I have 3 sets of headphones. The first two i had because of my previous ppc and they did work fine with my tilt. But for some reason they stopped working properly. I could hear who ever i was talking to but they couldnt hear me. So i bought a third headphone thinkin it was something wrong with the other two but i have the same problem. Can somebody please help me. thanks
sounds like the port of your phone is messed up. Hopefully it's some software problem that someone has a cab file for.
Related
Hi,
Does anybody else have a problem with microphone when loudspeaker is on during a call? Ive had quite a few people complaining that they cant hear me when Ive got the speaker on. As soon as I switch off the speaker, they can hear me fine. Does not matter if I place the mic close to me or move it further away, they still say they have trouble hearing me with speaker on.
Any ideas if I can resolve this? Have tried AGC setting with no success.
Thanks
I have the same problem for a while. Can't use speaker phone. It was working fine before so I am thinking some of the software that I installed render the speaker useless. I will try to backup everything and then do a hard reset to see if the problem still exists.
My Friend; I have the Same Case in my Kaiser and I post yesterday this issue but with no luck . we have to find a solution for this bugs, I tried something it might improve it a little ; during the call reduce the Speaker volume to be 2 degree only and it might help. But we have to know if it is a common in all devices or not
I tried the Hard reset but it is smae and no luck yet
I just tried the method proposed in abother thread here and it fixed the problem! I disabled the Microphone AGC in the phone setting and it works fine now. Save me some hassle.
are you sure of disable AGC as I tried but it is the same result
i have the same problem, and i don't have the auto mic gain enabled. i haven't hard reset yet, but it stopped working properly after i installed resco voice recorder and/or vito voice...
Looking at another thread, it may be that the speaker is half duplex. I.e you both cant be speaking at the same time. Wonder if this can be resolved?
My Kaiser comes by default Microphone AGC disabled, and the problem persists. Any suggestion???? thanks.
tsangwc said:
I just tried the method proposed in abother thread here and it fixed the problem! I disabled the Microphone AGC in the phone setting and it works fine now. Save me some hassle.
Click to expand...
Click to collapse
rocho said:
My Kaiser comes by default Microphone AGC disabled, and the problem persists. Any suggestion???? thanks.
Click to expand...
Click to collapse
Precisely you are right. I do not think by enabling/disabling the Microphone AGC does help. This is apparently a design fault. I have got my set replaced from the service center but still having the exact problem.
I wonder if HTC can fix this problem! I read from one of the threads somewhere that one of the users found the MDA Vario III works perfect...though they are also of the kaiser family....
wish2006 said:
Precisely you are right. I do not think by enabling/disabling the Microphone AGC does help. This is apparently a design fault. I have got my set replaced from the service center but still having the exact problem.
I wonder if HTC can fix this problem! I read from one of the threads somewhere that one of the users found the MDA Vario III works perfect...though they are also of the kaiser family....
Click to expand...
Click to collapse
Same problem, and i haven't modded mine at all. Using the default ATT ROM and tried speakerphone, couldn't be heard...
I had the same problem when using my TyTn and attempting to use the speaker phone. I was hoping this would be resolved in the TyTn II but it's the same problem where the person you speaking to complains they can't hear you properly.
I think its a common problem in this model as my device is brand new and same problem
Strange. I was making some tests last night, talking to another person using the speakerphone.
It worked just fine most of the time. Her voice was a little distorted due to the bad quality (maybe just bad equalization) of the speaker, but she told me she could hear me well. She told that even though I was speaking far from the mic and not that loud, the sound came just clear to her. The only thing she noticed was that I sounded like an answering machine .I also tested running some programs while speaking to her.. and then, coincidence or not, she heard some static for a second or two.
I also tested speaking while she was also speaking, and we both heard each other. It worked as a full-duplex.
I must say that it was late at night, so it was all silent. Except when my dog started barking, he was far away at the yard, and she heard him too.
I used it some days ago while driving, and she couldn't hear me. I had the radio on, and there was traffic sound and stuff. I had to turn the speaker off because I was driving and I was in a hurry, so I couldn't test any further.
Later on, I tested it with my girlfriend when we both were in my car and I was driving. She said she could hear me, but then it started echoing due to the loudness of my speaker, and that was all we could test.
I had Microphone AGC disabled in all tests.
I have the same problem... the other person cannot hear me when i am on speaker
i have the same problem!!!
This is a serious problem it appears most of us are having with the speaker phone microphone.
Has anyone logged this problem with HTC?
It looks like a s/w update will be required to fix?
I am using with an MDA Vario III UK and it seems to be working fine, I have not had any problems even after installing software or by having AVG on or off.
There is a problem if both parties speak at the same time where either person may not hear the other, I think that is to do with a duplex problem mentioned earlier in the thread.
It appears a number of people have the problem and a number do not. It may be software version related.
I am using the following software on an AT&T Tilt:
ROM version: 1.57.502.2
Radio version: 22.45.88.07H
We need to find a pattern with the problem, Can others share what software they are running and if they have the microphone problem?
Speaker problem is software
I can confirm that it is a software problem. When I recieved my MDA Vario III didn't had the speaker problem but as soon as I flashed my device with either the kaiser or tytn II rom the problem occured. Don't know how to solve it...
Hi, I have an AT&T Tilt and am using one of Duttythory's cooked roms from a few weeks back. I also have a Motorola HT820 bluetooth wireless stereo headset. Normally, everything is great, but on specific mp3s I have some audio trouble. These mp3s all have hard left/hard right audio - notably Beatles tunes. On the quiet channel I get a ton of crackle. Pairing with my laptop I do not get this crackle. Given that, I assume it has something to do with the bluetooth stack on my Kaiser.
Has anyone else run into this problem before? Is there something I can do to fix this problem, or maybe one of Dutty's new roms addresses this?
i have this exact same problem. doesn't matter what audio gets played. anyone have a clue???
tastum said:
Hi, I have an AT&T Tilt and am using one of Duttythory's cooked roms from a few weeks back. I also have a Motorola HT820 bluetooth wireless stereo headset. Normally, everything is great, but on specific mp3s I have some audio trouble. These mp3s all have hard left/hard right audio - notably Beatles tunes. On the quiet channel I get a ton of crackle. Pairing with my laptop I do not get this crackle. Given that, I assume it has something to do with the bluetooth stack on my Kaiser.
Has anyone else run into this problem before? Is there something I can do to fix this problem, or maybe one of Dutty's new roms addresses this?
Click to expand...
Click to collapse
Can you point me to some specific tunes having this problem? You can even send me the MP3 - PM me and I PM you my e-mail address. Or, alternatively, attach the MP3 in a ZIP file.
doesn't matter which song i listen too. could be any of the thousands that i have. i got att to replace my phone under warranty. when i got the replacement i did a master reset and tried again. seemed to work perfectly after that. must have messed up the bluetooth stack somewhere/somehow. apparently nothing wrong with the phone itself. oh well...its working on my new tilt so far...now i'm having the skipping problem, grrr!
hello again everyone!!!
i just got a set of blueant x5i stereo bluetooth headphones yesterday... they look cool and feel cool... call quality is great...
but the mp3 sound through my tmobile wing is HORRIBLE!!! i tried the headphones on my co-worker's t-mobile dash and they sound awesome... i can't figure out why they sound so muddy and crackly on my phone... is there a setting somewhere that i am missing??? perhaps a firmware upgrade for my phone that would solve this issue???
any help or insight would be greatly appreciated...
thanks in advance,
bennie
How does playback sound through the included (if any headset) or through the loud speaker? If it sounds good (normal) through those then its most likely a blue tooth problem. When you sync it up are you around anything that could possibly interfere with it during the sync process? There have been a few times when I am making a call (rare) but it wont get a good connection and everything will sound like I am under water or worse. (more with my old phone having a crappy radio)
If you have sync'd the two a fair ammount of times and its always the same sounding quality might look on the T-Moble Wings forum (this is the HTC s730) and see if other users have had the same problem. I wouldnt see it having a bad HTC driver, but it might not be very compatable with that headset?
its hard to judge sound the the loud speaker... it sounds bad no matter what...
when hard wired through the headphones that came with the unit, the mp3 playback is fine... its not crackly like this headset is... i tried resyncing a few times as far away from everything as i could so there would be no interference... i never sync my music files though bluetooth so i know that the files aren't getting corrupted... they are going through usb...
i think it has something to do with the phone...
Double check the compatability on the headset, if it plays fine through the USB headphones, and the headset sounds perfectly fine on another phone...
What version is the heatset? blue tooth 2 or whatever the newer version is? I know the phone supports it but something else might have changed? Just something to look into.
Aside from a firmware flash or some software bug I cant think of anything else If the compatability show's up that it should work might try calling HTC's support line?
i contacted blueant before purchase and they assured me the headset is compatible... also tmobile claims that its compatible as well... they even have tmobile packaed oem boxes for this particular headset... the hardware protocols also line up... technically, everything should work!!!
i already contacted htc with regards to this issue... this was their reply:
Thank you for your inquiry in regards to Bluetooth headset stereo issue.
Ben, I know how important it is for you to have the bluetooth headset working properly, Unfortunately there is no updates or patch available for the T-mobile wing to fix the issue, although T-mobile might have a ROM upgrade. The reason why the T-mobile dash had no issues with the headset is because it has different drivers for bluetooth support. Look into possibly upgrading the device rom to try and resolve the issue, otherwise you'll need to purchase another headset which is compatible with the device.
i looked into updating the rom and it appears that i have the newest version: 4.10.531.3 WWE from march 15th 07... i wasnt' able to find anything newer... does someone else know of a newer version for the hera110???
Hmm, might be something in T-Mobiles software that is nerfing your set... Not sure of what though...
First post so go easy guys. I was able to flash a ROM and a few other things with no questions using search and just doing the leg work. I am sure the answer to my question is right under my nose but I haven't been able to word it correctly or something.
I have a Tilt using Dutty's 5.2.19716ROM (4/29/08). I am also using radio 1.65.14.06. I never changed it because everything was working rather well and didn't see the point.
Here is my problem. I have a motorola S9. In it's profile it is showing both wireless stereo and hands free. Ok now sound is actually very good and range is nice but it is not in stereo. I can maybe hear just a twinge of music in one ear but I am not sure, the other sounds like a champ. I can hear and answer incoming calls but no one can hear me on the other end. Lastly I can answer calls and use the volume keys on the headset but not any of the media player controls work, (next track, previous track, play/pause). Also skipping or lag is there but not that bad at all.
I tried the setting suggestion in the registry that was supposed to be set to "0" to turn on stereo but it was already at "0". (sorry forgot the path).
Thanks so much for any help in the right direction.
I am thinking about changing the radio. Also I am going to test the headset to make sure it isn't the problem. I have seen that most people haven't noticed any difference by changing the ROM. Anyone think it could be a radio issue?
I feel stupid as I tried to test the headset right away but didn't have a phone that was A2DP capable handy. I got my old phone a Sony w580i and set it up with the headset and it had the exact same problem. I am assuming that it must be a faulty headset? This reminds me of real life. I am talking to myself and answering my own questions.
thats the way to go... step by step troubleshooting...
I was wondering if anyone familiar with the Dream hardware knew if it was possible to replace the mic, and where I might buy one. For no reason that I can determine, my outgoing volume is suddenly 10% of what it used to be. I've tried multiple ROM's but the issue persists. Currently running Amon_RA 1.5.2, Danger SPL, Cyanogen 4.2.12.2 if anybody has a software solution I haven't thought of feel free to chime in as well.
Thanks
did you try using the head phones that came with the g1?
?? I can hear people fine, they can't hear me.
the headphones that came with the g1 have a microphone, and headphones that you can plug into the microphone
Good to know, unfortunately I don't have those headphones. Bought the phone off Craigslist. Worked fine for about 6 months before this happened to me. Maybe I'll see if I can find the headphones on the web somewhere.