My Diamond's screen can not be aligned. - Touch Diamond, MDA Compact IV General

I have a hTC Touch Diamond and recently found the machine's screen can not be aligned. Not actually not alignable but sometimes it shifts to left or right. Sometimes, when the machine is recharging, making a call or using Wifi, it becomes hot! and it happens the problem. Today, I found it will has the problem when I holding it on my hand. I will need to perform the screen alignment 100 times a day.
Anybody could help to fix this problem? Or even though you tell me the term of this issue would be appreciated.
Thanks & Regards,
Season Lau

Please search as there is a Cab for this....

Hey seasonlau,
There are more people who have the same problem as you.
Check here: http://forum.xda-developers.com/showthread.php?t=438733

seasonlau said:
I have a hTC Touch Diamond and recently found the machine's screen can not be aligned. Not actually not alignable but sometimes it shifts to left or right. Sometimes, when the machine is recharging, making a call or using Wifi, it becomes hot! and it happens the problem. Today, I found it will has the problem when I holding it on my hand. I will need to perform the screen alignment 100 times a day.
Anybody could help to fix this problem? Or even though you tell me the term of this issue would be appreciated.
Thanks & Regards,
Season Lau
Click to expand...
Click to collapse
I had this issue. The only solution is to exchange the device for another one.

Related

softkeys problem

I'm having problems with the softkeys, specially the left one it usually bounces and repeat the keystroke.
Has this happened to anyone?
similar problems here. little bit irritating.
Sometimes, too. More than that I have to push it few times to make it "click"
This was my last HTC
Same here! Weird.
I have this problem too. And also my camera have one horizontal line that changes color, on preview and on pictures. I tried to contact HTC in UK because i bought my phone there (i live in Croatia). But no response.
Same problem
Hi,
I have the same problem in my phone bougt this christmas. Left and right from joistick, and both softkeys work very very bad. Sometimes I have to press hard to obtain some response and others only one press makes two or three movements. This is very anoying while selecting pictures or using the calendar.
I'm searching for the invoice to take it to the technical service.
Best regards,
same problem here, can you please tell me wich rom you are using, the HTC rom or WM 6.1. I'm using 6.1 ROm and am wondering if the problem is ROM related or a hardware issue
Hardware, I kept the phone as it came in the box.
Litoven said:
Hardware, I kept the phone as it came in the box.
Click to expand...
Click to collapse
Quote. HW problem.
Bad unit
Anybody fixed this problem? By HTC service maybe?
same
same problem!
has anyone fixed the problem?
my wings always jumps 2 steps when i push the button once.
greets
schneidl
Ive just sent my phone off to HTC to be looked at (hopefully repaired under warranty). I've had the same stress cracks a lot of people seem to be having. And also the problem of multiple button presses randomly, lost count of the number of blank sms replies i sent because of it.
I'll let you know if I notice any improvement when i get the phone back or if they mention it at all.
problem
I sent 2 time my s730 to repair service for this problem. Finally they change the keyboard. The problem is reduced but not really solved.
I'm not sure it is a HW problem.
My phone is going back to HTC on monday...
1) single keypress jumps the menu twice
2) cracks in the side where the screws start
3) phone is very slow
The guy on the helpdesk asked me if I had ever upgraded my phone... so I had to tell him that it is HTC policy to not make any new updates for phones, they just bring out new phones... no reaction whatsoever...

PROBLEM : Call drops after first ring?

Hi,
I'm having trouble with my Diamond. When a private number calls, it gets dropped after the first ring, before I get a change to get then phone even out of my pocket?
Its really frustrating... and its starting to do it on number, unbarred numbers?
Has anybody seen anything like this before? It doesn't happen all the time, but its getting pretty consistent!
I'm running SwiftBL 5.6 and Radio 100.05.25
Please help!
DG.
DanGlee said:
Hi,
I'm having trouble with my Diamond. When a private number calls, it gets dropped after the first ring, before I get a change to get then phone even out of my pocket?
Its really frustrating... and its starting to do it on number, unbarred numbers?
Has anybody seen anything like this before? It doesn't happen all the time, but its getting pretty consistent!
I'm running SwiftBL 5.6 and Radio 100.05.25
Please help!
DG.
Click to expand...
Click to collapse
yes, I'm experiencing the same thing too and I'm using the official 1.93 rom.
as far as I know, it doesn't only affect private call and the problem is very random.
What I notice is the phone will keep ringing until you press any button or the touchscreen to answer or mute the call and that's the time the phone will drop the call....hoping to find solution too....
I had the same problem with the HTC 1.93 ROM. Changing radios made no difference. Switched to Swift v5.6 and all is OK. BTW am in UK on Orange.
even with 1.37 rom, i'm also having the problem....wonder does anyone know what's the problem and solution....
I had this problem after I've tried to sort out the 3 sec delay problem... After a Hard Reset and not playing with the 3 sec delay problem everything is fine....
vibecatalin said:
I had this problem after I've tried to sort out the 3 sec delay problem... After a Hard Reset and not playing with the 3 sec delay problem everything is fine....
Click to expand...
Click to collapse
hmm....I didn't mess with that delay at all but still the problem is there...
Lay your phone on the table and try again.
Most comes with the problem in your pocket.
As soon as the phone rings the touchscreen is enabled and it drops the call because it thinks you pressed ignore.
This problem can be solved by s2u2.
I had the same problem and solved it with this program.
It blockes your touchscreen unless you slide it from left to right completely.
Grtzzzz
Yeah, thats exactly it I think... because its always in my pocket, but I have the HTC case, which by the time I've either take it out of my pocket or out of the case, the call has gone!
Does anybody have a link for that app s2u2.
I will try this... because I tried changing the ringer settings and all sorts, and nothing helped! All the iPhone and N95 guys are slagging me at work! Apart from that its by far the best phone in the office
Cheers for the help!
Will report back if I find that and app if it works!
DG
http://forum.xda-developers.com/showthread.php?t=412418
Grtzzz
baraata said:
Lay your phone on the table and try again.
Most comes with the problem in your pocket.
As soon as the phone rings the touchscreen is enabled and it drops the call because it thinks you pressed ignore.
This problem can be solved by s2u2.
I had the same problem and solved it with this program.
It blockes your touchscreen unless you slide it from left to right completely.
Grtzzzz
Click to expand...
Click to collapse
definitely not due to that problem. Numerous time, my phone was not in my pocket but on the desk already. A couple of time when the phone ring, I pick it up and press the answer button(touchscreen and hardware button) but it just drop the call....haizzzz
No one else has this problem?
I'm getting exactly the same problem (I'm using the official Vodafone 1.93 ROM)...really annoying!
I am getting this problem too... anybody have a solution? Whenever a private number comes in, when i click on the answer tab, the call will just disconnect... this is very fustrating...
I also get this issue, always with a private number and sometimes with a stored number. At first I thought it was becuase I was touching the screen when I first took the phone out of my pocket but like someone else said this also happens when its on a table.
Any help would be really appreciated!!
try this forum.xda-developers.com/archive/index.php/t-258109.html

Please Help White screen, discoloration, and unresponsive touch

Hi all,
I have a T-mobile wing and it has the stock rom on it. Also, it is not hard spl anymore. I used to have open touch 6.1 lite diamond. The phone turns on and makes the keyboard sound. When it turns on there is a white screen but if you move the screen out so that the keyboard is visible you can see a discolored screen with windows mobile on it. Also, you cannot use the touch screen. The farthest you can get is the welcome screen that has the align screen but it wont align. Would anyone be kind enough to please help me with this issue. I greatly appreciate the help and great thanks to all in advance. I have read around in the forums and it says to buy a new screen, a digitizer, or fix the display drivers. I currently think it might be a software problem but I do not know where to start. Again any help is appreciated and thank you all again in advance for your help.
Have you given the unit some time indoors to warm up? Working for Garmin tech support, I have seen many wierd thing go on with screens and electronic device as a whole when it starts getting cold outside.
Then again, it may be something that is going on with the software of the phone. Something along the lines of a display driver.
obsidian06 said:
Have you given the unit some time indoors to warm up? Working for Garmin tech support, I have seen many wierd thing go on with screens and electronic device as a whole when it starts getting cold outside.
Then again, it may be something that is going on with the software of the phone. Something along the lines of a display driver.
Click to expand...
Click to collapse
Thank you very much for responding. Yes, I have let the unit warm up. At first this problem went away but it came back after. What do you mean by display drivers? Do you think I should hard-spl again and try a new rom? And if that doesn't work, should i open up the unit and see if the cable it tightly attatched? Before the discoloration, I was able to use my phone with open touch 6.1 lite, but there was a white screen when the keyboard was not visible. Also, when i moved the keyboard, the phone would work by allowing to me call and text but it would freeze a lot. I hope this clarification helps.
Mod please move to herald section because this topic may or may not pertain to herald mobile 6.
Would anyone please help me I would greatly appreciate any advice, thanks in advance to all. p.s. I added pics and the touch screen doesn't work, the physical keys kind of work when the screen is viewable.
Reply please!
did you ever figure it out!? oh wow finally i found someone with a similar problem. my wing was in my pocket at work when the first similar signs arose. ITS PRACTICALLY BRAND NEW! it did that for a while and now the screen is just all white=( PLEASE help! anything would be good. i just want to know if its fixable or should i just get a new phone. you can email me too at [email protected]

Touch Screen

Hi guys I've got a HTC Ignito and Id like abit of advice the touch screen on my phone seems to be acting up as u can press on the left hand side and it will detect pressure but only the top and bottom 5mm will work properly the rest it will activate what is on the opposite side or will do nothing.
when Ive tried to calibrate the screen it just constantly repeats the calibration process non stop but if you do a hard reset it will start working properly but as soon as you reset phone it messes up again.
Any one any ideas is the touch screen broken or is it another problem its got the stock rom on it
Sorry for the bad structore of post feeling abit tired as been up for hours annoyed at my phone.
I noticed a simmilliar issue starting a couple of weeks ago. Looks like the X-axis of the digitizer starts to die. In my case it only detects touches in Y direction, but not in X.
So far it only appeared under hot condition like sunlight or constantly running device in craddle. After cooling down it always came back to normal behaviour (so far)
Cheers bud for the reply. Its weird tho as its same as yours as it will detect the Y axis movemnt as when i hadnt hardrest it you could minamise the clock but that was it. Simalar problem happened to my grandads orbit and acted like urs then got progressivly worse over a few months.
I wonder if anybody knows if it would be sortedby getting a new touch screen.
HI...
Hopefully we are not the only ones... But yeah my MDA Compact (Diamond on T-Mobile UK) is doin the same thing. Like you guys, mine has staterd to get worse, before it was just a few edge icons that i could'nt press..but now sometimes pressing the screen anywhere does nothing, all i can do is scroll up or down.
Axelpix... you make a good point about temp...mine gets quite warm when charging on the USB. I will try to see if this is causing the problem.
Any info on fix would be greatly welcomed.
PS i'm running the Windows 6.5 Energy ROM. 14/07/2009
Hi guys least im not alone I think the only way to fix this problem might be to replace the touchscreen im just looking to see how much it would cost to buy a new one and if its easy to just replace the screen or if it comes attached to the lcd screen like on the orbit
continuous request to calibrate the screen
Yes, I have experienced this when i switched the handset on for the first time after purchase but it went off when I forced a restart to the handset.

No key responce of keyboard and frontpanel or wrong responce

Hi all,
Since a couple of weeks my X1 has the following problem.
- Key on the front do not work
-- Backlight lits up but no responce from key or wrong responce (starts dailing last number)
- keyboard no responce
-- keys lid up but no correct responce
-phone starts dailing last dailed nr automatically (phone laying on table and not touching it, it still dailes the last nr at random times)
-restarting no help.
-soft restart no help
-battery removed and wait >4 days... problem solved but returns after 3 days (give or take)
Had windows 6.1 installed at first when the problem started.
Now I have 6.5 SEX1 version installed but same problem occurred.
anybody ideas?? or even recognize the issue? could not find a simmilar issue
kind regards
Wally
Sounds like you have hardware issues. Still got yer warranty? If so, reflash orignal everything and send it back because its obviously more than a firmware problem
Hmm... sounds bad..... I have no Warrenty anymore.... does this mean my phone will slowly but surely turn into an nice brick.....
any ideas how to fix this... except buying a new one....
You could try disassembling the whole unit, and cleaning all of your contacts and ensuring that all of your connections inside are secure.
No guarantees it will help, but if you are at the point of giving it up for lost then it couldn't hurt.
Cleaned my phone today... took it appart to the last screw, cleaned it..... unfortunately no help.
Responds to the 1st button, then no responce to the following...
Well, if it's only the buttons, you could use an application like AE Button Plus to disable them alltogether. Then you can just only only the screen itself to control the phone.
Thanks for the suggestion, but that is not what I am looking for .... (yet)
I hope there is a way to fix this, hopefully somebody had the same issue and was able to solve the issue.... if not... I can always use that program then.
Wally850 said:
Thanks for the suggestion, but that is not what I am looking for .... (yet)
I hope there is a way to fix this, hopefully somebody had the same issue and was able to solve the issue.... if not... I can always use that program then.
Click to expand...
Click to collapse
I've been lurking these forums for a while and I have never had, or seen reports of the problem you describe. I'm assuming you tried the search function (google) as well. If that turns up empty too, you're out of options.
Had a very similar problem when my phone got slightly wet, dropped from ear under tap when washing my hands. Problem didnt show for a few days so didnt think it was the water, but in case it was I heat soaked it by leaving it behind glass on a sunny day while charging. It got very hot but after a few treatments it was cured and has been ok for a year.
It realy was unuseable as the keyboard and all buttons were giving totaly false random responces.
Worth a try.
Yes I searched on Google as well... no help unfortunately.
Although I took my phone appart, and cleaned it so it should be dry.
I can always put in in the oven and heat is up to .. lets say 55 degr.C and leave it for an hour to bake..... need frosting on that afterwards....
tell you more tomorrow
just tried my luck using the oven.... no help.
I am out of ideas....
think I will try that buttonprogram afterall....
thanks for helping
Did you use this tutorial??
http://forum.xda-developers.com/showthread.php?t=535664

Categories

Resources