Database Develop

Headless System for HTC TyTn II

Hey guys,
Well I wish to start a small project, where a computer should be able to access wireless internet (3G/HSDPA), WiFi, make calls, maybe use bluetooth, etc... Then I realized that my old HTC TyTn II has all that features... And its faster than the PC im gonne use.
Problem is my HTC screen cracked. So I cant see anything. Thats why I wondered if its possible to set up a Headless Linux System. With that in place I could prob traffic all the things I need via usbnet to the PC (like internet).
The purpose...
Well the reason for this project is a small computer in my car. I ripped out a old laptop and started mounting it in my car. The laptop will then be used to control the HTC, seeing as I doubt one can add external inputs on the HTC. My laptop also has a 10GB HDD and a working screen. So a combo of the two seems fair...
Any advice on this would be very appreciated!
Thanks in advance.
Xethron

I am about to do the same, replacing radio console.
I have some touchscreen lifebooks for this purpose, you can get one for
$100 $200 in miserable state, but to disassemble, who cares
idea was to change dpi in XP and replace explorer on startup, put a 8 button big startup window, with gps, media, video, internet
now you can hook up mobile by "Pocket Controller" it's a reverse remote desktop. you see mobile screen on pc
hope this get you some ideas

How insane is it that you have a computer that is slower then your phone?
There is a program to remote control your phone, I forget the name.

would it be the one I wrote in prev post
you can buy it at soti.net. working pretty good.

no, this one is free. I shall do some digging.
------- edit ---------
Cha Ching
http://www.mtux.com/
and a friend suggested this one.
http://www.julien-manici.com/

can't understand how could I have missed this when I was searching for one, and it's pretty old too. good tip, though too late for me.

Hey guys,
Thanks allot for the replies... I tried MyMobiler but it doesn't want to connect and seeing that I cant see the screen I am not sure whats happening... Appart from that you guys seem to be misunderstanding me totally!
Problem 1, MyMobiler only runs on windows, and I run Linux...
Problem 2, scripts cant be excecuted on the fly and communications between my two computers wont be possible with Windows Mobile.
Problem 3, Windows mobile crashes and my system will fail totally if my system ever crashes!
Besides, windows mobile have allot of junk I dont need. All I want is a simple Linux system on my HTC on which I can ssh in that will give no video output nor receive input from hardware, but that acts completely as a headless system.
It would also be cool if someone can tell me what hardware I can remove and how (Like the screen) in order to minimize power requirements...
So all I need is a version of Linux and a guide to install it so that all the functions work...
Hope this makes more sense...
Xethron

no Xethron, we didn't misunderstood you. I simply wrote what is my concept of laptop in car and ChumleyEX reacted further on my post too.
winmo is not stable, we all know that, but you should know too that linux is not so on winmo devices too. and that it is much more unstable.
It would be very nice indeed if there was no windows at all and everybody would be using linux, but if that would happen, linux would be the same commercial crap as is windows now, because that's what people are after. and that's the market. Nice fancy easy crap.
Though I encourage you to go with your linux idea, with a lot of effort, there could be perfect solution, but again, it would be much easier to just use what we've got.
If you would look around here, you'll see that on xda-dev you'll find a lot of solutions how to make a very tiny and fast winmo ROM. Stripped of all the crap. You can learn here how to strip even more, leaving only kernel + some drivers if you want.
What hw can you disconnect. I reckon you mean from pda. As you said screen backlight, that's a power eater, otherwise, devices could be turned ON/OFF from sw, which would by much safer/easier way. And you said you want to use them. instead, if you'll connect external antenna, that would spare you a lot of power while transmitting.
You should write more specific questions in order to get specific answers.
for example I am not getting it why you would want to spare 20mA consumption on some pda device and not better think about replacing HDD by CF card or ssd?
what would be your application requirements?
back for using pda in linux, it's in test state, you won't find any better working linux in pda as here. no one is hiding it nowhere. bluetooth is not working yet, phone functions are limited. wifi ok, but I doubt you could route it to PC.
as I doubt one can add external inputs on the HTC
Click to expand...
Click to collapse
yes you can. bluetooth can create virtual com ports. there are BT keyboards, pointing devices too. and generally anything else what uses com port could be made. even video can go out. (all just in windows of course)
for the pda remote programs:
you need a client on pda side. it's automatic simple installation. You may try soti controller it have trial period, with that one, you only need to press left soft key on kaiser to confirm client install. After you'll have this one workingt you would be able to see what you would need with the other one.

wow... that was a useful post!
The reason I want to use the phone is so that my PC can do all the things my phone can do... Reasons for this would be the following.
I come to my car. My phone syncs via bluetooth remotely to unlock my car. I get into car. Type password. Security system goes down... I stream songs via bluetooth to my pc which plays on the car speakers. I get out. Phone looses bluetooth connection and locks automatically. Someone comes and opens the door. PC picks up door is open and sets off an alarm. Phone calls me, and sends me a sms of the GPS location... If I dont respond it sends a email to all my friends. I connect to my car via ssh and keep track of its current position. depending on other connections I have made (Like you said bluetooth might be a good bet) i can controll parts of the car via ssh. Maybe install a fuel cutoff switch or whatever. With allot of effort I get my car back. Come home. It syncs wia wifi. New music gets uploaded... And my car is ready for day 2!
Simple direction of where I wanne go...
So now that you understand what I want to do... The linux on my HTC was a way for me to simply control the hardware and run a few small scripts... Wanne run some security scripts on the HTC instead of PC because it has the backup battery and the laptop will be running off the car battery...
I really don't care how we do this... But I know it must be possible to do all this somehow...
Let me know if you have some rad other ideas... As you can see I do not really want to "see" wats going on on my phone... It must be there like the PC of a car... Tell you the tempreture on some LCD. Let you know the water level is fine... But you dont see the PC... Thats my idea anyway...
Thanks for your help so far

I come to my car. My phone syncs via bluetooth remotely to unlock my car. I get into car. Type password. Security system goes down...
........
I get out. Phone looses bluetooth connection and locks automatically.
Click to expand...
Click to collapse
bluetooth is a secure way, but not very safe, I've been using 3 different Hsets, with 2 diff phones, it kept on loosing connection and some even pairing. other thing, you need to iniciate BT connection (not always with audio, but yes with activesync) that means no touch-less access. and the last is battery consuption. I've been reading long time ago about an application for garage doors based on wifi connections. they discussed BT as well, decided wifi would be much better, try google (open garage wifi) there is even an soft for pda for this.
but there are $50 - $80 ready applications, it's years out there, I reckon the last version would be very reliable.
There is option to put serial GPS, which you can get off ebay for $50 (here is 5pcs for $50 now, if you'll buy it, i'll get two off you)
http://cgi.ebay.com.au/5-LOT-Garmin...tem&pt=LH_DefaultDomain_0&hash=item35a9b4b768
and the application:
http://www.bladox.com/products.php?lang=en
and I saw other brand with the same thing too.
with this bladox, you can simply set that if you take out key and open & close drivers doors it would lock with timer (that's option what most of available classic alarms too) or a button to lock with timer to leave could be hooked up.
you can set plenty of outputs and inputs, freely configurable. e.g remotely shut the engine, horn the horn, knock on window function...
consuption would be around 20mA on charging mobile. with car battery 100mA is a concern and 200mA permanent current is an issue. (all time running PC = 2A = 2000mA = NO WAY)
locking-unlocking could be done through ring (without answering) or sms.
I would say ring is pretty safe, as who would go through trouble of tempering with gsm switch control to fake your caller ID? (+ who would know about you have this setup + know your car phene num and your phone number)
and if a friend would call you he forget a wallet in your car, you don't need to get up of bed to unlock, just dial.
I stream songs via bluetooth to my pc which plays on the car speakers.
Click to expand...
Click to collapse
audio quality isn't 100% plus maybe switching/pairing and your mobile needs to be on a charge for playing longer through BT -> no wireless.
use your phone in a disk drive mode and play from PC in car OR
your pda in car through SD to USB adapter (TwinMOS GoGo Egg Card Reader)
there would be limit 64GB for sure, maybe 2GB limit (is it SDHC compatible?)
I don't know nothing about it, only that it exists
Someone comes and opens the door. PC picks up door is open and sets off an alarm. Phone calls me, and sends me a sms of the GPS location.
Click to expand...
Click to collapse
..
bladox can do + power on your PC which would start streaming video from web cam, you can call to car and tell the guy how he looks like and where he's going and that police is already waiting there.
It must be there like the PC of a car... Tell you the tempreture on some LCD. Let you know the water level is fine...
Click to expand...
Click to collapse
ha, stop dreaming get OBD II and live it!
connect your car engine through cable OR WIFI!! to PC or PDA!! and look at all temperatures, compression levels, exhaust system, error msgs, and if you like make it active and let your car know you feel like having fun now, or maybe more econo mode other time.
OBD II - all cars since yr 96 on US market, $50 -$100 for interface (soft free)

controlling HDMI

As stated in the (www .blogtalkradio .com/motodev) Q&A session yesterday with Motorola about the Droid X, in answer to the question asked at the 29:00 mark,
"The only time that we are enabling the HDMI driver on the device is when you are in the gallery mode. [...] The HDMI driver is not active any time outside the gallery," where the "gallery mode" is their included photo/video viewer.
I'm wondering how true that is...
(www .pcmag .com/article2/0,2817,2365630,00.asp ) PCMag's review stated that the youtube player and blockbuster player were not able to use the hdmi out at all.
As seen in (forum.xda-developers.com/showthread.php?t=703111 ) this thread the evo 4g, which also has hdmi out, is capable of allowing any app that uses VideoView to utilize that output, but that's supported by the phone maker.
Will that usability be true on the droid x?
Could we figure out a way to bypass any limitations Motorola includes, and maybe even send (an upscaled version of) the main screen through the hdmi (not just video but anything we could put on the phone's screen)?

I was just at a motorola event and we were able to run nfl mobile through the hdmi.
Yes the tv was in an ice sculpture and yes it was connected to a droid x via the hdmi cable
Sent from my ADR6300 using XDA App

That's great news, thanks for letting us know!
The more apps with handshakes to the hdmi-out we have, the better for us to get it working completely openly
The whole media-center-and-phone-in-my-pocket is just a great idea imho...
With the hdmi out we could:
put any videos and pictures from any source up on your home tv
connect it to the projector at work and give presentations
go with a few bluetooth controllers to your friend's house and play multiplayer (even online) games on their tv with minimal cords to deal with
maybe even video-chat would be possible if you set up the phone with the camera facing out in front of the tv
... ok, that last one sounds like a pretty lame way to get video-chat, but it would save on having to have a computer/monitor/webcam when you wanted to
Of course this is all far into the future stages of development on the phone, but I'd rather create buzz and excitement to build up a developer and user base

Talked to a moto rep, said it might have been a beta device as licensing is what will prevent this thing from being turned on when it hits consumers hands. At least we know it can be done.
Sent from my DROIDX using XDA App

no fun, i'm not much of a C programmer, but if it's just enabling or disabling the driver, I guess it comes down to the security on the phone. If you go into root, I suppose we should be able to start the driver. The only thing I fear is if the driver is signed and only a signed application can access it, then I think we might be SOL

I'm not particularly worried... if we get access to enough apps that use the hdmi driver, we should be able to document enough of the method.
I believe while the hardware can reject unsigned versions of the OS (roms), most apps are self-signed (see developer. android. com/guide/publishing/app-signing.html) so that shouldn't be a problem. We just have to figure out which hoops to jump through (following the programs that use hdmi) to get it to work. They'd have to leave the hoops pretty wide open or else risk the need of updating the thing every time a new app is released that needs to get through.

This is a mixed bag here. The reason why Motorola limited the hdmi driver is likely so they didn't have to put a fps cap on the droid x like htc put on the evo.
This is pure speculation here but I would imagine the way that the evo devs are going to "truly" overcome the fps cap is to mimic the droid x behavior of toggling on and off the hdmi drivers so that the evo can access up to 60 fps.
You guys are on the other end of the boat where by default your fps won't be artificially capped, but you likely won't have full access to the hdmi drivers at first.
I think the sweet spot for both phones is finding a happy medium where we can toggle the hdmi drivers at will.

Any news on this? I would really like to get rockplayer and youtube working through hdmi. In fact, I would like to get the entire OS through HDMI and possibly a bluetooth keyboard and mouse working so I can use it as a little media center pc.

2 way control
I would lime to see this pushed to.the level of controlling the phone through an hdmi touchscreen.

I thought we would be able to see pandora and other apps through the hdmi...This sucks the way it is...also does anyone think the sound is terrible through the hdmi?

There is no point int he HDMi at all if you can only use it for your pictures and your videos from the phone's camera.
They need to make it show what you see on the phone, but on the screen
I remember there was a windows mobiel program that popped up a small window on your desktop that let you see your phone's screen and interact with it on your monitor when connected through usb
anything like this for android?

sp1kez said:
There is no point int he HDMi at all if you can only use it for your pictures and your videos from the phone's camera.
They need to make it show what you see on the phone, but on the screen
I remember there was a windows mobiel program that popped up a small window on your desktop that let you see your phone's screen and interact with it on your monitor when connected through usb
anything like this for android?
Click to expand...
Click to collapse
NO, the hdmi dock is a half ass design. For the $, it should do everything. MOTO/VZ dropped the ball on this. Hopefully they will open this up with a sw update.

Update: "Real HDMI" in the market
http://forum.xda-developers.com/showthread.php?t=769990&highlight=control+hdmi

Hi,
I'm pretty new to Android development. So my understanding after reading a couple threads here is that HDMI access on the stock Droid X is limited to the gallery only, is that right? And the point of the "Real HDMI" app is that it will automatically redirect all output to the phone's display through HDMI, right? So no API exists which gives programmatic control over the HDMI port? That's a shame if so.
Do any of the Android devices allow easier HDMI port control or do we need these kinds of work arounds for all of them?
Thank you very much for any information anyone can provide.

Sorry to be a pest, but can anybody answer my questions? Should I consider posting somehwere else?
Thanks again.

commie64 said:
Sorry to be a pest, but can anybody answer my questions? Should I consider posting somehwere else?
Thanks again.
Click to expand...
Click to collapse
Maybe try posting in the Real HDMI thread over at DroidXForums.com because username GMAN (who made real hdmi) has a thread there. I'm sure his knowledge of the subject is pretty extensive.

May I ask a non-nook Question?

I want to set up my PC as a TV and DVR, what's the best way to do this? I have a cable outlet right beside the PC, I know I could get a TV Tuner card but I know nothing about them at all and there are so many it's confusing. Hauppage(sp?) seems to be the most popular but are they any good? Are there any questions I should be asking myself before I chose? Any help would be much appreciated. Is there a better option altogether? I've searched the internet but it's basically an information overload, no good guides can be found for all the 5 year old junk

tuner you get depends on what software (dvr software) you want to run, what you want to do, and how fast your computer is.
things to know:
some with one tuner and some with 2
some with only OTA and some with QAM (unencrypted cable), some do both
hauppauge has pci/pci-e cards as well as usb
HDhomerun has several models, 2 tuner OTA/QAM, 4* tuner cable card, etc
Ceton has a 4, and a 6?, tuner card
some of these have hardware encoders, some dont (slower computers will need encoding otherwise it will be choppy, audio dropouts)

You should first figure out exactly what type of signal is coming in on that cable. Does your area still have analog cable service (my area does, but I think that's getting more scarce), or is it digital only? Are there any clear-QAM channels (which are usually just the local networks) or is it all encrypted? If it's only digital and encrypted channels that you're interested in, then you need something that can take a CableCARD.
After that, it's all about what software you want to run and how many tuners you require.

You may be better off just using a combo of Netflix, Hulu, Amazon Prime Instant Video and Bittorrent.
Otherwise you haven't given us any of your specs to be able you help you out. What type of PC do you have? Windows/Linux/Mac... Processor/RAM/HD, also like others have noted are you going for Over the Air signal, analog or Digital Cable, standard def or HD. Are you going to be using a set top box or going for a cable card(very expensive option). Give us as much detail as possible if you want competent answers.

As for using your PC as a TV and PVR, I'd recommend using XBMC to turn it into a Home Theater PC (HTPC). The site, LifeHacker, does an XBMC/HTPC guide every few months. You would still need to buy hardware like a TV tuner but XBMC does a lot on the software end.
Also, if you use XBMC, you can use your Nook Color (assuming you at least have rooted it and have access to the Andoid Market) to control the XBMC software via the XBMC remote app.
Here is a guide that lifehacker did. It's a little old but the basics are still relevant and correct. http*://lifehacker.*com/5536963/the-ultimate-start-to-finish-guide-to-your-xbmc-media-center (remove the asterisks)

What everyone else has said -- need more info on what you have, also what budget, and what cable setup.
I have an HTPC set up but it's for media streaming, not dvr recording.
One forum I found very helpful is the AVS forum (search in google), they have a sub-forum dedicated entirely to HTPCs.

Sorry for the lack on info didn't know that my PC specs mattered all that much. I am running:
Vista Home Premium, 64bit
Intel Core2 Quad CPU (Q9300 @2.5ghz)
4GB RAM
Nvidia GeForce GT240
Appx. 600gb ofhard-drive space plus a 500gb permanent external USB. I can add more HD space if it becomes a problem.
Not sure if there is any other system info you guys need.
As for my cable I dunno for sure what signal I have, I have COMCAST if that helps anyone. Mainly I want this for recording sports. I can't always watch them live and it'd be nice to DVR them for later. I'd also use it for shows, but those I can always watch online later. Can't really watch sports later though. And I'd also like to be able to just normally watch TV on my computer. I'd like to be able to do something on monitor one while the other plays live TV. Sports or whatever.
Also, to this:
Are you going to be using a set top box or going for a cable card(very expensive option).
Click to expand...
Click to collapse
I am not sure what you mean. I was thinking you get the TV Tuner, install it in your PCIE slot, and watch TV on the PC. Do you need another device?

Landara said:
I am not sure what you mean. I was thinking you get the TV Tuner, install it in your PCIE slot, and watch TV on the PC. Do you need another device?
Click to expand...
Click to collapse
A basic TV tuner will only be able to pick up Over The Air signals and basic cable(very limited channel selection). If you want to be able to watch digital cable you'll need either a set top box or a cable card and cable card reader(like this one).
some nice basic tv tuners
http://www.newegg.com/Product/Product.aspx?Item=N82E16815116028
http://www.newegg.com/Product/Product.aspx?Item=N82E16815100049
http://www.newegg.com/Product/Product.aspx?Item=N82E16815116015
I believe you have Windows Media Center included with your Windows version, it's probably going to be your best option for software.

[Q] Hardware / Framework advice for project (Smartwatch-like thing for motorcycle)

Hey Guys
First of all: I realize that this is a rather long text, so I appreciate the effort of everyone who is going to read it!
Also, I asked a questions about 2 weeks ago, which was related to this topic, but was very specific about android wear (which I gave up on since then!).
So, actual post:
I want to build, or already am building an informational system for my motorcycle.
As the result of my work, I imagine a display (about 7 inches) in the dash of my motorcycle. It shall display information from my Smartphone (for example notifications about incoming calls etc.) as well as giving me the possibility to control the music on the smartphone (Android 5.1).
Also, I want to display further information, like speed, average speed, altitude etc. (hope you got the idea, basically just an advanced trip computer).
I started developing something, but ran into issues. I will explain my two concepts or ideas I had so far and explain, what the issues were I ran into. I then hope, that somebody here has a solution for my problem (which includes recommending hard- and software).
Firstly about my skills: I am experienced in programming "low level hardware", like Atmel's AVR Series (in plain old C) and developing the associated hardware for it. Also making custom pcb's at home isn't a problem for me, as long it doesn't come to some fancy BGA or SMD packages
On the programming side I am experienced the most in Java (and Android, which is basically Java of course). I know also C# and the .NET framework.
But I am willing to learn something new
The two ideas I had so far differed on the way how I wanted to let the raspberry pi (which I wanted to place in the cockpit) communicate with the smartphone.
In both concepts, I planned to have a raspberry pi with attached display in the cockpit on which I wanted to run a JavaFX application (already started programing). This application would then communicate with the smartphone over:
Idea 1: Java serialization:
I wanted to communicate over command objects. So for example I'd have an object for asking the altitude from the smartphone.
I'd then serialize this command object on the pi's side and deserialize on the smartphone. This isn't a problem, because there's java on either side (already got that piece working).
The smartphone would, after receiving and deserializing the object, get the actual altitude from the GPS sensor, pack the result in an answer-object, serialize it and send it back to the pi.
The issues I ran into were the following:
-Java Bluetooth library: I wasn't able to find a good, up-to-date, java library for communicate over Bluetooth in java. I then stuck to RXTX Library which did the job, but I always had the feeling of doing something "not so good". In particular I didn't want to just write on a COM-Port (which is emulated from the Bluetooth-module), because I had the feeling that COM-Ports may change after reboots if the OS feels like it, and I didn't want to build something which needed constant "tinkering". Also, writing to COM-Ports in 2015 just feels wrong, but this may be my personal problem
Idea 2: HTTP and Web Sockets
The basic idea was to have a webserver running on the smartphone and offering a REST-like API which I could access from the pi.
I also got this concept working, like so:
By using the NanoHTTPD library (from github) I was able to start a webserver on the android device. When then someone issued a POST-request on, for example, <IP>:<port>/api/music/next, the WebServer would receive this request and switch to the next song.
Actualizing data on the pi which changes often, for example the altitude, would have been achieved by using a WebSocket connection between the Java-App on the pi and the android webserver (which I also got to work).
I figured out that it would be a power consumption problem to let the smartphone offer a wifi hotspot (I don't want to have to connect the smartphone to cables on the motorcycle), so I decided to let the pi start a wifi access point (which isn't a power problem, because the pi is connected to on-board-power of the motorcycle).
However I then realized that the smartphone won't connect to an access point which doesn't offer internet access but only LAN-access.
And even if there was a way to force the smartphone to let it connect anyways, it isn't guaranteed that this will work too on future devices. And: The whole notification-stuff would have been needless, because as long as the smartphone is connected to a "dead-end wifi", it wouldn't receive emails or whatsapp-messages.
Idea 3: Using Bluetooth low energy:
It seems like the new, modern way, to let devices communicate over Bluetooth is to use Bluetooth low energy (BLE). (But I never worked with it before!).
However, there seems to be little to no support on raspberry pi for it, and it seems to be impossible to find a library for java which helps in using BLE. (If anyone knows one, please let me know).
I then thought about replacing the raspberry pi with an android board, because android has support for BLE. But I wasn't able to find a board which is supported from android 5.1+ and offers support for BLE. Even the Odroid-boards don't seem to support android >4.4 and BLE.
Summary:
In general I liked the second and third option much better. It seemed to be the the more versatile, modern way. The first way felt a bit like a hack.
However I found those problems I presented above, and until now, I couldn't think of a way around it.
If anyone here:
1) Solved this problem already
2) Knows a really good, NON-HACKY, community supported, Java (BLE) Bluetooth library
3) Knows a language or framework which would be well suited to solve the problem
4) Has another good idea how to solve it
Please let me know!
I just want to build something sophisticated, (which I could maybe make an open source project out of it) which isn't hacky.
I mean, the problem has to be solvable, look at the Pebble smartwatch. They also solved it without android wear.
I really want to emphasise that this is an open question. I am not limited / fixed on Java, Raspberry pi or anything.
I those have two requirements.
1) I don't want to connect the smartphone to a cable, either for data or for power
2) The solution needs to be something power saving, so no hotspot on the android device
3) Non-hacky, sophisticated solution
Best regards
Me =)
PS: As English isn't my native language, I maybe put some sentences wrong or wasn't able to express something clearly and unambiguous.
Please feel free to ask, I'd be pleased to clear any questions!

Any updates?
Hi!
I know this is an old thread, but I'm struggling with a similar issue - except I want to use it for roadcycling. Did you have any luck with your project?
All the best
Marius

Making the most of bluetooth - the pc connection

So I have xt894 running cm12. I have a windows 7 pc.
What do I need to do to be doing what I could be doing?
Please open my eyes.
Sent from my XT894 using Tapatalk

What is it you expect that you could be doing? :v
The last I checked, CM12 - PC works fine over bluetooth, though you'll need a decent bluetooth adapter (that comes with its own software), as Windows' bluetooth stack doesn't seem to like the $0.99 CSR-based adapters you can buy off eBay.
Alternatively, I guess you could buy a copy of Bluesoleil, since it replaces the Windows stack and makes said cheap adapters properly functional. Might be expensive, though.

i would like to have my pc lock when i walk away.
i would like music on my phone to be played on my computer speakers while within range.
I want my droid 4 to act as a mouse and keyboard.
I want it to be connected to multiple bluetooth enabled computers/devices and be able to select which device to output to using a menu on the droid.
games on my phone with a controller, in addition to other features yet thought of.
Ultimately, this is a very functional device.
have a great day.
thank you for your well formed replies.

Sorry for the late reply, I've been pretty busy with work this week.
I'm not personally familiar with any programs that do this, but it looks like this is what you're looking for.
To pipe music through to your speakers, you'll need an adapter that supports A2DP, or more ideally for sound quality, aptX. I would guess even the cheap adapters support A2DP, since it's older. The Windows bluetooth stack doesn't appear to offer any audio functionality with cheap CSR-based adapters (which more dollar ebay adapters are), but they might be A2DP-capable at least.
Even with the Windows bluetooth stack, you can use your phone as a keyboard/mouse. I used AndroMouse for this purpose a while back, and it (mostly) worked, but there are many apps that should work as well. Most if not all will require you to install a client program on your PC and run it whenever you want to connect.
As with the above, even the Windows stack allows using your phone as a controller; they all use the common Remote Control bluetooth profile. I tried out Ultimate Gamepad, and it seemed to work fine. I only tried playing a Gameboy game with it though, I'm not sure about its responsiveness for more demanding games...
If you shop a bit on ebay, some adapters include a disc with an older version of Bluesoleil, and others might come with a copy of CSR Harmony (they'll have a disc labeled "CSR 4.0" pictured, which could be anything really). If you're willing to spend $10 or so, you can usually find a few listings with adapters by IOGEAR, Insignia, etc other house brands which possibly have up-to-date software you can grab off their sites.
Cheaper than outright buying Bluesoleil, anyway.