WTB: 8925 flex ribbon cable - Tilt, TyTN II, MDA Vario III General

I'm was doing an LCD replacement and I tore the main flex ribbon cable, i was wondering if anyone could sell me a used one here.
Thanks!

Related

Need a new flex cable ribbon

Does anyone have this part? I fell off my motorcycle and the screen popped off the rails and snapped the ribbon connecting the screen to the body.
I live in the US and can pay through paypal
I don't, but you can buy them online. Try ebay, and also www.ppctechs.com

How to fix Flex cable to board problem...

So my original problem is here:
http://forum.xda-developers.com/showthread.php?t=788115
And now, I am researching how to fix the flex cable connecting the LCD screen to the board to get landscape mode to automatically switch.
Any ideas or threads on how to take apart and fix this problem? Even buying the parts is probobly less expensive than buying a new xperia.
Just purchase a new flex cable and search internet for disassembly/reassembly videos.
Yup, you gotta take the Xperia apart, it's alot simpler than you think. Just takes time.
I agree, you need a new flex cable, and that cable connects to the back of the 'motherboard' and the screen. It is covered in this silvery-colored tape, but gently tugging should do it.
I've bought a flex cable cable off eBay, and it worked!

Parting out Nexus 7

Hey guys, I'm considering parting out my nexus 7 because its digitizer is partially broken. I was just wondering if you guys have a need for any of the parts, and what you would pay for them. I'm not selling the parts yet, just getting an idea of if its worth my time to do so. Thanks!
I'll take the back cover for $10 shipped to Miami.
Sent from my Nexus 7 using xda premium
lamboboy732 said:
Hey guys, I'm considering parting out my nexus 7 because its digitizer is partially broken. I was just wondering if you guys have a need for any of the parts, and what you would pay for them. I'm not selling the parts yet, just getting an idea of if its worth my time to do so. Thanks!
Click to expand...
Click to collapse
I'll buy the LCD flex cable (photo below). I'll offer $10 incl mailing it to St Louis.
It's the little short cable that pops off the main board - it's located in a small gap between the battery and the main board.
You have to be very careful with this cable as the LCD end is damaged very easily. Do not pull on it at all.
To remove it, you have to
-remove the battery,
-remove all the small screws holding in the sub chassis - unscrew the speaker
-pop off the upper connector - it just pops straight up - do not pull on the cable though
-remove the digitizer cables - flip up the white cable clamps at the rear of the 2 connectors
-remove the subchassis - you'll have to remove the copper heatsink that is taped to the back of the LCD
- flip up the black cable clamp on the rear of the LCD flex connector and carefully slide the connector straight out without bending it up at all.
Let me know if you're interested.
Thanks
Thanks for the replies. Ill let you guys know it I'm going to sell the parts.

[Q] Damaged a ribbon cable plug when replacing screen, now what?!

Hi all,
I almost perfectly repaired my HTC One M7 but whilst taking it apart some tape snagged on one of the connectors and ripped the cable out of the snap/pop connector. I have some high res pics here, best I could do...
http://imgur.com/a/VVCrR
I think all but one ofthe pins are there, but some are pushed down so the cable can't split them to fit inbetween. I can't find a magnifying glass to try and part them carefully at the mo but will look tomorrow.
If I can get them apart and get the cable to fit I imagine I could solder a wire or somehow get the missing pin to connect?
Any ideas?

Where can I buy a new LCD cable?

I managed to break the cable that connects the motherboard to the LCD. Does anyone know where I can buy a new one?
Here is a picture of it i.imgur.com/asj0d4h.jpg
Found my answer
http://forum.xda-developers.com/x98-air/help/lcd-fpc-flat-cable-t3298720#post66021627

Categories

Resources