I've installed the last ROM for my HTC Diamond. When I receive a new sms and the vibration is on, the PPC doesn't vibrate if my device is in standby, just if it's turned on. Is there a way to fix this problem?
I don't want to activate the vibration when on Ringing Mode, just when the vibration mode is active, like in the old ROMs
have the same problem, only thing to solve it is to activate the ringing + vibrate mode (a no-go) or to activate the wake-up on new sms (via diamond tweak) but this is no solution for me, too, because the device turns on then on every new sms... its the only negative thing on the new rom('s) but very annoying!
malsehn said:
or to activate the wake-up on new sms (via diamond tweak)
Click to expand...
Click to collapse
That's a good idea. I tried this solution and it works. Better then to be forced to activate the vibration + ringing mode. Thanks a lot
yes, but on the other side it forces you to use any screen-lock application or your diamond will going to have its own life in your pocket recieveing a sms... and when you do so, you will have problems using your diamond as an alarmclock and so on.. one thing leads to an other... i hope that anyone comes along with a clue to this really only 2.03-rom issue one day.
Related
Hi, i'm new to Qtek 2020i (XDA IIi) and i'm wondering how do i set profiles like what it used to be in Nokia, where we have silent mode, and so on.
How can i do that?
Also, how can i switch to vibrate mode or silent mode and i still have my alarm ringing loud?
Is there any ways i can do that or any software that can do that?
If you tap the speaker icon on the top bar, the popup volume slider has three preset settings.
1) On , just returns to the last volume setting
2) Silent, deactivates the volume but enables the vibration.
3) Off , as you would expect, no vibration or audio
There is a better profile tool but it was a part of the o2 customised GUI. However i find the three default settings do me fine
Thank you. Wat about having it on vibrate or off and the alarm still able to ring on full volume?
I think you cant do that, but as a kinda work arround you would need to put the phone in flight mode (turn off the phone function) but leave the sound on.
Just means you wont recieve any sms or calls untill you enble the phone again.
Try looking at Pocket Zen Phone, search the forums
I bought Pocket Zen Phone, it's a brilliant little app, and very cheap, so no excuse for not buying when it's so fairly priced.
so besides spb pocket plus and diary, what other apps is the best to use? I mean most popular and definitely a need by most of ppc users?
Mate that has to be the most commonly asked and most difficult question to answer - what you want/need to do with your device defines that.
As for a list, here is mine.
Hi guys,
I have a strange problem with the TYTN II. I put it to vibration using the HTC home ant it is OK, vibrating when somebody calls. Then suddenly, without me changing anything, it starts ringing as if I changed it to "Normal" profile. When I look at the HTC home I see it still has the "Vibrate" profile selected. I have to press on the "Vibrate" again to make it go to vibration again.
This strange thing happens randomly (or at least I cannot find what causes it), sometimes when I have used the phone, and sometimes even when I haven't.
Any ideas what the problem might be?
Thanks.
TheAvenger said:
Hi guys,
I have a strange problem with the TYTN II. I put it to vibration using the HTC home ant it is OK, vibrating when somebody calls. Then suddenly, without me changing anything, it starts ringing as if I changed it to "Normal" profile. When I look at the HTC home I see it still has the "Vibrate" profile selected. I have to press on the "Vibrate" again to make it go to vibration again.
This strange thing happens randomly (or at least I cannot find what causes it), sometimes when I have used the phone, and sometimes even when I haven't.
Any ideas what the problem might be?
Thanks.
Click to expand...
Click to collapse
Have you gone to Settings>Phone and set the Ring type to "vibrate and ring"?
You can also use Settings>Sounds & Notifications>Notifications and set "Phone: Incoming call" to "Vibrate and ring"
Hope this helps
Yes, I have all the settings. I change between the "Vibrate" and "Normal" profiles when I am in meetings (vibrate only) or generally (normal, ring + vibrate). The problem is that when I set the vibrate profile, the phone automatically rings sometimes, with sound, which I don't want in a meeting.
reminders?
This problem has just started to appear on my Kaiser. It seems to show up after a reminder appears. I have turned off all sounds and reminders except calendar reminders but vibrate still gets changed to ringing. I have also used Kaiser Tweak to change the defaults.
I don't what triggered this but it seemed to start when I uninstalled FlexMail 4 and then installed Flexmail 2007 but that may be coincidence.
A real problem in meetings or in a hearing where an official can really get upset over a ringing phone.
I still don't have a solution. I don't use FlexMail (any version) so I don't think this is the problem. It could be the calendar but I have not found any connection yet.
Work around
This is by no means perfect but it will prevent embarassing moments. Try recording a "silent" ring tone and using that for your ringer. Then all you miss are phone calls. They, of course, go to voice mail.
I had a similar issue, however it was in reverse, by once choosing the automatic profile in the HTC home.
Basically the automatic feature remains active after selecting it once, so after the reminder, even if it doesn't have time if your next block of time happens to be "free" it will revert it back to ringing.
Unfortunately I never found a solution and now have a new Kaiser, which I have avoided selecting it since getting the phone.
bluetooth too
Yesterday while on a call using a handsfree bluetooth device, a calendar reminder popped up and my bluetooth connection was dropped simultaneously. The call was not dropped and I was able to turn on the handfree connection again using the menu.
Which has led me to search for these type of problems. I found a thread that addresses a way to turn off push mail notifications. I understand the same "fix" works with calendar notifications.
[http://forum.xda-developers.com/showpost.php?p=1565104&postcount=8[/URL]
Ostinato said:
Yesterday while on a call using a handsfree bluetooth device, a calendar reminder popped up and my bluetooth connection was dropped simultaneously. The call was not dropped and I was able to turn on the handfree connection again using the menu.
Which has led me to search for these type of problems. I found a thread that addresses a way to turn off push mail notifications. I understand the same "fix" works with calendar notifications.
[http://forum.xda-developers.com/showpost.php?p=1565104&postcount=8[/URL]
Click to expand...
Click to collapse
Here is a thread on notifications.
http://forum.xda-developers.com/showthread.php?t=330872
I am now sure that the problem is connected with the calendar. It appears when I make some changes in an event (not always but in about 90% of the cases). I am synchronizing with Outlook and I think the problem appears when I change an event that was already synchronized. By "changing" I mean even dismissing the alarm when it goes off.
Any ideas what I could do?
A strange problem... In every incoming or outgoing call, my phone turns on the outer speaker (handsfree). So I need to turn off manually after call has started... Do you know any reason that is causing this?
no idea? :/
That happenned to me too, after i tweaked the phone (with Adv. Config. tool) to prevent screen from going to sleep during the call. And i never found a solution. Better you don't perform that tweak
Actually problem had occurred much later than advance config... I think it's all about answerkey disabler... But why only me... I am tired of hard reseting... Actually find something about phonespeaker in register but don't know which one should be changed
Solution for me: Audio Notes Touch - Settings - Speakerphone Off
Hi,
Good day, I have HTC Kaiser with official Windows 6.1.
My problems are :
1 ) Sometimes when my phone ring and I reject the call it doesn't reject it. it keeps ringing until the network disconnect this call. I solve this problem by soft-reset.
2 ) I need to change the default input method from Arabic-Keyboard to English-Keyboard. I did this some time ago but it return back to Arabic.
3 ) I sync my mobile at home and work. Every time I have to uncheck Contacts form sync menu and check it again to make sync work.
4 ) It's not a problem but I bought a bluetooth hands-free device and I would like to know what's the best way to use it, is it by turn device bluetooth on all the time. I need some tips a bout this.
Thanks a lot.
Hi,
Also, I remembered something I want my mobile to vibrate then ring but I think it's not doing this with all contacts sometime it's ring sometime it "vibrate then ring"
How can I solve this ?
Desigen said:
I have HTC Kaiser with official Windows 6.1.
My problems are :
1 ) Sometimes when my phone ring and I reject the call it doesn't reject it. it keeps ringing until the network disconnect this call. I solve this problem by soft-reset.
Click to expand...
Click to collapse
How are you attempting to reject the call? If you press the red hangup button when the call comes in but the phone keeps ringing and the call doesn't go through to your voicemail box, it may be a faulty button on the phone as that button should silence any incomming call.
2 ) I need to change the default input method from Arabic-Keyboard to English-Keyboard. I did this some time ago but it return back to Arabic.
Click to expand...
Click to collapse
If you have the HTC official ROM in World Wide English (WWE) that includes an English keyboard so if your settings aren't sticking, a hard reset may be the quickest way to solve the problem.
3 ) I sync my mobile at home and work. Every time I have to uncheck Contacts form sync menu and check it again to make sync work.
Click to expand...
Click to collapse
See if the above hard reset has any effect on this too. As I only use Activesync for file transfer, I cant help with that one.
4 ) It's not a problem but I bought a bluetooth hands-free device and I would like to know what's the best way to use it, is it by turn device bluetooth on all the time. I need some tips a bout this.
Click to expand...
Click to collapse
If you're expecting to receive calls through it all the time then you need to have the TyTN IIs bluetooth enabled all the time, how else is it going to communicate with the phone otherwise? To anticipate your next question, yes that uses lots of battery power so you may need a spare battery or two when you're out and about handsfree (or you could just use the wired headset that came with the phone for no additional battery drain).
As for the ring vs vibrate and ring, if you've setup a customised ring for certain individuals, that would explain why it behaves differently when a call comes in from one person compared to another. Are these sim contacts or outlook contacts?
Flying Kiwi said:
How are you attempting to reject the call? If you press the red hangup button when the call comes in but the phone keeps ringing and the call doesn't go through to your voicemail box, it may be a faulty button on the phone as that button should silence any incomming call.
Click to expand...
Click to collapse
Hi, when I want to reject the call I mute the phone by using the wheel button then press the red button "reject button" or touch the screen on "reject" word. None of the above work. They all failed. The phone not ringing but the call doesn't end. This happen from time to time. Not always.
Flying Kiwi said:
If you have the HTC official ROM in World Wide English (WWE) that includes an English keyboard so if your settings aren't sticking, a hard reset may be the quickest way to solve the problem.
Click to expand...
Click to collapse
Yes, my ROM is WWE and I installed FJE application and I want the default input method to be Keyboard.
Flying Kiwi said:
See if the above hard reset has any effect on this too. As I only use Activesync for file transfer, I cant help with that one.
Click to expand...
Click to collapse
No problem, I attach the two error I get
Flying Kiwi said:
As for the ring vs vibrate and ring, if you've setup a customised ring for certain individuals, that would explain why it behaves differently when a call comes in from one person compared to another. Are these sim contacts or outlook contacts?
Click to expand...
Click to collapse
I don't have any contact with special ringtone, all my contacts are Outlook.
Regards,
Hi!
I have got a peculiar porblem. Searched for someone with similar problem. Doesn'r seem to get one!
Whenever an incoming call is not answered in my touch viva, the volume of ringer increases automatically. If it is silent come to vibrate, if it is in vibrate then comes to Ringing mode. I cannot rely on silent mode anymore while in meetings.
I have Touch viva, Wm6.1 and few third party softwares installed but not anything related to sound or calling function related..
Please let me know if someone has already killed this bug!!
Regards and thanks!
Elmad.
i've never seen problem like this ... but anyway did ya try to see the settings of your sounds under start-settings-sounds there check the there ... or if didn't work try to flash ur rom again if u want 6.1 use the original from htc and if u want 6.5 there are alot of rom in the forum ... i use evolution as 6.5
elmad83 said:
Hi!
I have got a peculiar porblem. Searched for someone with similar problem. Doesn'r seem to get one!
Whenever an incoming call is not answered in my touch viva, the volume of ringer increases automatically. If it is silent come to vibrate, if it is in vibrate then comes to Ringing mode. I cannot rely on silent mode anymore while in meetings.
I have Touch viva, Wm6.1 and few third party softwares installed but not anything related to sound or calling function related..
Please let me know if someone has already killed this bug!!
Regards and thanks!
Elmad.
Click to expand...
Click to collapse
if uve installed SRS WOW HD,then u might have it as a problem.