Xperia Boot problems? - XPERIA X1 Q&A, Help & Troubleshooting

Hi guys, I have had my Xperia a few days now, it's a Vodafone that I hae flashed the Generic UK software to (without HardSPL) it seems to work ok but I am having a few problems. First of all, whether or not the phone will boot is hit and miss, it will get to the today screen and lock up as soon as the clock on the today screen loads. Hitting the reset switch under the cover will reboot it and it will generally boot fine, usually on every second boot.
Another problem I have is that Shell32.exe crashes a lot as does explorer.exe Shell32.exe seems to crash when installing and uninstalling applications, it does not always happen but it's happened a few times so far and is becoming irritating.
I am going to reinstall the firmware image and leave it a day or two without installing any apps to see if the problem is resolved. If anyone has any posible ideas I would appreciate it. Thanks.
Edit: I have renamed thread to remove the reference to boot problem with memory card inserted because after having removed the memory card the problem still persists so I gues it's unrelated.

Shell32.exe error
I also am having issue with shell32.exe crashing, the problem is repeatable everytime I go into the today screen options, as soon as I exit, regardles of which panel I went in from, shell32,exe crashes and I have to reboot the phone. Sometimes the only way to do so is to remove the battery. Any changes that I have made in the today screen do show up after the reboot. This is really annoying me now as shell32.exe is an important system process. Any thoughts, or shall I just hard reset.

R2AA
I'd make sure you're updated to the GENERIC UK R2AA ROM, if you're already on it, get a new copy of it from here, reformat your mem card and flash the phone again.
I seem to be OK now and not getting the shell32.exe crash anymore. Still having various other problems with it stopping responding (barely anything installed, and nothing really running) but not much more I can do, just learning to deal with it because i can't do with the stress of worrying about it. It's Windows, so expect it to suck.

i was on my R1A, had this problem, Hard reset it and the problem still exist...
Upgraded to the official R2AA10 and guess what? the problem is still there....
What is it that actually causing this problem? im planning on selling my X1 because this problem is so irritating....

Strange
mr_sheen said:
i was on my R1A, had this problem, Hard reset it and the problem still exist...
Upgraded to the official R2AA10 and guess what? the problem is still there....
What is it that actually causing this problem? im planning on selling my X1 because this problem is so irritating....
Click to expand...
Click to collapse
Strangely, I stoppped having this problem a long time ago. I ran on R2A and R3A for a long time without any trouble now, I think it was due to a common program we were having installed because I use different programs than I used to and I havn't seen it happen since I last posted about having the problem.
Stick with a fresh install and see how it goes, install your apps slowly until it doesn't happen anymore.
I can't remember the exact programs I used to use but I have a feeling it was related to homescreen plugins or some such.
Let me know what programs you use maybe we can find a common denominator.

alias_neo said:
Strangely, I stoppped having this problem a long time ago. I ran on R2A and R3A for a long time without any trouble now, I think it was due to a common program we were having installed because I use different programs than I used to and I havn't seen it happen since I last posted about having the problem.
Stick with a fresh install and see how it goes, install your apps slowly until it doesn't happen anymore.
I can't remember the exact programs I used to use but I have a feeling it was related to homescreen plugins or some such.
Let me know what programs you use maybe we can find a common denominator.
Click to expand...
Click to collapse
Okay, so after hard reset, i always install my program again one by one...
Strangely, the error always happen the FIRST time i install any program that uses today plugin...at first i thought it was SPB Wireless, then after another hard reset i installed Beejive, and the same error occurs...
Now mine is a little bit stable, mainly because i dont touch the today setting anymore....i (forcefully, despite the error ) installed Pocket digital clock, SPB Pocket Plus, and SPB wireless....
Its been fine for the last 2 days...without touching any of the today settings...
What is it that actually causing the problem? so strange....

mr_sheen said:
Okay, so after hard reset, i always install my program again one by one...
Strangely, the error always happen the FIRST time i install any program that uses today plugin...at first i thought it was SPB Wireless, then after another hard reset i installed Beejive, and the same error occurs...
Now mine is a little bit stable, mainly because i dont touch the today setting anymore....i (forcefully, despite the error ) installed Pocket digital clock, SPB Pocket Plus, and SPB wireless....
Its been fine for the last 2 days...without touching any of the today settings...
What is it that actually causing the problem? so strange....
Click to expand...
Click to collapse
Well, I never used SPB wireless when i had that problem, but i did use Beejive, Vito Sound Explorer (has a today plugin) HomeScreen++ and Wisbar Advance Desktop (saw a few crashes with this). Saw the problems a lot back then.
When I only ran Homescreen++ I never saw the problem.
I am running 6.5 now so i can't test it for you I'm afraid to find the exact problem, but I'd certainly keep hold of your Xperia because it's definately just caused by a 3rd party app/plugin.

alias_neo said:
Well, I never used SPB wireless when i had that problem, but i did use Beejive, Vito Sound Explorer (has a today plugin) HomeScreen++ and Wisbar Advance Desktop (saw a few crashes with this). Saw the problems a lot back then.
When I only ran Homescreen++ I never saw the problem.
I am running 6.5 now so i can't test it for you I'm afraid to find the exact problem, but I'd certainly keep hold of your Xperia because it's definately just caused by a 3rd party app/plugin.
Click to expand...
Click to collapse
the weird thing is, i ran all my program above for about 4 months on my R1A and no problem occurred....everything was good.
Then i tried to install SPB phone suite, but the installation stopped at 3/4 because the software wasnt signed or something like that (strange, i got it from SPB site), and it just left me some today plugin but withoun any name...it was blank....my today plugin order was in a mess too...i soft reset, it was okay....but i soft reset it again later that day and thats when the problem happened...
I found it strange that it still happens after hard reset and even after Rom change...especially to ANY program that uses today plugin....weird...

Try using R2A_10 or later, I never had any problems from then on, I'm running gtrabs R3A/6.5 atm, although it hasa bunch oof problemsof its own.

alias_neo said:
Try using R2A_10 or later, I never had any problems from then on, I'm running gtrabs R3A/6.5 atm, although it hasa bunch oof problemsof its own.
Click to expand...
Click to collapse
im using the official R2A10 at the moment....the problem still exist the first time i put all my software back....
But it seems stable now for the last 2 days...if the problem occurs again, i'll post it up here,,,

Re: PARANOIDANDROID 3.00 | Only Rom on Android capable of Hybrid mode 02/11
Edit: XDA freak out

decalex said:
ya, that's not gonna happen, BUT, xposed framework mod works on TW based ROMs, and u could always go that route if u want per app DPI. I'm a big fan of PA's implementation though. Xposed works great but a little more tedious.
Click to expand...
Click to collapse
How did this got here?

Lmao, I have noo idea.

Related

Very Sluggish/ Hanging TYTN 2

Hi,
I got a TYTN 2 in Singapore recently. It worked fine for a few days, but now it is very sluggish in its response and also hangs frequently.
Any Tips/ Tricks/ Advice anyone?
Also my GPS doesnt seem to work either. I tried a program called MapKing that came with the CD and some other stuff from sites. Nothing is able to detect the GPS, setting is at COM4, 57600
Thanks in advance
- Axeman
axeman said:
Hi,
I got a TYTN 2 in Singapore recently. It worked fine for a few days, but now it is very sluggish in its response and also hangs frequently.
Any Tips/ Tricks/ Advice anyone?
- Axeman
Click to expand...
Click to collapse
My Tilt is having the same problem: it wasn't sluggish, but was hanging a few times a week, so I went ahead and flashed the HTC ROM. Almost immediately, it seemed more sluggish than it had before, and still hangs a few times a week (sometimes I actually have to pop out the battery to even restart it).
I'm sure that's a very vague description, so I'd be happy to provide any further information that might help.
Thanks!
Hey there
drokkon said:
My Tilt is having the same problem: it wasn't sluggish, but was hanging a few times a week, so I went ahead and flashed the HTC ROM. Almost immediately, it seemed more sluggish than it had before, and still hangs a few times a week (sometimes I actually have to pop out the battery to even restart it).
I'm sure that's a very vague description, so I'd be happy to provide any further information that might help.
Thanks!
Click to expand...
Click to collapse
Hey, to reset, i never popped the battery, i just removed the sim card slot lock, and it would turn off completely. Dont know tho, might be dangerous. Would you tell me which rom are you using? Is it Helmi_Kaiser_1.57.00.02BigStorage_AKU.0.7.0.Cooked.exe ? I am thinking of using this one now.
axeman said:
Hi,
I got a TYTN 2 in Singapore recently. It worked fine for a few days, but now it is very sluggish in its response and also hangs frequently.
Any Tips/ Tricks/ Advice anyone?
Also my GPS doesnt seem to work either. I tried a program called MapKing that came with the CD and some other stuff from sites. Nothing is able to detect the GPS, setting is at COM4, 57600
Thanks in advance
- Axeman
Click to expand...
Click to collapse
Mine encounter lag every now and then. especially evident when using opera to surf. Screen will just freeze and have to wait a few seconds before I can do anything.
axeman said:
Hey, to reset, i never popped the battery, i just removed the sim card slot lock, and it would turn off completely. Dont know tho, might be dangerous. Would you tell me which rom are you using? Is it Helmi_Kaiser_1.57.00.02BigStorage_AKU.0.7.0.Cooked.exe ? I am thinking of using this one now.
Click to expand...
Click to collapse
I've never tried to reset by unlocking the sim card - can anyone confirm that that's a safe, easier way to reset? Either way, I'd rather not have to reset at all.
Anyway, I'm using the ROM with the filename: "RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship.exe"
I don't know much about ROMs, and that's the only one I found easily in the forums. Maybe it's a bad ROM, which would explain performance poorer than that of the original Tilt ROM. Can anyone recommend a better ROM?
Fixed?
Just to catch up here:
I've been using dutty's ROMs for a few weeks, and the device is much more responsive. I still have occassional hangs, but I can usually soft reset - maybe once every week or two I get a hard hang that requires me to remove the battery.
Currently using: Dutty's NewBuild Rom N0.6 +NETCF 3.5 AT&T.zip
Awesome ROM!
i have the same hanging as described above ... screen doesn't react. effects typing on the keyboard also ... i hope this can be fixed by new roms or by some fix. I am trying to figure out what is causing this since it doesnt happen all the time. say when i am playing solitaire for an hour it runs great, when typing an email it gets bad again...
anyone had any similar experiences ?
update: going to try dutty's rom as suggested above will see how it goes
ok, so after a few days with dutty's rom no.6 my device seems fine with exactly the same programs installed. my guess is either it was caused due to using an at&t rom including the radio on a kaiser or some problem with the custel 2.0 rom (and probably a few others).
hope this helps someone ...

Touchscreen unresponsiveness - BRICK?

Okay, so to those of us who have problems with screen ignoring/being very slow with screen taps and/or buttons, read on.
I flashed ROMeOS ROM and started having problems where I would tap on something, and it would ignore it. I would keep tapping and tapping, but nothing happened. Sometimes, even hardware buttons were ignored, about 40% of the clicks. I never had that problem with Dutty's Diamond ROM or WM6 ROMs. Issue seems to be related to latest 6.1 builds... or so it seemed at the time.
After pulling out half of my hair, reflashing all kinds of ROMs, reflashing to latest HardSPL, etc etc... I almost threw my kaiser at the wall.
First I thought it's TouchFLO, then I thought that it's the latest 6.1 ROMs.. then I thought it's related to 3.56 HardSPL.. well eliminating those factors one by one DID NOT fix the problem. Right now I went 100% to stock ROM (one it came with) and AT&T's original SPL. I started having sound problems (w/e radio I tried did not work) so I flashed Hyperdragon Wm6.1 ROM.
About 90% of the problem is phone ignoring ANY kind of touchscreen taps/drags.
About 10% of the time its the hardware buttons that have the problem - for example I push "call" (or any other softkey) button, and nothing happens, while touchscreen could be working fine at that time. In about 10 seconds, hardware buttons would start working again.
Some information that was gathered from this thread and personal research:
It looks like problem is NOT related to the following:
- POWER. Connecting phone to AC power does not solve the problem. Subjectively, it may improve it a little.
- BLUETOOTH/WIFI. Problem persists with EVERYTHING disabled and phone being in Airplane mode.
- PARTICULAR 6.1 ROM. I had this problem on ANY 6.1 ROM I tested (and I tested all the way from AT&T almost-official WM6.1).. maybe that's why they didn't release it?
- OPERA browser. Some people never had Opera and they still have this problem (please confirm this!).
- SPB/WISBAR interface software. Although having Wisbar stuff does make it a lot worse for me.. and I still have the problem without SPB or WISBAR installed.
- S2U2 screen lock. Still had the problem w/o S2U2 installed.
- iGo 2006 or iGo 8. Many users with this problem never used iGo.
Problem MAY be related to the following (needs more research, please help):
- Original SPL versus HARDSPL 3.XX
- WM6.0 versus WM6.1 (I don't think I had any problems running original AT&T 6.0 ROM, but I did have sound (radio) problems, so had to flash 6.1). Several users report that WM6.0 is immune to this problem.
- A combination of running WM6.1 with latest HardSPL?
- Custom ROM VS Original ROM. Perhaps problem is in the tweaks to the registry.
- Simple things like overtime connection weakening in touchscreen connection to the mainboard. Whoever can open a Kaiser could try to replug/clean it and report back to us.
- Radio version. Should be easy to test, just need to reflash all kinds of older radios and see if problem persists.
Please make sure that you test your phone with some touchscreen intensive games/software a lot for AT LEAST 3-4 days. I had it happen several times where it would be fine after reflash for about a day or so, and then it would come back in full force.
BRICK?
In my case, running HTC WM6.0 ROM with HTC SPL DID NOT fix the problem, I can even say it made it worse. Touchscreen would respond to about 10% of the screen taps. Tap pressure doesn't make any difference.
Also, running AT&T stock shipped ROM with stock shipped radio and SPL did not fix it. I guess at this point, nothing will. Waiting for replacement tilt.
Hope nobody else will get it as bad as I did. All I can say is... make those relfashes count.
Hmm isn't Touch Flo one of the cool things with the Kaiser??? How do you navigate in programs now it's disabeled?
DarkDvr said:
Okay, so to those of us who have problems with screen ignoring/being very slow with screen taps - I think I've found a fix. Here's a little background:
I flashed ROMeOS ROM and started having problems where I would tap on something, and it would ignore it. I would keep tapping and tapping, but nothing happened. Sometimes, even hardware buttons were ignored, about 40% of the clicks. I never had that problem with Dutty's Diamond ROM or WM6 ROMs. Issue seems to be related only to latest 6.1 builds.
After pulling out half of my hair, reflashing all kinds of ROMs, reflashing to latest HardSPL, etc etc... I almost threw my kaiser at the wall.
So if you have similar problems - try using Shnaps' Advanced Config to disable the TouchFLO altogether.
Another thing that I've used is PocketMechanic to clean up the notification queue. After fresh install of HypreDragon (latest as of Aug 5), I had 46 duplicate notifications. Removing those seemed to ease the problem, but NOT fix it. Disabling TouchFLO seemed to finally fix it.
I hope this helps somebody. I'll update this thread if I keep having this problem..
Click to expand...
Click to collapse
Thanks for the head's up! I'll definately try that tomorrow (danish time).
Foxhunter123 said:
Hmm isn't Touch Flo one of the cool things with the Kaiser??? How do you navigate in programs now it's disabeled?
Click to expand...
Click to collapse
Never really caled for it, I use my hardware buttons (D-pad) to scroll, I find TouchFLO to be too unreliable... maybe it's just me, but nothing beats a hardware button which you actually "PUSH".
spip72 said:
Thanks for the head's up! I'll definately try that tomorrow (danish time).
Click to expand...
Click to collapse
Do you have the same problem?
Hello,
First off thak you for the post. Ive got two identical Tilts both with the exact same radio/boot/roms. One has this issue and the other doesnt. I will be disabling it on the one havong the issue and report back! Thanks much!!!
I was also having this problem. my biggest complaint was my keyboard was all over the place. Sometimes it wouldnt see key strokes at all, other times one key hit would register as 3 or 4.
Sent a few test messages and This seems to have helped.
THANK YOU!!!
My Kaiser was getting close to being flashed back to a WM6 rom or quite possibly embedded in a wall.
where do you find cab for touchflo? I was looking for that but could not find it.
tamkhanh said:
where do you find cab for touchflo? I was looking for that but could not find it.
Click to expand...
Click to collapse
seek and you shall find.
It's all over the place.
Try playing around with the TouchFLO sensitivity options in KaiserTweak
i upgraded to official 6.1 about two weeks ago...
i recently started having the "missed taps" problem...
i have a feeling that KaiserTweak has something to do with the issue...if memory serves, i don't remember experiencing the issue BEFORE i played with the "TouchFLO->Sensitivity" and "TouchFLO->Finger Pressure" options...i just launched KaiserTweak right now and its showing those values as set to defaults where as i could've sworn i changed them to the advised settings a day or two ago approximately when i started experiencing the issue...just a point to clarify, i was only playing around for no particular reason and my taps were not problematic before
i've just changed them to the advised settings and did a soft reset to see if these are the kind of settings that are forgotten after a soft reset...but they stuck...so i'm gonna observe this for a couple of days with the advised settings effective and see if they have reverted to defaults on first sight of the issue...i'll report back here if that happens because that would be a pretty strong correlation...almost enough to prove cause and effect
Well, problem is, last time I've used KaiserTweak was like a year ago, so my touchscreen problems cannot be linked to KaiserTweak. I don't even have it on my tilt.
Also, it's definitelly not a touchscreen itself, since this problem is application-dependent. Once again, S2U2 and Opera are immune to this problem. Windows' build-in apps (file explorer, bottom bar, etc) all suffer from it.
I've noticed this too, but I've found a slightly longer tap seems to make things reliable for me.. Instead of a quick 'jab' if I sort of touch it, it seems to be better.
and keyboard too I've noticed.. I mostly notice it with the hard keys rather than the keyboard, but I don't use the keyboard a lot.
I'll try looking for duplicate notifications, what else will do that besides MemMaid? I might reinstall it, it was handy. I previously found phoneAlarm would grow notifications over time, I suppose I need to watch for that anyway.
khaytsus said:
I've noticed this too, but I've found a slightly longer tap seems to make things reliable for me.. Instead of a quick 'jab' if I sort of touch it, it seems to be better.
Click to expand...
Click to collapse
True, if I keep pushing on the screen button, in about 5 seconds it will be clicked. But that's ridiculous, i gotta say.
I'll try looking for duplicate notifications, what else will do that besides MemMaid?
Click to expand...
Click to collapse
I use PocketMechanic - good stuff. Has lots of useful functions, including notification queue cleanup and analysis.
Just had another "seizure" - touchscreen would not respond AT ALL for several minutes. No matter what or how I tap - complete ignore.
After couple of minutes it started working again.
Interesting that S2U2 worked fine. Seems that windows just chooses to ignore touchscreen input.
I'm forced to return to WM6.0 ROM...
Please, anybody look into this.. phone is becoming to be unusable - I can't even enter a phone number.
DarkDvr said:
Do you have the same problem?
Click to expand...
Click to collapse
Yeah it's really bad here. I've tried all sorts of tricks, including:
Re-install 6.1
Re-install 6.1 with the recent radio update found on the e-club
Install SPL 3.56
Disable HTC today screen
Kaisertweaks - tweaks on and off
Disable radio completely (seems to help, but makes the device useless)
Disable activesync
Disable quickgps
For now, I've done 2 things that seems to help:
- Disable the HTC task manager - improves the responsiveness
- Kill the MSTLI.EXE process - improves on the number of freezes
But I still experience freezes, and it's really getting to me. I need a responsive device, not this c****
ASCIIker said:
i upgraded to official 6.1 about two weeks ago...
i recently started having the "missed taps" problem...
i have a feeling that KaiserTweak has something to do with the issue...if memory serves, i don't remember experiencing the issue BEFORE i played with the "TouchFLO->Sensitivity" and "TouchFLO->Finger Pressure" options...i just launched KaiserTweak right now and its showing those values as set to defaults where as i could've sworn i changed them to the advised settings a day or two ago approximately when i started experiencing the issue...just a point to clarify, i was only playing around for no particular reason and my taps were not problematic before
i've just changed them to the advised settings and did a soft reset to see if these are the kind of settings that are forgotten after a soft reset...but they stuck...so i'm gonna observe this for a couple of days with the advised settings effective and see if they have reverted to defaults on first sight of the issue...i'll report back here if that happens because that would be a pretty strong correlation...almost enough to prove cause and effect
Click to expand...
Click to collapse
My device is currently without kaisertweaks, and I still have the freezing issues.
DarkDvr said:
Well, problem is, last time I've used KaiserTweak was like a year ago, so my touchscreen problems cannot be linked to KaiserTweak. I don't even have it on my tilt.
Also, it's definitelly not a touchscreen itself, since this problem is application-dependent. Once again, S2U2 and Opera are immune to this problem. Windows' build-in apps (file explorer, bottom bar, etc) all suffer from it.
Click to expand...
Click to collapse
I concur, it is application specific. I tried to run the "Task manager" from Fdcsoft to see if it was related to a process eating up all the CPU. But the problem doesn't occur while the application is focused.
DarkDvr said:
Never really caled for it, I use my hardware buttons (D-pad) to scroll, I find TouchFLO to be too unreliable... maybe it's just me, but nothing beats a hardware button which you actually "PUSH".
Click to expand...
Click to collapse
TouchFlo is way too unreliable to me too.
DarkDvr said:
True, if I keep pushing on the screen button, in about 5 seconds it will be clicked. But that's ridiculous, i gotta say.
I use PocketMechanic - good stuff. Has lots of useful functions, including notification queue cleanup and analysis.
Click to expand...
Click to collapse
Oh wow, not a LONG PRESS, literally a 'touch' vs a 'tap'. What you describe would be seriously annoying.
Thanks for the suggestion, I'll look at it

tilt keeps freezing

hey guys, not sure whats going on, but my tilt lately keeps freezing, but it only freezes when i go into landscape mode. i've ran the same programs for a long time (palringo, google maps, live search, kaiser tweak and srs wow) i'm not even running skyfire anymore, and i've uninstalled my opera browser but it keeps freeze. i've done some reflashes and hardware resets, and only ran the above programs, and it still ends up freezing when i put it into landscape. Anyone know what could be causing this? it doesn't matter if im typing landscape in notes, palringo, PIE or anything else, always freezes. The ironic thing is that if i bust out my stylus and type w/ that using the soft keyboard it seems to run just fine (but slows me down A LOT). any help would be much appreciated.
Do you mean your hardware keyboard lags?
If so in software is a speedup keyboard .cab.
stylez said:
Do you mean your hardware keyboard lags?
If so in software is a speedup keyboard .cab.
Click to expand...
Click to collapse
no its not a keyboard lag by any means, the phone literally freezes. i dont even have to type when its in lanscape mode for it to freeze, as soon as the screen changes orientation it freezes immediately
simbadogg said:
no its not a keyboard lag by any means, the phone literally freezes. i dont even have to type when its in lanscape mode for it to freeze, as soon as the screen changes orientation it freezes immediately
Click to expand...
Click to collapse
Thanks for clarification, just that you say soon as use onscreen keyboard no issue, are you using a stock ROM? Does it happen on a clean flash no programs installed?
stylez said:
Thanks for clarification, just that you say soon as use onscreen keyboard no issue, are you using a stock ROM? Does it happen on a clean flash no programs installed?
Click to expand...
Click to collapse
sorry, i should have given a lot more info, but i had to jet to class. Anyways, its not the stock rom, i'm running NATF's Lite rom (no TF3D). I actually downloaded originally around september/nov/dec of 08 (dont remember, but its been months that i've been running it). And never had a problem with it...now all of a sudden it seriously craps out everytime i run it. I tried running Hyperdragons IV Lite and i was experiencing some of the same problems. I'm really starting to think its one of the problems i'm running, so i'm going to to a hard reset (again) and see if it runs just palringo, and google maps w/out any problems. its just getting super frustrating to be honest. i'm running the exact same programs that i've ran for the last year, but now its deciding to act up. hopefully its something in the software and not hardware
ok...so i got home, and installed the OEM att tilt rom. really, no matter what program i install, pretty much anything. the freezing occurs. any out there familiar w/ cell phone hardware? i'm thinking that might be the cause, if so...do you think there's anything that can be done/replaced to fix it?
Hi, this started happening to my just today also! At first I thought it was the onscreen keyboard that made my phone freeze (as I have seen others with the same issue) and thought I could fix it by using another keyboard app. I used SPB's keyboard and it prevents my phone from freezing and I'm able to type things using it. BUT my phone STILL freezes when I put it in landscape mode and try to type something. It freezes after typing a couple of letters. This is stock ROM; I've never flashed it.
Is there a .dll I can use to repair or anything of the sort?
Btw, I'm using a Tilt. Thanks!
anyone have any method ..to prevent this problem???
I find that if restart the phone few times will freeze at gray screen .."the original HTC gray blank screen with loading box in the middle" but the antenna reception green light is normal blinking (all the button not functioning).... -solution have to press reset button below ...
so now everytime install new program very scare to restart .. if un lucky ..will stuck at that screen.... really wonder why ...is it the WM6.1 not stable???
I use motorola linux ..no such problem...
simbadogg said:
i'm running the exact same programs that i've ran for the last year, but now its deciding to act up. hopefully its something in the software and not hardware
Click to expand...
Click to collapse
Try the relevant ROM thread also look at your hardSPL version. Some users have fewer freezing probs just by updating hardSPL.
tsfatt said:
so now everytime install new program very scare to restart .. if un lucky ..will stuck at that screen.... really wonder why ...is it the WM6.1 not stable???
Click to expand...
Click to collapse
Not at all, there's definitely something wrong with your setup if it wont even boot fully. Maybe a hard reset and some testing between installing each individual program will weed out the culprit. That said I've found (at least the HTC official) WM 6.0 ROMs to be much more reliable and stable than WM 6.1 ROMs.
Flying Kiwi said:
Try the relevant ROM thread also look at your hardSPL version. Some users have fewer freezing probs just by updating hardSPL.
Click to expand...
Click to collapse
Sorry if it's a dumb question, but is there a HardSPL update for OEM OS?
DaDragonChild said:
Sorry if it's a dumb question, but is there a HardSPL update for OEM OS?
Click to expand...
Click to collapse
Not as such - hardSPL is made by dedicated folks who have customised the OEM version but installing it will mean you no longer have an 'official' setup. That said, you can always revert to the official HTC SPL if needed for eg a warranty return. You could also install a newer HTC SPL for your ROM (as long as it's compatible *be careful about this* - eg I'm using the 1.93 HTC SPL with my ROM instead of the 1.56 SPL). This is all explained in the Kaiser wiki (through the xda-wiki button above) so it's well worth having a good read there
aaaahh I looked around. and I can't find a driver to reinstall for the hardware keyboard... I'm assuming this would fix it~
Sorry to double post but I just wanted to say I fixed the problem by backing up and restoring with SKTools after doing a hard reset. It makes me think, what exactly caused the problem in the first place if doing this fixes it? Is there anything that SKTools leaves behind in an All System backup? Perhaps something messed with my registry causing the keyboard to freeze the phone when used.
I'd hate to think my phone can actually get spyware now. Maybe Skyfire's true desktop viewing of webpages allows for this to happen?
Let me know what you guys think
" used Spb's keyboard and it prevents my phone from freezing and I'm able to type things using it. BUT my phone STILL freezes when I put it in landscape mode and try to type something. It freezes after typing a couple of letters. This is stock ROM; I've never flashed it."
If I will you to avoid ...uninstall this soft keyboard ... use back the original keyboard at the time being and see... if u restore back what is the diff compare to now ... If I not wrong still the same ...
FYI, I got this freezing problem is after I have install PCM kb 0.14 ...then I try install & uninstall & install ..and need to restart the phone ..2 out of 4 time is freeze at loading screen .. now really worry is it b'cos I uninstall it at the same time have remove certain original files .....
WM is diff with windows ...lack of tool to chk which system files damage .... I really hate hard reset ..just like computer... imagine keep format the hard disk ....
Hard reset comparible to system recovery process
tsfatt said:
WM is diff with windows ...lack of tool to chk which system files damage .... I really hate hard reset ..just like computer... imagine keep format the hard disk ....
Click to expand...
Click to collapse
If only restoring a full size PC was as easy and quick as hard restting. Sure there's a little work involved in reinstalling apps after completing the hard reset but if the apps are well designed ones that install via activesync, that's as easy as going to Activesyncs add and remove programs function and ticking a box. If this is not available then maybe the old app is the cause of the problem?
A hard reset every now and again is very useful for maintaining peak performance and it certainly weeds out whether a problem is hardware or software related pretty quickly.

can't get GPS fix

Hi,
I'm unable to get GPS fix.
Any ideas?
Thanks.
its the same problem for me...
help is really needed!!!
What software are you using? I had the same problem yesterday after having used it flawlessly for a month now. Had to hard reset and it started working again.
im using GARMIN MOBILE XT. v 4.10.40wp,
this software is be used on TD1, it worked perfectly well
here guys i dont have the diamond 2 but when the fuze or touch pro released it too had gps problem and this is the fix i use maybe it will work for you guys
http://forum.xda-developers.com/showpost.php?p=2894542&postcount=1
I had this as well, waited several mins and had no results. Try the below and then things should be all well.
Run the quick gps app on the phone, that will update the phone with the sat positions. Then stand outside or by a window for a min or two and you should get them.
This is interesting for GPS problems http://blog.mohdimran.com/2008/11/htc-touch-pro-gps-problem-tweaking.html
I had problems with apparently non responsive GPS, doing all the mods in the link above has transformed it.
Also, before anything else, if it doesn't appear to work at all, make sure your software is set to look for the GPS device on COM4.
I had tried absolutely everything prior to doing a hard reset. In the end I just wrote it off as one of those quirky little things that makes this phone unique lol.
I had this problem randomly. So I checked the status of the GPS driver using Dotfred's Task Manager (Device Manager tab) (freeware at http://www.dotfred.net/TaskMgr.htm) and I found that sometimes after a soft reset it was not loaded (why I do not know) but could be loaded manually.
Therefore I wrote a little utility, DeviceStart, to load and start it.
If you have this problem copy DeviceStart.exe in \Windows directory, create a shortcut like this (or use the one inside the .zip file)
55#"\Windows\DeviceStart.exe" Drivers\BuiltIn\gpsdriver 60
and put it in \Windows\StartUp directory.
DeviceStart.exe requires .NET Compact Framework 2.
The same happened yesterday to me.. No way to get it working even after 5 soft resets, the GPS just couldn't kick in. I was genuinely scared that the GPS module broke down. Even after the hard reset it behaved strangely in the beginning, only after quick gps it finally started working. The worst thing is, if this happens again and I'm abroad where I'll really need GPS - a tought of all the hassle with data roaming etc doesn't make me exactly happy.
I'm still trying to figure out what could have caused my gps stopping working. The only thing I can think of was Clean RAM, 3rd level. Is there any chance it was caused by that? If so, would the utility (Startdevice) from 2 posts above start it again?
cassper1 said:
I'm still trying to figure out what could have caused my gps stopping working. The only thing I can think of was Clean RAM, 3rd level. Is there any chance it was caused by that?
Click to expand...
Click to collapse
Who knows! But in that case a soft reset should restore it working.
cassper1 said:
If so, would the utility (Startdevice) from 2 posts above start it again?
Click to expand...
Click to collapse
Check using Dotfred's Task Manager. It can show if gpsdriver is loaded or not and using it you can try loading it manually. If it succeed Startdevice can do it automatically.

X1 Spontaneously restarts. Help me find out why.

In the past couple of days I've noticed that the phone restarts on it's own. No new software was installed recently (except Iris Browser, but that's not even running). Has anyone experienced something similar?
yes, but with me it only happens when I slide my phone open or close it...
vsviridov said:
In the past couple of days I've noticed that the phone restarts on it's own. No new software was installed recently (except Iris Browser, but that's not even running). Has anyone experienced something similar?
Click to expand...
Click to collapse
As usual, do a hard reset and if the problem is still there, ask again .
The reason is either a conflict between some of the soft you have installed or general WinMo attrition (piling up of reg errors, old files, etc.).
Of course, I might be wrong .
SyntheticDistortion said:
yes, but with me it only happens when I slide my phone open or close it...
Click to expand...
Click to collapse
That's a hardware problem. The cable connecting the two parts of the phone has corroded.
Mine is in constant, nonstop usage since 01.01.2009 as my main&only mobile device
(besides the computer).
And I didn't hardreset/upgrade yet.
So it's a 10th month of the same FW since the beginning.
Lately my X1 behaves strangely, just because there's tons of apps installed and uninstalled,
some of them being beta (Opera 9.7 - great but buggy and problematic) and apparently playing bad games with the device.
(Opera 9.7 sometimes crashes the way you cannot start it anymore yet the process is impossible to kill even in advanced task manager app)
I get angry occasionally but in fact that's how it goes...
Hard reset is a must probably!
Probably will have to do HardReset if it happens again. Maybe it'll be a chance to try out some of those 6.5 ROMs.
if after hard resetting was performed and stiill experiencing the same problem, try to replace the flexible connector......and if still same u need to do a full reprogramming

Categories

Resources