Related
I have a 9090 bought in Dubai. I am now getting a bluetooth expired message and the imate help desk told me that I must get a ROM upgrade from the Qtek suppliers. Problem is that they all give a country error. Is there a patch for the bluetooth expiry problem? Is there a ROM upgrade that is open for all Qtek 9090s? thanks Bill
You may just try the BT upgrade to 3900 (file on FTP server) or try to correct the Country error with GetDeviceData.exe also on the FTP site plus the instructions of the other thread about upgrading QTEK
Joao Caldeira
Sorry, but the 3900 does not seem to work (at least out of the box)
Just tried it and started to receive that message.
Joao Caldeira
Someone has posted the attached file and said that it can fix BT license expired error. I have not tried it myself, so use it on your own risk.
To use it - extract archive to your PocketPC and run EXE file.
Thanks.
I'll try it as soon as I have my cradle.
Joao Caldeira
Hi.
No more License expired message, but I'm not being able to pair with my BT Headset HBH-660.
Maybe I'm doing somethiing wrong... I'll check it out...
Thanks,
Joao Caldeira
OK.
Paired the device. When trying to "connect" the QTEK showed failes.
Turn BT off and on and everything is working.
THANKS
Joao Caldeira
BT_key
I copied the two extracted files over to myQtek 9090 and opened the exe file. A list of BT addresses came up and a write key icon. When I try to select a BT address and write it, I get the following message: ResetMFG(). DeviceIoControl(). FL_IOCTL_BDK_OPERATION fail!
Am I doing something wrong - I copied the files into my documents on the 9090 and ran the exe file through file explorer on the Qtek.
Thanks,
Bill
BT_Key
Thanks. This solved my problem.
I was getting this message everytime I turned bluetooth on:
Sorry! Bluetooth can no longer be used because the license has expired.
BDA: 00:00:00:00:00:00
Key:
E3E534E19B3E8214C543A
73C0A8B9A9074DD3B175
3515CD8
For some reason after a System ROM upgrade, my bluetooth device showed what it looks like a mac address as 00:00:00:00:00:00. This tool fixed the problem.
For anyone that is running into the Bluetooth License problem please try this.
DJ
Yes it does.Seems after upgrade BT have no mac adress so this "thingie" writes it down in some register.Any way done job for me.
Damn.. same thing happened to me today (
Reset time\soft reset not work
the fix when i launch i get "ResetMFG(). DeviceIoControl(). FL_IOCTL_BDK_OPERATION fail! " too..
Is there another way to set up a mac address? :O
Chooo
Upgraded to 3900... still 00:00... BDA and that fix program doesn't work!
Chooo
well in WM2003 rom they use old versions of the Bt stack thats why it shows license error
Ok.. but.. it's normal as answer? ^_^;;;
No mistaken.. thx for let me know this.. but danguard is already dead here in italy.. how the hell can i fix? I dont want to install a wm5, there isn't a way in registry to rewrite BT?
Chooo
The BT update worked for me.
FYI
I have tested 3900 and now 3500... nothing..
i want to try other stack,like this : OEM_WWE_160_600.sa.CAB
but.. how can i delete used file "audioGW.dll"?
Chooo
mamaich said:
Someone has posted the attached file and said that it can fix BT license expired error. I have not tried it myself, so use it on your own risk.
To use it - extract archive to your PocketPC and run EXE file.
Click to expand...
Click to collapse
I just want to give a short feedback.
I was experiencing the license-problem since a ROM-Update failed and my extended ROM was deleted. After hours of resaerch I finally found your post and I have to thank you very much! With this small file now everithing seems to work as it should again!
I can only recommend it to everyone with the same problem!
Greetz from Germany!
Hi,
Does anybody know these settings for the xda mini s?
Really need them!
Thanks.
You need the .cab file (Operator settings)
club i-mate has all operator settings in .cab format (copy to memory card and run it!).
But if you don't have access to their site, either search these forums for a .cab file (Orange operator settings) or contact Orange themselves (whilst they may be reluctant at first, their technical support guys will guide you through the settings or send them to you in txt format via e-mail and you can input them manually).
Hope this helps. Worked for me with o2. 8)
If anyone already has this cab file, would you mind uploading it for those who need it or pint them in the direction of a download link? Thanks.
I've been trying to install Internet calling on my diamond, while I managed to get the VOIP working using the WM6VOIP (ftp://xda:[email protected]/Hermes/WMXL_Support_Files/WM6VoIP.CAB) cab file and SIP Config, another problem showed up. I have tried even the last WMVOIP+SipConfig CAB package with the same results
The moment I install the WM6VOIP cab, the internal GPS function goes dead - it does not work anymore. Soft reset will not fix the problem.
It took me 3 hard resets to figure what exactly was causing the trouble
I guess the WM6VOIP cab overwrites some system files and/or registry settings vital to the GPS Receiver
Is there anyone who had the same problem or anyone who tried to enable Internet Calling on HTC DIAMOND. Any solution to this?
Same here
I had the same problem. Hard reset to fix it.
Something in the VOIP installation makes the GPS invisible to any app which tries to use it. Even the QuickGPS app would not work.
Too bad...I would love to have the VOIP option..but not over GPS.
same problem here
So THAT'S why my GPS stopped working! Jeez! I think we need a new CAB of VoIP software from WM 6.1.
EDIT: Has anyone tried this one?
http://forum.xda-developers.com/showthread.php?t=401608
adamz said:
So THAT'S why my GPS stopped working! Jeez! I think we need a new CAB of VoIP software from WM 6.1.
EDIT: Has anyone tried this one?
http://forum.xda-developers.com/showthread.php?t=401608
Click to expand...
Click to collapse
Nevermind. That one breaks GPS too and can't be uninstalled. *sigh*
same here... did you installed it manually or by a pack (containing sip config tool, gsm codec, bass fix and internet calling) ?
I installed the pack... and my gps died... but not on my HTC trinity.
Someone should install all the packages manually, one by one , and see how it goes.
Please post your findings.
Unfortunately I'm in the same boat :-(
daren1 said:
I had the same problem. Hard reset to fix it.
Click to expand...
Click to collapse
But I found solution:
Rename in windows directory following files:
\Windows\dnsapi.dll
\Windows\ipdialplan.xml
\Windows\rtcdll.dll
\Windows\voipphonecanvas.dll
\Windows\ringback.wma
Delete all registry changes made by instalation which is described by author in post #66 in http://forum.xda-developers.com/showthread.php?t=401608&page=7, reset diamond and if you want you can delete now files which was renamed in previus step.
After that go to settings->System->External GPS->Access and remove tick from "Manage GPS automatically". After that confirm with OK and go one more time in the same place and turn it on "Manage GPS automatically". I'm not sure that this change are nessesary, but now I have working GPS whitout hard reset.
Hi, i've got the same problem after installed wm6voip.
Folowing philipZ post, i've just renamed
dll files with total commander(hidden files) and reset diamond, the gps worked again
I've not tryied voip anymore....
Just Renamed, no registery changes:
\Windows\dnsapi.dll
\Windows\rtcdll.dll
\Windows\voipphonecanvas.dll
http://forum.xda-developers.com/showthread.php?t=415262
tof42 said:
Hi, i've got the same problem after installed wm6voip.
Folowing philipZ post, i've just renamed
dll files with total commander(hidden files) and reset diamond, the gps worked again
I've not tryied voip anymore....
Just Renamed, no registery changes:
\Windows\dnsapi.dll
\Windows\rtcdll.dll
\Windows\voipphonecanvas.dll
Click to expand...
Click to collapse
I'd like to rename that files but I can't ! I use totalcommander but when i change name, nothinghappens and the ile get its name back !
Please help !!
Thx !
how to rename dll files
hi guys, like wanabo, i cannot rename any ROM file under \windows. i tried to use the default file explorer, total commander and resco explorer...no luck. every time i try to rename the dnsapi.dll file i get the error 'access denied'.
please can someone help?
thank you
Hello,
i am having trouble with getting work VOIP on my Kaiser.
I downloaded cabs from http://forum.xda-developers.com/showthread.php?t=415262&highlight=voip
Now in Settings > Phone is new tab Internet..
but when i run Sip Config Tool V2.0.1, fill in all fields, click on Save Configuration
application crashes due to error "Invalid argument passed to DMProcessConfigXML"
So i tried to create _setup.xml and cab to set it up this way, but when I try to install this cab i get "Installation of voip.cab was unsuccessful"
Is there any problems with generic HTC rom and VOIP?
thanks for any advice
Hello,
I got exactly the same problem ... Have you found a solution ?
Thanks,
Guillaume
I also can't solve it and simple download PortSIP.
Several month I can't any problem with VoIP on my Kaiser.
It a free tool. No registration.
Hey Guys,
can someone upload me a working copy of his QuickGPS?
I use Windows Mobile 6.1 and quick GPS just says "Could not connect, try again later" since 4 month.
I dont know if it matters, but I have a German Version of the ROM.
TomTom is working, but needs about 5-10 min to find all satelites...
So could someone send me please a original QuickGPS so I can overwrite my registry and files?
Please
I managed to uninstall my QuickGPS, but now I need a QuickGPS Install CAB