Related
Firstly...I'm with 3 in Australia
Ok, bought a TYTN II off ebay some months ago now from a Hong Kong dealer (that'll learn me) and it seems to not work with the 3G network here in Australia. The phone is always EDGE roaming and whenever it switches to 3G I can't send or receive SMS messages.
I've done some reading around and found that maybe I need to flash the ROM of the phone to an Australian one so that the phone will work properly. I found a thread on Whirlpool and someone there posted a link to this ROM for another user:
www.mediafire.com/?0jt1cwyx61g
Is that the ROM I want? If so, how do I go about flashing my phone with this ROM to make it work?
Can anyone help me??
You're more than likely having issues with the radio that came with the phone. Go to the ROM development forum, read how to unlock, install HardSPL, etc.. and then choose either one of the ROMs that come with a new radio available: NATF, Hyperdragon, Dutty's, etc... or look at one of the threads that show how to install a new radio. I'm not going to make any ROM recommendations, because it's really a matter of personal taste and how the ROM feels to you. For me personally, I've settled on T.i.R vk8 WWE build 19971. And I have radio version 1.58.25.17.
Hey dude,
congrats on the kick-ass new phone.
To help you with your prob, you'll have to signup and login to HTC E-Club for Australia, then download and flash the latest 3 ROM. Its the only way to ensure you have the correct inbuilt three network settings, there was a cab floating around a while back but it didn't include planet3 connectivity - only mobile internet.
look for this one :
HTC TyTN II WM6.1 ROM code for Hutchison ‘3’ Network customers
ROM version: 3.29.861.0
ROM date: 05/15/08
Radio version: 1.65.16.25
Protocol version: 25.83.40.02H
Date: 2008-06-02 Category: ROM Upgrade
I found the ROM development page and the list of radios that relate to the specific ROM's match the ones I already have (note: I already flashed my phone using the one in the link I provided in my first post).
I went and registered for HTC E-Club and went to download the WM6.1 ROM u mentioned Sanchez and when I entered the Serial Number it says the ROM is unsuitable for my phone. Is this because it is NOT an Australian phone?
Would this ROM actually work on my phone and would I be able to get a copy of it from somewhere else?
yeah, its not the actual ROM so much as the stuff Three bundle within that you need.
I'm aka Dr.Nerdlinger on whirlpool, a guy I recommended this to didn't have any problems, seemed to make his US Tilt into an Aussie Three TyTnII.. Havent tried it myself as Im already three branded.
http://www.andrewjstevens.com/2008/06/a-new-att-tytn-ii-tilt-by-htc/
from : whirlpool thread
How did you go Morphio, did that link help out any ?
Umm nah, I've also tried a much newer 3.29.861.0 ROM and that didnt help.
I dont know what to do
Morphio said:
Umm nah, I've also tried a much newer 3.29.861.0 ROM and that didnt help.
I dont know what to do
Click to expand...
Click to collapse
I have the latst official shipped TyTnII 3 ROM (WM 6.1) for Australia.
ie:
TyTN II_AUS Hutch_WM6.1_Upgrade_20080602 (may 2008)
Can't recall where I found it. I am fairly certain it was on this site
If you cannot find it through searchLet me know if you still need it.
Official 3 ROM
Morphio said:
Firstly...I'm with 3 in Australia
Ok, bought a TYTN II off ebay some months ago now from a Hong Kong dealer (that'll learn me) and it seems to not work with the 3G network here in Australia. The phone is always EDGE roaming and whenever it switches to 3G I can't send or receive SMS messages.
I've done some reading around and found that maybe I need to flash the ROM of the phone to an Australian one so that the phone will work properly. I found a thread on Whirlpool and someone there posted a link to this ROM for another user:
www.mediafire.com/?0jt1cwyx61g
Is that the ROM I want? If so, how do I go about flashing my phone with this ROM to make it work?
Click to expand...
Click to collapse
Dude... found it in seconds on google
Link to the ROM download
http://www.megaupload.com/?d=7J3L5LEE
I have flashed this ROM anytime I've had problems with others and it has always worked.
One question though, did Juvs Network Wizard not find 3 for you or it failed in some other way?
Congrats on your purchase and hope get as much out of it as I have
MaDing2000 said:
I have the latst official shipped TyTnII 3 ROM (WM 6.1) for Australia.
ie:
TyTN II_AUS Hutch_WM6.1_Upgrade_20080602 (may 2008)
Can't recall where I found it. I am fairly certain it was on this site
If you cannot find it through searchLet me know if you still need it.
Click to expand...
Click to collapse
This is the same one I used (3.29.861.0) and nothing seems to have changed, still doesnt register on 3G network
Morphio said:
This is the same one I used (3.29.861.0) and nothing seems to have changed, still doesnt register on 3G network
Click to expand...
Click to collapse
Damn! Sorry...
The ROM I posted the link to doesn't ask me for a "serial" when I've flashed it..
I assume you have run the Connection Setup wizard (Settings > Connections > Connection Setup?
Have you tried to manually enter 3's settings?
Perhaps flash the latest Hyperdragon III http://forum.xda-developers.com/showthread.php?t=397121
It has a suitable radio for Australia and I flashed this recently on a TyTn II purchased in Malaysia and all worked fine (as did the ROM I referred to earlier)
Ok but to flash to that (being a cooked ROM) dont I have to do something before I can flash to that? Is it HardSPL I have to install or something like that?
Yes... Unlock and flash a hard spl...
It is quite easy
Excellent directions here:
http://forum.xda-developers.com/showthread.php?t=356895
I am in no way an expert with these devices but I have had no problem that hasn't been quickly resolved.
perhaps unlocking the phone may resolve your problem with flashing the 3 shipped ROM.... (again, no expert here)
Ok seems this is not gonna work. I've done some reading and apparently the board it to blame for my phone not working properly. Since it was an eBay job (but from a company) I can still get warranty but I have to send overseas to HK.
What do people think, I can buy a new TytnII for $659 and when the old one comes back from warranty I can sell it. Would the new one (if I bought from Australian store) work on 3G?
Unless it's faulty hardware, it shouldn't need a return. Don't spend your cash just yet
Try this new official 3.34.721.2 WWE HTC rom, with 1.70 radio.
Download it, plug your activesync cable in, run the exe file you downloaded - after 20 mins or so, you should have the latest ROM, with built in Aus Three Network detection (assuming you have a legal 3 sim-card)
(ps. it may seem like its stalled while flashing, but just give it time)
Report back if successful
Downloaded and installed last night - doesnt seem to have made any difference
sigh...
Morphio said:
Downloaded and installed last night - doesnt seem to have made any difference
sigh...
Click to expand...
Click to collapse
After Flashing a ROM you should always hard reset the device as well. After all this is done, what versions of the following are showing as being installed: ROM, Radio, SPL (can find the last one in the tri colour boot screen - read the wiki if you need to know how to get to the boot screen)? If all of this is showing correctly and you're still having problems then it's probably something like the sim (just any old sim won't do and it needs to be compatible with the phone). You could try another if you have a spare. When you switched it on, after a minute or so did you get a message popping up asking if you wanted to automatically configure the phone for your networks settings?
Hi
Basically i just tried to download the latest ROM from HTC support and it wouldn't let me, kept saying "not suitable for your handset" after i put in my serial number. Basically e-mailed the support and they say that because my handset is orange branded, that I cannot download it from them. I have recently found another way to download the ROM, but in the email it said that orange may have made har or software changes to the phone. Will this mean that the ROM will not work? Have not yet tried for fear of bricking my phone!!!
Thanks
will most likely Brick it.
its the SPL that controls what ROMs you can flash.
That sucks.... my phone hasnt been updated yet, and is still pretty slow!
Cheers for the reply!
you can always flash a Hard SPL (i believe 1.37 is the preferred one).
you can flash back to the original ROM and SPL for warrenty reasons... i'd suggest making a note of the existing SPL version (can be found in Bootloader - Soft reset and Vol Down button).
Just checked, my SPL is 1.37.0000, does that mean I can update?
Orange have their own version of the latest 1.93 rom
It has MINIMAL changes - mainly the auto set up of Orange data etc
It's really fast and stable
Give that a try
You can dowload an up to date ROM from the Orange (UK) website - I downloaded it a few weeks ago. It is version 1.93.405.1. It works much better and quicker and has no Orange specific branding. Why not go for that one as then your warranty will not be affected
Hi, could you link that ROM, please?
Can't find it on the website.
Many thanks.
Here it is, enjoy it before Orange push out 1.97:
http://preview.tinyurl.com/4zc38s
Vodafone are already there:
http://devicehelp.vodafone.co.uk/diamondupgrade.php
Hy!
allenf said:
Here it is, enjoy it before Orange push out 1.97:
http://preview.tinyurl.com/4zc38s
Vodafone are already there:
http://devicehelp.vodafone.co.uk/diamondupgrade.php
Click to expand...
Click to collapse
Hello!For Orange this is 1.93 and not 1.97.If yoy know where I can find the newest version,please let me know.Many thanks.KOEND
Orange are still on 1.93...
Would anyone know if the latest version is still 1.93.405.1? Or if there is another recommended version? I tried "cookie" and the few he has released which were nice but had some minor issues.
right now my htc diamond orange is unlocked means i can use any sim in the phone,so if i upgrade diamond orange rom to 1.93.405.1 version as u described here so it will lock the phone or i can use any sim?plss tellll
Found here: http://www.htc.com/hk-en/SupportDownload.aspx?p_id=179&cat=2&dl_id=453
I couldn't get it to download with my S/N, maybe someone else can?
i cant either - i think your phone needs to be purchased directly from htc or you bought offline, if you bought fomr orange or vodafone etc then they are who you must get your upgrades from - sucks ;(
can anyone help?
looks like a minor update..not worth the headache of re-installing everything again.
I'll wait until we get hardspl and some custom roms with improved performance before I change my rom.
I got the following error message when I tried to download from the site:
Sorry, this software download is not suitable for your device.
I got the same error message too. I bought mine from Clove
Mine's HTC branded. :S So that should work, right?
Nara-e-Mastana said:
I got the following error message when I tried to download from the site:
Sorry, this software download is not suitable for your device.
Click to expand...
Click to collapse
Same here and bought from Clove. I submitted a service request to HTC asking how I can get the upgrade. WIll report back if I get an answer
Download from here: http://rapidshare.com/files/1727416....831.0_Radio_52.49a.25.26_1.09.25.14_Ship.exe
You'll need Hard SPL.
Nara-e-Mastana said:
I got the following error message when I tried to download from the site:
Sorry, this software download is not suitable for your device.
Click to expand...
Click to collapse
Same problem. Mirror that
However this rom is WWE but there is nothing to do with that rom, unless you bought your device in Hong Kong.
So, it's only for Asian devices?
Yes, you can find it there: http://forum.xda-developers.com/showpost.php?p=3035744&postcount=106
same for me
bought from Pixmania (french website)
Sorry, this software download is not suitable for your device.
i noticed that this rom upgrade is available for Hong Kong-English support
Huck33 said:
same for me
bought from Pixmania (french website)
Sorry, this software download is not suitable for your device.
i noticed that this rom upgrade is available for Hong Kong-English support
Click to expand...
Click to collapse
BECAUSE THIS IS ONLY FOR ASIAN DEVICES
is this WWE english version? I got mine from www.handtec.co.uk.
will this work? will it brick my phone? and how to install it?
(sorry for so many questions )
mascot4m said:
Same problem. Mirror that
Click to expand...
Click to collapse
same problem
How will this rom affect the hotfix ?
NeoS2007 said:
Found here: http://www.htc.com/hk-en/SupportDownload.aspx?p_id=179&cat=2&dl_id=453
I couldn't get it to download with my S/N, maybe someone else can?
Click to expand...
Click to collapse
This rom is posted before in the forum. I upgraded my HD last week from a dutch rom to this rom. It runs nice.
See this post from 12.12.2008.
jamonda said:
Download from here: http://rapidshare.com/files/1727416....831.0_Radio_52.49a.25.26_1.09.25.14_Ship.exe
You'll need Hard SPL.
Click to expand...
Click to collapse
ok I just downloaded it from here and tried. it started and when it get to 2%, error message came say "ERROR[294]: invalid vendor ID. this update utility cannot be used for your PDA phone. please check your update utility.
is there hard SPL avaliable for this device yet? if i install this update with SPL, will it brick my phone?
citrix1 said:
ok I just downloaded it from here and tried. it started and when it get to 2%, error message came say "ERROR[294]: invalid vendor ID. this update utility cannot be used for your PDA phone. please check your update utility.
is there hard SPL avaliable for this device yet? if i install this update with SPL, will it brick my phone?
Click to expand...
Click to collapse
Nope. You will need a soft or hard spl to flash when you don't have a HongKong device
Hi all,
I had an O2 XDA Stellar which I believe is the HTC TYTN II. However, this phone was stolen a couple of weeks back. I purchased a second hand one today which is sim locked to the orange network. I managed to break the lock by following the instructions on this link http://forum.xda-developers.com/showthread.php?t=433835. I followed the instructions word for word till step 5.
The problem is now though it accepts the SIM and I can dial out, I don't have any audio on the calls So I can call and my phone also rings when I receive a call but I can't hear the caller nor can I be heard at the other end
Also, I hate the orange rom (and I used to complain about the O2 rom) and I wish to use the default HTC WM 6.1 professional upgrade the problem again is that it asks for a serial number and my serial number starts with DCOxxxxxxxxxxx and it says that this is not a valid serial number
What do I do now? Has my phone become a brick Please do help I can't bear the thought of having one stolen and the other toasted by me
All help will be greatly appreciated
fmervin said:
Hi all,
I had an O2 XDA Stellar which I believe is the HTC TYTN II. However, this phone was stolen a couple of weeks back. I purchased a second hand one today which is sim locked to the orange network. I managed to break the lock by following the instructions on this link http://forum.xda-developers.com/showthread.php?t=433835. I followed the instructions word for word till step 5.
The problem is now though it accepts the SIM and I can dial out, I don't have any audio on the calls So I can call and my phone also rings when I receive a call but I can't hear the caller nor can I be heard at the other end
Also, I hate the orange rom (and I used to complain about the O2 rom) and I wish to use the default HTC WM 6.1 professional upgrade the problem again is that it asks for a serial number and my serial number starts with DCOxxxxxxxxxxx and it says that this is not a valid serial number
What do I do now? Has my phone become a brick Please do help I can't bear the thought of having one stolen and the other toasted by me
All help will be greatly appreciated
Click to expand...
Click to collapse
Did you actually read anything or did you just start hacking away ? I will cut and paste a few items out of that thread, so that you don't have to actually read it .
PLEASE READ THE *FAQ* BEFORE FLASHING OR ASKING QUESTIONS!!!
* IF YOU DONT NEED TO FLASH A NEW ROM THEN PROCEED TO STEP 6 TO PUT YOUR DESIRED RADIO BACK*
7. After I flash a Rom I dont have any sound in calls and the camera is black
The Radio has to match the version of Rom you flash i.e. WM6.1, an incorrect Radio will give sound and camera problems. Read The Ultimate Radio Thread to find a Radio that matches the Rom there are lots to try on there if one doesnt work then try another.
3. What are the different types of Unlock?[/B] (answer by DaveShaw)
The three stages of unlock are:
SIM: Allows you to use SIM's from another carrier. Can be done using codes or unlocker programs on xda-devs.
Security: Allows you to flash radios from another device - It does other stuff, but this is all the casual user will use it for
CID: CID unlocking is an old concept, nowadays you flash HardSPL instead. This lets you flash any ROM, Splash or Radio (depending on sec unlock) to your device. N.B. the CID is the carrier ID (e.g. HTC__001). The stock SPL's only let you flash ROM's that match the CID in the ROM image with the CID on your device.
Obviously you did not unlock your phone if a serial number is needed to flash a new rom. I would re read everything and do it again
Thanks for the reply
denco7 said:
Did you actually read anything or did you just start hacking away ?
Click to expand...
Click to collapse
As a matter of fact I did read that more than once.
denco7 said:
* IF YOU DONT NEED TO FLASH A NEW ROM THEN PROCEED TO STEP 6 TO PUT YOUR DESIRED RADIO BACK*
Click to expand...
Click to collapse
As you can see I'm a bit of a newbie here, so wasn't too sure if I did need to flash to a new rom. But I did anyway. And the call problems still remain
denco7 said:
7. After I flash a Rom I dont have any sound in calls and the camera is black
The Radio has to match the version of Rom you flash i.e. WM6.1, an incorrect Radio will give sound and camera problems. Read The Ultimate Radio Thread to find a Radio that matches the Rom there are lots to try on there if one doesnt work then try another.
Click to expand...
Click to collapse
I've been through this link as well and I was contemplating installing the latest version of the HTC WM6.1 ROMS (version 3.34.721.2, radio version 1.70.19.09) available at http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs However I was not sure if this would be ok and (at the risk of sounding extremely dumb) I was not sure what WWE stood for
denco7 said:
3. What are the different types of Unlock?[/B] (answer by DaveShaw)
The three stages of unlock are:
SIM: Allows you to use SIM's from another carrier. Can be done using codes or unlocker programs on xda-devs.
Security: Allows you to flash radios from another device - It does other stuff, but this is all the casual user will use it for
CID: CID unlocking is an old concept, nowadays you flash HardSPL instead. This lets you flash any ROM, Splash or Radio (depending on sec unlock) to your device. N.B. the CID is the carrier ID (e.g. HTC__001). The stock SPL's only let you flash ROM's that match the CID in the ROM image with the CID on your device.
Obviously you did not unlock your phone if a serial number is needed to flash a new rom. I would re read everything and do it again
Click to expand...
Click to collapse
I maintained the default that was given by the unlocker for the CID (I think all zeros). Do I have to change this as per the ROM image? I don't mind re-doing this again it's a relief that my device isn't busted
No your phone isn't busted. Go into bootloader and check what it says next to spl, if you followed Mark's steps, it should say 3.29 Hard. If that is what it says ,then you can flash any Kaiser rom you want. If it doesn't then start over again.
WWE stands for World Wide English and those roms are all in English. That rom you picked will be fine, if you do not wish to explore the fine world of custom roms ? Maybe later.
You only have to CID unlock once by following the steps, not at every rom flash.
No sound means wrong radio, 6.0 roms need 6.0 radios and 6.1 roms need 6.1 radios. If the rom has a radio in it already then flash away.
Thanks Denco Flashed the ones I mentioned and it works perfect. Can't believe I actually have a working device Thanks for all your help, really great.
Now to sync my data to my new (second hand) htc and I'm good to go
Another question, the device works fine, however since it is a HK rom, it seems to have localised to HK. I've changed this as much as possible to UK. However, I'm wondering if this will affect anything else? For example the gps? Is there any quicker way to configure this globally so all settings use UK instead of HK?
Why didn't you flash the latest UK ROM.
Use this code: HT750GB02264 to download from HTC's site.
fmervin said:
Another question, the device works fine, however since it is a HK rom, it seems to have localised to HK. I've changed this as much as possible to UK. However, I'm wondering if this will affect anything else? For example the gps? Is there any quicker way to configure this globally so all settings use UK instead of HK?
Click to expand...
Click to collapse
Once you are unlocked and HardSpl'd you can flash any rom you want. Pick a UK one another WWE rom or a custom rom. Test a bunch until you have one you like. Your only restriction is it has to be a Kaiser rom. And with all the Kaiser roms available, it is not a restriction at all.
Mister B said:
Why didn't you flash the latest UK ROM.
Use this code: HT750GB02264 to download from HTC's site.
Click to expand...
Click to collapse
Wow, thanks for that, I was looking for a valid serial through which I can download from the htc uk site One question I had is do I install the radio which I download from htc? Or do I keep the one I have already flashed? The one I have flashed yesterday seems to be a later version than what I've downloaded from htc
denco7 said:
Once you are unlocked and HardSpl'd you can flash any rom you want. Pick a UK one another WWE rom or a custom rom. Test a bunch until you have one you like. Your only restriction is it has to be a Kaiser rom. And with all the Kaiser roms available, it is not a restriction at all.
Click to expand...
Click to collapse
1. I keep hearing on this forum about Hard SPL, I'm not sure what this is used for or why it is required but I followed the instructions and it seems I had installed JumpSPL1.56-KAIS.exe. Now, since then I had flashed the rom, so do I need to reinstall this again? Is there some other one I should be using? I come across different versions on some threads. Also, how can I check the version of HardSPL I have?
2. When I view the memory (under settings) it shows me Storage and Program. However, I can't seem to see any storage area in file explorer. I know in my old xda 2i, there used to be a separate storage area. The reason is because some of the apps I install are quite bulky for example lexisgoo english dictionary (the dictionary files themselves are about 18mb) and this fills up the main memory. How can I install this in the storage memory? (not storage card since I sometimes swap storage cards)
Sorry lot of questions I know, but I'm a newbie and all help will be greatly appreciated
The UK downloaded ROM will install the radio too.
I would do a bit of testing with your current set-up, then flash the UK ROM.
Test the new UK ROM & radio & then reflash the radio only if you want (do some searching on Radio versions)
Newer versions are not always best, chasing the latest builds normally bites you in the ass at the end of the day.
Check HardSPL by going into bootloader:
* Using a stylus, press and hold the soft reset button at the bottom of the phone along with the camera button
* Release both buttons once the bootloader screen appears
* Exit bootloader by pressing soft reset button
Once you have installed HardSPL thats it, job done (you installed it during unlocking)
What you see in file explorer regarding storage is correct: 128MB RAM for running software ect & 256MB ROM for storing your programs ect (WM2003SE was different)
ROM can be increased by using one of the cooked lite ROMs if storage space is a concern.
Mister B said:
The UK downloaded ROM will install the radio too.
I would do a bit of testing with your current set-up, then flash the UK ROM.
Test the new UK ROM & radio & then reflash the radio only if you want (do some searching on Radio versions)
Newer versions are not always best, chasing the latest builds normally bites you in the ass at the end of the day.
Click to expand...
Click to collapse
Will do, the HK version seems very stable, the only thing that bothers me is the region settings. Anyway, I think I'll give the UK Rom a go and if that works well I'll stick with it
Mister B said:
Check HardSPL by going into bootloader:
* Using a stylus, press and hold the soft reset button at the bottom of the phone along with the camera button
* Release both buttons once the bootloader screen appears
* Exit bootloader by pressing soft reset button
Once you have installed HardSPL thats it, job done (you installed it during unlocking)
Click to expand...
Click to collapse
I checked the version and this is what it showed:
KAIS130
SPL-3.2.9.Hard
CPLD-8
Click to expand...
Click to collapse
TBH, I don't know what any of that means But do you think the version I have is ok, or do I need to upgrade this to some other version?
Mister B said:
What you see in file explorer regarding storage is correct: 128MB RAM for running software ect & 256MB ROM for storing your programs ect (WM2003SE was different)
ROM can be increased by using one of the cooked lite ROMs if storage space is a concern.
Click to expand...
Click to collapse
I've attached a screenshot of my memory screen. The bit that puzzles me is that the storage area apparently has a lot more storage but I do not have an option to install all my applications on that area or atleast the bulky ones. I don't think I need a lite one since I do have 112MB free in the storage area which is more than sufficient for all the apps I usually install. Can you advise how I can install apps to the storage area as well?
Lastly, I was wondering if it is possible for me install my apps on the rom and then kind of take an image of my setup and flash the rom with this setup. That way when I do a hard reset, all my apps are installed again. Which will save me the trouble I know sprite backup does something like this but I'd prefer if it was in the rom
Thanks for all your help, it has given me a lot of confidence in these matters. Something I probably wouldn't have attempted
Mister B said:
Test the new UK ROM & radio & then reflash the radio only if you want (do some searching on Radio versions)
Newer versions are not always best, chasing the latest builds normally bites you in the ass at the end of the day.
Click to expand...
Click to collapse
I agree 101% and it appears fewer resources are put into ironing out bugs in the WM 6.1 ROMs than the WM 6.0 ones. I replied to fmervin's post in the ROM forums along these lines.
If all is running OK I would stick with your current HardSPL.
When installing your applications choose the option of installing to "Device"
You could install all your apps into a ROM, this would be cooking a ROM & is a complex process.
I would suggest a backup via Sprite or SPB. I use SPB v2.0 build3065 & it works well for me, preference of backup software is a bit of a Marmite scenario, you either love it or hate it.
Lastly, I was wondering if it is possible for me install my apps on the rom and then kind of take an image of my setup and flash the rom with this setup. That way when I do a hard reset, all my apps are installed again. Which will save me the trouble I know sprite backup does something like this but I'd prefer if it was in the rom
Click to expand...
Click to collapse
You can't do that, it is flash memory. It's not like you can partition the hard drive.
But this is the easiest way to get your Apps and settings back after a flash.
Try this Sashimi Auto installer by a former XDA member. It is a nice little program that installs all your apps after a flash
http://www.winmo-experts.com/viewtopic.php?f=7&t=4
Help Please
Hey Denco..Than'x for considering my thread & giving out suggestion towards the link to check the info. But i m really nt that techy afterall so i can burn a ROM on my Tytn II. Even though i tried to burn a RUU rom that supports TyTN II ..Its just gets disconnected from USB mode..So i was looking forward to start it initially with some comparatively easier to install .cab files..Can't these RUU files be transformed into .cab files or maybe some other version of Manila 3D cab file that is completely fixed...I seriously have done a lot of research upon this but nothing looks like working. So please if you have some links to .cab files that can give a better & different look to my Kaiser running Windows 6.1...It'l be a great help !!
Than'x & regards in advance
vicky_crispy said:
Hey Denco..Than'x for considering my thread & giving out suggestion towards the link to check the info. But i m really nt that techy afterall so i can burn a ROM on my Tytn II. Even though i tried to burn a RUU rom that supports TyTN II ..Its just gets disconnected from USB mode..So i was looking forward to start it initially with some comparatively easier to install .cab files..Can't these RUU files be transformed into .cab files or maybe some other version of Manila 3D cab file that is completely fixed...I seriously have done a lot of research upon this but nothing looks like working. So please if you have some links to .cab files that can give a better & different look to my Kaiser running Windows 6.1...It'l be a great help !!
Than'x & regards in advance
Click to expand...
Click to collapse
I think you need to decide what it is that you want to accomplish. Unless you cook your own rom, there is no way to add apps to the rom ( so that they will remain after a hard reset) Your rom is wyour phone's base operating system, it contains your OS (WM 6.1 ) and can only be replaced after completely erasing and replacing all files from the previous rom.
If it is a new rom you want, pick a rom that interests you and follow these instructions verbatim .
http://forum.xda-developers.com/showthread.php?t=433835
Your phone will go to the bootloader screen ( three color) and it will disconnect from usb during the process, but be patient until the end. When it says it takes ten minutes, it takes ten minutes. Leave the room if you have to , to keep from getting impatient.
If you just want to keep your OEM WM 6.1 and keep it simple, but change the look of your phone try this,
http://www.htcwiki.com/page/Manila+2D+and+M2D+Themes
This will change the look and feel of your phone with uninstallable .cab files and will not affect the rom or brick your phone by accident.
Ok, so I tried installing the WM6 rom on my device without knowing it was in fact a Harrier and not a Blue Angel. I now realize I was very stupid in doing this. Now when it boots I get the stripes on the screen and "No GSM, D 5.60.00 WWE" written in the bottom right corner of the screen.
Does any one have an original Harrier rom they could upload so I can flash it back to the original WM2003?
If no one has that, is there a way to copy the rom from another, identical device?
xplode has a great firmware archive, where you can find about any original shipped rom, for the harrier, you find it here: http://firmware.atspace.com/Harrier.html
Thanks Chef_Tony. Thats got it working again perfectly.
i have the same problem it now says no gsm ....
what software do i need to make it work again ?
thx
andy
gripperwod said:
i have the same problem it now says no gsm ....
what software do i need to make it work again ?
Click to expand...
Click to collapse
Hit the link that Chef Andy listed, find your carrier in that list and download the latest one available
what i meant is which 1 do i download from the link chef andy left do i just use the upgrade tool or radio if so how do i find out which version i need ?
thanks
andy
gripperwod said:
what i meant is which 1 do i download from the link chef andy left do i just use the upgrade tool or radio if so how do i find out which version i need ?
Click to expand...
Click to collapse
Again, find your carrier (I'm assuming that the phone was running the official ROM that it shipped with for your carrier) in that list and download the latest one available. No one can tell you which one to download as no one else but you knows who your carrier is.
The radio version doesn't matter in this situation as the OS is coded to deal with a CDMA radio stack, and most, if not all, official ROM flashers will flash the radio stack with the OS. You are going to have to flash it back to whatever OS and build (usually WM2003 for the Harrier) is provided in the archive. If there are multiple versions of the ROM/radio available, generally the newer ones are the better ones.
You shouldn't need anything special for this as you will be flashing the official ROM for the phone. Download, run the executable and follow the on screen instructions.
ok ive downloaded all from these links and it tells me each flash ..
the rom image is not designed for your device . error code is wrong country code !!
i tried simunlock and now have no gsm showing in boot .
it was on uk orange network the phone is spv m2000
thx
well, your device is a blueangel, this thread is about the harrier. it deals with people trying to recover their CDMA devices after a bad flash, you have a GSM device, a completely different phone, and also, the source of your problem is not the same. thank god, the flash did not work, or your phone would be bricked for good.
you need to do a completely different procedure:
1. you go to xplode's BLUEANGEL firmware archive at http://firmware.atspace.com/Blueangel.html and download any rom in your language / from your country. then you put your device into bootloader mode and flash the device using maupgradeut_noid, found here: http://rapidshare.com/files/322928773/Chef_Tony_RUU.zip
2. then, when you have wm2003 back, please post back for further steps to go.
thank you i will do as you said and report back thx mate , ps are you realy a chef because i am lol i have been a chef around 26 years.
ok downloaded the orange uk but its file is corrupt so executable failed ...
looks like im not going to win ..
tried other orange uk files further down the list but still says country error code.
yes, the country id error is the reason, why you need to extract the 40mb exe file, put maupgrade in there, from the link i provided earlier, another thing to avoid the country id error, is to put the device into bootloader mode before starting the upgrade process, so, before you put the blueangel into the cradle, you press record+power+reset, until the display shows "Serial" and "V2.0x" where x is a number from 5 to 7, then you connect the device and start maupgradeut_noid.exe, which has to be in the same folder as the nk.nbf and all the other needed files. using the maupgrade instead of the BAupgrade and using the bootloader mode avoids nearly all the errors, like country id, device id and so on.
EDIT: btw. i am not a chef, i am a system administrator, the avatar and username are just my regular online name, named after the most ridiculous chef on american tv ^^
gripperwod said:
thank you i will do as you said and report back thx mate , ps are you realy a chef because i am lol i have been a chef around 26 years.
Click to expand...
Click to collapse
Tony is right, your phone would have been bricked.
For future reference, when you post, make sure to list your carrier and the exact model of phone. Anyone in these forums needs this info to attempt to offer the correct information to help.
In my posts, as Tony mentioned, this thread was dealing with Harriers, the CDMA version of the Blue Angel. When you jumped in, I thought that you were talking about a Harrier as well.
Keep in mind that each phone has it's specific ROM designed for that single model of phone alone, they are not interchangeable.
hi
after long time thought i might have another go ...
all the links you have supplied dont work eg: file is corrupt is the message im getting when trying to install software to pc.
i need the factory cd rom for the : orange spv m2000
i have no gsm on the phone since i upgraded the phone to wm6.5
ce os 5.2.21169 (build 21169.5.0.0)
please help
thx