Database Develop

upgrade xda1 wm2003

Hello, i'm newbie.
i need help comment/links for upgrade my xda-1 wm2002 to wm2003.
rom version: 3.20.06 ENG
rom date : 07/30/03
radio version: 4.21.00
protocol version: 3s54
thanks.
-dc-

Ok here you go, its a little outdated but its what I still use:
Qman's how to use XDArit to write nk.nb1 or nk.nbf to your SD card aka the Bootloader Method!
1. Place XDArit and the nk.nb1 or nk.nbf file in the same folder and start XDArit.
2. Select your SD card (disk drive) from the drop down menu.
3. Select Write to SD
Notice that the Windows CE box is already checked so just click the browse button at the end of that window.
4. Select your (nk.nb1 or nk.nbf) image and then Open
Notice by default XDArit will open looking for a *.nb1 file but if you're going to use a .nbf file you'll have to manually change the "Files of Type" to *.nbf
Notice that nk.nbo / nk.nbo was automatically added as your boot-loader and its check box is unchecked so leave it that way and click OK. XDArit should start writing to the card.
When XDArit has finished writing the image put the SD-card into the XDA and hold the power button and soft reset. You'll be taken to the below screen:
SD DOWNLOAD
Card Type:
CE OS & BOOT
Press action to Download
Or
Press REC to Exit
Press action to download and it will start the download/restore from the SD card.
Follow the on screen instructions once its "Completed" which will consist of a "Soft Boot/Reset".
Click to expand...
Click to collapse

How to: Remove Olipro Hard-SPL 1.40

Once finished you will have:
IPL-0.20
SPL-0.24.0000
* Requires MiniSD card
On your PC
---
1. Copy the files in "jumpspl-urt.zip" to the root of your device. The detailed steps for this are:
i. Connect to your PC via ActiveSync
ii. Click "Explore" in ActiveSync
iii. Open "My Windows Mobile-based Device". You should see a dozen or so files.
iv. Drag-and-drop the files inside "jumpspl-urt.zip" into the "My Windows Mobile-based device" window, which is the root of your device.
2. Prepare a FAT32-formatted SD card with CHEEIMG.nbh (tested using 81Mb image extracted from Treo750_2_30_VF_NZ_DesktopUpdater)
i. CHEEIMG.nbh has to include the bootloader to be flashed
ii. This particular bootloader ONLY accepts SD cards or Serial, no USB connection, until you've flashed, then it supports USB.
On your device
---
1. Open "File Explorer". Browse to the root of your device.
2. Insert your SD card with CHEEIMG.nbh
3. You will need to press the bootloader key (side convenience key) while clicking on "jump-urt". Press the bootloader key 1 second BEFORE you click on "jump-urt". Keep holding the side convenience for at least 5 seconds until the bootloader screen actually appears.
4. Upgrade starts (let go of convenience key now). My device rebooted after 10 seconds and continued upgrading again. I assume this was due to the bootloader needing to be restarted.
Q&A:
Q: Can I now get rid of hermes radio from hell (1.54.30.10)?
A: No, as the radio bootloader itself won't talk to this bootloader (or any other Cheetah bootloader known to man at the moment ). Damn thing. I only downgraded bootloader to try and get rid of it.
According to summiter, someone would have to convert a Hermes bootloader to Cheetah (similar code, but different memory locations) before we can get rid of the 1.54.30.10 radio rom. Using an older bootloader like this doesn't help.
Q: Does task 2a work?
A: When tested with radio rom 1.54.30.10: No, same as hard-spl. I would've thought it would work actually, but no.
Q: How do you know this has really worked?
A: You can't flash anything other than factory roms
Q: Why would you want to load this?
A: Selling the device, sending in for warranty etc.

Thanks for the suggestion. I tried your procedure but it did not restore the original SPL.

re
When you ran the jump-urt program from File Explorer on the device, what happened?
- Were you prompted to "Run this program"? (You won't be if you've already removed the security requirements from the phone by unlocking it)
- Did it reboot to the tri-color bootloader screen?
- What did the IPL/SPL versions show? They should show already the 0.20/0.24 versions at this point.
Was the jump-urt program in the root of the device - not in "my documents"?

Hi,
My 750 is an unlocked 750 from the start. When I clicked the jump-urt program (all in root directory) from Explorer it started I was prompted to run jump-spl. I said yes then the I was booted to the tri-color screen. Bootloader update from the sdcard was immediatelt started after I press the red poweroff button. After the successful update still the bootloader showed olipro 1.4.

re
Try do the same process, but leave out the SD card. This way it will stay on the bootloader screen - can you let me know what ipl/spl versions are shown?

Still it did not work. Still showed Olipro 1.4. Anyway I gave the Treo to my sister as a gift. She does not care nor understand this bootloader problem.

awojtas said:
Once finished you will have:
2. Prepare a FAT32-formatted SD card with CHEEIMG.nbh (tested using 81Mb image extracted from Treo750_2_30_VF_NZ_DesktopUpdater)
i. CHEEIMG.nbh has to include the bootloader to be flashed
Click to expand...
Click to collapse
Hi, Can you please confirm something. I looked at the files in the desktopupdater.zip (voafone Australia 2.18)
CHEEIMG.nbh is ony 258KB not 81MB. However, the CHEEIMG_FW.nbh file is 81MB
Do I put both CHEEIMG.nbh and CHEEIMG_FW.nbh on the SD card? or do I rename CHEEIMG_FW.nbh to CHEEIMG.nbh and put that on the SD card?

rename cheeimg_fw to cheeimg.

Finally go around to trying this. does not work for me either.

ok... but if the phone dosen't boot/start... how can i remove it?

Here's the way to remove SPL-1.40.Olinex:
1- Download the attachment from this post:
http://forum.xda-developers.com/showpost.php?p=1562747&postcount=1 and put the file JumpSPL.exe in "\My Documents" (on the Palm).
2- Download the attachment from awojtas and put the file urtspl.nb also in "\My Documents".
3- Run (from the Palm) the file JumpSPL.exe and replace 0x0000000 for 0x30080000 when asked. Then it will ask for a .nb file, select "All folders" and click on urtspl.nb and quickly press the camera button. If the device reboots, try again and be faster this time.
After this you should now see:
Palm Tr
IPL-0.20
Palm Tr
SPL-0.24.0000
Do it all again with a SD card in and whatever .nbh you want inside it and wait for flash process to finish.
That's all.
Cheers!

mabe the wrong post...but how do you UN-remove Hard SPL (aka... put it on your phone)?!
LOL

is that possible for me to use this method for my panther(treo pro) since similar system configuration for both 750 & 850

OMG it finally does work
Thanks !!!
I used CHEEIMG_FW.nbh (renamed to CHEEIMG.nbh) from 2.27 ROW Updater
And this fixed the programs folder/menu lag in factory ROM

750 Dead after flashing with wrong OS

Hi everyone,
I have a big problem and I need urgent help please. I have ATT 750 unlocked and I'm outside the States now. My Treo was 6.0 then I upgrade it to 6.1 so far so good.
Then I saw a custom rom that I thought it was interesting. the custom rom was for HTC Dimond I think. without paying too much attention. I started the upgrade. It went 70% before the upgrade crashed.
Now my Treo is not responding to anything. I have the original ATT 6.0 SD upgrade and I have the 6.1 lite upgrade. I'm using CheetahUnlocker to flash the SPL (that is working) but when I try to install the 6.0 or 6.1 using Kaiser Custom RUU v1 it crash.
I saw an earlier post that suggest to place the original 6.0 on a freshly formatted SD and install from there. that is not working either. when I try to install the software it goes into these steps before it crashes: btw, I have the tri-color bar and it has the following info:
CHEE100
IPL-0.20
SPL-1.40.01iNex
while update in progress i see the following:
CHEEIMG.nbh
SPLASH1 - OK
BOOTLOADER - OK
GSM - OK
MicroP - OK
EXTROM - Fail
OS -
After the crash I get this msg: "Update Terminate Update Failed"
Any suggestion please? need more info? then let me know
Thanks in advance
Sam

Someone please help.... I'm sure someone has some suggestions.
By the way, I've tried RUUwrapper and that didn't help either.
Thanks in advance

I've got the same problem and finally I can solve my problem.
The procedure :
1. Open mtty and by connection via usb, just do :
Command mtty:
- task 2a
- flash:
[1- press enter
2 - type "set 14 0"
3 - type "task 28 55aa"]
you shoul see now the program runing a lot of things that I don`t remember what...
then when it ends try the SD instal...
If It still doesn`t work then:
[1- press enter
2- "erase"
3- "checksum"
4- "checkimage"
5- "task 0"]
then reflash your radio & OS by SDCARD...
- set 16 0 0
- info 7
- info 8
2. It means your PDA has no ROM OS and Radio.
3. Copy CHEEIMG.nbh (ROM OS) to formatted SD Card.
4. Insert the SD Card to PDA and just install by push the 3rd side button together with soft reset (by stylus).
5. Replace file CHEEIMG.nbh (ROM OS) with CHEEIMG.nbh of Radio.
6. Do same procedure as number 4.

new rom dont update

i think , i was do something my Xperia
now i dont update new release ROM 3A
what i must do?
boot screen wrote
KOVS110
SPL-0.72.0liNex
MicroP1-787
MicroP2-707
srry my bad english
HELP MEEEE plss.
thnx for all help

ufkozcan said:
i think , i was do something my Xperia
now i dont update new release ROM 3A
what i must do?
boot screen wrote
KOVS110
SPL-0.72.0liNex
MicroP1-787
MicroP2-707
srry my bad english
HELP MEEEE plss.
thnx for all help
Click to expand...
Click to collapse
You hardSPL'ed your X1 correct, now you need to download the ROM you want (stock or cooked).
And follow the steps from Step 2 here:
http://forum.xda-developers.com/showthread.php?t=446070
gl

Lokatho said:
You hardSPL'ed your X1 correct, now you need to download the ROM you want (stock or cooked).
And follow the steps from Step 2 here:
http://forum.xda-developers.com/showthread.php?t=446070
gl
Click to expand...
Click to collapse
dude
he explain for fixes
"Attention! Couldn't do this on a Vista machine, had to use my XP notebook!
- Download the file you want to use and rename it from *****.image to ****.image.nbh
- Run NBHUtil
- Go to "Extract NBH" tab
- Choose *****.image.nbh
- Now you should see something like this:
Model ID: KOVS*****
Target CID: 11111111
Version: 1.02.932.3
Language: DEU Remember what it says here. Could be something else for you, depending on the language of the file you want to use!
Chunk Size: 64
- Click the "Extract" button next to OS:
- Save it as OS.nb
- Go to "Build NBH" tab
- Select the X1 as model
- Set language to the value you should remember ;-)
- Click on "..." next to OS:- Select the previously extracted OS.nb file
- Click "Build NBH"
- Save it as "Kovsimg.nbh"
Now you can continue with step 1 or 2.
but ..
this step
- Click on "..." next to OS:
not posibble
because look at the picture havent it? "...." how can be? pls help me

I'm not sure if I understand your problem, but why don't you follow this procedure http://forum.xda-developers.com/showthread.php?t=445662
"
0. Make sure x1 is hard-spl first - this is OK in your case
1. Make sure yr micro-sd is formatted w/ fat-32 - if you have no data on your card better format it again.
2. rename the image file (normally "ruu_signed.nbh") to Kovsimg.nbh, copy that to the micro-sd, and put that it yr X1
3. Bring x1 to boot-loader mode by turning off the x1 completely. Hold the "volume down" button on the right, and hold the power on button until you see the tri-color screen.
4. Then follow the on-screen instruction
"
5. After successful flashing remove battery for while
6. Optionally - do hard reset combo: press & hold two silver buttons under screen and press for short while power button, then follow the on-screen instruction
If you have no special reason it is better to use this method for flashing every rom.

netbat said:
I'm not sure if I understand your problem, but why don't you follow this procedure http://forum.xda-developers.com/showthread.php?t=445662
"
0. Make sure x1 is hard-spl first - this is OK in your case
1. Make sure yr micro-sd is formatted w/ fat-32 - if you have no data on your card better format it again.
2. rename the image file (normally "ruu_signed.nbh") to Kovsimg.nbh, copy that to the micro-sd, and put that it yr X1
3. Bring x1 to boot-loader mode by turning off the x1 completely. Hold the "volume down" button on the right, and hold the power on button until you see the tri-color screen.
4. Then follow the on-screen instruction
"
5. After successful flashing remove battery for while
6. Optionally - do hard reset combo: press & hold two silver buttons under screen and press for short while power button, then follow the on-screen instruction
If you have no special reason it is better to use this method for flashing every rom.
Click to expand...
Click to collapse
ye dude i know this step but
i was wrote how to do Kovsimg.nbh" explain
i have problem this step
do u explain me?
(srry my bad english)

netbat said:
I'm not sure if I understand your problem, but why don't you follow this procedure http://forum.xda-developers.com/showthread.php?t=445662
"
0. Make sure x1 is hard-spl first - this is OK in your case
1. Make sure yr micro-sd is formatted w/ fat-32 - if you have no data on your card better format it again.
2. rename the image file (normally "ruu_signed.nbh") to Kovsimg.nbh, copy that to the micro-sd, and put that it yr X1
3. Bring x1 to boot-loader mode by turning off the x1 completely. Hold the "volume down" button on the right, and hold the power on button until you see the tri-color screen.
4. Then follow the on-screen instruction
"
5. After successful flashing remove battery for while
6. Optionally - do hard reset combo: press & hold two silver buttons under screen and press for short while power button, then follow the on-screen instruction
If you have no special reason it is better to use this method for flashing every rom.
Click to expand...
Click to collapse
i copy standart stock my m.sdcart and boot my phone but only "serial" on 4 color screen how to use my msdcard?

step by step:
1. you wan to have stock rom.
You go to http://blog.fastgsm.com/sonyericsson/r3a-software-for-sony-ericsson-xperia-x1/ and download file you want.
For example file for "XPERIA X1 Generic UK R3AA010 Software Update" is "APP_SW_X1i_GENERIC_UK_CDF1215-1832_KOV_R3AA010.exe"
2. Now double click on this file in windows and unpack it. You will get another file something.image or whatever.
3. rename this file to kovsimg.nbh
make sure you can see in windows files extensions like .exe or .nbh
4. copy kovsimg.nbh directly on your sd card
5. now you should be ready for update
If you do this and boot loader can't find file - format your sd card again (not quick format bur normal format).
I hope this will help.

netbat said:
step by step:
1. you wan to have stock rom.
You go to http://blog.fastgsm.com/sonyericsson/r3a-software-for-sony-ericsson-xperia-x1/ and download file you want.
For example file for "XPERIA X1 Generic UK R3AA010 Software Update" is "APP_SW_X1i_GENERIC_UK_CDF1215-1832_KOV_R3AA010.exe"
2. Now double click on this file in windows and unpack it. You will get another file something.image or whatever.
3. rename this file to kovsimg.nbh
make sure you can see in windows files extensions like .exe or .nbh
4. copy kovsimg.nbh directly on your sd card
5. now you should be ready for update
If you do this and boot loader can't find file - format your sd card again (not quick format bur normal format).
I hope this will help.
Click to expand...
Click to collapse
i understand dude
itry FAT & FAT32 format (no quick format)
but i cant
im not stupid
i put m.sd card on xperia
it write serial on screen
how can? i do??

ufkozcan said:
i understand dude
itry FAT & FAT32 format (no quick format)
but i cant
im not stupid
i put m.sd card on xperia
it write serial on screen
how can? i do??
Click to expand...
Click to collapse
There are some SDcards that don't work with the flash by SDcard method.
So you'll have to try with flashing with your pc.

Lokatho said:
There are some SDcards that don't work with the flash by SDcard method.
So you'll have to try with flashing with your pc.
Click to expand...
Click to collapse
ok i will try
how?

1 - download the attached CustomRUU
2 - extract and place in the same folder as your *.nbh ROM file
3 - connect your phone with pc (activesync or windows mobile device center)
4 - when connected execute CustomRUU and follow the steps
5 - wait until finished (may take a while)
gl

Lokatho said:
1 - download the attached CustomRUU
2 - extract and place in the same folder as your *.nbh ROM file
3 - connect your phone with pc (activesync or windows mobile device center)
4 - when connected execute CustomRUU and follow the steps
5 - wait until finished (may take a while)
gl
Click to expand...
Click to collapse
thats ok thnx dude
now "APP_SW_X1i_VFE_UK_CDF1215-0285_KOV_R3AA013" last version
but boot screen write
KOVS110
SPL-0.72.0LiNex
microP1-787
microP2-707
is it normal?everything is orjinal? ??
idon think its normal SPL
how to return normal SPL? (for i want to use sony ericsson update program)
iwant to remove it

Goldcard fail, please help

Hi,
I wanted to flash official froyo ruu
and downloaded it ( http://www.filefactory.com/file/b4b...5.55.24H_3.35.20.10_release_160191_signed.exe )
i couldnt do it with htc sync it gave me 131 customer id error. people told to go with goldcard.
i read here: http://forum.xda-developers.com/showpost.php?p=8105075&postcount=42
and got my cid, as below:
Executing adb shell cat /sys/class/mmc_host/mmc1/mmc1:*/cid
Reading adb output
------------------------
1b534d3030303030101ae4b6cd00a840
------------------------
CID: 1B534D3030303030101AE4B6CD00A840
Reversing CID
CID: 00A800CDB6E41A1030303030304D531B
Click to expand...
Click to collapse
i created goldcard.img with 1b534d3030303030101ae4b6cd00a840 (by using goldcardtool.exe from - klutsh's gold card tool)
i also got the rom.zip file and copied to the sd card.
NOW; what should i do???? i am going to recovery menu when turning on the phone but cant install it like i do before (like cyanogenmod rom..etc by selecting install from sd card - it is giving error).
also, which cid i should go with 1b534d3030303030101ae4b6cd00a840 or 00A800CDB6E41A1030303030304D531B
goldcard.img is 1kb only, is it ok?
Please help, i need to unroot this phone because i am going to sell it...

found the solution:
you need to change rom.zip's name,
in recovery boot, the system is looking for file names, mine was pc49img.zip
so, i changed the name and it worked
froyo working great, couldnt find any bug