Related
Good Morning all,
Hope everyone is well. I realise that I am probably repeating a post somewhere and apologise profusely for that.
However my request is quite urgent. I have my phone flashed with Dutty's 4.1 using the step by step guide to update radio and ROM etc etc.
My touchscreen has now started playing silly buggars and as such tomorrow it gets picked up by UPS UK to disappear off to be looked at. Obviously I do not think they will take it to well if it still has duttys on there
So just so I make sure I get eveything right.... can someone just drop me a link to the correct files for a stock flash back to the way things should be.
Thank you thank you thank you thank you thank you thank you
Jody
To add an update, the boot loader screen shows:
BLAC100 32M
SPL-1.56.OliNex
Micro-Blackstone (LED) v6
Thought this might help in finding out how much work to stock?
I Think u need the original rom... or a htc one from the website?? ... can it not be downloaded from the htc website?? i may be wrong
I do but also need to make sure I do an original spl and radio as well
first off go to htc.com and download the romupgrade thats on that side (ive non is on the side check the wiki for youre countryrom)
then flash that one and se ive radio comes with it
ive not flash radio 13.**.**.**
then from the hard spl thread there a tut how t make youre spl stock again and youre finished
This is the last official ROM with 1.56 spl and 1.13 radio
h..p://rapidshare.com/files/231263089/-HTC_Touch_HD-MR_2009-RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.34_1.13.25.24_Ship.exe
Ok, thanks for all your assistance. Just qiuck one, Once I have done all this how can I check it has all worked. Obviously the boot loader shows the SPL, and the ROM is whatever installed. Where will it display the current radio so I can check that too?
J7ody said:
Ok, thanks for all your assistance. Just qiuck one, Once I have done all this how can I check it has all worked. Obviously the boot loader shows the SPL, and the ROM is whatever installed. Where will it display the current radio so I can check that too?
Click to expand...
Click to collapse
At boot it shows, just restart your device and look at the red text in the bottom right corner, there it will show your current radio version.
Could also see it in device info when the device is on but dunno if you still can considering you need to return it.
gl.
Thanks to all help, radio is now reading stock as is the 1.56 spl all installed from latest ROM from HTC so also stock.
UPS collect tomorrow and with any luck they will return a working touchscreen and I can continue where I left off
anyone noticed lots of these requests....? where they flash then the touch screen stops working?
wtf......
I noticed these threads after the 1.17 radio but some users haven't upgraded to that radio and it happend to them.
i'm looking to stay on my rom until something more is found out about this.....
Curious????
imranmaz said:
anyone noticed lots of these requests....? where they flash then the touch screen stops working?
wtf......
I noticed these threads after the 1.17 radio but some users haven't upgraded to that radio and it happend to them.
i'm looking to stay on my rom until something more is found out about this.....
Click to expand...
Click to collapse
I also have read a couple of these help requests and the same problem, but what could it be, is it the windows mobile 6.5 builds that are doing this (not blaming the chef's in anyway), or some conflict with the spl... have to investigate this more...
imranmaz said:
anyone noticed lots of these requests....? where they flash then the touch screen stops working?
wtf......
I noticed these threads after the 1.17 radio but some users haven't upgraded to that radio and it happend to them.
i'm looking to stay on my rom until something more is found out about this.....
Click to expand...
Click to collapse
I have also noticed the very same, after changing the rom people are having screen problems! Why is that?
Returning to Stock for repair! to having screen problems after changing the rom
J7ody said:
Good Morning all,
Hope everyone is well. I realise that I am probably repeating a post somewhere and apologise profusely for that.
However my request is quite urgent. I have my phone flashed with Dutty's 4.1 using the step by step guide to update radio and ROM etc etc.
My touchscreen has now started playing silly buggars and as such tomorrow it gets picked up by UPS UK to disappear off to be looked at. Obviously I do not think they will take it to well if it still has duttys on there
So just so I make sure I get eveything right.... can someone just drop me a link to the correct files for a stock flash back to the way things should be.
Thank you thank you thank you thank you thank you thank you
Jody
Click to expand...
Click to collapse
dataSaMm said:
I have also noticed the very same, after changing the rom people are having screen problems! Why is that?
Click to expand...
Click to collapse
Hi, can someone (Admin) change the title of this thread from Returning to Stock for repair! to Having screen problems after changing the rom?
I think the first is solved and now we have this new problem in hand.
best regards
+1
i've had the problem with a cooked french rom (Pyrana V17C). My screen started to freeze for a few seconds. During that time, when I put the finger on the screen and slide, the screen follows the move but it comes back to where it first was, ant the move is finally not taken in consideration ... it looks like the screen is an elastic...
So it did it sometimes and it lasted a few seconds first, and then, a couple af days later, it was more often, and I had to soft reset everytime, and yesterday, I finally had to hard reset to take back the hand, and the bug came back more quickly. So I installed the latest release of this rom this morning and everything seems to be stable since a couple of hour. If it comes back I'll try another rom, but if someone can find a way to set this, that would be perfect ...
J7ody said:
Thanks to all help, radio is now reading stock as is the 1.56 spl all installed from latest ROM from HTC so also stock.
UPS collect tomorrow and with any luck they will return a working touchscreen and I can continue where I left off
Click to expand...
Click to collapse
You've found your solution to original query and returned device to stock rom & SPL. Thread has now run its purpose
Thread closed
Hello out there.....
First of all i have to say THX to all these people which are really willing to help every1 with their great tutorials. Ive used alot of them already. Thanks.
And i have to say sorry for my english language, due Im german and i left school behind long time ago. I'm really taken pains to write this comment.
Now, in my case ive tried to restore my device (Xperia X1i) to OEM status step by step as its shown in this thread.
My worst issue is that my touchscreen aint work anymore after i flashed a custom ROM and that i got stock at the point where the ROM wants to configure the OS like "Tap the screen to continue with configuration".
Ive tried to flash way too much ROMs using HardSPL but the touchscreen wont let me do anything - no reaction.
So how can I restore the bootloader (SPL) on my device, when my touchscreen aint work? How can I take the following step without any working ROM ?
sirsycho said:
12. Run SSPL.KAIS.exe from your phone (make sure you do this on your actual device and not your PC)
Click to expand...
Click to collapse
I do not know what I did wrong, that the screen wont react anymore, but im sure that the SPL is the cause for this disaster.
I'm really desperate couz i already have sent the device to the SE Support, where they told me that there is an "extraneous" on my device although ive flashed the Stock ROM firstly... there was still something that bothered them...
After i got the device back the touchscreen worked again as funny, allthough the support did nothing on the device as they said in the delivery.
A bit skeptical but with alot of happiness i kept on flashing some ROMs after that.
Now, after i found a good ROM and kept this one on my device for some days the screen doesnt work again.....
This is what my bootloader says right now
Code:
KOVS110
SPL-0.72.OliNex
MicroP1-787
MicroP2-707
....seems like the HardSPL is still there......
Honistly i had to apollogize (maybe too late) that this part of using a cellphone (flashing a ROM using HardSPL etc.) is a big fish and that ive underrated it. Now i have a 400$-Device which aint work anymore
Ive read like all Tutorials here at xda-devs containing something about flashing a ROM or informations about SPLs; tried everything
I feel like im lost and fu**ed right now....
Is there any1 can help me with my problem?
Hopefully there is.....i pray for him
first flash a stock rom
then just run the hard-spl exe, and replace the ruu_signed.nbh file
why are you trying to use kaiser spl?
use the things found in the hardspl sticky in the xperia section
Wrong Tutorial
You're using tutorial for wrong device (HTC Kaiser)
The correct tutorial is in first post (extra how to: how to restore Stock SPL for warranty reasons.)
http://forum.xda-developers.com/showthread.php?t=431218
But before restoring original hardspl you should flash with original rom found in this thread http://forum.xda-developers.com/showthread.php?t=475482
wow thanks for your answers !!
i never thought ill get response.
Its really weird that i havnt found that tut before bcuz i was looking through whole board.
I will try do that tomorrow.
I hope that it will work then. Don't wanna pay 300$ for a new device
Else there is mtty to restore the bootloader
Aight i have done the steps showing in the tutorial.
1. I have flashed teh Stock ROM (R2A german - Vodafone)
2. I've used the RUU with the stockSPL given in that post.
Now my tricolour screen shows the following
Code:
KOVS110
SPL-0.72.0000
MicroP1-787
MicroP2-707
This is what it shall looks like OliNex said.
I hope this is all i had to do, to make use of my device's guarantee, cuz the touchscreen still doesnt work
Seems like i really have to send my Xperia to the Support again (now hopefully with a ROM + SPL they wont reject)
But if i send my device with "extraneous" again i have to pay another 15€ just for let them do a costs estimate -.-
I would like to get a reply before i make use of the support again.
Thanks for all your help
Glad to hear recovering to stock rom + spl worked out.
Your touchscreen doesn't work when you have booted up windows?
If that's correct then I suggest to send in the device for service. Although
it might not help I suggest updating your device with SE updating service (SEUS) first.
After the flash remove the battery for 10 seconds, then turn it on.
Hope it helps and otherwise servicing the device is free of charges
Haha!
That's what im doing right now, using SEUS
Thanks for the tip with the battery but i already tried that way too often
Edit:
Ok, touchscreen still aint work....
Time to contact the support...at 11:45 PM **WOOT
nvm....Ill wait till tomorrow
gn8 and thanks for helping me with my issue ^^
a few days ago I returned my silver X1 for the same issue, my touch screen (digitizer) doesn't work. Then right in front of SE support person, he justed took out the battery and rebooted. Then it worked. The thing is, I did the same thing several times earlier that day and it did NOT worked. I am worrying of getting the same problem again and I only have until november 30th until my 1 year warranty expires. I haven't tried any cooked roms and it is because of warranty purpose. Altough I'm not new to custom roms since I own an Alpine and a Prophet. I've been here for some time now.
The thing that holds me back testing cooked roms on my Xperia is the aftermath if in case my device goes half-dead. I almost always read the restoring on to official roms everytime I get here, but still the thousand dollar spent on my phone's tag price comes with a fear of who's gonna rescue if my phone won't work. And to add that spare parts aren't available here as of the moment. And yes I'm eager and very curious about almost everyone saying cooked 6.5 is faster than stock roms but though I haven't tested it I have to disagree for now on my case basis.
First, my Xperia doesn't come with a carrier lock. It's locally called "open line" in my country I guess technically called debranding. Then my phone has the generic r3a rom via seus I think it's generic uk. Lastly, for some reasons, the touchflo 3d doesn't work with my device I've tried it since r1 firmware time. Some response told me to unlock-debrand my phone first but I dont have to since it isn't locked. Still installing tf3d makes my phone hang, doesn't uninstall, doesn't show in the themes list if installed as a theme, and doesn't let me have another panel since it always stay as tf3d whenever I choose another one. And it is very unstable in my device. These happened even if I install it as a panel.
I feel handsets here are faster than handsets that are locked by a carrier so I'm thinking again since for now, my Xperia works for me as stock as it is.
Hello guys,
I am having serious issues with my HD, and the best solution is to send it back to be repaird, or trow it away...
F.Y.I. the problem is screen going black, or without backlight, or not starting quick, and continuing black.. or the infamous "MICROP FIRMWARE MISMATCH"
To make it a bit worse, I bought it second hand, and I have to prey that the phone is not 2 years old... (guess to be seing in the sticker info on stock number, or part number...).
So... I had a lot of fun in this forum, installing HSPL, and diferent roms.., and guess.., I have to put everything back to original to try to get it fixed.
First, I will show what the info on the Phone is..
R 1.13.25.24
G 52.62.25.34U
D 1.56.47501
BLACK100 32M
SPL-1.56 OLINEX
My questions (and I guess lots of people's question too) are:
1) How to downgrade my SPL to an "official" one
2) Which one could that be (number)
3) Which official rom to use (number), to make it matching SPL.. MUST BE AN WM 6.1
4) Is my radio version "stock"?
5) can I flash Stock rom, and then AFTER stock SPL? to avoid to have to use USPL to flash stock rom after..
6) Does the Stock rom comes with its own radio?
Requests
1)Dummie capable help
2)Where to find stock SPL'S for this phone.
3)Some link to tutorials HOW TO...flash stock SPL
4)Link to downloads to WM 6.1 stock rom (HTC Support doesn,t have them, only upgrades). Dutch should be the languaje, but if not, WWE should do...
5) Where to get some luck...
I know its a lot what I am asking, but, after hours of looking arround, and lots of tabs on my explorer, I am just confused..., and believe that many people are in the same situation.
I have ony seeing upgrade guides, but not yet an downgrade guide sticking nowhere, and ways of dealing with manufacturer due hardware problems, and I mean, the way to set your phone back to standar, or the proper way to back up everything before we make it "really user friendly", which, acording to manufacturer, is ILEGAL,
Everybody's reply's will be trully apreciated
Well, I found the "STOCK" rom on the HTC site.
It has already the radio included.
RUU_BlackStone_HTC_NLD_1.56.404.1_Radio_52.62.25.34_1.13.25.24_Ship
For everybody's info, the only way to download it, is by filling the Serial number of the phone (behind the battery) in the HTC Website(support).
It was an unlocked phone, so, I choosed EU version, and after filling the serial number, gave me automatic.. Dutch languaje (good enough to send it to Service).
So, I guess that if you want to change the lenguaje of your phone on an official rom, and is not possible with your phone serial, you will just have to request it.
I just flashed it with SPL 1.56 OLINEX, and he just won't start..., just have to let him rest couple of hours, or try to start it tomorrow (vibrates after 1 minute, and wont start), so, If everything goes ok, .. stock SPL, and "send it back"
This might be helpful: http://forum.xda-developers.com/showthread.php?t=431217.
First you have to sure what was your original SPL version, and Radio version.
Good luck.
I flashed thesame rom when I had to send my phone back to claim warranty. I use spl 1.14. My phone was repaired for free so I think I did it right ^^
edit: just follow the guide philrom posted anf you'll be fine . The stock rom you flashed already includes a (stock) radio, so after flashing spl 1.14 our phone is good to go
1.14... and will be ok for warranty.... so, 1.14 will be
Apreciate the info, let's hope that service will do their job, so I can go back to WM 6.5!! , and off course custom roms..
Again, tks. I will let you know how everithing turned out.
Juan
Hi People
I am not sure whether this is the correct section, but it is still ROM related.
Recently, my phone does not want to wake up sometimes...I press the button and the screen remains black..after few minutes it goes back on but is unresponsive..I have to reset my phone...this is very annoying as for example my alarm also did not sound becuase of this - I was almost late for work...
In conclusion, my 560 EUR phone is not reliable anymore and is still under warranty - I want to have it replaced.
That is where my question comes - How can I completely virginize my phone?
I always used USPL while flashing...
I will perform Task29 and should I flash some stock ROM before I go to give it to service?
If so, what is the appropriate stock ROM for my phone?
What else should I be aware of when virginizing?
Please help me guys, I really want my phone fixed or replaced - it could be the motherboard causing this and I dont want my phone to die...
THANK YOU!!
Sopis said:
Hi People
I am not sure whether this is the correct section, but it is still ROM related.
Recently, my phone does not want to wake up sometimes...I press the button and the screen remains black..after few minutes it goes back on but is unresponsive..I have to reset my phone...this is very annoying as for example my alarm also did not sound becuase of this - I was almost late for work...
In conclusion, my 560 EUR phone is not reliable anymore and is still under warranty - I want to have it replaced.
That is where my question comes - How can I completely virginize my phone?
I always used USPL while flashing...
I will perform Task29 and should I flash some stock ROM before I go to give it to service?
If so, what is the appropriate stock ROM for my phone?
What else should I be aware of when virginizing?
Please help me guys, I really want my phone fixed or replaced - it could be the motherboard causing this and I dont want my phone to die...
THANK YOU!!
Click to expand...
Click to collapse
Dear friend,
first let's know what ROM have you installed on your device? I'm sure the problems that you've mentioned are not hardware problems, and in fact they are related to the ROM, since I have the same problem sometimes with some ROMs and some application. I had problem with alarm clock several times, just after flashing Energy ROMs! I reported this matter, but nobody paid attention, so I downgrade my device to kwbr WM6.1+sense2.1, now I have no problem with alarm clock.
about the another problem, I still have this problem, but I think it is related to WKTask! sometimes when I turn my device off by WKTask shortcut, I encounter the problem that you pointed, but it's not the case if I turn it off by hardware key.
Same question
I have used HSPL
and have tried several roms
Few days back my touchscreen stops responding.
flashed differnet roms but no difference. so i think its a hardware problem
(kinda works sometimes so may be just a loose link)
I want to send it for repair under warranty.. so can someone tell me how to get back to factory settings of Touch HD (German)
Prajwal
Ah, now we have 2 different cases.
1. Flash with USPL
2. Flash with HSPL
I'm almost sure that "virginizing" is described on HD Wiki, but nevermind...
Case 1. is nice and easy...
Go to HTC site and try to find update for your device. Before that, write serial and IMEI (not sure which one is needed, both are under the battery).
If there is "No suitable update", then you are in big trouble... try to find what was original ROM which was on device when it was delivered.
Case 2. is bit difficult... you HAVE TO remove HSPL and restore original SPL, then proceed as described in case 1. I think for german ROM was SPL 1.54
However, I have bought my device recently (with German ROM), but maybe earlier devices had some other SPL...
Check HD Wiki anyway...
prajbio said:
I have used HSPL
Click to expand...
Click to collapse
Ah... [TUT] Dummies guide: flashing 1.56+ roms [v 2.0] - [HSPL][USPL] has at least one important thing for you: stock SPL...
Thanks Guys...
I didnt think of checking the wiki...
Ill go there, and also do what you suggest...
I guess the issue is not related..I flashed a new ROM from different cook and it happened.
Nevermind...I will virginize and then have it fixed or replaced...
THANKS!!
Bodisson said:
Ah, now we have 2 different cases.
1. Flash with USPL
2. Flash with HSPL
I'm almost sure that "virginizing" is described on HD Wiki, but nevermind...
Case 1. is nice and easy...
Go to HTC site and try to find update for your device. Before that, write serial and IMEI (not sure which one is needed, both are under the battery).
If there is "No suitable update", then you are in big trouble... try to find what was original ROM which was on device when it was delivered.
Case 2. is bit difficult... you HAVE TO remove HSPL and restore original SPL, then proceed as described in case 1. I think for german ROM was SPL 1.54
However, I have bought my device recently (with German ROM), but maybe earlier devices had some other SPL...
Check HD Wiki anyway...
Click to expand...
Click to collapse
From my experience, HTC is usually ok as long as the SPL is an official one. No matter the one came with your phone or other older/newer version.
Sopis said:
Hi People
I am not sure whether this is the correct section, but it is still ROM related.
Recently, my phone does not want to wake up sometimes...I press the button and the screen remains black..after few minutes it goes back on but is unresponsive..I have to reset my phone...this is very annoying as for example my alarm also did not sound becuase of this - I was almost late for work...
In conclusion, my 560 EUR phone is not reliable anymore and is still under warranty - I want to have it replaced.
That is where my question comes - How can I completely virginize my phone?
I always used USPL while flashing...
I will perform Task29 and should I flash some stock ROM before I go to give it to service?
If so, what is the appropriate stock ROM for my phone?
What else should I be aware of when virginizing?
Please help me guys, I really want my phone fixed or replaced - it could be the motherboard causing this and I dont want my phone to die...
THANK YOU!!
Click to expand...
Click to collapse
since you just use USPL, you just need download the official ROM from HTC page by inserting your HD serial number under ROM download. then flashed it. it think this step will solve your warranty issue.
So my problem is - I put android on my htc tytn II and it worked (well kinda) but anyway I decided to switch back to Windows Mobile...
I installed 1.27.x.x radio , found a Windows Mobile 6 ROM and put (Like in the instructions ) Kaisimg.nbh(renamed from ruu_signed.nbh) and Kaisdiag.nbh to my SD card and then started flashing... It flashed smth,rebooted automatically and started booting android again...
Then I hold again camera button + power+ reset and since then when I put EVERY .nbh file on my sd card and try to flash it it STUCK on "Loading.." If I try to flash it with USB It stays at 0%.
The only exeption is if I try to flash from USB the rom that I tried to flash before from my sd card.. then it starts 0%..1% and reboot the phone...
P.S: Please help me...I think my device is not Broken but I dont know what should I do to fix it...
To flash back to WM from android put your kaiser into bootloader (multi colored screen) Then connect to usb. Download any WM build that is recent (I suggest Phoenix 3 for this, you can flash whatever you want later). After you download it open and run the included RUU that came with it and it will flash it on there.
hmm, I also had experienced the similar problem on my 1st time flashing back to WinMo.
When you are trying to flash via USB cable and the process stopped at 1% I guess there is also a message about "Invalid vender ID" right?
and if the text in your bootloader (tricolor screen) doesn't mention anything about hard such as "3.29.0000" (not "3.29.hard")
then
you've lost your hard SPL that's why you cant flash any .nbh to your phone.
I had managed to solve this problem by flashing stock WM rom for kaiser. The rom also has to be suitable for your phone, I mean if your kaiser is originally from France, then use French kaiser stock rom. Or if you are using AT&T Tilt use kaiser cingular stock rom.
you can find the list of shipped roms for kaiser here :
http://shipped-roms.com/shipped/Kaiser/
If you still have the "invalid vender ID" error message, try another stock ROM.
Thanks man you're my hero! I though I lost my phone.. anyway i bought new one - Nokia 2730 Classic but Ill sell the kaiser...
Thanks Anyway ... you're god!
Have the same problem...
Firstly, I'd like to point that the reason for the hard SPL getting overwritten by an original SPL is NOT HAVING UPDATED HARDSPL to a newer version that prevents accidental overwrite. This is instructed in the previous steps before actually installing Android. That was my mistake (I had HardSPL 1.0 OliPof), and now I can't flash no rom to my Kaiser (which thankfully works quite well in Android).
What happens (please correct me if I'm wrong) is that "KAISDIAG.NBH" is a modified, standalone hardSPL that will flash to the phone the SPL that comes with the "KAISIMG.NBH" you put in your SD card with "KAISDIAG.NBH"). In my case, I used the WinMo 6.1 spanish version 3.29.412.0, which, resulted in my phone being flashed with the original SPL 3.29.
Now, it seems many users have fixed this locating the correct stock rom and flashing it in their Kaisers. But to others, like myself, nothing seems to work. I believe that this is because we not only need a stock rom for our specific Kaiser model, but also it has to be compatible with the SPL that accidentally got installed in the phone. The problem is what if such rom doesn't even exists?
I'm really thankfull for all I learned by reading the forums (and from my mistakes ) and I know I'm in no position to make requests, but here goes what I think could help the users like myself to fix this, if posible:
1) Guide to identify what model of Kaiser we have (maybe it's already there, I just couldn't find it)
2) Complete list (or lists) of stock roms (There are some around, those are easy to find I think, but it doesn't hurt to share different sources)
3) Something like a JumpSPL for Android would be more than awesome...
Thanks in advance to everybody, sorry for my own stupidity . Any idea or help would be much appreciated,
Daniel
hmm, I'm not sure if it has to be compatible with the SPL.
In my case, I was flashing a very old WWE stock rom which has original SPL 1.56.
I also had been very desperate because any stock rom I found seems doesn't work and I even didn't know where originally my kaiser came from because I get it from my uncle. So I tried to flash any WWE stock rom I could found but nothing works. I read from Wikipedia that based on my phone model (Kais100), this model was only sold as AT&T tilt for US. But the problem is my phone is HTC branded, not AT&T tilt. Well, based on this information I also tried to flash some cingular stock rom but the result was just the same.
After contacting HTC Customer care, I know more info about my phone. They told me that based on my phone product ID, my kaiser was originally shipped for US, but unfortunately they can't provide me stock rom for my phone model. So I searched myself but this time I had better objective : to search HTC branded rom but for US.
finally, after days of search. I've found the rom that is suitable for my phone. Its called HTC WWE Brightpoint US which has original SPL 3.29 at the bottom of the list on the website I told you on my previous post.
few weeks ago I also accidentally overwrite my HardSPL again, but this time I did it with the stock ROM which has original SPL 3.29. But this problem also solved by flashing the stock ROM I've found before via USB cable.
So, I guess it has nothing to do with spl version.
Keep tying don't give up.
Update: Step 1 completed! YAY
Using the serial number and some obscure google searching, I came to the conclusion my KAIS130 is australian. Cheers, mate!
I verified this by being able to download stock roms from the australian HTC site with my Kaiser serial number. But at the moment of writing this, have downloaded two roms and no luck yet. 5 minutes remaining for the third one... Wish me luck...
Daniel.
Well... Now what?
Tried all four rom-like thingies I could download on the HTC page, all of them returning error 294...
Now what? try to somehow extract the .nbhs from the exes and and use customRUU.exe? Try to flash from SD card?
Please help... Any ideas... I really want to get rid from that original SPL3.29.0000 It's evil!!! I think it won't never let me flash again.
Thanks,
Daniel
cuartetoraro said:
Tried all four rom-like thingies I could download on the HTC page, all of them returning error 294...
Now what? try to somehow extract the .nbhs from the exes and and use customRUU.exe? Try to flash from SD card?
Please help... Any ideas... I really want to get rid from that original SPL3.29.0000 It's evil!!! I think it won't never let me flash again.
Thanks,
Daniel
Click to expand...
Click to collapse
sorry to hear that..
well, extract the .nbh from exe and flash it via sd card is the method that made me overwrite my hard SPL in the first place.
hmm, did your phone comes with operator brand, such as three or something?
-Rif- said:
sorry to hear that..
hmm, did your phone comes with operator brand, such as three or something?
Click to expand...
Click to collapse
No, it's HTC unbranded. Now, something strange here: the label behind the battery has the serial number: HT830GB06075 and the P/N (guess it's part number) :99HCY194-00, but to the left of the camera, another label with the part number: 36H00563-00M and below says DATE:061107(TB02)/US.
I don't know if that's normal, but it caught my atention because my phone seems to have been dissasembled (little label over screw is teared). Maybe my Kaiser isn't Australian after all...