Faster long-press button responses - Touch Diamond, MDA Compact IV General

Is there a way to set the length of HW buttons long press delay (another driver?)? For me the default length is a way too long.

+1
+1 here! for me this is also quite annoying....I had to lock my device manually by pressing the end key, but sometimes the phone doesn't respond on that....
Right now I was able to lock my device automatically but still, i'd rather prefer manually...
Ne1 out there??
Thanxxx
Regards
Jeroen

anyone????

Related

"Waking" up from Sleep Mode

Anyone know of a software that will enable the user to "wake" up from sleep mode by just touching the screen?
closet410 said:
Anyone know of a software that will enable the user to "wake" up from sleep mode by just touching the screen?
Click to expand...
Click to collapse
wow someone is lazy. haha. whats wrong with touching the power button?
If you could touch the screen and it would awake from sleep mode putting the device in your pocket would suck ass because 1) you'd be draining the battery quicker than it already drains and 2) if you didn't lock your phone you'd be dialing numbers, starting applications, or turning the volume on. Now, wouldn't it be embarrassing that you were in a meeting and the "Eye of the Tiger" started playing because someone is called you?
oh don't deny the fact that you considered putting a Rocky theme song as your ringtone to motivate yourself each day.
lol
BUT if i had s2u2 then i wouldnt have to worry about that. i love slide to unlock but i see no point in having it if i have to press the power button to wake up the phone AND slide to unlock it.
I've been in search of such progam for a while now and i still can't find one. It was great on my HP Jornada 567 how i can do it, but not with the Tilt
closet410 said:
BUT if i had s2u2 then i wouldnt have to worry about that. i love slide to unlock but i see no point in having it if i have to press the power button to wake up the phone AND slide to unlock it.
Click to expand...
Click to collapse
you make a valid argument. However, you still have to consider battery drain with the device in your pocket the backlight would always be on. I like s2u2 as well but it tends to slow the device down considerably, therefore, i stopped utilizing the application.
Good luck on your searching and please report back to this thread if you do find the software you are looking for.
I am just plain too lazy to hit the power button. Could someone make a slide-to- unlock that is active with the screen backlight off?
bdkvxd said:
I am just plain too lazy to hit the power button. Could someone make a slide-to- unlock that is active with the screen backlight off?
Click to expand...
Click to collapse
Try settings-system-key lock-do not lock buttons. Then you can wake up yor phone by pressing any button except the d-pad and center button
emilceteras said:
Try settings-system-key lock-do not lock buttons. Then you can wake up yor phone by pressing any button except the d-pad and center button
Click to expand...
Click to collapse
Awesome, that works great. Even easier then sliding the phone open a little. Thanks!
s2u2
s2u2 can wake device with any button if you set it in options. you can also map some button to activate s2u2, so you don't need to press power button
antihrist said:
s2u2 can wake device with any button if you set it in options. you can also map some button to activate s2u2, so you don't need to press power button
Click to expand...
Click to collapse
hey, this is interesting for me.
Do you mean that by S2U2 I could map another button to perform Sleep function? I am looking for to map On/Off button to the button #6. I would to sleep my tytn through that button.
any help?
thanks
fausto
I use S2U2, have it mapped to my PTT+hold button. Then settings->system->key lock, set it to lock buttons if device is locked. I usually wake it now by flipping the scroll wheel, then slide to unlock it.
I only use the power button to actually power off or on.
gwnorth said:
I use S2U2, have it mapped to my PTT+hold button. Then settings->system->key lock, set it to lock buttons if device is locked. I usually wake it now by flipping the scroll wheel, then slide to unlock it.
I only use the power button to actually power off or on.
Click to expand...
Click to collapse
thanks gwnorth, this is very usefull and interesting and I will use for the moment, but this is not yet exactly what I am looking for. What I wanna do is to assign to the ptt button the same functions now assigned to the on/off button, I am shure that there is a command to launch and perform sleep or resume when a button is pressed.
btw, thanks again for the suggestion, it is very appreciated.
ciao
fausto
you should just set all the options you want in s2u2, and then just assign button#6 to s2u2. right now i'm trying to assign long push of end button to s2u2. you can find something about remaping keys here http://forum.xda-developers.com/showthread.php?t=356322&highlight=remap
antihrist said:
you should just set all the options you want in s2u2, and then just assign button#6 to s2u2. right now i'm trying to assign long push of end button to s2u2. you can find something about remaping keys here http://forum.xda-developers.com/showthread.php?t=356322&highlight=remap
Click to expand...
Click to collapse
wow, very interesting and usefull thread!!!! This will be very usefull to customize my tytn. So by some links in the windows folder we can perform any program but......which is the command that get Tytn into sleep? and which command gets it resumed?
I am sure, thanks to everibody, I am very close to the solution now...
ciao
fausto
i can't help you with that. just join the above thread, there might be someone who would know the answer to your questions.
antihrist said:
i can't help you with that. just join the above thread, there might be someone who would know the answer to your questions.
Click to expand...
Click to collapse
thanks anti,
I have just installed PHM Keys and it does about 50% of my need. Now when I push the Ptt button it goes in suspend mode. To resume I can use the On/Off button or if i prefer any other button.
thanks,
fausto

Long End Key Press Delay

Guys,
Anyone know a way to tweak the time needed for the long press of the end key to take effect and lock the keypad?
At the moment it takes too long holding it down before it kicks in so it would be great to reduce the time and make locking the handset a bit easier.
Thanks
Al
Perhaps have a look in the registry??...i woudlnt know myself which entry it may be but hopefully bumping this up...will get someones attention.
Personally i use my long key press to kill off my data connection...
Also searched for the key in the registry, but i didn't found anything yet..
I have exactly the same wish. Nobody any idea? Com on registry specialists
MaverickCH said:
I have exactly the same wish.
Click to expand...
Click to collapse
+1 .
Is there any other way to lock the keypad apart from the long press?
I'd quite like to change my long press to 'Disconnect Data Connections' - but dont want to lose the ability to lock the keypad.
p3eps said:
Is there any other way to lock the keypad apart from the long press?
I'd quite like to change my long press to 'Disconnect Data Connections' - but dont want to lose the ability to lock the keypad.
Click to expand...
Click to collapse
If you use advanced config and start it up...go into menu and comm settings..you can specify how long your connections stays on till it disconnects automatically. So you can use the button for locking the phone.
Or you could go into your battery settings and under advanced...specify how long you want the phone turned off ie locked if its not being used..goes from 40 secs to 5 mins.
Dont know if that will help but its the only thing i can think of.
I am also searching for a way to shorten the delay for both phone buttons. I would need about half the time...
I have the solution! At least, I'm satisfied with it.
Install AE Button Plus on your machine (http://ae.inc.ru/aebplus.php). It's not free, but it took away a lot of my annoyances lol.
You can assign multiple functions to any key. The way I've sorted it out now, is that a long press on the disconnect button shows up a TF3D menu, a double press brings up the Start menu and a triple press locks the device. And my triple press is definately faster then pressing it and holding it till it locks lol.
p3eps said:
Is there any other way to lock the keypad apart from the long press?
I'd quite like to change my long press to 'Disconnect Data Connections' - but dont want to lose the ability to lock the keypad.
Click to expand...
Click to collapse
Are we talking about the on/off button on the top of the Diamond here? I only ask because I thought I`d set it to `Disconnect Data Connections` but it still will only turn off the phone.
+1 also
It's unusualy long delay...
it is really too long. tweak is needed immediateli
c'mon developers run....
+1 same wishes here.
i've set the key to lock phone and it takes toooooo long...
+1 Needed ASAP
There has to be a tweak for this.....
HastaSSSS
I'm giving this a little bump.
It's a WM bad thing, not the only one
Wait for WM7 or install AEButtons
+1
+1
hold time is too long
to lock my diamond I set long press on Lock Device, and create a shortcut under the home touchflo with the path EndKey.exe
it's the better solution I have found to lock the diamond quickly
I hope it's clear....!

Lock keypad softkey

Hi guys, i know how to change the soft key on the home screen - but does anyone know if and how you can change it so that the soft key just locks the keypad?
thanks
jimmeh1988 said:
Hi guys, i know how to change the soft key on the home screen - but does anyone know if and how you can change it so that the soft key just locks the keypad?
thanks
Click to expand...
Click to collapse
search the internet for the programm "devicelock.cab". Install this programm and change the function of the left softkey to this devicelock-programm. You find in the tweak-section how to change the softkey.
Hope this helps.
Bye
This small app will lock and turn off your phone. Hope this will help you.
If you press an hold on the 'end call' button it locks the phone.
does the lockandoff program work with diamond ?
dat would be awesome not having to wait for it to timeout after locking the keypad
caljitu said:
does the lockandoff program work with diamond ?
dat would be awesome not having to wait for it to timeout after locking the keypad
Click to expand...
Click to collapse
Yes, it does works with Diamond. I've been using it for a month.
MikeSel^ said:
If you press an hold on the 'end call' button it locks the phone.
Click to expand...
Click to collapse
..yes you are right, but not only the lock function, really useful
i also have a question, once the htc is locked can i still answer my phone call in "locked mode" ?
and ..
why not implement in the setup: lock and turn off htc ?
ljazzo1 said:
..yes you are right, but not only the lock function, really useful
i also have a question, once the htc is locked can i still answer my phone call in "locked mode" ?
Click to expand...
Click to collapse
why you just don't try it?
MaverickCH said:
why you just don't try it?
Click to expand...
Click to collapse
Because its pretty hard to call yourself to test!?
I tried it and when the phone rings it get's unlocked to be able to touch the screen... This program works exaktly as holding down the End Call button.
why not use S2U2 and link a softkey to ilock ?
Tried S2U2 and it works a bit better... To bad the screenbuttons can't be locked while a caller rings the phone. Want to remove any accidently answering/declining when pulling the phone out of the pocket....
That is an option in S2U2. Its exactly why I use it.
thank you mate
Thanks guys for your answers - those of you who said hold down the end key - i should have said - i do know that you can do that, but it just feels way to long winded and i wanted a 1 button press rather than holding the phone for about 5 seconds to lock it. Ive been using the lockandoff.exe, i like it. my only problem is, its starting to bug me that the light is always dim when the phone is locked - i have tried changing this with Advanced Config but it sticks and doesnt work. any guesses?
S2U2 is far and away the best and most comfortable locking solution for wm. in my opinion.
when i lock my HTC with devicelock and a call is coming in it will "UNLOCK" my HTC. I would prefere my HTC will keep locked until i unlock it
what do you think ? can the developer implement / change devicelock or maybe at least let the user choose if he want unlock the phone when a call is coming in or not. It happen already, when my HTC is in my poket and i rush to answer i press the wrong button and maybe close the call
A question: i set my devicelock to lock my HTC when i hold down the Phone OFF key. How to enter devicelock.cab settings if i want to change parameters? default i can enter settings by hold down the Phone OFF key, after i changed i don't know how
I also tried to uninstall devicelock with HTC software remove, it say ...removed but it is still inside because i still can use the"unlock" function. I don't know how to uninstall .....

looking for a simple button reconfigurator

Hello,
i'm looking for a replacement for AEBplus
I only need a few simple things:
left and right button - should rotate my screen, like it does when i open the keypad
ok button - task manager (or today screen from where i could start the taskmanager)
ok button (long press) - start an application
end call (long press) - lock the device (the you need to enter your password kind of lock)
What program other that AEB can do that and wont use as much CPU resources as AEB does?
you can just go to settings>buttons and assign either keft or right soft key to screen rotate, easiest way IMO
No i cant..there is only the left and right softkey button. Nothing else..and i could not setup a long press this way.
nurps said:
No i cant..there is only the left and right softkey button. Nothing else..and i could not setup a long press this way.
Click to expand...
Click to collapse
x1ButtonMapper, already tried that?
cheers
I use AEButon Plus on my X1a and I am thrilled with it. It doesn't have much (if any) negative effect on performance on mine.
Have you tried it on the X1?
Also for End Key there is a program called "Long Press End Key" I think. It is nice, and cooked into a lot of ROMs.
Hannigan174 said:
I use AEButon Plus on my X1a ...
Have you tried it on the X1?
Click to expand...
Click to collapse
hi m8, he's trying to replace it with an alternative app...as stated in #1
DrakenKorin said:
x1ButtonMapper, already tried that?
cheers
Click to expand...
Click to collapse
Havent tried that yet, can it do what i want?
I guess i could use mortscript for rotation, long press is obviously possible.
But what do i use as fast taskmanager? Can i start the built in taskmanager as application? And what can i use to password lock my device?
Edit: seems i loose the TAB key with X1ButtonMapper and the EndCall button isnt inclueded...thats bad
Is there a way to change some of the keys directly in the registry?
nurps said:
Havent tried that yet, can it do what i want?
I guess i could use mortscript for rotation, long press is obviously possible.
But what do i use as fast taskmanager? Can i start the built in taskmanager as application? And what can i use to password lock my device?
Edit: seems i loose the TAB key with X1ButtonMapper and the EndCall button isnt inclueded...thats bad
Click to expand...
Click to collapse
have a look here, didn't check, just searched (doing your homework btw...)
nurps said:
Is there a way to change some of the keys directly in the registry?
Click to expand...
Click to collapse
advanced config - menu (button) - more settings - key mappings
Mobile Magic doenst support the buttons i need. No longpress for End and no support for the OK button at all..that was the first program i tried.
To bad the options for the End key are grey in Advanced Conifg.
X1BC should allow for a lot more options than mx X1ButtonMapper. I think there is also a second application from the same author called X1BH or something. Check that out.
X1ButtonMapper is pretty lightweight actually. The most overhead involved will be by calling the script functionality but that is done asynchronous, meaning that X1ButtonMapper doesn't wait for the called application or script to finish - it just launches it.
I didn't remap the red and green phone buttons because they can't be easily remapped and I think they are central buttons which should keep their original functionality. I think remapping them will cause more bugs than you will gain functionality. With X1ButtonMapper you already gain enough options for the remaining keys (each with short and long press) which should be enough for most applications. You can also reassign the missing FN+key combos on the keyboard.
I did use the Tab key as Ctrl substitude because I think Tab is not important for Windows Mobile. It is substituted in most dialogs with the right/left keys so use these. You can get the original Tab function when pressing FN+Tab for the few situations where you really need it.
I am using X1ButtonMapper for a long time now and havn't had any stability issues - maybe that's the trade off for having less features.
X1Button manager somehow didnt react to my OK key. I allready have a standalone taskmanager mortscript could run but Ok didnt do anythink. Longpress of the softkeys to rotate the screen worked nicely though.
Longpress delay is a little longer than im used to but that not a big problem.
The longpress of the End key has allready a keylock function as standard setting (wich i find totally stupid because i turn the device of with the switch on top). There must be a registry setting that i could alter so it would run the password lock instead.
I will check into X1BC...
X1BC works thank you...and i like it much more than X1BM because i can setup everything to my likings, longpress timing, vibration on/off and wether i want a Control key replacement.
I could even use the panel key to lock my device if reprogramming of the end key button is not possible.
Does anyone know wich program i have to run to password lock my device? Maybe its possbile with mortscript..i should check that...

Assign "Power off" button function to left soft key

Hi guys,
For suspending power on my Topaz I use a little programm called MySuspend.
However, it started to make problems on my analog clock in my Co0kie Home Tab home screen. This clock seams to stop going when the device is suspended.
BTW, the nominal flip-clock goes as it should.
I marked also that when suspending (turning off screen) with the power button, it does not influence that analog clock, so....
could anybody help on how to assing the direct functionality ????
(I use Advanced Config to assign. The question is actually what is the actual .exe file, that is nominaly assigned to powef button).
Thanks in advance for any help.
I am not certain of the actual 'power off' function and what .exe initiates it, but if you install TD2 Tools (or whatever the latest version is called) you can set your softkey in HKLM\Software\HTC\Manila
Set HomeLSKText"="Windows\PowerOffWarning.exe" to initiate Boot manager Screen, as shown below.
Bruce Inman said:
I am not certain of the actual 'power off' function and what .exe initiates it, but if you install TD2 Tools (or whatever the latest version is called) you can set your softkey in HKLM\Software\HTC\Manila
Set HomeLSKText"="Windows\PowerOffWarning.exe" to initiate Boot manager Screen, as shown below.
Click to expand...
Click to collapse
Thanks Bruce for the hint,
but I just would like to click the left soft key and it should be done (suspended).
The choice of couple of options is a bit to many clicks to go.
Thanks anyway
Anybody knows the solution ???
One thing you can try...
I'm not certain if TD2 Tools replaces anything in regards to .exe's but if you can browse through your windows folder and look for some type of power???.exe (not sure what it would be called exactly) but it should start with 'power' and see if you can find the .exe that activates a power down.
That's how I found the .exe in my previous post, but mine may have been replaced....
Sorry, just to be clear, you want to power off device or just suspend?
Bruce,
I want just suspend the device, exactly as the power button does it
I may be wrong but.....
I don't think it can be done as the power button suspends via the baclight settings in the registry.
Code:
[HKEY_CURRENT_USER\ControlPanel\BackLight]
"ACBrightness"=dword:0000000a
"ACTimeout"=dword:00000000
"ACTimeoutTemp"=dword:00000000
"ACTimeoutUnchecked"=dword:00000000
"AutoBklOffset"=dword:00000000
"AutoDeviceLockEnable"=dword:00000001
"AutoDeviceLockTimeout"=dword:00000005
"AutoSensor"=dword:00000001
"BatteryTimeout"=dword:00000078
"BatteryTimeoutTemp"=dword:00000000
"BatteryTimeoutUnchecked"=dword:00000078
"Brightness"=dword:00000007
"DimBKLinUnlockScreen"=dword:00000000
"LedOnOffAdcValue"=dword:0000013f
"LightDetectOn"=dword:00000000
"MAXBrightnessScale"=dword:0000000a
"MINBrightnessScale"=dword:00000001
"QKeyLedTimeout"=dword:0000000a
[HKEY_CURRENT_USER\ControlPanel\BackLight\LockLevel]
"LockLevel"=dword:00000000
There is no .exe involved.
Well,
I just found poweroff.exe, that makes the action that is done when you press and hold down the power button.
So if that is an exe-file for this action, then ......... ??
I assumed you had checked for the .exe already!
Bruce Inman said:
I assumed you had checked for the .exe already!
Click to expand...
Click to collapse
As I wrote before "I found in Windows folder poweroff.exe"
So hopefuly there might be some other option for suspending as the button, but where .......
Perhaps something is getting lost in translation here but....
You stated "I just found poweroff.exe, that makes the action that is done when you press and hold down the power button."
Does that mean when you click the poweroff.exe, your phone goes to suspend as it does when you hit the power button? Did you confirm this?
Bruce Inman said:
Perhaps something is getting lost in translation here but....
You stated "I just found poweroff.exe, that makes the action that is done when you press and hold down the power button."
Does that mean when you click the poweroff.exe, your phone goes to suspend as it does when you hit the power button? Did you confirm this?
Click to expand...
Click to collapse
Sorry, I've been away for a while.
When I click power.exe, it asks "Do you really want to turn off your device?",
ie. it's as if I would press & hold the phisical power button.
So, if that function of the power button exists as an exe-file, I assume that a suspend-function also would, but I can not find anything like "suspend.exe".
Maybe the file has another name ??
Grab Keyboard Config for Topaz from http://forum.xda-developers.com/showthread.php?t=555821&highlight=keyboard+config
Edit action for button of your choice. Under the Power management category, I have screen power toggle, suspend device and reset device.
Is this what you are after?
arrow224 said:
Grab Keyboard Config for Topaz from http://forum.xda-developers.com/showthread.php?t=555821&highlight=keyboard+config
Edit action for button of your choice. Under the Power management category, I have screen power toggle, suspend device and reset device.
Is this what you are after?
Click to expand...
Click to collapse
My goal was to assign the "suspend" action to the left soft key,
but thanks a lot arrow224 !!
I assigned one of the hardware buttons & will test it

Categories

Resources