!
Click to expand...
Click to collapse
With activesync on it will say it won't detect the phone plugged in while it's in bootloader mode. Run the ROM update anyway.

Thanks, but it doesn´t work. The Rom software said that is unable to connect with the phone.
I just tried to install the vanilla WM6, and with zhis rom, the installation could begin, but at 95% it happen an error... and i need to reinstal an other time the vanilla WM6.
I tried an other time, but the same error on 95% :-( And i can´t instal others rom.

did you CID unlock?
enter bootloader and flash the original rom from that screen, then start again. if you don't know how to get into bootloader screen or what CID lock is, read the wiki and the stickies in the forum. Don't worry, it is not a brick

bbobeckyj said:
did you CID unlock?
enter bootloader and flash the original rom from that screen, then start again. if you don't know how to get into bootloader screen or what CID lock is, read the wiki and the stickies in the forum. Don't worry, it is not a brick
Click to expand...
Click to collapse
Thanks a lot for our support! I still tnhinking I have a brick :-S... Now It only apears the bootloather screen(three colors bars) due to the incompleted vanilla WM6 uppdate.
I think the CID is unlocked. I runed the Lokiwiz, but now, I am not sure if It worked... And now, the phone is without battery!!
Where I can find my original rom? The device is from T-Mobile and is a MDA VARIO. From Austria. I have 2 CD´s, one with windows 5 applications, and other with software... I can´t fin the rom.
Thanks a lot!!

there is a link to the US tmobile ROM in my signature. it may work, i don't know.
as for the dead battery, you have a few options,
1) charge the battery in a desktop charger such as this one from ebay.
2) try charging in a friend's wizard
3) i have read references to charging the battery with a n-i-n-e v-o-l-t battery and a p-a-p-e-r-c-l-i-p (i've typed it like that because there are getting more and More references to things than actual solutions when you search) battery many times, try googling this site for that (again in my sig).
the ROM is not on any CD they give out with it because they don't want people flashing their devices and ending up in the situation you are - why do you think they are locked.

bbobeckyj said:
there is a link to the US tmobile ROM in my signature. it may work, i don't know.
as for the dead battery, you have a few options,
1) charge the battery in a desktop charger such as this one from ebay.
2) try charging in a friend's wizard
3) i have read references to charging the battery with a n-i-n-e v-o-l-t battery and a p-a-p-e-r-c-l-i-p (i've typed it like that because there are getting more and More references to things than actual solutions when you search) battery many times, try googling this site for that (again in my sig).
the ROM is not on any CD they give out with it because they don't want people flashing their devices and ending up in the situation you are - why do you think they are locked.
Click to expand...
Click to collapse
Thanks a lot!! But it doesn´t work. Error[294] Invalid Vender ID :S
I can charge the battery with the normal charger to 220v.
Any idea??
My IPL is 1.06
and SPL 1.06

did you buy it from tmobile or ebay? (is it german tmobile or just bought in germany?)
go to the tmobile site and look for firmware/software updates for the mda vario. i don't know german so i could not find the mda vario on it

bbobeckyj said:
did you buy it from tmobile or ebay? (is it german tmobile or just bought in germany?)
go to the tmobile site and look for firmware/software updates for the mda vario. i don't know german so i could not find the mda vario on it
Click to expand...
Click to collapse
I bought yesterday on a T-mobile shop from Austria. I downloaded it´s roms... but the same problem.
I will carry the device to the shop...
Thanks a lot!!

try this button rom
http://rapidshare.com/files/18212239/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe.html
then have you followed the intructions in Dr Ps thread
http://forum.xda-developers.com/showthread.php?t=285435
do not give up

bbobeckyj said:
try this button rom
http://rapidshare.com/files/18212239/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe.html
then have you followed the intructions in Dr Ps thread
http://forum.xda-developers.com/showthread.php?t=285435
do not give up
Click to expand...
Click to collapse
Thanks again, but I returned the phone to the shop. Something didn´t work since the beginning. Tomorrow I will reveive a new one...
Thanks an other time!

Hi,
I got a similar problem.
I wanted to install the latest AkU 3.3 on my MDA VARIO but it stopped at 95%.
So I tried to install the oldest version available from T-Mobile Germany.
But now my device restarts again and again.
It says
IPL 1.06
SPL 1.03
OS 2.24.2.8.
and restarts.
Sometimes (with the oldest software version) I can calibrate my touchscreen and then the device installs the T-Mobile software. After that it restarts again and again.
I also tried softrest after the message: in 3 seconds .... software will be installed. Then it reboots and sometimes wm5 starts but is running VERY slow. I can't switch it off using the power buttom.
I unlocked my MDA Vario using Lokiwiz. No CID Unlock just Unlock.
What can I do?
Thanks in advance

very simple, flash back to your original rom, then, CID UNLOCK

how to upgrade orange touch diamond ROM

Hi i have a orange unlocked touch diamond and it has 1.37.405.1 WEE Rom Date 12/06/08 Protocol Version 52.26a.25.09H. i bought it off some one from ebay. i want to upgrade the ROM on it cos it gets quite sluggish some times etc. I tried HTC.com to upgrade the Rom but it says its not suitable with my Touch diamond. can please one of the senior members help me as i have never flashed the ROM before, if I flash my ROM would my phone will get locked again on orange network as originaly phone was locked on orange.
thanx

Read the stickies in the ROM Development section.
Just download and install HardSPL then the ROM of your choice.

faz786 said:
Hi i have a orange unlocked touch diamond and it has 1.37.405.1 WEE Rom Date 12/06/08 Protocol Version 52.26a.25.09H. i bought it off some one from ebay. i want to upgrade the ROM on it cos it gets quite sluggish some times etc. I tried HTC.com to upgrade the Rom but it says its not suitable with my Touch diamond. can please one of the senior members help me as i have never flashed the ROM before, if I flash my ROM would my phone will get locked again on orange network as originaly phone was locked on orange.
thanx
Click to expand...
Click to collapse
once unlocked flashing it won't lock the phone.....once its open its open
look at my signiture and try what i use
but please read the all the info given before you start
if you do...all is well...if you don't...you could brink the phone...
good luck!

thnx i give it a go
thanks for all of your input i give it go see how it goes if i brick my phone then guess i'll be stuffed. lol

no luck error 260 and 202
Hi, i did the same as u told me i downloaded the HardSpl developers edition 1.40 and tried to run it but in the 3 stage it says diamond not connected with active sync but it is connected. don't know what the problem is i even tried different versions of hard Spl etc
regards

Hang in bootloader

Hi @ all,
**** happens, yesterday i tried to upgrade my rom on charmer (mda compact 2).
During installation system hangs on and didn´t finish.
So now i have only the startscreen and can reach the bootloader.
Tried now to flash an original rom, the ruu says error 294 invalid vendor id.
Otherwise the ruu (for no id) ended with error 238 file read.
My bootloder shows IPL 1.12, SPL 1.12 and USB connected.
I have read a lot of threads but cant find a answer for that.
Has anyone a good idea?
Thanks a lot for helping.
I wish all users in that great forum a happy new year
ronni

Hi Ronni,
same problem here. Do you found any solution?
Is it right, that your Device not charging and USB is not recognizing too?
Bg
Joy

Are you trying to flash WM6 ROM to your charmer? Because WM6 required IPL and SPL level at least 2.xx.
Did you tried this method to bring charmer back to life?

wow, thank you for your quick response. Hmm, I´m not shure, it´s a PDA from a Collegue, I don´t know, what he do with it. (I know only he try to flash something) Next week he take it to our office, then I try your solution
Thank you again
Joy

Bootloaderhang
Today i tried to update my rom... while the update i had an error.
i had updated the http://forum.xda-developers.com/showthread.php?t=363882
after the hardreset the phone hang by the first screen. I can press everething but nothing happens.
now I tried to flash a nother rom but it is unpossible because it can´t connect with windows mobile center on the pc.
Has anyone a good idea?
Thanks a lot for helping.
I wish all users in that great forum a happy new year
didi500

[SOLVED] Noob needs help! Is my qtek9100 a brick?

Hi!
this is my first post here, so sorry for my bad english or mistakes
i bought a qtek 9100 on ebay, and i'm wondering if it's a brick or not. i received the device 3 days ago. during this time i read through a LOT of threads here, tried a few things and nothing works.
here is some info:
- the phone is a qtek 9100 without branding
- the IPL is now 1.01 (i flashed "CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE" successfully)
- the SPL is 2.18 (because of the missing suffix ".0001" i guess it's a G3)
- GSM is 01.12.10
- OS is 1.5.4.2
- when i start the device (without any button pressed) it stops at the splash screen (which was a qtek logo before flashing, and is now this picture with a beer, that says "some things last forever" )
- i can get into bootloader screen (color screen) by holding camera button while starting
- in bootloader screen a small "USB" appears when i connect cable to usb on pc
- when i press communicate and voice buttons (on the sides) while starting, the "Press send to restore factory default" screen appears, but pressing send prints out "Format FAT Partition Format is Failed"
- the device gets recognized by windows ("Mobile Device" appears on my computer)
- ActiveSync 4.5 does not connect to device, not even as guest.
- when i hit "Connect..." in ActiveSync's connection settings, nothing is found
("Allow USB Connections" is ON)
- the device is CID-locked ("FF" state in Mtty 1.42)
- i can't unlock CID, because i can't get "EnableRapi.cab" onto the device without ActiveSync connection
Ok, these are basically the things i know now. The problem is that i never saw any other screen then the "HTC" boot screen, the "Qtek" splash logo (the one with the clouds) before i flashed with custom ruu wwe, after that i see the new splash logo, and i can get into bootloader (color) screen. I never saw any windows mobile running on this device! I could never establish a connection with ActiveSync!
So i hope that someone here on this nice forum can help me get this device to work (WM5 would even be enough right now) or at least give me a hint!
Thanks in advance!

Put the phone in bootloader mode and flash back to the original ROM.

since i bought it in ebay i don't have the original rom of this device.
but i found "233309-qtek9100_2180707_21807109_20710_qtek_ger_ship.exe" through google, which seems to be an original qtek rom (version 2.18). shall i flash this one?

You can find in the Wiki the latest official roms of every brand for our Wizards .-

ok, thanks.
i found one (Qtek GER 2.18.7) and flashed it. the process was successfull, now the IPL/SPL is both 2.18 . But the device still doesn't start and stops at the splash screen (which is now the original qtek splash again). I can still get into bootloader mode and hard reset results in "Format is failed"! No ActiveSync connection either... how should i proceed now?

i basically narrowed it down to these two problems:
- the splash screen freezes
- hard reset error "Format is failed"
( IPL: 2.18, SPL: 2.18 )
can't anybody help please?
i'm freaking out about this

With everything i’ve read the only people who’ve had any success had CID unlocked devices.

ok, i think that too for what i've read so far...
is there any other way of CID unlocking except lokiwiz (can't copy enablerapi.cab without activesync!)?
would this imei-check service that i've read about work in this case?
meanwhile i've also tried something with mtty (r2sd all) but doesn't work -> "didn't get proper security level"
is this also because of the CID lock? i tried to find out the right password to enter in mtty, but found nothing that worked...
does anybody know the correct password?

I couldent CID unluck my 9100 with lokiwiz so i did it 5min ago with Wizard Service Tool (ha to reboot my computer).

I'm having the exact same problem,
except I can't flash any other ROMS so I'm stuck looking at this incredibly frustrating beer picture, with "some things last forever".
Does anyone have any further ideas?

Look up the orignal rom on the wiki, get into bootloader. And flash it back.
Jodda said:
I'm having the exact same problem,
except I can't flash any other ROMS so I'm stuck looking at this incredibly frustrating beer picture, with "some things last forever".
Does anyone have any further ideas?
Click to expand...
Click to collapse

Jodda said:
I'm having the exact same problem,
except I can't flash any other ROMS so I'm stuck looking at this incredibly frustrating beer picture, with "some things last forever".
Does anyone have any further ideas?
Click to expand...
Click to collapse
Hi Friend!
I have the same problem with my Qtek9100!
Any ideas? have you solved your problem?
I have the frustrating beer picture
Please help me.
Very Thanks

Like I sad before
Get into bootloader, flash back the original rom and try again.
mizobuchi said:
Hi Friend!
I have the same problem with my Qtek9100!
Any ideas? have you solved your problem?
I have the frustrating beer picture
Please help me.
Very Thanks
Click to expand...
Click to collapse

I put the original rom.
But... the problem is the same.
when I started the device (without any button pressed) it stops at the splash screen (which has a qtek logo before flashing)
- i can get into bootloader screen (color screen) by holding camera button while starting, I installed the original and others rom who days before works perfectly... Now... this stopped at splash screen
- when I tryed to format.. = "Format FAT Partition Format is Failed"
Any idea?
I have tried this : http://forum.gsmhosting.com/vbb/showthread.php?t=332143
but... without success.
Could you help me, please?
Very Thanks

i'm still stuck with the same problem with hang up on qtek splash screen, too!
i have IPL 2.18 and SPL 2.18 and i can get in boot loader screen and connect with usb. (but no activesync connection!)
formatting doesn't work either.
does anybody have an idea how to solve this?? it's frustrating... i've tried almost every guide here on the forums.

same proplem here with
ipl 2.16
and spl 2.16

I used this to fix this problem
Hi i had the same problem the other week, installed a dodgy app, went to do a hard reset and wouldn't do a hard reset format failed. Tried updating rom everything worked ok until you booted it up. Wouldn't go past second splash sreen. After a few hours of trawling round i found this thread.
http://forum.xda-developers.com/showthread.php?t=276963&highlight=format+is+failed
worked for me. Hope this helps you out.

Problem in connecting to my PC
Hey ,
I just bought a qtek 9100 a day before ... I tried to connect it with my computer.. instead of connecting my battery gets charging well can u plz help me out !
is there any software that i should install in my pc in order to get it connected to my PC...... please help me fast ! Lot of work is pending !
Thanks
Salman

Ok guys, I finally have this SOLVED.
My QTEK 9100 is working fine now!!!
I'm so happy with it right now
Since nothing I tried worked, I went to imei-check.co.uk and got my phone completly unlocked! It only cost me about 11€ and since it works now I have to admit that it was worth it (no advertising). After the unlocking was done I could do the "r2sd all"-method (Tool: MTTY 1.42) using a miniSD card. You can find a good tutorial on this board somewhere. After that everything was just fine...
-> I never saw it working and Hell Yeah: This baby just kicks a$$ !!! (although it's kinda 'oldschool' these days )