Related
I'm trying to downgrade my radio firmware, but everytime I flash a lower version number radio it does not seem to take.
The flash completes fully, but when I look at the version number it is still at 1.54.30.10 which I am trying to replace with either 1.54.07.00 or 1.47.30.10.
Anyone know why this is happening and how I can reflash my radio?
xrufusx said:
I'm trying to downgrade my radio firmware, but everytime I flash a lower version number radio it does not seem to take.
The flash completes fully, but when I look at the version number it is still at 1.54.30.10 which I am trying to replace with either 1.54.07.00 or 1.47.30.10.
Anyone know why this is happening and how I can reflash my radio?
Click to expand...
Click to collapse
Use MTTY and do a "Task 2a" then flash an official ROM.
reyjabs said:
Use MTTY and do a "Task 2a" then flash an official ROM.
Click to expand...
Click to collapse
That didn't work. The Radio version still is the same.
Any other ideas or maybe I just need more specific directions?
My phone is unlocked with the CheetahUnlocker (which I believe uses the HardSPL.)
xrufusx said:
I'm trying to downgrade my radio firmware, but everytime I flash a lower version number radio it does not seem to take.
The flash completes fully, but when I look at the version number it is still at 1.54.30.10 which I am trying to replace with either 1.54.07.00 or 1.47.30.10.
Anyone know why this is happening and how I can reflash my radio?
Click to expand...
Click to collapse
Where does the 1.54.30.10 Radio ROM come from?
Palm or Hermes?
chaimd said:
Where does the 1.54.30.10 Radio ROM come from?
Palm or Hermes?
Click to expand...
Click to collapse
I believe it is a Hermes.
I'm sorry. I don't know the version of Hermes's ROM for recovering.
If you would be lucky, you might find it.
I have not done recover from Locked Hermes's Radio,
because I never flash Hermes's Radio to my Treo750.
chaimd said:
I'm sorry. I don't know the version of Hermes's ROM for recovering.
If you would be lucky, you might find it.
I have not done recover from Locked Hermes's Radio,
because I never flash Hermes's Radio to my Treo750.
Click to expand...
Click to collapse
How about radio 1.54.07 chaimd? I got it from here http://forum.xda-developers.com/showpost.php?p=1563015&postcount=1
reyjabs said:
How about radio 1.54.07 chaimd? I got it from here http://forum.xda-developers.com/showpost.php?p=1563015&postcount=1
Click to expand...
Click to collapse
I don't recommend 1.54.xx.xx.
Perhaps, Unlocked 1.48.xx.xx from Hermes might be able to downgrade.
My friends, who unlocked Treo750's SPL 6M before Hard-SPL, have several Treo750s.
One of his Treo750 has a fully locked Hermes's Radio. We can't reflash its Radio.
Is there any way through mtty to erase the radio rom so it will reload when a new rom is flashed?
Haven't really seen a definite answer here to the original post...
I actually am trying to do the exact opposite of the OP.
I currently have Radio: 1.54.07.00 and am wanting to upgrade to the 1.54.30.00 but can't do it anyway I try whether it's using RUU interface or placing on a formatted SD card and changing it to CHEEIMG.nbh.
It runs through the process, and acts as if it is updating/changing the Radio Rom, but nothing changes.
Can I change my Radio or not?
Treo 750 unlocked w/ CheetahUnlocker and Running WM6.1 Full version.
Thanks for the help!
btw, I read a lot of threads and posts... and read the Heremes Radio Wiki - just can't seem to find a definitive answer. Also when I flashed the Radio after using CheetahUnlocker it flashed the Radio w/o issue.
Run through the cheetahunlocker again (all stages, regardless if they error out).
Then use the kaiserRUU to load the new radio .nbh
tmknight said:
Run through the cheetahunlocker again (all stages, regardless if they error out).
Then use the kaiserRUU to load the new radio .nbh
Click to expand...
Click to collapse
Thanks tmknight... you're always helpful!
cheetahunlocker won't erase all my stuff on the treo if I recall correctly, right???
i'm pretty sure it won't, but it's been a while since I used it last...
thanks again
Please,after flash any version ROM and APPLY CheetahUnlocker (WM5 or WM6) my TREO view in Setting/System/About this:
WHAT IS WRONG???
EDIT:
With flash WM5,treo is VERY SLOW.....croling,open menu etc. se this thread: http://forum.xda-developers.com/showthread.php?t=384531
With flash WM6 all O.K
Bootloader is CRASH?
After rest treo view error services.exe,slow thumbail on images not work AS synchronize NOT WORK and many
BUGs..HELP PLEASE
The problem
As alluded to by Chaimd, that particular radio is locked and will not allow for radio flashing unless an SPL is loaded which can perform an authentication function. I'm 99% sure no one has modified a cheetah SPL to do so. Someone like pof or olipro (oh boy are they gonna kill me for this) would be familiar with problem, but unlikely inclined to work on it since they don't have this device.
I haven't seen any workable method around it. The cheetah bootloader doesn't support task 2a.
sux...
xrufusx said:
Is there any way through mtty to erase the radio rom so it will reload when a new rom is flashed?
Click to expand...
Click to collapse
No sir. The rest of this response is merely to reach the minimum 10 character limit. meh.
tmknight said:
Run through the cheetahunlocker again (all stages, regardless if they error out).
Then use the kaiserRUU to load the new radio .nbh
Click to expand...
Click to collapse
Well, after many attempts - this does not work for me.
I can't even get to Step 3 of the CheetahUnlocker...it errors out after Step 2, and does not let me continue.
I read something about once you flash the 1.54.xx.xx Radio Rom you can't change it b/c the Cheetahunlocker has been able to authenticate the newer Radio roms or something like that... is that true??? It seems so, b/c I can't seem to get it to work.
any advice?
thanks again
I also have 1.54.01.00 but I don't know how i got this radio firmware, not a single internet connection on my treo is possible. No matter the version of Win Mob (6 6.1) I use, my Treo 750 just won't transfer data over either 3g or gprs. Calls / sms are possible though.
Wich rom causes to load 1.54.01.00 radio firmware on my treo 750 ? I really wanna know what i did wrong.
Well for everyone that is stuck with that nasty 1.54.01.00 i may have a solution.
I managed to downgrade my treo 750 radio firmware to 1.12.0c.00.
!!!AT OWN RISK!!!
-Run cheetahunlocker only step 1
-continue till the bootscreen (3 colors)
-Removed USB cable
-Don't click Start Update!
Ran official Desktop updater from palm (update version 2.27)
-Went to Temp files (Start --> execute --> type: %temp%
-Went to Palm dir --> 750RecoveryTool dir (is hidden) --> open T750URT (
treo 750 update recovery tool)
-Follow on screen instructions.. After this is got a rather old radio version
Will now try to run the Normal update again.
jbstix said:
Well, after many attempts - this does not work for me.
I can't even get to Step 3 of the CheetahUnlocker...it errors out after Step 2, and does not let me continue.
I read something about once you flash the 1.54.xx.xx Radio Rom you can't change it b/c the Cheetahunlocker has been able to authenticate the newer Radio roms or something like that... is that true??? It seems so, b/c I can't seem to get it to work.
any advice?
thanks again
Click to expand...
Click to collapse
Sorry mate, seems it cannot be done with existing tools. I decided 1.54.30.10 is not very stabled and have tried several cobbled together methods to downgrade to 1.54.01.00, all with no success. Seems we must wait for someone with more skills and time to break this one open.
vollemaan said:
Well for everyone that is stuck with that nasty 1.54.01.00 i may have a solution.
I managed to downgrade my treo 750 radio firmware to 1.12.0c.00.
!!!AT OWN RISK!!!
-Run cheetahunlocker only step 1
-continue till the bootscreen (3 colors)
-Removed USB cable
-Don't click Start Update!
Ran official Desktop updater from palm (update version 2.27)
-Went to Temp files (Start --> execute --> type: %temp%
-Went to Palm dir --> 750RecoveryTool dir (is hidden) --> open T750URT (
treo 750 update recovery tool)
-Follow on screen instructions.. After this is got a rather old radio version
Will now try to run the Normal update again.
Click to expand...
Click to collapse
Nice find dude. Now there's hope for all who are stucked with radio 154xxx
WARNING
This is a HTC test rom and was never given to the general public
Note the rom and radio version
This could be of intrest to cookers and rom hackers
http://rapidshare.com/files/1784304...9.405.2_Radio_52.46.25.26_1.08.25.23_Test.exe
I wonder if theres any difference in 3G bands.
This wouldn't be something i would want to just flash to right? I should wait for a rom cook? Is there a chance of bricking my phone trying it?
Anyone? Can i try out this rom on my phone without risking a brick?
The instalation brick at 13% for me, when i reboot, i have the tricolor screen of the bootloader so no problem to flash another rom but this one doesn't work for me
The SPL 1.14 olipro may be the problem?
Anybody have just the radio extracted from the ROM?
EDIT: I have modified the htcrt.exe tool and added blackstone to the configuration files. I will post the radio in a little bit.
AllTheWay
You are to cool
HDuser said:
AllTheWay
You are to cool
Click to expand...
Click to collapse
Well I tried to flash just the radio.
I got a update failed error.
Blackstone said:
00018003 BLACIMG.nbh - fail
Upgrade ROM code error Please try again
Click to expand...
Click to collapse
I am downloading the stock ROM now to flash the radio cause I don't have stock blackstone radio by it self.
In the bootloader it reads RUUNBH
Upgrade ROM code error Please try again.
USB
Let us know.
Turb0wned said:
Let us know.
Click to expand...
Click to collapse
Everything is all good with the device..
Downloaded the WWE 1.19 ROM that cmonex posted. http://rs95.rapidshare.com/files/17....831.0_Radio_52.49a.25.26_1.09.25.14_Ship.exe
All is well.
No luck with this rom then?
Among other things, there's MFG SPL 1.07 bundled with this RUU. Avoid!
probably you set radio value to 0x300 in htcrt. problem - it must be set to 0x301.
AllTheWay said:
Well I tried to flash just the radio.
I got a update failed error.
I am downloading the stock ROM now to flash the radio cause I don't have stock blackstone radio by it self.
In the bootloader it reads RUUNBH
Upgrade ROM code error Please try again.
USB
Click to expand...
Click to collapse
stepw said:
Among other things, there's MFG SPL 1.07 bundled with this RUU. Avoid!
Click to expand...
Click to collapse
are you also getting the problem of screen not turning on after a resume with MFG SPL installed?
cmonex said:
probably you set radio value to 0x300 in htcrt. problem - it must be set to 0x301.
Click to expand...
Click to collapse
I tried to flash this radio once again. Radio fail 0x301 was set.
ICR
Hi there,
Is it possible to see if the ICR (in call recording) app is included in this rom like it was discussed in some other threads. They were talking about a test rom form HTC. And maybe could be extracted ?
Thanks
cmonex said:
are you also getting the problem of screen not turning on after a resume with MFG SPL installed?
Click to expand...
Click to collapse
Kernel is not loading, stuck in OEMInit if OS is booted from MFG SPL 1.07 loaded via USPL. Didn't try flashing it though...
Has anyone got this radio to work yet?
Not that I know of. Would like to be able to flash this radio.
AllTheWay said:
Not that I know of. Would like to be able to flash this radio.
Click to expand...
Click to collapse
People in Raphael forum have mentioned they tried it and high battery usage is the only "benefit"...
You dont meant that they tried it on the HD right?
Hi all,
My first time being a productive member of this great forum (or at least, I hope so ).
I've been wanting to flash the ROM on my Touch HD with Orange UK (something I've never done before), but as an "insurance policy", wanted to have a backup of the stock ROM in case I have he need to restore it, or need to send back the phone to Orange for some reason. After searching the Internet at large and this forum in particular, I was unable to find a dump of the same ROM version as the one I have (1.19.61.1) with Orange UK, so after an hour or more of searching and reading, I was finally able to follow the steps to extract the ROM from memory in .raw format and then reassemble it as an .nbh file using the itsutils tools and the Blackstone "Kitchen" tools. The reference ROM I used for the reconstruction process was this one (found through the forums):
RUU_BlackStone_HKCSL_WWE_1.19.831.0_Radio_52.49a.2 5.26_1.09.25.14_Ship.exe
Here are the complete details regarding the ROM I'm posting, from the Device Information program of my phone:
Operator version: 34.119.1.611
ROM version: 1.19.61.1 WWE
ROM date: 11/25/08
Radio version: 1.09.25.14
Protocol version: 52.49a.25.26U
The process seems to have gone smoothly, and I have ended up with ruu_signed.nbh file, which I have uploaded for you all on Rapidshare and Mediafire.
However, I have not actually flashed my device with this ROM (since this is the current ROM on my device, and having no actual experience in flashing yet, the result might seem a bit ambigious to me) I would really appreciate it if someone would verify whether it actually works or not, so people don't heap curses on me if it doesn't... I'm just a newbie, remember.
So without further ado:
http://rapidshare.com/files/228874929/Touch_HD_Orange_UK_1.19.61.1_WWE.rar
Mediafire:
http://www.mediafire.com/?sharekey=eb6c7c685fb1912708f8df73f2072ed6e04e75f6e8ebb871
This is exactly what i need! Hope its working for the both of us!
original spl
hi i might need to use your dumped rom - i will probably also need to reinstall my original spl (have used a hspl to flash cooked rom) - i noted down my original rom and radio, but not the spl - can you tell me what was the original spl with this rom?
thanx
protoism said:
hi i might need to use your dumped rom - i will probably also need to reinstall my original spl (have used a hspl to flash cooked rom) - i noted down my original rom and radio, but not the spl - can you tell me what was the original spl with this rom?
thanx
Click to expand...
Click to collapse
Orginal SPL 1.14.000
MrKaon said:
Orginal SPL 1.14.000
Click to expand...
Click to collapse
thx
hate to be a complete dweeb, but how do i flash this dumped ROM - its just a nbl file how how do i couple it with a rom update utility??
Guys, check this out. I hope, it will be usefull for you.
Blackstone_Orange_UK_1.14.405.3
11.Nov.08
http://rapidshare.com/files/16237350...Ship.part1.rar
http://rapidshare.com/files/16237926...Ship.part2.rar
http://rapidshare.com/files/16238323...Ship.part3.rar
P.S. it was found in this site.
http://forum.xda-developers.com/showthread.php?t=444170
Hey all,
I currently have the original ROM Version: 1.19.61.1 WWE and i am trying to update the SPL to a HSPL so that i can use cooked ROMs, can someone tell me why this isnt working? I used the HSPL from the sticky thread on this forum yet it hasn't changed anything......do I have to hard reset my blackstone after doing this? I am getting the error [240]:FILE OPEN telling me to update utility.
Thanks
What type of operation system do you have? Is it vista?
http://wiki.xda-developers.com/index.php?pagename=RUU_Errors - doesnt really apply to HSPL package though for your error code?
I have XP does that make a difference?
sergioiacobucci said:
I have XP does that make a difference?
Click to expand...
Click to collapse
Should make it easier as you don't need to update vista drivers as you're using XP.
Have you followed cRaCKwHoRe's guide to get HSPL or USPL onto your device. Follow link to his guide in my signature.
ERROR [240] - When this error message appears, check whether the downloaded image is placed in the directory of RUU. If, for some unknown reason, you find that the ROM image is not located in the RUU folder, you have to download the RUU and retry again. Check that the contents of the folder is a CustomRUU.exe file and an .nbh file. If you put the os-new.nb file in by mistake instead of the .nbh, this is the error that shows up.
just downloaded again and now im sorted ive got SPL-1.56 OliNex coming up in bootloader mode however my screen is all wierd colours which im hoping will fix once i flash a new ROM, which 6.5 ROM would you suggest? And also do the radio version have match?
Thanks
sergioiacobucci said:
just downloaded again and now im sorted ive got SPL-1.56 OliNex coming up in bootloader mode however my screen is all wierd colours which im hoping will fix once i flash a new ROM, which 6.5 ROM would you suggest? And also do the radio version have match?
Thanks
Click to expand...
Click to collapse
well browse the threads of some roms n u can know the best rom for u..
ya once u fash a 6.5 rom all screen problems will be sorted out.
for radio version, they usually are not included on cooked roms
Ok thanks! Its just im looking at downloading dutty's rom however this has a radio code on it does this matter do you think?
Thanks for all your help
sergioiacobucci said:
Ok thanks! Its just im looking at downloading dutty's rom however this has a radio code on it does this matter do you think?
Thanks for all your help
Click to expand...
Click to collapse
well ya it has the radio n well no probs cos its the 1.14 radio..
all's good..
thanks for all your help much appreciated
Ok, here's what i did:
I'm sending my xperia back to vodafone, so i need to restore stock rom and spl. I flashed a NL Vodafone R3AA rom (found here) to my phone yesterday, which worked perfectly. Did a hard reset, and went on with restoring stock spl.I tried using the special RUU with a replaced stock spl .nbh (the method described in one of the topics here), but the RUU couldnt find my phone. Since i didnt have another PC here, i tried to flash the .nbh to my phone via the micro SD method.
This went well, the progress bar filled up and disappeared, followed by 10+ minutes of "loading". Advised by a friend, i pulled out the battery, put it back in the device and powered it on. The phone instantly booted, showing the bootloader-screen and saying it's going to resume flashing the device. Followed by another endless "loading" screen.
But, since i got a chance to look in the bootloader-screen, I saw the SPL version was now 0.72.000 (or something like that, at least the OliNex text was gone). Afaik, this means the stock spl is back. I tried replacing the stock spl Kovsimg.nbh with the default one provided with the custom RUU (which is OliNex HardSPL, right?), but it showed the same "loading" screen. I havent tried flashing the rom again, since the bootloader says it's on stock spl at the moment...
What can i do? I guess they dont accept bricks over at vodafone...
Thanks in Advance,
Sorbo
using the usb cable and the ROM flashing Custom_RUU.exe
flash the R3A Rom again. that should fix it not booting!
You also need to flash the radio back to stock (not sure what version it is, but it's around here somewhere) otherwise you'll face flash issues. This means flashing HardSPL flashing the radio, flashing StockSPL again and return. Also, best flash R2A. Not sure if R3A was ever properly released.
Ok guys, thanks for the replies
Jonny4911 said:
using the usb cable and the ROM flashing Custom_RUU.exe
flash the R3A Rom again. that should fix it not booting!
Click to expand...
Click to collapse
The phone is back on stock spl, is it possible to flash a rom? Or only stock roms? (Sorry for my dumb question, havent been into flashing for a few months now)
aethelbert said:
You also need to flash the radio back to stock (not sure what version it is, but it's around here somewhere) otherwise you'll face flash issues. This means flashing HardSPL flashing the radio, flashing StockSPL again and return. Also, best flash R2A. Not sure if R3A was ever properly released.
Click to expand...
Click to collapse
Ok, thanks for the tip R2AA it is!
When flashing the rom the radio was also updated, but i'll try this
R3AA was properly released!
if you want to be cure of complete stock why not just use SEUS?
and there is no need to flash radio with stock ROMs as they're included, all your doing is flashing a radio extracted from a stock rom anyway! this means you don't have to hardspl
Jonny4911 said:
using the usb cable and the ROM flashing Custom_RUU.exe
flash the R3A Rom again. that should fix it not booting!
Click to expand...
Click to collapse
And this was the winning tip. Just flashed back the R3AA rom (vfone NL), even though i doubted if it would work (since the bootloader said it was back on stock spl), but it did.
Phone works again. Bootloader now says 0.78.000 (or something like that, no OliNex), so i guess it's ok now. RUU still isnt able to flash the phone, tried on 3 different pc's ( win7 x64, vista x86, xp x86), but i cant flash the phone...
Ah well, i'll try to send it back, see what they come up with. Thanks a bunch!