I was wondering about how to install the .net file from microsoft. Someone told me to do it through activesync but I don't understand how to actually install it to the phone from activesync. Any help will be appreciated.
Not sure if this is the proper way to link you to the file, but this is what I used to install .net 3.5 on my fuze:
http://justpctech.com/PPC/NETCFv35.wm.armv4i.cab
Hope that helps (Sorry, I couldn't figure out how to attach the file).
thank you. I hope it works.
I was wondering about how to install the .net file from microsoft. Someone told me to do it through activesync but I don't understand how to actually install it to the phone from activesync. Any help will be appreciated.
Assuming you are serious
fiendslyr said:
I was wondering about how to install the .net file from microsoft. Someone told me to do it through activesync but I don't understand how to actually install it to the phone from activesync. Any help will be appreciated.
Click to expand...
Click to collapse
I'm gonna play nice with this as your posts would indicate you are somewhat new to this sort of thing
Basically download the file from MS to your pc or laptop.
Sync your phone to PC or Laptop using activesync. Once you have done this run the .exe file on your pc or laptop and it will automatically extract, install to your pc/laptop and install what is required to your phone. Done.
Quite easy really.
Oh, a word of advice.
One would assume you are installing this so you can run Advanced config or something of that nature. Pls pls ensure you read up on tweaking prior to making changes. Advanced Config is basically a GUI interface to your phones registry. Bugger your reg up and its hard reset time baby!!
nah, im not that new. I already installed .net. Now that post again was due to something random I don't know about. However, i would like to know if i am supposed to uninstall the previous version of .net or does the touch pro go ahead and use the newly installed one. I'm wondering this because I know some people were having this problem.
fiendslyr said:
nah, im not that new. I already installed .net. Now that post again was due to something random I don't know about. However, i would like to know if i am supposed to uninstall the previous version of .net or does the touch pro go ahead and use the newly installed one. I'm wondering this because I know some people were having this problem.
Click to expand...
Click to collapse
You do not uninstall version 2 -- some programs need that instead of 3.5. As for configuring, use .net config. Go here for instructions and download: http://www.modaco.com/content/windo...act-framework-3-5-without-upgrading-your-rom/
Related
Hello all. Just got my phone on Orange and I like it. I have been a Mac-user for the past 12 years so I am used to not tweaking my gadgets. Can someone explain how I install the CABs onto my Kaiser via either my G5 iMac or my intel Macbook. Many thanks
do'h not very sure, but you might want to try the missing sync, grab the latest version, it now supports win5 and 6. basically that's what you need to synch your mac and PDA, but not very sure if you can install 'em through it though
Now how do I find the installed CAB
OK I have downloaded a CAB onto the Kaiser via Missing Sync. (HTC album mui 0419.cab) So how do I now find it on the phone and activate it or any other CAB?
Thanks again
not that hard
I get that you're new, I am too, but try to figure this stuff out by yourself.
Bluetooth should work for getting files onto the phone (my docs/bluetooth)
When you sync to the phone, the PC version is that you see the phone on the schema/folder tree and can choose where to put it.
When you find the cab file, opening it will install it. Generally try to put system specific things on main memory and things like games on a storage card.
Look at some must have threads to find programs that you like and after you figure it out try a hard reset and reinstall things. That will let you keep a stable device.
As for ROMS, I would be careful of even thinking about flashing on a mac unless you find a thread telling you how to do it, you don't want a bricked device.
Remember to search the forums - it's worth your time.
Just mount the kaiser with missing sync. After that, drag and drop the file to a location that you can remember. Once you do that, just go to the file explorer in the kaiser, locate the file, and click. You should be all set.
what about a non-cab files? with an .exe extension, will it be installable trough missing sync?
from what I can remember, Missing Sync is really broken at the moment. (under 10.5).
To install a cab, you just use the tab next to syncronize, what is it, the file tab or somehing?
if it's a .cab, it will be loaded automatically. But make sure there's no spaces/irregular characters on the .cab, otherwise, it won't load the installation, and possibly, the file will not be uploaded at all. I think this is a missing sync bug.
Nope, you're going to have to pull the .CAB out of the .EXE file
jakontil said:
what about a non-cab files? with an .exe extension, will it be installable trough missing sync?
Click to expand...
Click to collapse
chenga said:
Nope, you're going to have to pull the .CAB out of the .EXE file
Click to expand...
Click to collapse
hi chenga, mind to point me how to do so? because i am going to lose my XP system very soon
i ccan't figure this out does anyone can tell me the procedure?
were to download and how to install??
Do a search. on either google or on this forum before asking plz.
This question has been answerd before.
But sins there was no thread that was acualy called like your question ill post the answer and maby next time when someone search they will defenetly find the answer
Go to the link below and download the program and install it on your computer.
When its done it will install it on your phone aswell. (so keep it connectded to the computer while you install it)
http://www.microsoft.com/downloads/d...displaylang=en
Go here
http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
If you read the instructions, it will tell u.
This package uses ActiveSync 4.0 to update the device. Before running NETCFSetupv35.msi, connect your device to your PC. If your device is not connected, ActiveSync will store the CAB file and will not install the package until you connect. If you are not using ActiveSync, run the CAB files on the device that correspond to the device–specific CAB files found in the install folder.
For now, it's not possible to download directly the cab file from MS site
google for the following files:
- NETCFv35.wm.armv4i.cab
- netcfcfg.cab (saves yourself from editing registry)
You will identify trust-worthy locations easy
Easier than you can imagine.
Search MODACO forum ( www.modaco.com ) NETCFCFG.cab and NETCFv35.vm.armv4i.cab
Install both and you will have a simple application in program menu to choose between net 2.0 and 3.5. DONE
You can also choose to use 2.0 for some applications and 3.5 for other
thnks y´all i found it on modaco, got it worked!!
pls help, I can't install it
it writes: "installation error. stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
I cant even uninstall it, and I get this msg always
"installation error. stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
Solution: I kill Kaiser Notification and then I can install .NET Framework without this problem. This app. using .NET Framework.
So I think the solution is in closing/killing all running applications.
What is the "kaiser notification"?
I have the same install error.
Thank you.
i have the same installation error as the last two posters. i tried killing every program i can and i still get the error
me too !......still can not install netcf v3.5 !!
After 2 days searching high & low through internet all discussion session, still can not find a solution. Therefore I made a self tracing and tried all kinds of method, at last I found a solution without doing a hard reset !!
rename mscoree.dll under windows\ to mscoree.dll.txt
re-install netcf v3.5
no more any error code comes up
thats it !!
I am running a tytn II, with the same problem. Install, i get the error. I can't uninstall, atleast not when I try through the 3.5 installer (remove or repair) or the "remove programs" on the kaiser.
I have hard reset the phone 2x,and regardless of whether I am installing from the exe or the cab file on the phone, still get the same error as everyone else.
This past time, i tried changing the name of the mscoree.dll under windows\ to mscoree.dll.txt and mscoree35.dll to mscoree35.dll.txt
same problem. I'm really beyond annoyed. Can someone help?
have a sprint diamond, how do i check which version i have and if its the newest?
it seems like all the programs i try and install say it requires a newer version than the one installed on the device but its only a month old so im not sure.. any help would be great..
thanks!!
I have the same question. I've searched all over and can't find an explanation of what .Net 3.5 is or how to find out if I have it already. I have a Sprint (CDMA) HTC Touch Diamond. Thanks.
I had the same problem on my HTC Kaiser, but I found a solution.
I found a program that acts like safe mode on a computer.
So if you install that program and restart in safe mode (you need to select safe mode when you boot), you will be able to install the compact framework 3.5.
Probable some locked files prevent the normal installation.
The program is an evaluation version, limited to 14 days, but since you only need it for the framework, you don't need to keep if you don't want to.
The app: SafeMode 3
...still not working on my touch diamond.
i've renamed the dll and tried the safe mode app. But I still get the same error.
btw: i have this problem since i installed a cooked rom.
Thanks. Was also having the install issue (I had previously installed and then removed 3.5 but good old ms clearly didn't remove correctly).
Renaming mscoree.dll worked (I tried mscoree2.5.dll before but that didn't work as it was in use so I couldn't rename that).
Glad it worked, was facing dropping back to previous backups or installing a task manager to kill processes (a good task manager program will show all your processes), just to reinstall 3.5.
another thing that goes wrong with the 6.5 wm and tf3d installed:
when you go to the movies, and you put your phone into vibrate, with the left volume keys, the phone goes into vibrate fine,
but when you set it back to full volume, the next time someone calls, it only vibrates, you have to go to: Settings, Sound and change the ringtone manualy to make it ring again...
Sorry, Wrong Forum...
Hi, I've read through quite a few pages but have no luck finding anyone resolving this issue. It's probably a fairly simple fix but I havn't figured it out yet.
Everytime I install an app through .cab file and choose to install it in my 4gb "external storage" it will not run properly. Everything installs perfectly fine but when I try to run it, it tells me something about not certified or some sort. I can't give the exact wording that WinMo said because I'm running chinese version. If anyone has a fix to this it is much appreciated. Thanks.
Search for sdkcert.cab and install it
MarcLandis said:
Search for sdkcert.cab and install it
Click to expand...
Click to collapse
Hi, I've installed the sdkcert.cab but it still does not work... What do I do now?
bump
so can someone on the forum tell me what I need to do for programs running off my 4gb to work? it seems everything I install on the 4gb will show up saying a trusted cert is missing or one of the file is missing. I'm pretty sure one of you guys out there already figured out how to fix this. Thanks in advance.
P.S.- I already installed the sdkcert.cab but it didn't do me anything or I don't know how to set it up.
Hi, I've found out the exact problem but I still need some help. This is the issue: after installation completes, if I run the program within my program list it will show up with a message that says I'm missing a trusted certificate or some sort. However, if I try to run the program from the folder I installed in, it will work, so I'm pretty sure I need to adjust something within the registry to adjust where my shortcuts are directing to. I believe this is an issue due to my Diamond being the chinese version. Anyone ran into similar problems or know how to fix this? Thanks.
how exactly do you upgrade the .NET to 3.5. i downloaded it from the microsoft website and it said it wasnt a valid ppc file.
i used the search function (typed .NET and also tried .NET upgrade) i even tried google. anyway basically all i want this for is so i can use the diamond beer app aswell as any other app i might download or create that might need it.
thank you.
Look here:
http://forum.xda-developers.com/showthread.php?t=468535
install the correct version... correct file is named
NETCFSetupv35.msi (recommended google search)
Greetz
Boris
P.S. you have to install it to ppc from starting it on PC while being connectet to ppc via active sync!!
thanks so i found this site.
http://microsoft-net-compact-framework.en.softonic.com/pocketpc
is there a way to do this with out the active syn. i havent set it up yet and find it easier to just put it on my sd card and install like every other program.
if not thanks for ur help.
I've been trying to install the .NET framework for my Tilt, and it keeps spitting out "installation unsuccessful". It installs fine on my computer, then it goes to install it to my phone via ActiveSync (Windows Mobile Device Center actually because I use Vista). The installation screen on my Tilt pops up saying it's installing, but the bar doesn't move at all, and after a few seconds it just says it's unsuccessful without giving a reason!
I'm using the stock ATT Tilt rom, 6.1 version. I haven't done anything special to it, so I have no idea why it wouldn't work...
Can anyone spare some sage wisdom as to why this won't install? I'm trying to use wmVista and it needs 3.5 to work .
Note: I downloaded the .NET 3.5 right from Microsoft: http://www.microsoft.com/downloads/...49-3c6b-42f1-9fd9-0041345b3385&displaylang=en
Have you tried copying the NET CF3.5.cab directly to your Kaiser & then installing. The cab can be found in the installation folder on your PC or on this site if you do a search.
I've always installed from the cab file never from the PC installation so might be worth you trying it !
You might want to get the mobile version of .net 3.5...
http://frifor.com/download/IBI/NETCFv35.wm.armv4i.CAB
Download that to your memory card, then launch it with file explorer on your phone, and it should start to install all on its own. Install it to your device, not the media card, for quicker running .net 3.5, or if you want to save space install it to the media card, but it will run slower...
And FYI, the search function works very well, as well, if you had looked about 5 posts bellow this new one you created you would have seen a thread already dealing with this exact issue.
pjcforpres said:
You might want to get the mobile version of .net 3.5...
http://frifor.com/download/IBI/NETCFv35.wm.armv4i.CAB
Download that to your memory card, then launch it with file explorer on your phone, and it should start to install all on its own. Install it to your device, not the media card, for quicker running .net 3.5, or if you want to save space install it to the media card, but it will run slower...
And FYI, the search function works very well, as well, if you had looked about 5 posts bellow this new one you created you would have seen a thread already dealing with this exact issue.
Click to expand...
Click to collapse
Ah, I saw that thread before posting but I assumed by his first post that his problem was different than mine. I just check it out again and saw the direct downloads for the cab file, so I'm gonna try that out. Thank you for your help!
(I'm a new poster, but I've been lurking around these boards for a while now looking for stuff for my Tilt)
Hopefully this works...
i installed .NET CF 3.5 on my device then after installing my camera is just plain black and doesnt show any picture.
problem solved!
- i installed Resco Registry Explorer and .NET compact framework 3.5 on my Kaiser
- opened resco registry and searched for the .NET CF
- disabled .NET CF 2.0 by changing value from 1 to 0
- then enable .NET CF 3.5 by changing value from 0 to 1
I had the same problem, used your link, it worked perfectly. THANKS!!!!