Hello! I`m from Brazil and I bought a HTC Diamond unlocked in US this month.My operator works in a 2100 Mhz 3G frequency, compatible with the HTC.Butt it can`t find the 3G signal, only the GSM. I tested an other operator SIM Card, wich works with a 850 Mhz frequency and the 3G was perfect!Does a Radio Update can fix this problem?
Rom Version> 1.93.422.4 WWE
Radio Version> 1.00.25.08
Thank`s!
celsokhafif said:
Hello! I`m from Brazil and I bought a HTC Diamond unlocked in US this month.My operator works in a 2100 Mhz 3G frequency, compatible with the HTC.Butt it can`t find the 3G signal, only the GSM. I tested an other operator SIM Card, wich works with a 850 Mhz frequency and the 3G was perfect!Does a Radio Update can fix this problem?
Rom Version> 1.93.422.4 WWE
Radio Version> 1.00.25.08
Thank`s!
Click to expand...
Click to collapse
Yes...........http://forum.xda-developers.com/showthread.php?t=470306
Related
I was in a telstra shop today and asked about the WM6 ROM for telstra. The salesman metioned that there had been a few bugs but 2-3 weeks was the current expection.
That's good to hear. At the moment i have a Dopod c730 and Telstra Tre 750 (with the new WM6 voda rom) on it and neither of them can get 3G/HSDPA...only Edge connections. After 3 calls to Telstra they said 1) Dopods aren't supported because we dont sell them and 2) Windows Mobile 6 updates arent supported at all...
I just wish Optus' 3G rollout would speed up!!!!!!!!!!
ha how funny, i have it no problems at all...do you have a next g sim card?!?!?
@aussienick
I too have a Treo750 Telstra but now after the WM6 upgrade is now branded Vodafone.. I can get both 3G and H (which I am assumiing stands for HSDPA) and it automatically switches to H when I am using the internet/data and goes back to 3G.. I use a Voda SIM on this phone..
This sucks
Well this sucks..My Treo with WM5 was working great with the #G speed from telstra, then when updating to AT&T rom it went to edge and now with the Voda rom from Palm UK it only allows me Edge too...
I've had the same problem actually. I started with 3G working find, then went to WM6 ATT rom, then to UK vodafone. Still no 3G just edge.....this doesn't look good. Perhaps we need to go back to the original telstra rom??? Anyone got it?
i've never had a problem. my original rom was the vodafone because i purchased my Treo 750v from overseas. worked great on Three's 3G network although i had to find the modem settings through whirlpool.net
i've upgraded to the ATT WM6 Rom and it was even better... now with HSDPA! everything was pre configured so i didn't have to do anything even!
and after Vanilla-ing the Rom nothing's changed. i get HSDPA when possible. i only get Edge when i'm deep inside a building but i have forced my phone to lock onto an UTMS band only
Could this be the reason,
The AT&T Rom only allows
GSM(900 + 1800 + UMTS 2100
or
GSM(1900 + 850) + UMTS (1900 + 850)
Telstra are using:
GSM 900 / 1800
UMTS 850 (NextG) / 2100 (shared with Three)
amberzombie said:
but i have forced my phone to lock onto an UTMS band only
Click to expand...
Click to collapse
Hi, can you tell me how to do this on my treo? maybe that will help me..
aussienick said:
Hi, can you tell me how to do this on my treo? maybe that will help me..
Click to expand...
Click to collapse
yeah just go to Menu on the bottom right then Preferences - Phone Settings
tap on the Services tab and go to Band Selection
Under Select Network Type change it to UMTS
then click ok you're done
FSB said:
Could this be the reason,
The AT&T Rom only allows
GSM(900 + 1800 + UMTS 2100
or
GSM(1900 + 850) + UMTS (1900 + 850)
Telstra are using:
GSM 900 / 1800
UMTS 850 (NextG) / 2100 (shared with Three)
Click to expand...
Click to collapse
If that's the case, then what options are shown in the Telstra ROM or the Vodafone ROM for band selection?
I don't remember, maybe someone here has an old WM5 build, and can tell us.
I remember having 4 options on WM5 and now only have 2 with WM6.
Currently on WM6 I only have:
GSM (900+1800) + UMTS 2100
GSM (1900+850) + UMTS (1900+850)
On the old WM5 I have both above plus 2 more, 1 i think only had GSM and the other I think was GSM + UMTS (2100, 1900, 850)..
Sorry could not properly remember..
amberzombie said:
yeah just go to Menu on the bottom right then Preferences - Phone Settings
tap on the Services tab and go to Band Selection
Under Select Network Type change it to UMTS
then click ok you're done
Click to expand...
Click to collapse
Thanks mate, it works a treat! I also set this up on my Dopod c730 (i had to choose WCDMA) and it works great!
Thanks again!
aussienick said:
Well this sucks..My Treo with WM5 was working great with the #G speed from telstra, then when updating to AT&T rom it went to edge and now with the Voda rom from Palm UK it only allows me Edge too...
Click to expand...
Click to collapse
Make sure you have a 3G or nextg sim, I just called into a telstra seller, and they gave me a new sim (no charge) for nextg.
Telstra have now replaced it, and it work fast. 3G normal and U for internet. 550
I thought it work OK with WM5, but maybe I was wrong??
Now internet/email is real fast, on WM6
I have an Treo 750-1.16-RWE, upgraded with 3 rom vanilla.
Treo 750 WM6 For Aussie World
Hey any of you fellow Aussie Landers used a WM6 upgrade then used PoP3 via telstra data plan on telstra 3g sim
Not keep to screw up my wife's new 750.
Spoke to Palm and they were not as sure at this 3-4 weeks window?
Spoke to head of Mobile Telstra and he confirmed problems may delay til <gulp> next year.
Either way loss of Telstra branding crap on my phone isn't an issue if it still allows her pop3..
FYI PoP3 is not Big Poo or Telstra .
Thanks in advance folks
come on telstra!!!
Telstra ROM anyone?
Does anyone have a Telstra ROM for the Treo 750, WM5 or maybe WM6 ?
What would be the best ROM to use for Telstra connectivity?
MultifyG said:
Does anyone have a Telstra ROM for the Treo 750, WM5 or maybe WM6 ?
What would be the best ROM to use for Telstra connectivity?
Click to expand...
Click to collapse
Available form the palm.com.au website.
Hi!
my friend has got a Blue angel, but its american, and said it only support gsm 850 networks is it possible to renew radio program or something like this on the machine, to work with GSM900, GSM1800, GSM1900 (hungarian) phone networks?
thx if u help
As far as i know, BA is quad-band and supports all four networks you just mentioned.
Only one thing: in my opinion, BA has a bug in radio regarding GSM 850, so usually when there is GSM 850 and GSM 900/1800 on the same area it has a problem and looses signal.
Anyway, if using WM2003SE you can install a band selection application.
JP
I'm looking to buy a diamond and i need to make sure I get a version that will work with all the AT&T bands. I only get edge where I live, no H :-(
on the back of the box it says:
Network
HDSPA/WCDMA
900/2100 MHz
Up to 384 kbps up-link and 7.2 Mbps down-link speeds
Tri-band GSM/GPRS/EDGE:
900/1800/1900 MHz
(Band frequency & data speed are operator dependent)
The model number is P3700
any help is appreciated.. Thanks!
dont get it. I bought the same version and I am trying to use it on AT&T's network and it does not work. Calls drop off and calls dont get in. Have tried a whole lot including updating the radio but does not work.
You can buy any Diamond you want. You just need to flash a new quad band radio to it. There is a whole list of radios here: http://forum.xda-developers.com/showthread.php?t=407956.
That's what I did an everthing works fine.
Wind dancer, Maybe you can help me here. I bought a 2g phone with the and updated the radio to .05 but still dont get reception. when i do *#364 I see that the band that the phone is operating on is 850.
What radio did you you and did you update the ROM to 1.93? I am still on the base rom...1.37.720.2 WWE
I bought my HTC Diamond on UK. I updated the ROM to the RUU_Diamond_HTC_HK_WWE_1.93.831.1 this was supposed to make my phone QuadBand. It does work in USA (Boston) where I live. But I have never seen my phone doing 3G and speed test top was around the 1xx kbps.
Any Ideas?
PS. I am on the ATT network
Are you sure you have 3G coverage in Boston? Do you have a USIM-card (which I was told to be required for UMTS stuff)?
3G speed
I did look at the ATT coverage map and it said that I do have coverage.
How do I know what type of SIM I have? The SIM does have the 3G logo on it.
Are you sure your phone has the bands?
Check the Band setting, Settings->Phone->Band,
in the dropdown box for "Select your GSM/UMTS band", my US 3G ATT phone shows the following options:
Auto
UMTS(850+1900)+GSM(850+1900)
(oddly enough, the settings have to be on Auto for the phone to work..)
When I bought my diamond, I was curious about my sim too, so I took it into the ATT store and asked if it was the "latest 3G sim" and he said yes. Mine is half white (top) & half Blue (bottom), with a orange 3G fireball in the topright corner.
If yours matches all that, then take it to the ATT store and see if you get 3G in the store
Also..if you have doubts, I've had multiple Sales reps in the store tell me I can get a new Sim for free at any time, just need to ask.
3G
I do have that SIM half blue half white with the 3G fireball logo.
On my select network I have
Auto
GSM
WCDMA
on the GSM/UMTS band I have
Auto
UMTS(900+2100)+GSM(900+1800)
UMTS(850+1900)+GSM(850+1900)
UMTS(800+2100)
UMTS(850+2100)+GSM(900+1800)
UMTS(850)+GSM(900+1800)
UMTS(1700)
rpassmore
What ROM do you have?
RUU_Diamond_HTC_Europe_1.93.401.2
RUU_Diamond_HTC_Europe_1.93.401.2
Does this ROM supports USA 3G????
Sorry for my English
You have the European version and have only HSDPA 2100 / 900 (3G) and probably ATT works in HSDPA 850 / 1900, if this is the problem, sorry 3G is impossible for you, because is a hard problem, not a soft problem, search in this web there are many post about this. The European is quad band in GSM but not in HSDPA (3G)
CArlos
How about if I use another ROM
If I use another ROM ? would I be able to do 3G?
No I think it's impossible since it's different hardware I believe.
I think the one you have from UK, it only contained HSPA 2100 and US /Canada is using HSPA 850/1900, that's why you don't have the 3G signal.
Quad band only for voice and EDGE.
cmilian said:
rpassmore
What ROM do you have?
Click to expand...
Click to collapse
I'm using the stock rom/radio for the Unlocked US 3G.
1.93.422.4 WWE
1.00.25.08
But I missed the fact that you're using a European Diamond. sorry.
is there any conection betwen 3G and front camera....
i think i have an Eropean model from UK Vodafon which has the front camera... but i am not sure about 3G !
????
Hello everyone,
I bought a G1 from Rogers in canada, but now I live in germany.
I don't know how it actually works, but I have been unable to get 3G connections here (only GPRS and normal cell phone), using the O2 company. After doing some research I realized that the radio frequencies are different (according to http://www.gsmarena.com/network-bands.php3?sCountry=GERMANY, then go to canada to check it out).
Are there any possibilities to change the radio frequencies of UMTS? My phone is rooted.
Thanks a lot!
Dial:
*#*#4636#*#*
Then goto phone info
Scrool down list
Change preffered network to WCDMA only for 3G only
Exit
Edit: O2 doesnt use the same 3G freq as Rogers, so you must stay with EDGE.
if memory serves correctly - o2 and tmobile work on the same frequencies in germany
if this is the case there is nothing you can do as the radio frequency is a hardware thing
Thanks for the reply!
I did that, but after a while it changes back to 'WCDMA preferred'.
I went to the O2 store, and the guy tested the chip with a Palm Pre, and it worked fine.. but with my G1 it didn't, only GPRS.
rogers use different frequencies to most other providers worldwide
rogers, atnt and some south african one use one set for 3G but everyone else uses another
you WILL NOT get 3G on the rogers dream on frequencies not used by rogers
also
QUESTIONS go in the QUESTION and answers section
Ace42 said:
Dial:
*#*#4636#*#*
Then goto phone info
Scrool down list
Change preffered network to WCDMA only for 3G only
Exit
Edit: O2 doesnt use the same 3G freq as Rogers, so you must stay with EDGE.
Click to expand...
Click to collapse
will this work with any phone? Sorry NTT. i have just bought a htc touch 3g but it won't work in the bush. the phone supports HSDPA/WCDMA:
900/2100 MHz and out here we have 850/2100 mhz wcdma.
marco97xr said:
will this work with any phone? Sorry NTT. i have just bought a htc touch 3g but it won't work in the bush. the phone supports HSDPA/WCDMA:
900/2100 MHz and out here we have 850/2100 mhz wcdma.
Click to expand...
Click to collapse
All I know is that it allows you to force a specific phone freq, im not sure if all HTC phones have test mode which that number brings up. It doesnt allow you to change the freq only force one type. So a quad-band phone can be forced to use 2G only instead of 3G.It doesnt give access to unsupported bands cause thats a hardware thing.
I am discussing this very subject here: http://forum.xda-developers.com/showthread.php?p=15461093&posted=1#post15461093 would appreciate any comments or suggestions.