I took the Touch HD system response update released by HTC and tried to install it, granted it said wrong device.....so I said hmmm if the hardware is similar lemme extract this file and copy it over in the windows folder.....so I did this not knowing if it was going to start up or not....but to my surprise it did and all I can say is wow....the X1 was retardly fast....shrugs...nothing beats a failure but a try...May be worth it to implement this into the actual roms being cooked.
EDIT: I was using itje's 3.01 rom when I did this.
WC
Wild Child, could you give more details? I grabbed that update and extracted it, and I'm looking at _setup.xml, but see two Folder actions (\Windows and \Temp), and I'm not sure if all 10 files go in \Windows.
I could also try to make an installer that works on any device, but I just have to know the proper file paths.
Also, does it just 'feel' fast, or have you done some real benchmarks?
If the performance gain is that great, then sure it would be worth it to implement this into custom ROMs/X1 installable CAB files.
Thanks for putting up your device to the risk!
which hotfix was it? I tried one and it inverted the screen display. quite amusing to get it back again as the touch screen calibration was still the other way up.
All I did was extract the files attached to the post here, connected phone to computer,copied them into the windows folder,over wrote a setup file and soft rebooted. This was with itje's 3.01 rom installed. Now it may be me but it improved the response of the phone. I didnt do any benchmarks. I figured since the rom files where htc maybe it would help...who knows....lol
WC
tried this patch and wanted to warn everyone. it's rotating the screen 180° but not the touchscreen input like fards said.
use it with caution!
Hmm I didnt experienced any rotating screens on mine. Shrugs.... Using the same files in the X1a nam rom also with now issues.
WC
i've just tried this and it works on itjes 3.01 rom a treat.
http://forum.xda-developers.com/showthread.php?t=473510
Sorry I should've posted that thats the rom I was using....doh. The one you posted isnt the same one I used fards...
http://www.htc.com/www/SupportDownload.aspx?p_id=179&cat=0&dl_id=448
WC
fards said:
i've just tried this and it works on itjes 3.01 rom a treat.
http://forum.xda-developers.com/showthread.php?t=473510
Click to expand...
Click to collapse
i just tested this seems safe. i say test for your self
the device seems very responsive but i cant say for sure if it from this as or from the very nice rom as i only flashed itje 301 rom an hour ago and i have no point of reference
Tried the files I posted on itje's 2.1 and same result...very responsive after reboot.....
WC
Wild Child said:
All I did was extract the files attached to the post here, connected phone to computer,copied them into the windows folder,over wrote a setup file and soft rebooted. This was with itje's 3.01 rom installed. Now it may be me but it improved the response of the phone. I didnt do any benchmarks. I figured since the rom files where htc maybe it would help...who knows....lol
WC
Click to expand...
Click to collapse
t
those files aren't extracted, that's a corrupted cab not a zip file (the second one) they need decompressing. They won't do a thing in the format they are in...
That hotfix isn't needed for the newer blackstone roms as the files are included.
The only ones that do anything are DDI and gxdma
this is the setup xml to give you an idea of the files proper names.
Code:
<wap-provisioningdoc>
- <characteristic type="Install">
<parm name="InstallPhase" value="install" />
<parm name="SetupDLL" value="1" />
<parm name="OSVersionMin" value="3.0" />
<parm name="OSVersionMax" value="4.21" />
<parm name="BuildNumberMin" value="0" />
<parm name="BuildNumberMax" value="-536870912" />
<parm name="UnsupportedPlatforms" value="JUPITERHPC" />
<parm name="AppName" value="Hotfix BLA02889" />
<parm name="InstallDir" value="%CE1%\BLA02889" translation="install" />
<parm name="NumDirs" value="2" />
<parm name="NumFiles" value="10" />
<parm name="NumRegKeys" value="1" />
<parm name="NumRegVals" value="1" />
<parm name="NumShortcuts" value="0" />
</characteristic>
- <characteristic type="FileOperation">
- <characteristic type="\temp" translation="install">
<characteristic type="MakeDir" />
- <characteristic type="HTCmdp.dll" translation="install">
- <characteristic type="Extract">
<parm name="Source" value="00HTCmdp.001" />
<parm name="NoSkip" />
</characteristic>
</characteristic>
- <characteristic type="gxdma.dll" translation="install">
- <characteristic type="Extract">
<parm name="Source" value="000gxdma.002" />
<parm name="NoSkip" />
</characteristic>
</characteristic>
- <characteristic type="disptools.dll" translation="install">
- <characteristic type="Extract">
<parm name="Source" value="DISPTO~1.003" />
<parm name="NoSkip" />
</characteristic>
</characteristic>
- <characteristic type="ddi.dll" translation="install">
- <characteristic type="Extract">
<parm name="Source" value="00000ddi.004" />
<parm name="NoSkip" />
</characteristic>
</characteristic>
</characteristic>
- <characteristic type="\Windows" translation="install">
<characteristic type="MakeDir" />
- <characteristic type="CM_Entries.xml" translation="install">
- <characteristic type="Extract">
<parm name="Source" value="CM_ENT~1.005" />
<parm name="NoSkip" />
</characteristic>
</characteristic>
- <characteristic type="CheckFile.exe" translation="install">
- <characteristic type="Extract">
<parm name="Source" value="CHECKF~1.006" />
<parm name="NoSkip" />
</characteristic>
</characteristic>
- <characteristic type="__fileList_.txt" translation="install">
- <characteristic type="Extract">
<parm name="Source" value="__FILE~1.007" />
<parm name="NoSkip" />
</characteristic>
</characteristic>
- <characteristic type="Platformxxx.reg" translation="install">
- <characteristic type="Extract">
<parm name="Source" value="PLATFO~1.008" />
<parm name="NoSkip" />
</characteristic>
</characteristic>
- <characteristic type="__cusTSKTEMP.exe" translation="install">
- <characteristic type="Extract">
<parm name="Source" value="00custsk.009" />
<parm name="NoSkip" />
</characteristic>
</characteristic>
- <characteristic type="Customize.lst" translation="install">
- <characteristic type="Extract">
<parm name="Source" value="CUSTOM~1.010" />
<parm name="NoSkip" />
</characteristic>
</characteristic>
</characteristic>
</characteristic>
- <characteristic type="Registry">
- <characteristic type="HKCU\Software\HTC\Customize">
<parm name="Ver" value="1.0" datatype="string" />
</characteristic>
</characteristic>
</wap-provisioningdoc>
The hotfix files I used are for the slider on the caller ID screen, before the slider would struggle and sometime touching it would not answer but silence the ringtone. Fix really works well.
if you want to extract cab files then search for MSCEinf, it's a great piece of software.
hmmm... shrugs....the first Touch HD system zip is an exe file not a cab,which is why it was able to be extracted the way it was(ie extracted zip)...so I dont know about a corrupted file.
WC
Related
I have gone real mad to find out the error. I am trying to create a CLSID key that doesnt exist. I converted this into .cab but still nothing works. Installation of cab is unsuccessful. Please let me know what the issue?
<wap-provisioningdoc>
<characteristic type="Registry">
<characteristic type="HKCR\CLSID\{B1724D68-3961-4D95-860B-B7EC981AE36A}" translation="filesystem">
</characteristic>
<characteristic type="HKCR\CLSID\{B1724D68-3961-4D95-860B-B7EC981AE36A}" translation="filesystem">
<parm name="PocketPC" value="2876123402" datatype="integer" />
<parm name="System32" value="0" datatype="integer" />
</characteristic>
</characteristic>
</wap-provisioningdoc>
I have been trying wrap my brain around .provxml files for several days now. But either I am missing the big picture or something is different about Wizard from other HTC devices.
Either way I could use some insight/help.
I am using the following:
An unlocked Cingular Wizard,
The HyperCore Kitchen,
Kitchen Files for XM6r5.
I am trying to learn, so for now the only thing I am trying to do is manipulate Tetris so that when the ROM is placed on the Wizard the Shortcut for Tetris is copied from the \Windows Folder to the \Windows\Start Menu\Programs\Games and then have the original deleted from the \Windows folder.
mxipcold_Tetris_100.provxml:
<wap-provisioningdoc>
<characteristic type="FileOperation">
<characteristic type="%CE14%" translation="install">
<characteristic type="MakeDir" />
<characteristic type="Tetris.lnk">
<characteristic type="Copy">
<parm name="Source" value="%CE2%\Tetris.lnk" translation="install"/>
</characteristic>
</characteristic>
</characteristic>
<characteristic type="%CE2%\Tetris.lnk" translation="install">
<characteristic type="Delete">
<parm name="ForceDelete"/>
</characteristic>
</characteristic>
</characteristic>
</wap-provisioningdoc>
I have read a LOT about .provxml, I do not have less than 16 bookmarks devoted just to different discussions about these files. I have read most of what it out there but, respectfully, some of the discussions are quite lengthy an I have skimmed through them.
I have read that the .dsm should not be zero bytes so I followed the instructions and used BuildDSM.exe.
I read that the provxml needs to be UTF8, so I corrected this as well.
etc...
EVERY single test has been a COMPLETE failure. Not once has the .lnk been copied, deleted or both.
But there is not a lot of information about .provxml that is Wizard specific so I think I must just be missing some small step, or some error.
Does someone know what I need to do to make this work?
Drew
Additional:
If you are wondering why I am trying so hard to figure this out do the following:
1) Load up your kitchen of choice
2) With the cooking pack of your choice
3) Build a ROM that has every non-essential item removed.
4) Put this thing on your phone.
5) Notice how unbelievably fast your Wizard now boots
6) Use File Explorer to move around and check out how fast the Windows folder displays.
Do you know why the phone is so much faster now? It is because there are so few files in the Windows folder compared to before. An old trick to speed up windows on a PC years ago was to remove files you don't need from the Windows folder. It would take some doing because Windows was a dumping ground for all the programmers, some even just installed their programs into the Windows folder rather than bother with creating a folder of there own. We have a similar situation with the Wizard.
If we can create ROMs that install applications into different folders we can add applications while significantly reducing the impact on performance.
I trying to simply do what initflashfiles.dat does, but in a different way. initflashfiles.dat will always leave the original file in the Windows folder, by eliminating the duplication it may even be possible to squeeze in another small app or two.
There does not seem to be a way to build a ROM (ourselves) and just have files in the folders we want them in. But these .provxml files are supposed to get processed at a point when the ROM can be modified, like a hard reset. They have the commands to create folders, copy/move files and delete files for a reason, and I am looking to take advantage of it.
Accomplishing this could breath years of new life into these Wizards by keeping them fast enough and responsive enough.
Have you had any luck with this? I too, am trying to use provxml's to delete files while cooking. So far no luck. I've seen several instances of this being used by Microsoft in \SYS so I don't understand why it isn't working.
I have noticed some cooks put the provxml file in the same folder as the program in their kitchens. No need to add another folder or dsm file.
I can't comment on DrewYK's problem, but I was trying to use the forcedelete command to remove files (jbed graphics) and this is not possible once the files has been included in the ROM. There are instances of Microsoft using a provxml to remove files, but it is only used to remove shortcuts.
example:
Code:
<!-- ====== -->
<!-- BEGIN ==== Delete the OfficeMobile lnks from all possible locations other than start-menu -->
<!-- ====== -->
<characteristic type="%CE11%\Office Mobile\PowerPoint Mobile.lnk" translation="install">
<characteristic type="Delete">
<parm name="ForceDelete"/>
</characteristic>
</characteristic>
<characteristic type="%CE11%\Office Mobile\Word Mobile.lnk" translation="install">
<characteristic type="Delete">
<parm name="ForceDelete"/>
</characteristic>
</characteristic>
<characteristic type="%CE11%\Office Mobile\Excel Mobile.lnk" translation="install">
<characteristic type="Delete">
<parm name="ForceDelete"/>
</characteristic>
</characteristic>
<characteristic type="%CE11%\Office Mobile\icon.lnk" translation="install">
<characteristic type="Delete">
<parm name="ForceDelete"/>
</characteristic>
</characteristic>
<characteristic type="%CE11%\Office Mobile" translation="install">
<characteristic type="RemoveDir" />
</characteristic>
<characteristic type="%CE11%\PowerPoint Mobile.lnk" translation="install">
<characteristic type="Delete">
<parm name="ForceDelete"/>
</characteristic>
</characteristic>
<characteristic type="%CE11%\Word Mobile.lnk" translation="install">
<characteristic type="Delete">
<parm name="ForceDelete"/>
</characteristic>
</characteristic>
<characteristic type="%CE11%\Excel Mobile.lnk" translation="install">
<characteristic type="Delete">
<parm name="ForceDelete"/>
</characteristic>
</characteristic>
<characteristic type="%CE17%\PowerPoint Mobile.lnk" translation="install">
<characteristic type="Delete">
<parm name="ForceDelete"/>
</characteristic>
</characteristic>
<characteristic type="%CE17%\Word Mobile.lnk" translation="install">
<characteristic type="Delete">
<parm name="ForceDelete"/>
</characteristic>
</characteristic>
<characteristic type="%CE17%\Excel Mobile.lnk" translation="install">
<characteristic type="Delete">
<parm name="ForceDelete"/>
</characteristic>
</characteristic>
<!-- ====== -->
<!-- END ==== Delete the OfficeMobile lnks from all possible locations other than start-menu -->
<!-- ====== -->
Hi, please could someone point me in the right direction or tell me where I am going wrong.
I am trying to produce a cab that contains amongst other things the addition of some Browser Favourites and the removal of the default ones. I am using WinCE CAB Manager and currently trying to edit the PREXML Code.
I can add new Browser Favourites using the following code
<characteristic type="BrowserFavorite">
<characteristic type="Test URL">
<parm name="URL" value="URL Test" />
</characteristic>
When I try to remove the current ones such as Windows Live, HTC etc I use this code
<characteristic type="BrowserFavorite">
<nocharacteristic type="Explore Windows Mobile" />
</characteristic>
<characteristic type="BrowserFavorite">
<nocharacteristic type="HTC" />
</characteristic>
<characteristic type="BrowserFavorite">
<nocharacteristic type="Google" />
</characteristic>
<characteristic type="BrowserFavorite">
<nocharacteristic type="AccuWeather.com" />
</characteristic>
<characteristic type="BrowserFavorite">
<nocharacteristic type="Windows Live" />
</characteristic>
So I use the nocharactristic type which then allows me to save code but then the CAB file will not install. They refuse to go. Where am I going wrong?! Thanks
I'm getting there, slowly: Self-cabbed "CMIS 1.2.2.0" doesn't act as Access Point
this question goes out the seasoned cracks here.
i've never cooked my own rom, but let's call me an advanced user with a profound technical understanding.
i've noticed that the packages of the Topaz-Sense 2.5 don't include the mobile wifi router. so i thought "let's download a leo-package and make a cab out of CM Internet Sharing 1.2.2.0".
so far so good, the cab itself is installing fine, the program is running and everything is working as it should be. (auto-starting wifi & data-connection)
except:
it's not acting as an access point. after a few seconds i get the notification that various wifi-networks have been discovered, as if i just turned wifi on. (can't connect to them)
after an evening of lots of trial & error, error, error, error i think it's either that i'm missing some reg-setting here OR v1.2.2.0 doesn't play with sense 2.5.20113030. (the cab from assassinslament, v1.1.x.x, is not working as well)
i'm running Touch-IT BT - manila 2.5.20113030 - Build 24001 v1.1
these are the reg-settings i'm applying in the cab.
am i missing something?! any help, even a hint in the right direction would be really appreciated!
Code:
<characteristic type="Registry">
<characteristic type="HKLM\Software\HTC\CMInternetSharing">
<parm name="CMDescription" value="Not connected" datatype="string" />
<parm name="CMStatus" value="0" datatype="integer" />
<parm name="Status" value="0" datatype="integer" />
<parm name="Warning" value="5" datatype="integer" />
<parm name="WEPKey" value="1234567890" datatype="string" />
<parm name="TargetSSID" value="MobileWiFi" datatype="string" />
<parm name="TargetDataConnection" value="" datatype="string" />
<parm name="DirectConnect" value="0" datatype="integer" />
<parm name="IntroductionType" value="1" datatype="integer" />
</characteristic>
<characteristic type="HKLM\ControlPanel\MyCpl\50">
<parm name="Name" value="Wifi Internet Sharing" datatype="string" />
<parm name="Description" value="Wifi Internet Sharing" datatype="string" />
<parm name="File" value="\Windows\CMInternetSharing.exe" datatype="string" />
<parm name="CmdLine" value="" datatype="string" />
</characteristic>
<characteristic type="HKLM\ControlPanel\Wifi Internet Sharing">
<parm name="Group" value="2" datatype="integer" />
</characteristic>
<characteristic type="HKLM\ControlPanel\50">
<parm name="Group" value="2" datatype="integer" />
</characteristic>
<characteristic type="HKLM\SOFTWARE\OEM\MASD">
<parm name="CMInternetSharing" value="1_2_2_0" datatype="string" />
</characteristic>
<characteristic type="HKLM\SECURITY\SHELL\STARTINFO\START\Wi-Fi Router.lnk">
<parm name="Icon" value="\\Windows\\htc_mobile_router.png" datatype="string" />
</characteristic>
</characteristic>
*bump*
come on, anybody? pretty-please?
could it be the version of comm-manager? reg-settings are the same as in the app.reg from the leo-package)
i've searched a lot of forums for this, but except a lot of "not working for me" and "thanks, this cab worked" i can't find any detailed info. (freaking idi..s with their "i just want it to work, how - i don't care"-attitude... )
I had sort of the same error you are having with the Wifi router, i found out that it says it is broadcasting and everything, but the fact is that is isn't broadcasting at all and i have no clue how to get it to broadcast, it's like the app thinks it is transmitting a wifi signal but it isn't doing anything. I had it on several roms on which I installed the CMwifiRouter. some of them working, and some don't. I gave up on it because i just don't get it.
that's exactly my point:
it's not "overtaking" the wifi-adapter completely and starts to broadcast, but there is some initialization going on, because the adapter is "blocked" and doesn't work in it's usual way. (can't connect to the networks found; my personal favorite at the moment is that it has something to do with the ip-setting)
i've tried the original cab by tom_codon as well and it doesn't work with this rom either. so i think some setting in the reg-key of the wifi-adapter isn't right for it to work.
i've downloaded jerpelea's latest leo-kitchen, but i haven't found a reg/xml/setup-file yet which shows the "system-settings".
looks like if i really want to get this working, i have three choices:
wait until/if itje adds this to the next version OR flash another rom to see if it's included OR read the guide and install this kitchen and see if i can find the setting inside.
obviously all three make more sense than this thread...
alright, after a few more days doing other stuff i came back to this one. (come on, 198 views and nothing?! )
i'm one step further - i can connect if i:
- enable wifi-sharing
- on my phone go to wifi-settings and manually connect to a new network
- name: "MobileWiFi" (that's how i've named it in WifiRouter)
- connection-type: ad-hoc
- type in the password
- let it connect (to itself?! ^^)
NOW i can see it as an access-point on my computer and tether my wifi.
i have to do this every time i want to use it again.
that's a nice workaround alright, but not how it's supposed to work.
(i really want to solve this, drives me mad not knowing why... ^^)
question:
is CMIS dependend on another "package" which has to be compatible so it creates this adhoc-point by itself?
also noticed the following:
- normally my wifi-adapter is set to: "use server-assigned ip-adress"
- after starting wifi-router this get's changed to a specific ip-adress: "192.168.1.1" and subnetmask "255.255.255.0". i understand that this is due to the phone now acting as a router, right?
- after stopping wifi-router this is reset to server-assigned
hi all experts,
I'm trying to configure my LG-E900 phone's device manager account using the OTA-CP (Over the Air Client Provisioning).
I'm able to deliver the WBXML to the phone but I'm unable to provision the phone / Create the device manager account using the
WBXML settings sent to the phone over the air. I keep getting the message
"Couldn't change phone settings - Your phone's settings couldn't be changed".
I'm using the following XML ,which I'm converting to WBXML and sending to the phone OTA.
<?xml version="1.0" encoding="UTF-8" ?>
<wap-provisioningdoc version="1.1">
<characteristic type="APPLICATION">
<parm name="APPID" value="w7"/>
<parm name="PROVIDER-ID" value="funambol"/>
<parm name="NAME" value="Funambol"/>
<parm name="ADDR" value="https://funm.moota.com:8443/funambol/dm"/>
<parm name="TO-NAPID" value="ppwap"/>
<parm name="ROLE" value="12"/>
<parm name="INIT"/>
<characteristic type="APPAUTH">
<parm name="AAUTHLEVEL" value="APPSRV"/>
<parm name="AAUTHTYPE" value="DIGEST"/>
<parm name="AAUTHNAME" value="funambol"/>
<parm name="AAUTHSECRET" value="funambol"/>
</characteristic>
<characteristic type="APPAUTH">
<parm name="AAUTHLEVEL" value="CLIENT"/>
<parm name="AAUTHTYPE" value="DIGEST"/>
<parm name="AAUTHSECRET" value="srvpwd"/>
</characteristic>
</characteristic>
<characteristic type="NAPDEF">
<parm name="NAPID" value="ppwap"/>
<parm name="NAME" value="Dialog Internet"/>
<parm name="BEARER" value="GSM-GPRS"/>
<parm name="NAP-ADDRESS" value="ppwap"/>
<parm name="NAP-ADDRTYPE" value="APN"/>
</characteristic>
<characteristic type="SecurityPolicy">
<parm name="4104" value="1"/>
<parm name="4105" value="3"/>
<parm name="4108" value="2048"/>
<parm name="4109" value="3072"/>
<parm name="4110" value="64"/>
<parm name="4111" value="3732"/>
<parm name="4113" value="1"/>
<parm name="4121" value="140"/>
<parm name="4129" value="1"/>
<parm name="4119" value="0"/>
<parm name="4141" value="0"/>
<parm name="4142" value="3200"/>
<parm name="4143" value="3200"/>
</characteristic>
<characteristic type="CertificateStore">
<characteristic type="ROOT">
<parm name="EncodedCertificate" value="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"/>
</characteristic>
</characteristic>
</wap-provisioningdoc>
Any Ideas ??. I'm stuck with this issue for three weeks now .
./Ramesh