I am having a problem where almost everytime I slide out the physical keyboard on the HTC Touch Pro, the screen goes to the landscape version of the TouchFlo screen. Is there a way to disable this for anytime except when TouchFlo already has the focus on the phone?
My main issue is that I may be changing something either in settings or somewhere else that requires a text input and I decide to open the keypad to enter the text instead of using the on-screen keypad and then touchFlo comes up and moves my application out of site and I need to start all over. As with some applications they don't show up under the drop down task manager so I need to restart from the beginning.
Thanks!
Anthony
umm... try the Touch Pro section?
Related
When I have both the Touch Cube and S2U2 installed, whenever I try to unlock my phone, the Cube starts instead of unlocking. When I close the cube, it goes back to S2U2, and so on... I had to soft reset my phone and uninstall the cube before I could use my phone again. Anyone else have this problem? Is there a solution?
go to the ftouchflo settings..and add the program to the exclusions..that way it doesnt activate when you try and unlock it
I have both installed. I use touchflo all the time and I've never accidentally activate the cube. In order to activate the cube you have to swipe completely accross the screen from side to side, top to bottom or bottom to top. partial swipe such as S2U2 will not activate the cube. I use pointui, opera mini4, S2U2, PIE, contacts, and pocketCM. All of those programs requires swiping the screen but not completely accross the screen. The trick is to touch the screen before you swipe. The best way to activate from the cube any program is flicking motion starting at the outside of the screen, on the bezel then on to the screen.
Or just do what volcomnator999 said and add it to the exceptions. If the cube ever comes up when you don't want it to, just add it to the exceptions, and it's no problem. No need to change your touching habits.
I have done all things you suggest but cube enable with s2u2...Can't stop it functioning with s2u2.....Any other solutions?
maybe you have older versions of those software try upgrading?
Cube e s2u2 last version....but it is possible that is touchFlo fault...The only old version program
solved!!
The configuration tool doesn't change the .txt file of touchFlo configuration. Edit the .txt and it's all ok!
Hi, I've been having the same problem with s2u2. When I go to unlock it sometimes goes to touchFLO
I've tried editing the config file, but it doesn't seem to work?
here's my config file in case it helps.
; FTouchFlo configuration file
Delay:100
GestureWaitingDelay:10000
;To disable scrolling use DisableScroll:1
; to enable scrolling use DisableScroll:0
DisableScroll:0
UpDownApp:/Program Files/TFloCube/TFloCubeCtrl.exe
UpDownAppCmdLine: close minimizeApp
DownUpApp:/Program Files/TFloCube/TFloCubeCtrl.exe
DownUpAppCmdLine: open
LeftRightApp:/Program Files/TFloCube/TFloCubeCtrl.exe
LeftRightAppCmdLine: spinRight openSpinRight
RightLeftApp:/Program Files/TFloCube/TFloCubeCtrl.exe
RightLeftAppCmdLine: spinLeft openSpinLeft
; Exclude applications
ExcludeocketCM.exe
Exclude:TomTom Navigator
Exclude:Flash lite
Exclude:iContact.exe
Exclude:jmm.exe
Excludeicsel Browser
Excludeoutlook.exe
Exclude:HTCAlbum.exe
Excude:S2U2.exe
; end of configuration
I'm not too sure why it is doing it still...
Any help is appreciated. Thanks!
Doe's any body know where I can download full version of TouchFlo and TouchCube for my Kaiser!!!
Google.com is your friend.
There are lots of versions of the cube out there so there isn't an easy answer.
I have been messing around with the cube tonight and i think the nicest "free" version that you can get going yourself is:
http://forum.xda-developers.com/showthread.php?t=336234
This is slither's flash based cube. You will need to install FtouchFLO and Flash Lite to get it working. If you read through that thread you should get enough info to get you going.
If you don't want to do the legwork you have a few options:
1) Download a ROM with a Cube cooked in
2) Download UltimateLauncher, a nice desktop shell that emulates a cube type effect (as well as other animation options)
3) Try and then buy either Touch Commander or Spb Mobile Shell. Both have "Cube-like" menus that you can use.
Thanks man!!!Serbia thanks you
HTC TouchFlo and Cube vs. scroll bar
I'm running one of the cooked ROMs with the cube and touchflo... I noticed that I have to add most programs as an exception in the touchflo configuration otherwise the cube will launch or the program will minimize if I move the scroll bar too quickly. Is there a way to adjust touchflo to only recognize slides that are done in the center of the screen? Otherwise I have to add every program with a scroll bar to the exception list because touchflo messes up the scrolling.
Does the stock HTC Touch have this problem?
Wayno-san said:
I'm running one of the cooked ROMs with the cube and touchflo... I noticed that I have to add most programs as an exception in the touchflo configuration otherwise the cube will launch or the program will minimize if I move the scroll bar too quickly. Is there a way to adjust touchflo to only recognize slides that are done in the center of the screen? Otherwise I have to add every program with a scroll bar to the exception list because touchflo messes up the scrolling.
Does the stock HTC Touch have this problem?
Click to expand...
Click to collapse
I used to adjust the Timeout using Schaps TouchFlo Config tool, the lower you make this number the quicker you have to swipe to lauch the Cube.
So long as I scrolled at a sensible speed the cube would not launch.
But that's in the past, Cubes are pretty, but I never use them, other than to show off.
Thanks
Dave.
I wish I could just have the picture dialing instead of the hole cube. I guess a one sided cube. Doesnt really make sense does it.
One place to check
HTC Home comes with most ROMS now standard with a few exections but I cant exactly remember where found my Touchflow version but i included it below also check out this site because they have a great htc home screen customizer http://www.pocketemu.com/download.html I hope this helps.
I use pocket informant. But If I want to use the touchflo, I'm pretty stuck to its layout for the today screen. What I noticed is sometimes, if I go into landscape and try to open the calender or contacts, it opens the WM version, not the PI version. Then when I switch back to portrait, the calender/contacts button is messed up sometimes still. Only way to get it to display correctly, is by opening the calender version of PI, then by clicking on the calender button on the "today" screen, it gets remapped.
Did that make sense? Any way to stop it from opening the crappy WM version?
starstreak said:
I use pocket informant. But If I want to use the touchflo, I'm pretty stuck to its layout for the today screen. What I noticed is sometimes, if I go into landscape and try to open the calender or contacts, it opens the WM version, not the PI version. Then when I switch back to portrait, the calender/contacts button is messed up sometimes still. Only way to get it to display correctly, is by opening the calender version of PI, then by clicking on the calender button on the "today" screen, it gets remapped.
Did that make sense? Any way to stop it from opening the crappy WM version?
Click to expand...
Click to collapse
I'm not sure if this is what you're looking for, but you can remap the calendar button on the touchflo home screen (AND the landscape button screen) with SSMaPa. Do a search for it over in the Diamond Themes forum.
Keep in mind it was written for the Diamond touchflo and has some bugs on the Touch Pro. There are some posts late in the thread that explain how to get it to work on the Touch Pro. It worked fine for me.
i have a touch pro (sorry if this doesn't belong here, but i assumed that they were basically the same) and whenever i go anywhere that has text input, the on-screen keyboard pops up and fills most of the screen, even when I have the inbuilt keyboard popped out.
Is there any way I can get it to stay hidden until I press the show/hide button?
There's a setting in Schaps Advanced Configuration Tool that fixes this.
Unfortunately it doesn't work in Opera due to Opera's bad handling of the keyboard. If you have problems with the SIP popping up in opera in landscape, install nullkb and look for an application that allows you to set different SIPs in portrait and landscape.
Cheers for the quick reply, I'll give these a go.
Hi, I've been looking for an answer for this for weeks now and all the solutions I found are for a NIKI and not for my Sprint HTC Pro (stock rom) all I need is a way to disable the menu that pop-up when I slide keyboard. This is really annoying and if I'm Opera or in any other program and I slide the keyboard to type something, the dialer(contact search) pop-up!! I have to close it in order to continue what i was doing.
Thanks!!!
are you talking about the SIP...not sure what pop up menu you are talking about when you open the keyboard
NullKeyboard
http://www.freewarepocketpc.net/ppc-download-nullkeyboard.html