Text Sent Notification - Touch Pro, Fuze Themes and Apps

this thing is driving me crazy! I got the CDMA touch pro, everytime i send a text it always notifies me with that message, i know my mogul used to do that before and my friend downloaded the windows registry and then followed some procedure to take them off but no idea what that was (this was back in the summer)
I tried searching through here but found nothing.
please help!

I believe schap's advanced settings can disable delivery report, plus it gives you many other useful extended tweaks.
try to search it, and it's free

you can also go to Start>Settings>Sounds & Notifications>Message sent notification
uncheck display on screen.
done! without advanced config!

This is what I used to disable the SMS Sent Notification.
[\HKCU\ControlPanel\Notifications\Default]
"Options" = dword:X
X being one of the values listed below (Default on Sprint was 13) Changes take effect immediately. I used 1, didn't mind the audible sound or the little icon showing at the top for a a brief second. If you use 0 you won't get any bubble notice or audible, just a 1-2 second icon in the taskbar that is gone as quickly as it appears.
0 - Icon
1 - Icon and Audio
2 - Icon and Vibrate (SSS)
3 - Icon, Audio and Vibrate (L)
4 - Same as 0
5 - Same as 1
6 - Same as 2
7 - Same as 3
8 - Icon and Bubble
9 - Icon, Bubble and Audio
10 - Icon, Bubble and Vibrate (LLS)
11 - Icon, Bubble, Audio and Vibrate (L)
12 - Bubble
13 - Bubble and Audio
14 - Bubble and Vibrate (SSL)
15 - Bubble, Audio and Vibrate (L)
The following do not reset the keyboard after sending message. What that means is that as you type and the software is doing the word complete, after sending, the word complete dialog still shows on the screen for the last word typed.
16 - Icon and No KB Reset
17 - Icon, Audio and No KB Reset
18 - Icon, Vibrate (SSS) and No KB Reset
19 - Icon, Audio, Vibrate (L) and No KB Reset
20 - Same as 16
I stopped trying values when I got to 20 since from 16 on they appeared to be the same as 0-15 but with the KB issue I mention above. Also, all the S's and L's represent quantity and length of the vibrations. I tried each setting about 10 times and 3 of the 10, the last vibe was opposite of what I show. In most cases though, it did as I show above.
After I found these, I did a search and found that a few others had found and posted the above as well. So I wasn't the first, but I did find it on my own.
That and what I covered in this thread should get you covered.
Also, you can check the following thread which has a different method for customizing the individual notifications for everything. http://forum.xda-developers.com/showthread.php?t=460368

djsikhbeatsz said:
you can also go to Start>Settings>Sounds & Notifications>Message sent notification
uncheck display on screen.
done! without advanced config!
Click to expand...
Click to collapse
I tried that on my phone and could not find Message Sent Notification. Any screen shots?

equinox2355 said:
I tried that on my phone and could not find Message Sent Notification. Any screen shots?
Click to expand...
Click to collapse
it's not there, he is thinking text received, not text sent. Anyways download Diamond tweak or Advanced config, scroll down on either to messages, and then click text sent confirmation "disable" it's very simple.
Just search the forum for either file the cabs are floating all around the place. I would use advanced config instead of registry edits.

Here's the link and thread to the Advanced Config Tool Mentioned
http://www.touchxperience.com/
http://forum.xda-developers.com/showthread.php?t=418151

My experience with Advanced Config is that it's not very CDMA friendly. It was originally written based on GSM phones and makes assumptions.
Not to steer the thread in the wrong direction but has that changed?

NosetnSMS CAB here!
Here you go, this solves the issue, just place it on your phone and install it

diamond tweak worked well for me

HKLM\Software\Microsoft\Inbox\Settings\SMSNoSentMsg=1 (its 0 by default) this will stop the message pop up box from popping up. should work right after you save but you may need a soft reset..

thanks! that advanced config didn't work (said i needed an updated microsoft net frame) but installed the 1kb nosms file and that worked like a charm, thanks!

Related

Removing system status dialog/touchflow 3d interface?

hi all!
just got myself a diamond yesterday after spending 8 months with a n95 8gb... overall impressive phone but coming from a dopod d810, i find the system status dialog/touchflow 3d interface extremely annoying!
how do i remove them???
system status dialog -> where you can click on the volume, date, 3G icons on the top right hand side of the phone
also anybody knows how to remove the functionality where you press the vol up/down and it changes the system volume?
Hard Reset the daimond. When it boots up after configuration and when it says 3 seconds to customize , press reset.
PS : Opera also wont be installed. you can download opera cab seperately
If it's just the interface, why not uncheck it from Settings>Today ? Or does it come back? Not tried it yet myself
jeRrRKKKK said:
system status dialog -> where you can click on the volume, date, 3G icons on the top right hand side of the phone
Click to expand...
Click to collapse
start->preferences->system->TouchFLo
unselect third checkbox..
Allright .. that´t the way to disable TouchFlo...
but how can we get rid of the system status dialog?
(another way than soft reset before HTC customizing runs...)
thx alot...
one more here that is really seeking to get rid of that awfull system status.....
thats the only thing so far i really hated on the diamond
Doesn't my solution (3 posts up from here) work to disable the system status dialog window?
It works for me (MDA Compact IV -Dutch)
yes it works real fine, the problem is everyone still wants the touchflow 3d
we just want to get rid of the system status on the upper corner
Guys..
instead of the full screen system status, do U think I can get the original Touch/Cruise system bubble instead? It's similar to the full screen, but the icons are slightly bigger and appears on top of the screen in a bubble.
Any ideas?
I also find the system status page an unnecessary step. Coming from an Imate K-jam, I preffered just pressing on the icon at the top (alarm bell / envelope / handset etc) to take me to the pop-up bubble at the bottom of the screen where I could either enter open the inbox / call register/calender etc or dismiss.
I read somewhere that the system status page is to bring up large icons for finger pressing. I don't understand the logic of this as the only way I bring up the system status page is by pressing on a small icon in the title bar!
I would like to be able to remove this system status screen step
Why does everone ignores the answer already given??
* To disable the Systemstatus screen, go to Settings>System>Touchflo
* untick the third checkbox wich states (translated from Dutch): "Show Systemstatuswindow when ticked on statusicons"
wheelo said:
...I read somewhere that the system status page is to bring up large icons for finger pressing. I don't understand the logic of this as the only way I bring up the system status page is by pressing on a small icon in the title bar!...
Click to expand...
Click to collapse
The idea is that you don't have to aim so precise, just press anywhere near the icons and then you can take your pick by pressing an easy target.
Anyway I do agree with you that it is an annoying extra step, it is a good thing it can be disabled (see previous post).
hi
any idea why my elf does not have 3 options but only 1 "enable sound when finger scrolling and panning"
Is there any workaround to turn off the touchflow?
maybe it's because I was flashed the rom to an "original orange" version?
thanks
tshuma said:
hi
any idea why my elf does not have 3 options but only 1 "enable sound when finger scrolling and panning"
Is there any workaround to turn off the touchflow?
maybe it's because I was flashed the rom to an "original orange" version?
thanks
Click to expand...
Click to collapse
Same here, but I found this registry key that helped me (i really hate the big system status menu!) :
HKEY_LOCAL_MACHINE\Software\HTC\EnlargeTitleBar\Enable which must be 0 to disable it! You don't even need to reboot, works instant!
Ever since I updated the ROM, I really hate that big system status screen.
I thought I would have had to live with it, so I am very glad to found this thread.
Thanks guys!!!
rondol1 said:
Why does everone ignores the answer already given??
* To disable the Systemstatus screen, go to Settings>System>Touchflo
* untick the third checkbox wich states (translated from Dutch): "Show Systemstatuswindow when ticked on statusicons"
Click to expand...
Click to collapse
LoL,
I read your first message and BAM! It worked!!! (last of 3 check boxes)
THANNNNNNNNNNNNNNNK UUUUUUUUUU
(I have a cooked rom for my Tilt/Kaiser)
Start|Settings|System|Touchflo| uncheck "Show System Status screen when status icons are tapped"
Start|Settings|Personal|Today|Items| uncheck "TouchFLO 3D"
Settings > System > Touchflo > untick Show system status....
EDIT: oops, didn't see the 2nd page.
i need help :/
sorry this doesnt really relate to the other posts i dont know how to post a message on my on. (just registered today)
But does anyone know how to change the clock on the title bar on the top of the HTC Touch Pro from a clock icon to the normal digital clock. i somehow changed it while on the phone and i just CANT figure out how to change it back.
If anyone can please help me i would reallyyyy appreciate it!

Request for testing Band Switching of CommMgrPro in Diamond[UPDATED 2008-09-12]

Hi.
I am solving the issues of CommMgrPro with Diamond. The most important were.
1) CMP didnt change the band correctly (2G <-> Auto <-> 3G)
2) CMP didnt set correctly the speaker volume.
Any help to see if those issues are gone in this version will be wellcome with free licenses
Version V2.2(2008-09-12)
1) There are towers on each country with same cell id. So now the primary key for Cell Mode will be CellID + LAC. CMP will convert your database so make a backup before and will fill the lac information each time it finds a cell with lac equals 0
2) Compatibility with HTC Touch Diamond and HTC Touch Pro (Fixed Band manager, speaker manager, GPS manager and some GUI changes).
3) New option to repair the database.
4) New page for connections option (In connections/menu/options)
5) Option to disable/enable connections on roaming
6) Option to CMP startup delayed on page Options 3.
7) Option to Show/Hide the main window after start CMP.
8) Clicking on the higher part of the battery bar opens the battery page
9) Clicking on the lower part of the battery bar opens the battery page
10) Hide button is raplaced by calendar button.
11) New Today tab. This dialog lets you see the next events that will happen in the place, including calendar events, "Always on" schedules and other events (time limits, etc)
Hello Daniel,
1) I can confirm that the band changes work correctly, 2G, 3G and Auto - including timed changes
2) I had my ring and system volume set to 40%, chose the Full Sound profile, but both levels stayed at 40%. Then went back to the Unknown profile, both volumes still at 40%. The Silent profile, however, did set both volumes correctly to 0%. On exit (back to Unknown), ring volume was set to 40% (what I started with) and system was set to 62% (I had 40%).
Does this answer your questions?
-rune
runewa said:
Hello Daniel,
1) I can confirm that the band changes work correctly, 2G, 3G and Auto - including timed changes
2) I had my ring and system volume set to 40%, chose the Full Sound profile, but both levels stayed at 40%. Then went back to the Unknown profile, both volumes still at 40%. The Silent profile, however, did set both volumes correctly to 0%. On exit (back to Unknown), ring volume was set to 40% (what I started with) and system was set to 62% (I had 40%).
Does this answer your questions?
-rune
Click to expand...
Click to collapse
Ok, but dont use full sound profile. Instead use directly the speaker button of the main screen...
Attached latest beta....
You attached the QVGA version, the VGA version is needed for the Diamond, right?
Anyway, I tested with the 2.2b7 version you posted in this thread http://forum.xda-developers.com/showpost.php?p=2597701&postcount=1955, and changing to Silent and Vibrate (and back to Normal) all work ok (original volume settings restored), but setting the different volumes i % does not work at all, they remain at my previous settings - both ring and system.
-rune
runewa said:
You attached the QVGA version, the VGA version is needed for the Diamond, right?
Anyway, I tested with the 2.2b7 version you posted in this thread http://forum.xda-developers.com/showpost.php?p=2597701&postcount=1955, and changing to Silent and Vibrate (and back to Normal) all work ok (original volume settings restored), but setting the different volumes i % does not work at all, they remain at my previous settings - both ring and system.
-rune
Click to expand...
Click to collapse
hehe, yes, its qvga, sorry.
So change system volume (ring volume isnt controlled) to 20%, 40% doesnt work in diamond, isnt it?, Its a pitty because It works on touch pro (and many devices). So there is one more difference between diamond and pro: the speaker management¡¡. I will try to get a diamond to test.
Thanks ¡
Just did another test (system at 20%), and none of the %-buttons change the volume at all. Vibrate and Silent/off both work, and the previous setting (20%) is restored after changing back to normal.
Just let me know when you have a new version ready and I'll retest this. Maybe some other Diamond owner can test this as well?
runewa said:
Just did another test (system at 20%), and none of the %-buttons change the volume at all. Vibrate and Silent/off both work, and the previous setting (20%) is restored after changing back to normal.
Just let me know when you have a new version ready and I'll retest this. Maybe some other Diamond owner can test this as well?
Click to expand...
Click to collapse
Yes, It would be nice if other users could check this issue. Its strange because all the Touch Pro users hasnt that issue and "theorically" both devices are the same....
The test is easy.
1) Click on speaker button, choose ON, choose No time limit, select 80%. Then click on the upper speaker system icon to check if the level is really at 80% (more or less).
2) Same with 20% or 40%...
Greetings.
Dani
Just followed you steps in the previous post, and what I did discover in my previous testing is a bug in Manila, not in CommMgrPro
I checked the system volume using the Settings/Sounds tab and then system volume, and it always remained at 20%. But after tapping the volume icon at the top (which was set correctly) and then checking the system volume using Settings/Sounds tab, the volume was set ok here as well.
So, to sum up, CommMgrPro does indeed set the system volume correctly on the Diamond!
runewa said:
Just followed you steps in the previous post, and what I did discover in my previous testing is a bug in Manila, not in CommMgrPro
I checked the system volume using the Settings/Sounds tab and then system volume, and it always remained at 20%. But after tapping the volume icon at the top (which was set correctly) and then checking the system volume using Settings/Sounds tab, the volume was set ok here as well.
So, to sum up, CommMgrPro does indeed set the system volume correctly on the Diamond!
Click to expand...
Click to collapse
Great news¡¡.
Thank you very much runewa
Dani
il try it out on my diamond later on thx!!
Hi Dani,
So I've fiddled around with CommMgrPro for a few days and I’ve found a few bugs and even more requests for new functionality Here goes:
1) Ring volume not restored/set after profile ends (system volume is set ok)
2) Ring type “Ring” is not set correctly using the profiles, ring type “Other” is displayed. All the other ring types work ok.
3) Battery graph stops updating after a while, typically if let to run > 24 hrs. I have set a battery file of 100KB and refresh every 60 seconds
4) The application crashes a lot of the times, especially when playing around with the profiles. I have CommMgrPro installed in the ROM. I’m going to flash to a cooked ROM on a short time, I’ll install CommMgrPro as the first application, just to see if it’s the application itself or other programs that interfere
Over to the wish list
5) Should overwrite battery file when limit is reached
6) Detect if connected via activesync (pr sync partnership) and be able to set (profile)actions accordingly
7) Set how often, and when, activesync checks for mail pr profile
8) Set “Turn On/Off BT on incoming call” pr profile. Let the current “Turn On/Off BT on incoming call” on the Options2 page be an override profile settings option
9) “Intelligent cell mode” – associate all cells to the current profile. Great for recording cells to my “Work” profile, for example
10) Switch band using command line (just as BandSwitch) – maybe this is implemented already?
11) Switch profile using command line – so I can change profiles using programmable HW buttons ( I use AE Buttons Plus)
12) Programmable HW buttons
13) Change SMS, mail and reminder alerts – I would love to be able to turn on /off Vibrate for SMS-, email- and all the other configurable notifications the Diamond offer using the different profiles
14) Able to delete a profile action
15) Detect if the phone is laying on a flat surface or not, and set actions accordingly. This is my favorite I either have my phone laying on a flat surface or it’s in my hand while walking, or in the pocket of my pants – either while walking or sitting down. When I’m out walking I always use the Vibrate mode, but quickly change to normal Ring mode when I’m at the office/at home. What I would LOVE to see is for CommMgrPro to be able to detect if my phone is laying on a flat surface (+- x% which can be configured in the an Options page) or not. If you add an enter/exit “Tilted” / “Not tilted” mode somewhere, I can set my phone to vibrate when tilted (in my hand / pocket) and then switch automatically back to Normal ring mode when it’s laying flat on my desk. This of course applies to the ring mode, SMS-, email- and reminders notifications as well.
This turned out to be quite a list, but I hope you believe this will make the CommMgrPro an even more powerful application.
Enjoy your weekend!
-rune
wow rune. Good work¡¡
I take note about all this things. Most of them are very interesting and will be implemented. Only one question...
Crashes werent reported by users months ago and I didnt see it on my Touch Pro, so, when It happens again please send me a email ([email protected]) telling me what were you doing (which dialog, etc) and what kind of crash exactly. It will help me to simulate the situation and see what happens exactly.
Thanks again....
Hi.
I need to create a new release version to satisfy HTC dimaond/touch pro users because last official version didnt work corretly. So this version (2.2b9) will become Official 2.2 if no one reports a bug.
Version V2.2(2008-xx-xx)
1) There are towers on each country with same cell id. So now the primary key for Cell Mode will be CellID + LAC. CMP will convert your database so make a backup before and will fill the lac information each time it finds a cell with lac equals 0
2) Compatibility with HTC Touch Diamond and HTC Touch Pro (Fixed Band manager, speaker manager, GPS manager and some GUI changes).
3) New option to repair the database.
4) New page for connections option (In connections/menu/options)
5) Option to disable/enable connections on roaming
6) Option to CMP startup delayed on page Options 3.
7) Option to Show/Hide the main window after start CMP.
8) Clicking on the higher part of the battery bar opens the battery page
9) Clicking on the lower part of the battery bar opens the battery page
10) Hide button is raplaced by calendar button.
11) New Today tab. This dialog lets you see the next events that will happen in the place, including calendar events, "Always on" schedules and other events (time limits, etc).
Greetings.
Dani
Hi.
V2.2 ready.
Details and download on first post.
Hi.
A new beta is ready.
Version V2.3(2008-xx-xx)
1) Skin engine improvements.
2) Bug fixing related with phone-off action.
3) Better integration between CMP and HTC Touch Diamond/Pro. Current profile-schedule is shown in the main TouchFlo3D tab (Thanks to NLS). User can disable it on Options 3. See pictures
4) CMP is autorestarted automatically if other program kills it to avoid HTC task manager closes accidentally it. To close CMP just use menu/exit
5) Support for Samsung Omnia (240x400 devices).
Please send any bug, suggestion, etc. The new diamond skin will be ready very soon and It wil reduce the memory consuption in 50-70%.
Regards
Dani
Hi.
V2.3 out.
See official (Hermes) forum for details
http://forum.xda-developers.com/showthread.php?t=299070

Notification Manager - Screen settings ?

I have a problem that my phone pops up notifications - but they are blank.
The phone is a Kaiser/TyTnII ( Used to be Vodafone 1615 )
I am pretty sure that this phone has been flashed with one of the XDA ROMs as i have just done a hard reset and i still have touchFlo and a bunch of other non standard looking utilities on the phone.
The about box for TouchFlo says version 1.0 ( Build 1818.3719 ) which i am pretty sure having read all about the touchflo project for the Kaiser on the XDA developers is a version created here.
So now that i have given some background, back to the problem... pretty much everything on the phone seems to work ok. But the really annoying bug is this notification pop up.
eg. Set a calendar appointment for a few minutes in the future, set a reminder.
.... few minutes passes ... notification pops up
whole screen dims and at the bottom i get the soft buttons of "dismiss" and "menu"
No actual message is displayed on the screen.
Now i flip to landscape mode, and i can see the top left hand corner of a pop up message - the rest dissapears off the screen.
So, what have i done so far to help myself ?
1) searched these forums for somebody having the same problem/question X
2) tried some registry tweaks for specifying what message should pop up X
3) renaming the notification manager.dll X
4) looking at all the notification *.png screen images in the /windows/
folder and confirming that they are correctly set for the QVGA screen size. X
5) tried downloading the notification manager.cab for the rhodium - elsewhere on the XDA site. - would not install
6) hard reset the phone.
I dont actually want the touchflo as i prefer the spb mobile shell. What options do i have ?
Do i need to just apply the correct registry tweaks and all will be well ?
Do i download a new notification manager from somewhere that will fix this?
Do i have to re-flash the phone ? ( least attractive option to me )
Can i somehow uninstall the notification manager and go back to a windows
default version ?
thanks, you_were_lucky
Notification Manager - pop up window size ?
So some developments since my post yesterday, I tried some registry tweaks to change the font sizes.
I notice that if i tap the title bar ( next to the wifi icon) i get the notification manager screen up - this has all the correctly sized and formatted .png images and functions correctly.
It is the pop up that appears due to a calendar reminder or a wireless network found etc. that is all wrong
When i go into landscape i can see the edge of this and even click on the wireless network found radio buttons etc.
So i figure that maybe the pop up window sizes are all wrong due to some mad font size someplace. I went into the registry and tried changing font sizes down from 800 to 12 and this did indeed change the size of most fonts kicking arround the place. Unfortunately it did not influence the size of the pop up box.
Any ideas people ?
thanks YWL

Flashing LED for Missed Call

Greetings All,
I've been reading and using tweaks from XDA for a while now, and after tinkering with Windows Phone I think I've finally found something i can contribute.
I've managed to get my HTC HD7 to give a Flashing Green LED for a missed call using old Windows Mobile 5 tricks.
By navigating to:
HKCU\ControlPanel\Sounds\RingTone0\
Adding a string value called:
Script
And giving it the values:
av2pf300
To break this down it does the following:
a = Activate Phone
v2 = Vibrate for 2 seconds
p = Play Ringtone
f300 = Flashing LED for missed call for 5 minutes
These are the values that i've chosen for myself. It makes the phone vibrate for 2 seconds before the ringtone kicks in.
I haven't found a way to keep the phone vibrating while it is also ringing, but I find having the flashing LED more of a benefit to me as I'm constantly in and out of my office.
The script value is fully customizable, and more values can be found here:
http://forum.xda-developers.com/archive/index.php/t-270040.html
I hope other people find this as useful as I have.
Estens.
have you attempted this with sms or email? neither of the two are supported with led notification by default but maybe a script can force that. Also, is there a way you can control the color of the led? thanks for your contribution!
SMS and email were handled differently by Windows Mobile 5 & 6.
You would go to HKEY_CURRENT_USER\ControlPanel\Notifications\Default\Options and set the default value to one of the following:
* 0 – Show icon
* 1 – Show icon and play notification sound
* 2 – Show icon and vibration
* 3 – Show icon and vibration and play notification sound
* 4 – Same as 0
* 5 – Same as 1
* 6 – Same as 3
* 7 – Same as 3
* 8 – Show icon and notification bubble
* 9 – Show icon and play notification sound and show notification bubble
* 10 – Show icon and notification bubble and vibration
* 11 – Show icon and play notification sound and show notification bubble and vibration
* 13 – Same as 1
This functionality appears to have changed in Windows Phone 7. I have tried both the above method and the Script method that i used for the Ringtone, but neither have worked.
As for changing the Colour of the LED, I wouldn't know where to begin. All I'm doing is telling the system that i want the LED to flash, not to flash green.
It may be possible, and i'll start to look into it now that someone has requested it - I assume that because the low-battery LED warning is Orange it is possible to change it, but that could be a hardware specific factor -- no idea.
Thanks for the reply. Any progress you can come up with would be great.
Doesn't it do this anyway - mine does except the flashing light is orange not green.
It would be a really good option to have it for SMS as well though
I can't see ...\RingTone0\... Please help me! Thanks!
jacky1507 said:
I can't see ...\RingTone0\... Please help me! Thanks!
Click to expand...
Click to collapse
First, are you using a HTC HD7? This is the only Windows Phone device I currently have access to so i am unsure if this will work with other devices (although the registry shouldn't change that much between devices.)
Second, are you sure your in the correct registry hive? i.e. you need to be in HKCU, not HKLM. There is a ControlPanel sub-key in both of these hives, so if your missing some keys i'd just ask you to confirm that your looking in the right place.
If the above does not work I'm not really sure how to progress... this key has been in Windows Mobile since 5.0 (as far as I know), and it's managed to find it's way into the Registry of my Windows Phone 7 HTD HD7 so I'm not sure why it's not there for you.
In regards to the SMS/Email flashing notification - I've tried a few methods of tinkering but still haven't been able.
Will keep you all posted.
Estens.
estens said:
First, are you using a HTC HD7? This is the only Windows Phone device I currently have access to so i am unsure if this will work with other devices (although the registry shouldn't change that much between devices.)
Second, are you sure your in the correct registry hive? i.e. you need to be in HKCU, not HKLM. There is a ControlPanel sub-key in both of these hives, so if your missing some keys i'd just ask you to confirm that your looking in the right place.
If the above does not work I'm not really sure how to progress... this key has been in Windows Mobile since 5.0 (as far as I know), and it's managed to find it's way into the Registry of my Windows Phone 7 HTD HD7 so I'm not sure why it's not there for you.
In regards to the SMS/Email flashing notification - I've tried a few methods of tinkering but still haven't been able.
Will keep you all posted.
Estens.
Click to expand...
Click to collapse
Dear Estens,
I'm using HTC HD7 Nodo, but I haven't yet change the ringtones anymore. Is it the reason like this?
I upload the picture about this problem. Please check it and help me. Thanks!
I can see your problem straight away. Your trying to modify the registry on your desktop.
This modification is for the device, (i.e. your mobile phone).
Making changes to the registry on your desktop PC will only affect things on your desktop PC, and changing the registry on your device will only affect your device.
The HKCU\ControlPanel\Sounds\RingTone0\ registry is on your device so you'll have to dev-unlock your device, install a registry editor and modify it that way.
Estens
estens said:
I can see your problem straight away. Your trying to modify the registry on your desktop.
This modification is for the device, (i.e. your mobile phone).
Making changes to the registry on your desktop PC will only affect things on your desktop PC, and changing the registry on your device will only affect your device.
The HKCU\ControlPanel\Sounds\RingTone0\ registry is on your device so you'll have to dev-unlock your device, install a registry editor and modify it that way.
Estens
Click to expand...
Click to collapse
I know. Thanks for your help!
estens said:
Greetings All,
I've been reading and using tweaks from XDA for a while now, and after tinkering with Windows Phone I think I've finally found something i can contribute.
I've managed to get my HTC HD7 to give a Flashing Green LED for a missed call using old Windows Mobile 5 tricks.
By navigating to:
HKCU\ControlPanel\Sounds\RingTone0\
Adding a string value called:
Script
And giving it the values:
av2pf300
To break this down it does the following:
a = Activate Phone
v2 = Vibrate for 2 seconds
p = Play Ringtone
f300 = Flashing LED for missed call for 5 minutes
These are the values that i've chosen for myself. It makes the phone vibrate for 2 seconds before the ringtone kicks in.
I haven't found a way to keep the phone vibrating while it is also ringing, but I find having the flashing LED more of a benefit to me as I'm constantly in and out of my office.
The script value is fully customizable, and more values can be found here:
http://forum.xda-developers.com/archive/index.php/t-270040.html
I hope other people find this as useful as I have.
Estens.
Click to expand...
Click to collapse
----------------------------------------------------------
Cool... more neat sh** to play with... thanks man!... ... knew that touchXplorer was going to come in handy pretty quick!!...
Quick note on Mango Beta 2.
It appears that if you have this trick in place before you begin the Mango Update it will persist after the update is complete. So be sure to apply this before you update to the Mango beta if you want your flashing LED for a missed call.

Has anybody solved notifications issue on Mate 20 Pro?

Hi everyone. Can anybody post a screenshot of your homescreen with received emails / messages icons showing in the top left corner of the Mate 20 Pro screen (notifications area) please? I'm sick and tired to hear explanations like "hm, weird. might something wrong with your firmware", hm, I've got everything". Something is telling me that this problem is notch related and Huawei simply don't know how to fix it. Thanks in advance.
What problem do you have?
WarVic said:
Hi everyone. Can anybody post a screenshot of your homescreen with received emails / messages icons showing in the top left corner of the Mate 20 Pro screen (notifications area) please? I'm sick and tired to hear explanations like "hm, weird. might something wrong with your firmware", hm, I've got everything". Something is telling me that this problem is notch related and Huawei simply don't know how to fix it. Thanks in advance.
Click to expand...
Click to collapse
Like this
hija31 said:
Like this
Click to expand...
Click to collapse
Okay, I want my phone showing notification icons like in your second screenshot with received emails icons. To other screenshots are the result of action like swipe down gesture. How did you get emails icon there?
gm007 said:
What problem do you have?
Click to expand...
Click to collapse
No notification icons (emails, messages...) in the top left corner. All I have got is operator name and signal strength (GSM + WiFi) signs. That's it. As a result, I'm missing important messages and emails, not reading them in time. Never experienced anything like this on Pixel, Galaxies, LG, HTC and Sony phones. Also my previous phone - Mate 10 - didn't have this problem too. Can't find the way to fix it on Mate 20 Pro.
Maybe you have disabled them by mistake,you can always go to app setting and enable notifications for each app you want.
It's a horrible notch on this phone.
I'd much rather that if the option to turn "off" the notch is selected, that the whole top line would be moved down so that icons show in an entire row the line below, instead of the very top notched line, but such is life!
For you, is this a space issue do you think?
I've changed the option to show a notification number instead of individual icons. At least with this method, you'll know something is there?
.
You have the place for only 4 icons at the right and at the left of the notch. So that depends if you have Bluetooth on, network monitor on etc... Etc.. For each apps you have maybe in notification bar you should disable apps that you don't want to be in notif bar. For exemple I use Tasker but don't need it in notification bar, so I removed is icon in notification menu.
Like you I don't see my email or text msg notification icon but is because I've Bluetooth on, alarm on, vibrate On and data monitoring on so... Alarm icon don't appear coz I've also signal strength.
Signal strength + Bluetooth icon + network monitor + vibrate mode = 4 icons nothing more. If I switch from vibrate mod to ring mod i' ve again one free slot for another icon etc... Etc..
gm007 said:
Maybe you have disabled them by mistake,you can always go to app setting and enable notifications for each app you want.
Click to expand...
Click to collapse
I haven't touched or disabled anything. Everything is on default settings. I've checked all notifications related settings, everything is enabled.
hawkerpaul said:
It's a horrible notch on this phone.
I'd much rather that if the option to turn "off" the notch is selected, that the whole top line would be moved down so that icons show in an entire row the line below, instead of the very top notched line, but such is life!
For you, is this a space issue do you think?
I've changed the option to show a notification number instead of individual icons. At least with this method, you'll know something is there?
.
Click to expand...
Click to collapse
Yes, this is a space issue and a Huawei issues at the same time. I set "show numbers" options but still no luck. Maybe my current operator name is too long to have anything else beside.
ilos said:
You have the place for only 4 icons at the right and at the left of the notch. So that depends if you have Bluetooth on, network monitor on etc... Etc.. For each apps you have maybe in notification bar you should disable apps that you don't want to be in notif bar. For exemple I use Tasker but don't need it in notification bar, so I removed is icon in notification menu.
Like you I don't see my email or text msg notification icon but is because I've Bluetooth on, alarm on, vibrate On and data monitoring on so... Alarm icon don't appear coz I've also signal strength.
Signal strength + Bluetooth icon + network monitor + vibrate mode = 4 icons nothing more. If I switch from vibrate mod to ring mod i' ve again one free slot for another icon etc... Etc..
Click to expand...
Click to collapse
Okay, thanks for explanation. Thant's mean it is space + Huawei issue indeed. Useless (no notifications whatsoever) AOD is quite frustrating as well.
WarVic said:
Yes, this is a space issue and a Huawei issues at the same time. I set "show numbers" options but still no luck. Maybe my current operator name is too long to have anything else beside.
Click to expand...
Click to collapse
Turn of ur operator name in the settings
WarVic said:
Yes, this is a space issue and a Huawei issues at the same time. I set "show numbers" options but still no luck. Maybe my current operator name is too long to have anything else beside.
Click to expand...
Click to collapse
Have you tried unticking the display carrier name option in the display settings?
Edit:
Ahh, this only affects the home screen and not the lockscreen. Never mind
There is room for 5 icons and not 4. The last three ones are replaced by new icon.
I think you've changed something in settings that's why you're not getting notifications.
If you look at second screen shot, you can see that sms icon in the first photo is replaced with keyboard icon and on the third it's back again.
hija31 said:
There is room for 5 icons and not 4. The last three ones are replaced by new icon.
I think you've changed something in settings that's why you're not getting notifications.
If you look at second screen shot, you can see that sms icon in the first photo is replaced with keyboard icon and on the third it's back again.
Click to expand...
Click to collapse
Okay, I see. Seriously, I haven't touch any settings, all in defaults state. Just tried to disable providers name and finally notification popped up! Anyway, notch is the culprit of my issue. I takes heaps of space so with provider name displayed by default there is no space for anything else. Can't justify such a huge notch and having below the average sound from the speakers. My old small Pixel 3 sounds a way clearer and louder even not at high volume. Don't really care about secure and fancy 3D face recognition at all.
WarVic said:
...Can't justify such a huge notch and having below the average sound from the speakers. My old small Pixel 3 sounds a way clearer and louder even not at high volume. Don't really care about secure and fancy 3D face recognition at all.
Click to expand...
Click to collapse
Then you bought the wrong handset. The notch is there for a reason. I love the 3d face recognition, so I live with the notch. I bought the right phone.
You can also use adb to permanently disable some of the system icons like Bluetooth, alarm clock, nfc, etc.. This really helped clean things up and made more room up top for notification icons.
One option I wish they had was the ability to move signal and WiFi from left to right.
Sent from my LYA-L0C using Tapatalk
Total is 8 icons....4 at left and 4 at right or 5 at left 3 at right etc... If you choose to put battery % out of his icon you will see... Battery icon take 2 places, % take one, time take one = 4
If you put battery % inside his icon : battery icon take 2 places, time take one = 3, so you have automatically 5 slots available at left... [emoji57]
Sent from my LYA-L29 using Tapatalk
ilos said:
Total is 8 icons....4 at left and 4 at right or 5 at left 3 at right etc... If you choose to put battery % out of his icon you will see... Battery icon take 2 places, % take one, time take one = 4
If you put battery % inside his icon : battery icon take 2 places, time take one = 3, so you have automatically have 5 slots available at left... [emoji57]
Sent from my LYA-L29 using Tapatalk
Click to expand...
Click to collapse
You're right :good:

Categories

Resources