One thing I've never been able to figure out is how to customise network settings as the automatic Connection Setup has never worked properly for me.
I'm using Virgin Australia as my operator and the connection setup always detects it as Optus and configures it accordingly.
I then have to go into Connections and change the Access Point it uses to connect (instead of 'internet' it's 'VirginInternet') and then it works fine.
Is there some way I can do this via registry key in my SDconfig.txt or hack the connection setup util to do this properly? (I've tried updated versions of the connsetup too but none of them do it properly).
If anyone can point me in the right direction I'd really appreciate it.
if you have a virgin mobile simcard that should take care of everything for you.
I do, but it doesn't work as I've mentioned.
Maybe it's something to do with my number originally being ported from Optus to Virgin (though I definitely have a Virgin mobile sim).
Funnily enough, the operator is recognised on the front manila tab as Virgin - it's only in the connection setup that it gets it wrong every time, and I'm sick of having to change this manually every rom install.
If anyone has any solution to this problem, let me know.
So how long have you been dealing with this? Have you been billed by Optus for using their network? If the front page is showing virgin mobile I think you should be good. My old Samsung Blackjack used to say i was on Rogers, when in fact it was on Fido, a subsidy of Rogers.... I would call virgin mobile and Optus if I were you to get this sorted out.
No - I'm not getting billed by Optus.
Reason it's defaulting to Optus is that Virgin are using Optus's network in Australia and basically onselling it or whatever the term is. They're like a virtual provider I guess you could say.
I can't use the settings that are auto-configured - it just won't work at all until I change the access point name.
Unfortunately, knowing this doesn't help me at all - hence why I'm trying to find a way to automatically fix this every time I do a rom install - so if we get back to my original question - does anyone know of any way to change the default access point name via a registry change or any way I can 'fix' the connection setup app to do the right thing for my phone.
Radix999 said:
No - I'm not getting billed by Optus.
Reason it's defaulting to Optus is that Virgin are using Optus's network in Australia and basically onselling it or whatever the term is. They're like a virtual provider I guess you could say.
I can't use the settings that are auto-configured - it just won't work at all until I change the access point name.
Unfortunately, knowing this doesn't help me at all - hence why I'm trying to find a way to automatically fix this every time I do a rom install - so if we get back to my original question - does anyone know of any way to change the default access point name via a registry change or any way I can 'fix' the connection setup app to do the right thing for my phone.
Click to expand...
Click to collapse
I have the same problem, did you find an answer?
Related
Does somone know how to solve this issue?
When I trigger an email update on the phone I continually get a warning asking me if I am okay with using data while roaming?!?!?!
Does the phone automatically think I am roaming because it is Australian? Is there a Windows Mobile Setting somewhere where I can define that my home market is Canada?
Some help here would be sincerely appreciated. Thanks in Advance...
you might try going into the account setup on the automatic send/receive page under advanced settings there is an option to use automatic send/receive schedule when roaming
Thanks for this response...I was hoping for a setting that would change the phone to make Canada as my home market...I am also getting SMS messages showing time 3hrs behind me (i.e. USA West Coast Time...)
Thanks Again, help anyone?!?!?!
Settings -> Regional Settings
Try changing that to your own country?
I wouldn't know otherwise.
Not particularly familiar with Telstra issuses, my phone was from UK running a standard rom with no carrier customisations/carrier lock and running on Optus HSDPA.
Never have these problems - I know i still roam onto the Telstra network eg is train tunnels etc.
Try using the in the Settings/Control Panel -> Connenctions-> Connection Setup. Country = Au, Operator = Telstra.
But I'm not sure if you have that icon since you are carrier locked (i'm guessing) to tel$cum.
If no one else is replying because its a region/carrier/rom specific issue try asking the question @ http://forums.whirlpool.net.au/
Hello all,
I have searched these forums high and low, but could not find a solution to my problem. I have a Kaiser which I use on the Canadian provider Fido. Since late 2004, Fido is a wholly owned subsidiary of Rogers, another Canadian wireless provider. Fido and Rogers now share one same network: Rogers'. My problem is that my Kaiser, having a Fido SIM in it, seems to always think it is roaming because it is connecting to the Rogers network. This causes me a problem since I cannot tell my phone to only download when on my home network, otherwise I would never be able to download anything (since I am always roaming). If I tell my phone to download even when roaming, I cannot control my usage when I actually am roaming in another country. I know there must be some kind of setting somewhere that I can adjust to make my phone think it is not roaming while connected to Rogers' network, I just don't know what it is. No matter what ROM I try, I can't get rid of that pesky "roaming triangle"! My gf's phone, a Samsung Jack, does not think it is forever roaming, so I know it is possible.
Does anyone have any insight on this?
Thanks in advance!
Dom
Hello there.
I have used my kaiser with Saudi Sim card, Lebanese Sim card, Jordanian Sim card and now FIDO sim card. Ive always had this triangle and has never affected my data plan.
bteljuice said:
Hello there.
I have used my kaiser with Saudi Sim card, Lebanese Sim card, Jordanian Sim card and now FIDO sim card. Ive always had this triangle and has never affected my data plan.
Click to expand...
Click to collapse
Me too, I even had my roaming turned off by Fido for some time and the triangle was still there.
Thanks for the input, guys. I know that the roaming icon will not prevent me from accessing 3G data. What it does prevent me from doing, though, is differentiating between "real" roaming (i.e. in another country) and "fake" roaming (i.e. on the Rogers network). As it stands, all settings which can be set to "use 3G data only when not roaming" are ineffective as I would never be able to download anything if they were enabled.
I hope that clears things up. And I hope that someone smarter than I am has a solution for this problem.
Thanks again!
Hello, I have the exact same phone on the exact same fido network and have the roaming triangle as well. It does not affect your data/voice plan at all. (ie. if you are in the Canada, you will not be charged for roaming). This is all explained in the following link:
http://howardforums.com/showthread.php?t=837503
Essentially the gist of it is that you are "roaming" on the rogers network, but since they are the same company, it doesn't matter or affect any of your plans. I have used my 6GB data plan from Fido with no extra charges.
It does effect some programs that do provide options for disabling web traffic when roaming (ie. hotmail push e-mail from windows live) as these programs will always think you are on another network.
What I have done is, predominantly, I use my wifi connection where available and have turned off all the "disabling traffic when roaming" options in various apps. Then in the fido internet (3G;GPRS) settings, I did not include the password. What this does is that when I connect to the internet without wifi it asks me for my password which I then enter to connect. Definitely mildly inconvenient, but prevents me from 'accidentally' connecting to the internet when in the US.
Thanks ibhimani.
I have taken similar measures to prevent roaming fees, but I use MoDaCo's NODATA app, instead. Basically, it allows me to completely turn off all cellular data connections (WiFi remains intact) while I am away.
Still, I don't think this is a real solution; it is a workaround at best. I know there is a way to force the phone to recognize the Rogers network as a "Home" network since my gf's Samsung Jack does not claim to be roaming at all times. I will try to look through the registry on the Jack to see if there is some setting I can tweak to achieve the desired effect. I'll let you all know if I find something.
That would be great. Thanks in advance.
No luck!
Hi all,
After a little research in the registry of my gf's Samsung Jack, I've found that the way the network is handled on it is different than on our HTC. The Samsung uses something called MITSMan.exe (Mobile Intelligent Terminal by Samsung Manager) which can identify the network correctly on her phone, but not on ours. Unfortunately, this is not reusable for us. The search continues. Hopefully, a WinMo HTC device will launch on Fido sometime soon so I can reuse something from it.
If I find anything else, I'll post it here.
I have a Nokia e62 and the Samsung Jack from Fido. Both these phones do not show the roaming icon. Must be some sort of custom firmware brewed for Fido by the manufacturers.
BTW - I am now using a Samsung Omnia II. This shows roaming too.
hameedx said:
I have a Nokia e62 and the Samsung Jack from Fido. Both these phones do not show the roaming icon. Must be some sort of custom firmware brewed for Fido by the manufacturers.
BTW - I am now using a Samsung Omnia II. This shows roaming too.
Click to expand...
Click to collapse
Hi hameedx,
With a Samsung Omnia II, you may be able to make a change to the registry to make it think you're on the home network, if it works like the Samsung Jack. On your Jack, search through the registry for something called MITSman. There should be a value corresponding to Fido's carrier code (MNC-MCC), which is 302-370 (or 302-720, which is Rogers'). It may actually be easier to search for these values. If the Omnia also uses MITSman, then you might be able to make the registry entries on it look like the ones on the Jack. If you need more detail about the registry entries, I could get them when I have access to a Jack again.
I searched the Jack's registry for anything with 302 720 370 72 37. Couldn't find any meaningful entry. Perhaps it is a DLL that we need to replace?
I believe that the Fido Samsung Jack has roaming indicator disabled completely. I used a Telus SIM in the Jack and does not show roaming. The Telus SIM shows roaming when I put it in other unlocked phones.
I have posted this plea elsewhere, but without getting any help ... pls forgive the cross-posting.
I've left my Canadian GSM carrier for lousy coverage, and my Xperia X1a is now with Telus HSPA. The phone works well, but I yet haven't figured out how to setup the X1a for HSPA data (leastwise, as it is now, if I try to 'QuickGPS' I get a connection failed message). If this cannot be remedied, I may as well not pay for data.
The phone also nags me because it believes the connection with the carrier is generally not setup properly. It's as if it has a list of Canadian GSM providers, and there are no other possibilities(?)
Please advise ...
TIA & cheerios from the Avalon Peninsula, Newfoundland
you would have to manually set up the data information as telus set up is so new no chefs have cooked that information into their ROMS.
Call telus and have them tell you the best settings to use.
They may also have to refresh your profile to allow you phone to be recognized properly as their settings used to be hardwired into a different set up then sim cards.
Cosmic Blue said:
you would have to manually set up the data information as telus set up is so new no chefs have cooked that information into their ROMS.
...
Click to expand...
Click to collapse
That may be the primary problem. That is, I haven't yet found a way manually set these parameters, and as a "unsupported device", the Telus person may not be Xperia-savvy any more than I.
However, if I read you reply correctly, I should be able to choose to manually configure the phone for Telus HSPA, voice & data(?) All that I've been able to find is an options list that shows all the Canadian carriers, and I'm supposed to choose one (which presumably automatically configures the phone for that carrier). I was hoping to see "other", the selection of which would take you to a dialog that would allow manual configuration(??)
you can manually do the connect setting by going to settings - connections - connections and then enter information desired.
Do not use the connection set up because that wull give a list of recognized providers from the xml files.
Hi,
I would like to be able to modify my AT&T radio and change the default Mobile Network Code for my carier, is there any software to make easy to modify the ROM file ?
Thank
I'm not quite sure I understand what you're asking, but a radio will work on various different networks, depending on which SIM card you have in the phone. So I'm not sure that it's in the radio that you need to look.
What is it that you're trying to achive exactly, why do you want to change this code ?
Well, here is my problem;
I bought a Tilt 2 on ebay, and I also get an Unlock code for it. I have inserted my Bell SIM and the phone work correctly. I have configured the APN setting correctly and now I have internet without any problem.
The only bad thing is that the phone always think i'm in roaming, but that's not true. I have to deactivate all setting about roaming check, it's not a big thing but If I got to USA I will be charged for real roaming. and another downside is that many application pup info about roaming and data charge.
I'm searching since couple days to found a solution, and I'm pretty there is one but I have not enough knowledge on programming stuff. I've look all every registry in my phone and no one can't correct this ''roaming'' situation.
That's why im turning to Radio, since this phone is an AT&T, it's propbably seaching to compare SIM network provided and ROM network. I've found an interesting site about MMC/MNC http://en.wikipedia.org/wiki/Mobile_Network_Code
and found that the default network for AT&T is 310-410. Here in Canada We have bell and telus that use same technology then AT&T (UMTS 850 / UMTS 1900).
I would like to change the default ''home'' network code to 302-880. because my Sim Provided IMSI is 302-610 (Bell).
So to make it short. I want to change the default ''HOME'' network 310-410 to 302-880 so the phone will not be in a roaming profile.
Hope that someone can help me, and I'm pretty sure many people will appreciate this fix.
Thank You.
I don't know much about this, but surely it's your SIM card that is providing this code ? Since I could buy an unlocked Tilt 2 and put my own SIM card in it, and use it fine here in the UK on a UK network.
I can't believe that your phone thinks it's roaming just because it's a Tilt 2.
Yes, I found in my registry ProvidedIMSI="302610" that is the SIM registred network 302610 Bell HSPA network. So my SIM is telling the phone to use this network, but there is something in the phone that say it's roaming and not a home network. and I need to find and change this.
I'm not the only one in this situation and i would like to find a fix.
i have no knowledge about this only thing i can think of at the moment is just change the current radio version and flash a new rom. the latest version for radio is
4.49.25.95
and is found here ------> http://forum.xda-developers.com/showthread.php?t=549939
follow the right steps. [:d]
best of luck
Yes, I've updated the Radio to the latest version and still have the problem of ROAMING. i've try 2 old radio and always got the roaming icon.
Any other input will be accepted!!
Thanks
BiOs2k said:
Yes, I've updated the Radio to the latest version and still have the problem of ROAMING. i've try 2 old radio and always got the roaming icon.
Any other input will be accepted!!
Thanks
Click to expand...
Click to collapse
I read somewhere that roaming starts when you are out of your area code range.
But you can try this too
go to ------> setting ---> personal ------> phone -------> Network (in the bottom tabs)
In the network tab click Find Network and make sure it is the same network you are using.
Network selection should be "Automatic".
Now in next tab BAND
select network type to "GSM" and GSM/UMTS band to "Auto".
Try this and let me know if this work else i will ask somebody knowledgeable like Sir Phunkee
the show stopper said:
I read somewhere that roaming starts when you are out of your area code range.
But you can try this too
go to ------> setting ---> personal ------> phone -------> Network (in the bottom tabs)
In the network tab click Find Network and make sure it is the same network you are using.
Network selection should be "Automatic".
Now in next tab BAND
select network type to "GSM" and GSM/UMTS band to "Auto".
Try this and let me know if this work else i will ask somebody knowledgeable like Sir Phunkee
Click to expand...
Click to collapse
I've play with these setting and nothing seem to work.
But maybe I found something interesting.
I've just test the phone with a ROGERS SIM card and I get 3G signal and i'm NOT in roaming mode..
Now, What that mean ? Rogers 3G is UMTS/HSPA 850/1900MHz same as BELL.
Why it say Roaming when phone is connected to BELL with BELL Sim and not on ROGERS SIM??
Could someone help me with that ? fix, cab, anything ?
Thanks
rooming
Hi
I do not know think you want to do with your tilt 2
Why you don't do a hard SPL and install a cocked rom !! as energy
I am using a tilt purchased from AT&T without contract
I get a unlock cod from the internet then I do a hard SPL it and install the energy rom in, is work like a charm with Rogers, without any problem( only the gps wish I never try
Perhaps this is can resolve your problem you should try
thanks
Already done Cjoco My Tilt 2 is Unlocked and Hard-SPL with latest EnergyROM.
Like I said before, SIM ROGERS work like a charm in my phone, No roaming warning. but with BELL and TELUS SIM I get the Roaming notif but it's not true, Im connected to BELL and VOICE,DATA,etc. work #1.
People say that it work with ROGERS because this carrier have a fallback signal if 3G is not available, with BELL if I lose 3G signal my phone doesn't work.
BiOs2k said:
I've play with these setting and nothing seem to work.
But maybe I found something interesting.
I've just test the phone with a ROGERS SIM card and I get 3G signal and i'm NOT in roaming mode..
Now, What that mean ? Rogers 3G is UMTS/HSPA 850/1900MHz same as BELL.
Why it say Roaming when phone is connected to BELL with BELL Sim and not on ROGERS SIM??
Could someone help me with that ? fix, cab, anything ?
Thanks
Click to expand...
Click to collapse
then i think problem is with your sim card not with your phone. Just get your sim card replaced and i am sure the problem would be resolved.
the problem may be with his sim card, but im not sure replacing it will fix anythibng. im also with bell and have the same problem on my fuze.
bios2k, how old is your sim card?
bobzero My SIM card is 2 Week Old. so, i'm not sure it because my SIM is old.
I'll give a call at tech support @ BELL to see if they know why it doing this. I'm not sure if they will be enough good to explain this situation.
I've read last night on many forums the RILPHONE.DLL could be a possible cause of our problem.
In my config I can select GSM(850,1700) + UMTS(850,1700) but there is no option to select UMTS only. so maybe the phone is searching for GSM first (rogers) that's why when I insert a ROGERS SIM my phone is not roaming.
Is there a way I can extract RILPHONE.DLL for our EnergyROM or Stock Tilt 2 rom. Maybe I can ask a Programmer to take a look at this DLL to see the code.
I'll let you know.
I've just talk with BELL technical support and they have no idea why I'm the phone say it's in ROAMING. I've talk to the billing department and they say I don't have any ROAMING fees, so nothing to worry about..
Now, I'm still at the same state = no solution
Same here.
I was checking around and found many got this problem, including BBs. Now, some claimed that after upgrading the O/S for his BB, it went away. Another person with different device upgraded his O/S and started having that problem, and it wasn't there with stock ROM.
Make me think it has to do with the software side of thing and nothing to do with SIM or radios. To pinpoint what is causing it, can be a tough task though.
scooper True, Hard task for people that don't know much about programming ROM and files, but maybe we can have help from other that wanna look at our problem.
I'm available to test if someone want to Help us .
BiOs2k said:
scooper True, Hard task for people that don't know much about programming ROM and files, but maybe we can have help from other that wanna look at our problem.
I'm available to test if someone want to Help us .
Click to expand...
Click to collapse
You should try to change the radio and rom of your phone. Make sure to Task 29 b4 flashing. Another thing to make sure is you use the right radio, i mean the specific radio for telus, t-mobile or att.....
Wrong radio can also cause such problems.
I have the same issue with my Unlocked Tilt2 on Telus. I found a lot of people with unlocked winmo devices on bell/telus complaining of this problem and never have seen a solution. People say that a Fido sim will do the same thing. Only Rogers sims seem to not show roaming. PLEASE post if you find the solution or even cause of this.
I just did task29 and reflash ROM. I soon as I have the main menu Roaming Icon appear on top just beside or 3G.
Damn!! still stock with this roaming issue
anyone have Q's ?
PROBLEM SOLVED - DEFECTIVE SIM CARD. Thanks everybody !!!
Hi guys,
I really need your help with this one, here's the deal :
1. just bought my second SGS from vodaphone CH last week.
2. the phone came with 2.1 stock
3. i was not able to get data connection (able to make phonecalls and sms, but no 3g)
4. my apn settings are correct (i have another sgs configured same way on same network)
5. decided to upgrade to 2.2 (JPH) hoped this would help - NO
6. updated MODEM & CSC to the SAME ones working on my second SGS - STILL NOT WORKING
what else could it be ???
THANK YOU FOR YOUR HELP
did you install DroidWall ?
Nope,
Never heard of that Apo.
Can it help ?
dial *#0011#
see what if you are on data
Here's a screenshot
AllGamer said:
dial *#0011#
see what if you are on data
Click to expand...
Click to collapse
Here's what's there, can you see what is wrong ?
Try this, worked for me
This is a weird coincidence. I have (had!) the exact same problem.
My problem was when I reflashed my galaxy S with stock firmware back again, I lost 3g connection. Using a different sim (which supports only Edge) I was able to get edge connection but with my sim, there was no connection.
Here's what I did. It seems when you select the band selection to "Automatic" it somehow didnt get registered properly even though it showed up on the settings->Wireless and network->Mobile networks->NetworkMode. Even though it read GSM/WCDMA (auto mode) it wasnt actually the case.
So - type *#2263# on your phone to enter the Service Mode's Band Selection.
There see if first row is [1] AUTOMATIC[] OR [1] AUTOMATIC[*]
In my case it wasnt selected ie. there was no *. So I clicked on it and did that selection myself and baam!! H connection. It connected even before I exited from service mode.
I tried a 2g and 3g card after that multiple times and it connects properly to E or H from then on.
Give it a try. I am hoping that your APN is set properly.
Anup
Thanks for the help, but unfortunately this didn't work :-(
1. Automatic was selected.
2. Ive tried to play around with the options there and within the mobile networks.
Nothing works ... this is so frustrating :-(
Sent from my GT-I9000 using XDA App
up.........................................................................
Why didn't you just call Vodafone and get their help before flashing the phone If you already have another SGS configured same way at the same location with 3G, then chances are there is a hardware problem with the phone.
Anyways, try contacting vodafone, they might still do something about it (despite the fact you have voided their warranty by flashing).
PhoenixFx said:
Why didn't you just call Vodafone and get their help before flashing the phone If you already have another SGS configured same way at the same location with 3G, then chances are there is a hardware problem with the phone.
Anyways, try contacting vodafone, they might still do something about it (despite the fact you have voided their warranty by flashing).
Click to expand...
Click to collapse
The problem is that I'm not from Czech Republic. The phone was purchased there by a friend of mine and brought to me...