Related
restarted my phone at work today and all it does now is go straight to the tri colour boot loader screen. Iv take sím out, SD card out, battry out, nothing works.
Put the USB cable in and it starts on its own straight to the tri colour screen without pushing start button
Any ideas..
Thanks Ahead
Maybe it´s as easy as that the camera-button is stuck? That happened to me with the power button. Now the power button is a bit "loose" in feel but is not active all the time.
yeap
I thought of that, iv pushed the camera button quiet a few times trying to see if its stuck but it didnt help at all, still doing it. If i connect the USB cable with no battery in it starts up on its own as well and goes straight to the boot loader screen.
Its says
WING220 MFG
SPL-0.91.hard
CPLD-7
USB
update
A quick update, if i actually put the USB headphones in the phone and try to start it it works. A restart with them in works to. Take them out and its straight to bootloader again. LOL Also Windows does not recognise the phone when its conected via USB cable when its running. This seems to be a USB problem of some kind. Iv done a hard reset as well, no luck.
Try this: enter bootloader and type "boot". If it again enters bootloader after restarting do the same thing again. Hopefully that fixes it.
hehe
No change. Only way to start the phone is with the headphones connected. When the phone is running and i conect it to the pc i get this " One of the USB devises attached to this computer has malfunctioned, and windows does not recognize it "
NoNco said:
No change. Only way to start the phone is with the headphones connected
Click to expand...
Click to collapse
Try "task 8" in bootloader and then "ResetDevice"
(ps do *not* experiment with other parameters!)
nope
When i used "boot" it made a buzz and went to a white screen, had to remove battry to restart, it didnt help, tried 3 times.
" task 8 " it goes dark for a split second and back to the bootlaoder screen. remove bat. restart back to bootlaoder screen
oh after i type task 8 i get an error that pops up in mtty
wceusbsh004 port read error occured
try Hard resting it but juss to let u kno IF U DO THIS U WILL LOSE a last memory u did even phonebook and all resets like new i had to do it cuz i had a prob i could not text n stuff now it works fine after HARD RESETING
doesnt work
Iv already done the hard reset from within WM when i get the phone to work, it didnt help.
Try the hard reset after re-inserting battery immediately at power on.
(keep left- and right softkey pressed and power on I think is the key combination)
mmm
trying to do it but i must be doing the key combination wrong. Just keeps going to tri colour.
I presume you meen the soft keys on the sides of the s730. Camera key and the Comm Key.
NoNco said:
trying to do it but i must be doing the key combination wrong. Just keeps going to tri colour.
I presume you meen the soft keys on the sides of the s730. Camera key and the Comm Key.
Click to expand...
Click to collapse
No, the softkeys are the two buttons next to the joystick, see here ->IMAGE<-
But I would think your mini-USB connector is kind of broken I'm not sure of course
nope
Iv tried the keys on the side, iv tried the keys on the keypad. i just dont get it to work...
mm
@ Jocky...
I eventually managed to do a hard reset, the problem was it just kept going to the bootscreen so i tried it with the headphones pluged in and then it worked, lol, but on the reboot it just went straight back to the tri colour screen again.. So no help there.
NoNco said:
@ Jocky...
I eventually managed to do a hard reset, the problem was it just kept going to the bootscreen so i tried it with the headphones pluged in and then it worked, lol, but on the reboot it just went straight back to the tri colour screen again.. So no help there.
Click to expand...
Click to collapse
Hmm, looks like a bootflag related to USB is set. The reason could indeed be a physical problem with the usb port of the device. Also it could be related to dirty contacts (both of the UB port and the battery).
I’m having the exact same problem with my S730. Only works with the headphones plugged. I can’t hear nor talk if unplugged the headphones. Does anyone knows how to fix this ???
Hi People
I think I have really bricked my Diamond for sure. I have read all the threads related to this problem and have tried all the possible fixes but to no avail.
Here is the problem: It is stuck on the first screen after tri colour screen showing the RGD info in red ink at the bottom right cornor. Pc wont recognize it and Active Sync 4.5 on xp is grey, not green.
I have done a few Hard resets and Soft resets. I have Olinex Hard Spl installed. Had Dutty's 1.6 working perfectly when decided to cook my own with Surface Kitchen. My first cooked rom worked fine and then I cooked another one with same base Stock rom , adding som programs and bam, this thing happened.
Please Help Help and yes I had flashed the same Diamond with every available cooked rom with no problem.
Thanks in advance. Lets not Die this beautiful Jewel.
Anyone please?
tararura said:
Anyone please?
Click to expand...
Click to collapse
Can you get it into bootloader mode??? If so, you should be fine to re-flash at that point.
I can get it to tri colour screen but it wont sync with pc ...?
tararura said:
I can get it to tri colour screen but it wont sync with pc ...?
Click to expand...
Click to collapse
So after getting to the tri-color screen and then plugging in the USB cable, you do not get "USB" at the bottom of the screen?????
Thanks for the quick reply..
Ok here is what I am doing. I perform the hard reset. Get the tri colour screen for couple of seconds and then it comes to the screen where it asks to press Volup to restore. I did it with the usb connected and usb disconnected but it wont sync. Active sync icon at the bottom on pc stays grey not green.
Pressing Volup on diamond restores, reboots and brings it back to 1st splash screen with RGD info at the bottom in red ink. aaaaah
When you are in bootscreen, connect via usb.
In the bottom off your screen you should see "usb"!
If this is what you see then flash one of the stock roms again.
After you've done this, your Diamond restarts and everything should be OK again!
Good luck!
Ok, do this:
1. Unplug the USB cable from the phone.
2. Hold down the Volume-down key and the Power button, then press (and let go of) the RESET button with your stylus.
3. When the tri-color screen appears, you can let go of the buttons.
4. The screen should say "Serial" at the bottom (in the gray color area).
5. Plug in the USB cable (The screen should change to "USB").
6. Run the RUU app to re-flash the phone.
That should get you back up and running.
To enter bootloader, turn phone off then press volume down and reset simultaneously and then power ono. If you have done this correctly it will remain there and the word "serial" appears at the bottom. Then plug in USB and the word changes to "USB" you can now flash ROM
When I flashed mine it also got stuck te first time because Windows found it necessary to install new USB driver when the Flash util wanted to connect to the HTC. The flash program jumped out leaving the diamond with the RGB screen...
But, after windows installed the new USB driver, I restarted the flash program and it finished just fine.
So if you cannot connect anymore I would try to find out if the USB driver has changed. Did you try connecting to another USB port?
Otherwise I would try to connect to another PC...
Hope it helps,
Beamer
fingers crossed
hope you unbricked it m8
@tararura
Be sure to come back and update the thread if you were successful. It may help others later if they search instead of starting another thread with a similar problem.
Holy smokes......
Its breathing again. Thank you TomInMB and Windoze9t8. Give yourselves a kiss for helping me out.
I used Windoze9t8's method and it came to the serial screen and then I flashed it with Dutty's.
So I was using hard reset method to get to bootloader screen, which was wrong.
So for everyone else, its Voldown and reset button at the same time for Bootloader screen.
Flashing is done and Active Sync recognized the Diamond.
Thanks again for everyone..... and I am sure that a few of us learnt the new trick from this thread.....
Glad to hear you're all set!!!! I sure would hate to have the feeling that my precious diamond was useless!!!!
Thats right , I already lost a lots of sleep trying to fix it last night..
hi there,
this morning, without any interactiom, i heard the vibration of my touch diamond restarting.(with original newest ROM from htc website that ran without any problem for several months). battery was about 80% yesterday evening.
but it wasn´t starting at all. after the HTC animation and the green windows mobile screen, it started again. after restarting for 20 minutes i took out the battery, put it in again and performed a hard reset as stated in the manual.
now, on the "rainbow" screen i get a message like
psoc diam stage_pvt 0x32
then i did the Volume-Up reset, and now i don´t even get the red version information in the lower right screen. as it doesn´t even start i cannot get an active sync connection.
any ideas? is my phone broken? i didn´t do anything special, and i wonder why it rebooted without interaction this morning.
any ideas what i can do?
thanks in advance,
jkersch
Mine started doing this about 2 weeks ago it woke me up in the middle of night while sleeping with its vibrator and start sound.
The only thing I have found is that my little reset button at the pen holder dosent work anymore. To do a hard reset i have to takeout the battery and then put it in, hold the volume key and enter key then power it to get it. Flashed by holding volume down and the power on, it hold for about 10min just enough to get the flash.
I managed to flash it once but it dosent help, it constantly reset at the thouch diamond screen. Some times i get to the green windows mobile screen.
As warrenty is out on my phone and ive given up and using another phone.
Same problem in a different thread
Have a look at http://forum.xda-developers.com/showthread.php?p=5279740.
install a new radio worked for me
hm , yesterday i installed a game. i try to play, but my phone freezed. i take battery out, put it back and phone no longer turning on. When the phone is connected with laptop via usb, i can turn on till green screen and then phone restarts. wtf is the problem ?
P.S my phone has wm5
Do a hard reset,
how ? two soft keys + power button ? not working
There was once when I thought the hard reset method was not working either. I later found out that it was because one of the two soft keys(usually the left) was not very responsive. When I tried again,this time pressing harder on the two soft keys, it worked.
Hello,
I have here a diamond unit, that client complained about this issue from months ago.
Volume key (-) doesn´t seem to function correctly.
As so he can´t enter in bootloader by pressing volume key(-) + power button.
The problem is that phone is now stuck at WM startup. And I can´t put it in bootloader to flash it.
He´s stuck at tap screen align, just random reset itself.
I can hear the sound of USB connection with PC, but not fully connected to activesync, so back again, can´t detect himself to start RUU process.
I need some ideas...
BTW: Yes I know where the problem of volume key is. It´s on the PCB board connector with flex. But can´t fix here at home, will need wait few days to come into the office and try repair. Meanwhile would be awesome to be able to flash it and put it at normal work again.
Drug_Store said:
Hello,
I have here a diamond unit, that client complained about this issue from months ago.
Volume key (-) doesn´t seem to function correctly.
As so he can´t enter in bootloader by pressing volume key(-) + power button.
The problem is that phone is now stuck at WM startup. And I can´t put it in bootloader to flash it.
He´s stuck at tap screen align, just random reset itself.
I can hear the sound of USB connection with PC, but not fully connected to activesync, so back again, can´t detect himself to start RUU process.
I need some ideas...
BTW: Yes I know where the problem of volume key is. It´s on the PCB board connector with flex. But can´t fix here at home, will need wait few days to come into the office and try repair. Meanwhile would be awesome to be able to flash it and put it at normal work again.
Click to expand...
Click to collapse
If you can boot windows look in my signature there is a Boot loader tool and it works on diamond i have tested it
Also there is a post for forced boot loader mode for htc prophet\wizard involves connecting power to pins manually will this work for Diamond ?
Ok finally fixed it
Explored the thing about hearing USB connecting... WIN7 would never been possible, but under XP and activesync, that was enough to connect and flash.
@wapvirus
Yes, I thought about power pinout, but could require advanced tools, which I don´t have at home...